Stearic acid is an 18 carbon saturated fatty acid lipid with excellent hydrophobicity. PEG modified stearic acid is an excellent amphilphilic polymer with both hydrophilicity and hydrophobility. Pegylated lipids are excellent liposome formation materials that can be used for drug delivery, gene transfection and vaccine delivery as well. These materials can also be used for targeted drug delivery by modifying their surfaces with targeting ligands such as antibodies, peptides.
Specifiche
Specifiche e purezza
MW 3400 Da
Condizioni di conservazione di stoccaggio
Room temperature
Spedito in
Normal
Dati avanzati
Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Find and download the COA for your product by matching the lot number on the packaging.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
No tested application protocols, recommended dilutions, or QC-verified methods are provided for this SKU.
General suggestions (not item-specific; validate in your lab)
Stock solutions: Prepare in anhydrous DMSO or ethanol; filter through 0.22 µm PTFE if needed.
Liposome incorporation: Use film hydration or post-insertion methods as outlined under Reaction Conditions; verify incorporation by UV–Vis of folate.
Storage of working solutions: Short-term at 2–8 °C protected from light; avoid microbial contamination of aqueous dispersions.
For standardized, item-specific protocols, refer to the CoA/Spec Sheet when available.
Biological Roles
General background (literature; not item-specific claims)
Folic acid is a vitamin B9 derivative involved in one-carbon metabolism, essential for nucleotide biosynthesis and methylation pathways. The folate moiety binds to folate-binding entities and can be used in model systems to study folate recognition phenomena.
PEGylation provides a hydrated steric corona, modulating nonspecific interactions and prolonging colloidal stability in complex media.
Stearic acid (C18:0) is a saturated fatty acid that anchors the conjugate into hydrophobic domains such as lipid bilayers, micelles, or hydrophobic polymer matrices.
Relevance to research use
Amphiphilic folate–PEG–lipid constructs are widely used in laboratories to present folate at interfaces in biophysical or materials-science studies, enabling investigation of ligand density, spacer length, and partitioning effects on binding in vitro.
The interplay of PEG length and hydrophobic anchor strength controls surface presentation, lateral mobility, and accessibility of the folate moiety in model membranes.
Note: No biological activity or clinical performance is claimed for this product. All uses are for research and laboratory development only.
Buffer Applications
This product is not a buffering agent and does not establish defined pH ranges. It is typically incorporated into colloidal systems or organic solvent mixtures rather than used to make buffers.
Practical note (literature)
When formulating dispersions, common buffers such as PBS (pH 7.4) or HEPES (pH 7.2–7.6) are used to maintain medium pH while the amphiphile integrates into particles or membranes. Pre-dissolve the conjugate in a miscible organic solvent (e.g., ethanol or DMSO), then add to buffer under rapid mixing to avoid precipitation.
No item-specific buffer recipes or concentrations are provided for this SKU.
Green Alternatives
Considerations
The conjugate itself is a specialty amphiphile; green chemistry considerations mainly involve solvent choices during dissolution, film casting, and purification.
Greener solvent options (literature guidance)
Instead of chloroform/dichloromethane: Use cyclopentyl methyl ether (CPME) or 2-methyltetrahydrofuran (2-MeTHF) where solubility is adequate; both have improved environmental profiles and higher boiling points for safer handling.
Alcohols: Ethanol or isopropanol can often replace methanol or acetone for stock solutions and antisolvent precipitation, with lower toxicity and good biodegradability.
Aqueous processes: Employ ethanol or DMSO cosolvent mini-quantities during nanoprecipitation into buffered saline to minimize bulk organic use.
Trade-offs
Solubility: Chlorinated solvents generally provide superior solubility for folate-bearing amphiphiles; greener ethers/alcohols may require warming, sonication, or longer dissolution times.
Process control: Higher-boiling green ethers slow evaporation during thin-film preparation, affecting film uniformity; adjust rotary evaporation parameters accordingly.
Stability: Folate chromophores can be light/oxidation sensitive; greener solvents do not inherently mitigate this—use antioxidants or inert atmosphere if required.
Recommendation
Start with ethanol or 2-MeTHF for dissolution trials. If complete solubility is not achieved at process-relevant concentrations, escalate to mixed systems (e.g., 2-MeTHF:ethanol) before resorting to chlorinated solvents. Validate residual solvent removal by GC as appropriate.
Pharmaceutical Uses
No pharmacopeial status, excipient designation, or clinical use is provided for this item.
General formulation context (literature; research only)
Amphiphilic PEG–lipid–ligand conjugates like stearoyl–PEG–folate are studied in research settings as components of model delivery systems, where they serve to modulate surface properties and present a folate motif at interfaces.
Roles in research formulations: surface ligand presentation, steric stabilization via PEG corona, modulation of colloidal stability, and control of interfacial interactions.
Manufacturing and analytical considerations (general)
Residual solvents: Ensure removal to acceptable research limits via vacuum drying and confirm by GC.
Characterization: Use UV–Vis of folate chromophore, NMR, and SEC/GPC (for PEG dispersity) to verify lot-to-lot consistency.
All statements pertain to research/formulation development only. No medical or clinical claims are made.
Physical Properties
Item-specific facts (from Product Data)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Storage: Room temperature. Shipped: Normal.
General/typical properties for stearoyl–PEG–folate conjugates (literature)
Physical state: Often a waxy solid or off-white powder at ambient temperature; amphiphilic and prone to self-assembly into micelles or insert into bilayers.
Solubility: Readily soluble in polar aprotic organics (DMSO, DMF) and alcohols (ethanol) and in chlorinated solvents (CHCl3, CH2Cl2); limited direct solubility in pure water but may disperse as micelles or incorporate into liposomes in aqueous media.
Critical micelle behavior: PEG–lipid–ligand amphiphiles can form micelles above a system-dependent CMC; CMC decreases with longer hydrophobe and PEG length (literature trend).
LogP: Not applicable as a single value due to amphiphilicity; overall behavior is surface-active (literature).
pKa: Folic acid substructure contains acidic carboxylates (pKa values in the 3–5 range for free folate carboxyls, literature); effective acidity may shift upon conjugation.
Thermal behavior: PEG segments exhibit a glass transition; melting transitions are broad; avoid overheating to prevent degradation of folate (literature guidance).
Note: No item-specific numeric values (mp, bp, density, RI) are provided for this SKU. For definitive specifications, consult the CoA/Spec Sheet.
Quality and Grades
Item-specific facts
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
How to evaluate quality for Stearic acid PEG Folate (general guidance)
PEG characteristics: Key quality attributes include PEG average molecular weight (n, dispersity Ð), substitution level (functionalization at one or both termini), and residual low-MW PEG content. These parameters influence micelle/liposome incorporation and ligand density reproducibility.
Conjugation site on folate: Many suppliers attach PEG at the γ- or α-carboxyl of the glutamate or via tailored linkers on p-aminobenzoate. Attachment position impacts receptor recognition minimally when using γ-linkage (literature), but verify on the CoA.
Residuals/impurities: Unreacted folic acid, free stearic acid, and coupling byproducts should be minimized. For sensitive applications (e.g., nanoparticle formulation), low residual solvent and accurate assay are desirable.
Analytical controls: Typical characterization employs 1H/13C NMR (broad PEG resonance), MALDI-TOF/ESI for average MW, HPLC/UPLC for ligand content, and UV–Vis (folate absorbance ~280–363 nm, literature) for quantitation. Exact test methods and limits are item-specific; refer to CoA.
Stabilizers: Not specified for this item; refer to CoA/Spec Sheet.
Recommendation: Confirm PEG length, folate loading, and assay/purity on the CoA prior to method development to ensure consistent targeting ligand density.
Reaction and Applications
Item-specific applications provided: None beyond “For research use only.”
General research applications for stearoyl–PEG–folate (literature)
Targeted nanomaterials: Serves as a folate-presenting amphiphile for ligand-directed association with folate-binding entities in model systems. Commonly blended at low mol% with helper lipids or polymers to decorate particle surfaces.
Liposome and micelle formulation: Incorporated by co-dissolution/film hydration or post-insertion to present folate at the interface. PEG spacer imparts steric stabilization and controls ligand accessibility.
Surface modification: Adsorption or covalent immobilization onto hydrophobic surfaces or polymeric nanoparticles to tune zeta potential, colloidal stability, and ligand density.
Assay development: Model ligand for studying folate–ligand interactions, partitioning behavior of amphiphiles, or PEG-length effects.
Practical tips (literature)
Control molar ratio: Typical exploratory ranges are 0.5–5 mol% relative to bulk lipids/polymers; optimize empirically to balance stability and surface coverage.
Pre-dissolution: Prepare a clear stock in DMSO or ethanol. Add slowly to rapidly stirred aqueous media to avoid local supersaturation.
Temperature: For bilayer insertion, work above the highest Tm of the lipid components; mild heating (e.g., 50–60 °C) and incubation for 30–60 min aid insertion.
Quantification: UV–Vis of folate chromophore can estimate incorporation using extinction coefficients determined for the specific conjugate (calibrate for your medium).
Reaction Conditions
No item-specific reaction or formulation conditions are provided. The following are general, literature-based guidelines for amphiphile incorporation; validate experimentally.
Co-dissolution and thin-film hydration
Solvent: CHCl3:MeOH (2:1) or ethanol for greener practice; dissolve all components together.
Film formation: Rotary evaporate under reduced pressure at 30–40 °C to a uniform film; dry under high vacuum ≥2 h to remove residual solvents.
Hydration: Add buffer preheated above the highest lipid Tm (e.g., 50–60 °C) and vortex/sonicate. Typical folate–PEG–lipid content: 0.5–5 mol% of total lipid (optimize empirically).
Post-insertion into pre-formed vesicles (literature)
Prepare a concentrated ethanolic stock (e.g., 5–20 mg/mL). Add dropwise to vesicles at 0.5–2 mol% while maintaining 50–60 °C with gentle stirring for 30–60 min. Remove ethanol by dialysis or size-exclusion.
Nanoprecipitation into polymer matrices
Dissolve polymer and conjugate in a water-miscible organic solvent (e.g., acetone/ethanol). Inject into aqueous phase under vigorous stirring; age 10–30 min; purify by filtration/centrifugation.
Analytical checkpoints
Quantify folate by UV–Vis; assess size/zeta by DLS; confirm incorporation by chromatography or fluorescence quenching assays as appropriate.
These conditions are general references; adjust to the specific system.
Safety and Handling
Item-specific hazard data
Signal word: Not specified for this item; refer to SDS.
H-Statements / GHS classification / Pictograms: Not specified for this item; refer to SDS.
General laboratory safety for PEG–lipid–folate conjugates (literature/standard practice)
PPE: Laboratory coat, appropriate chemical-resistant gloves (e.g., nitrile), and safety glasses. Use in a fume hood when weighing or dissolving in volatile organic solvents.
Incompatibilities: Strong oxidizers and strong acids/bases may degrade folate and/or PEG linkages. Avoid prolonged exposure to elevated temperatures and light to minimize folate oxidation.
Handling tips: These amphiphiles can be hygroscopic and static-prone. Minimize moisture ingress; if provided as a powder/film, use dry tools and promptly recap. When preparing stock solutions in DMSO/ethanol, use anhydrous solvents for best stability.
First aid overview: Skin/eye contact—rinse with water for several minutes; remove contaminated clothing. Inhalation—move to fresh air. Ingestion—rinse mouth. Seek medical attention as needed. Defer to the product SDS for authoritative instructions.
Waste: Collect solutions and rinses containing organic solvents in appropriate halogenated/non-halogenated containers. Do not discharge to drain.
Always consult the official SDS for S164305 before use; the SDS supersedes general guidance.
Solvent Selection
General solvation profile (literature for PEG–lipid–folate amphiphiles)
Highly compatible: DMSO, DMF, NMP, ethanol, isopropanol, methanol, chloroform, dichloromethane. These dissolve both the PEG chain and the stearoyl moiety while keeping folate in solution.
Partial/condition-dependent: Acetone and acetonitrile may dissolve at moderate concentrations; warming and sonication can help.
Aqueous systems: Limited true solubility; disperses as micelles or incorporates into liposomes/micelles with surfactants or co-lipids. Use buffered saline or HEPES with co-solvent for pre-dissolution when needed.
When to choose what
Stock preparation: For accurate dosing, prepare concentrated stocks in anhydrous DMSO or ethanol, then dilute into aqueous media with vigorous mixing to avoid precipitation.
Lipid film hydration: Dissolve together with other lipids in chloroform or chloroform:methanol, form a thin film, then hydrate above bilayer Tm to incorporate.
Post-insertion: Use ethanol or isopropanol to deliver small aliquots into pre-formed vesicles at controlled temperatures.
Quick comparison (literature)
DMSO vs ethanol: DMSO offers higher solubility for folate moieties; ethanol is more volatile and often preferred for nanoparticle precipitation.
Chloroform vs CPME/2-MeTHF: Chlorinated solvents maximize solubility during film casting, while ethers (CPME/2-MeTHF) are greener but may require heating/sonication to fully dissolve.
Item-specific solvent limits are not provided; consult the CoA/Spec Sheet and validate for your system.
Storage and Reconstitution
Item-specific facts
Storage conditions: Room temperature.
Shipped in: Normal.
General handling and reconstitution guidance (literature)
Protection: Store in a tightly closed container, desiccated, protected from light to minimize folate oxidation. While room temperature is acceptable per product data, cool, dry storage is often beneficial for long-term stability.
Reconstitution: For concentrated stocks, dissolve in anhydrous DMSO or ethanol with gentle warming (≤40 °C) and sonication if necessary until a clear solution is obtained. For film casting, chloroform or a chloroform:methanol mixture can be used where compatible with your EHS policies.
Aqueous dispersion: Introduce organic stock slowly into buffered aqueous media under vigorous stirring to avoid precipitation; consider mild heating for bilayer systems.
Aliquoting: Prepare single-use aliquots to avoid repeated freeze–thaw or moisture cycling. If freezing solutions, use tightly sealed amber vials and avoid frost exposure.
Stability monitoring: Inspect for turbidity, phase separation, or color change of folate chromophore; discard if significant changes are observed.
Note: No item-specific solvent preferences, concentration limits, or shelf-life are provided. For definitive instructions, consult the CoA/Spec Sheet and SDS.
CAS: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey/SMILES: Not specified for this item; refer to CoA/Spec Sheet.
General structural description (literature/typical for this class)
Architecture: An amphiphilic conjugate comprising a hydrophobic stearic acid (C18:0) tail covalently linked to folic acid via a polyethylene glycol (PEG) spacer.
Functional groups: Long-chain fatty acid (typically as amide or ester to PEG), PEG polyether chain (–CH2–CH2–O– repeated), and folic acid (pterin–p-aminobenzoate–glutamate) containing multiple carboxylates and aromatic heterocycles.
Connectivity (typical): stearoyl–(PEG)n–folate, where n denotes the average ethylene oxide repeat number (often specified on CoA as PEG length or nominal MW).
Stereochemistry: Folic acid bears the L-glutamate residue; no stereocenter is expected in stearic acid or PEG. Overall conjugate stereochemistry is dominated by the L-configuration at glutamate (literature).
2D structure (verbal): Left: linear C18 alkyl terminating in a carbonyl; center: flexible PEG chain; right: bicyclic pterin fused system attached to p-aminobenzoate and an L-glutamate residue, with terminal carboxyl groups.
Note: Exact linkage chemistry (amide vs ester, attachment site on folate) and PEG length are not specified for this item; refer to CoA/Spec Sheet.
Synthetic Utility
As supplied, Stearic acid PEG Folate functions primarily as a pre-assembled amphiphilic ligand rather than a small-molecule building block.
Utility in synthesis and materials assembly (literature)
Modular assembly: Enables rapid construction of functionalized liposomes, micelles, and polymer nanoparticles without additional covalent chemistry—mixing/co-assembly provides surface presentation of folate.
Post-functionalization: The PEG terminus opposite folate is commonly capped by the stearoyl group; reactive handles (if any) would be specified on the CoA. In the absence of a defined handle, covalent downstream chemistry is limited; focus shifts to supramolecular incorporation.
Retrosynthetic perspective: The conjugate replaces separate steps of lipidation, PEGylation, and folate coupling, reducing synthetic burden when building folate-decorated interfaces.
Analytical leverage
The folate chromophore provides a convenient spectroscopic tag for quantifying incorporation and estimating surface density in assembled systems.
Note: Reactive functional groups or orthogonal handles are not specified for this item; consult the CoA/Spec Sheet if covalent coupling to other substrates is intended.
Target Specificity
Item-specific target, epitope, or binding specificity information is not provided for this product.
Note
If receptor/ligand binding characteristics, affinity data, or tested biological targets are critical to your application, please consult the CoA/Spec Sheet or contact technical support with your SKU (S164305) for any available characterization data.
Domande frequenti
How should this product be stored?
Store at room temperature.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.