Thiol PEG Amine, HS-PEG-NH2 - ≥95%, MW 600 Da

Cat. No.: T164370
Disponibile su ordine
QUALITÀ & PUREZZA ≥95% MW 600 Da
Storage
Protected from light,Store at -20°C,Argon charged
Shipped In
Ice chest + Ice pads
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
100mg
T164370-100mg
—
1 Disponibile
141,35€
500mg
T164370-500mg
—
2 Disponibile
408,62€
Enter a quantity for the sizes you want to add.

Panoramica

Heterobifunctional PEG derivative that can be used to modify proteins, peptides and other materials via amino or other acid reactive chemical groups. PEGylation can increase solubility and stability and reduce immunogenicity of peptides and proteins. It can also suppress the non-specific binding of charged molecules to the modified surfaces. .

Specifiche

Specifiche e purezza
≥95%, MW 600 Da
Condizioni di conservazione di stoccaggio
Protected from light,Store at -20°C,Argon charged
Spedito in
Ice chest + Ice pads
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.
Purezza
≥95%

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

2 results found

Lot NumberCertificate TypeDataOggetto
C2212074C2212074Certificate of AnalysisDec 10, 2024 T164370
C2212075C2212075Certificate of AnalysisDec 10, 2024 T164370
Proprietà chimiche e fisiche
SolubilitàOff-white/white solid or viscous liquid depends on molecule weight;Soluble in regular aqeous solution as well as most organic solvents;
Sensibilitàlight sensitive
Domande frequenti e articoli
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

No item-specific, validated protocols are provided for this SKU. Refer to CoA/Spec Sheet for any lot-specific guidance.

General workflow examples (literature guidance)

  • Thiol–maleimide protein conjugation:
    1. Prepare protein with maleimide handle in degassed HEPES, pH 7.0, 1–5 mM EDTA.
    2. Dissolve HS–PEG–NH2 in the same buffer (or with ≤10% DMSO) immediately before use.
    3. Mix at 1.2–1.5 equiv PEG per maleimide; react 1 h at RT.
    4. Quench residual maleimide with cysteine; purify by SEC.
  • Amide coupling of –NH2 end to a carboxylic acid small molecule:
    1. Dry DMF, add carboxylic acid (1.0 eq), HATU (1.1 eq), DIPEA (2.0 eq); pre-activate 5 min.
    2. Add HS–PEG–NH2 (1.1 eq); stir 2–6 h at RT.
    3. Workup by precipitation into ether or dialysis, as appropriate; verify by NMR and SEC.

These examples are starting points; optimize stoichiometry, pH, and solvents for your specific system.

Biological Roles

Context (general, not product-specific claims)

  • Poly(ethylene glycol) (PEG) is biologically inert and hydrophilic; it imparts “stealth” characteristics that reduce nonspecific interactions and protein adsorption (protein-repellent surfaces; literature).
  • The thiol terminus provides chemoselective reactivity toward cysteine residues or maleimide tags on biomolecules; the amine terminus enables amide formation with activated carboxylates on biomolecules or surfaces.
  • Linker function: HS–PEG–NH2 acts as a spacer that can improve conjugate solubility, reduce steric hindrance, and enhance the bioavailability of attached entities in experimental systems.

Biochemical compatibility (literature)

  • Typical conjugation to proteins proceeds under near-physiological conditions, preserving activity better than harsh organic methods.
  • PEG chains reduce immunogenic adsorption in vitro and mitigate aggregation by steric stabilization of nanoparticles and colloids.

Considerations

  • End-group reactivity must be matched to the biological target: thiol-selective steps should avoid oxidizing conditions; amine couplings should avoid excessive pH that can denature proteins.
  • Post-conjugation characterization: SEC, DLS (for nanoparticles), and SDS-PAGE/MS (for proteins) to verify degree of modification.

Note: For research use only. No clinical/therapeutic claims are made for this product.

Buffer Applications

This product is a bifunctional linker rather than a classical buffering agent; however, buffers are critical for its use in bioconjugation.

Typical buffer systems (literature guidance)

  • Thiol–maleimide coupling: Phosphate or HEPES buffer, pH 6.5–7.2; include 1–5 mM EDTA to chelate metals; degas to limit thiol oxidation. Avoid primary amine buffers (e.g., Tris) that can compete with coupling.
  • NHS-ester capture onto the –NH2 end (or amide formation with the –NH2 onto activated partners): Use phosphate or HEPES, pH 7.5–8.5 for efficient amine nucleophilicity. Avoid buffers with nucleophilic amines (Tris) during activation/coupling.
  • Disulfide exchange: Mildly basic buffers (pH 7.5–8.0) with reducing agent control (e.g., TCEP) when applicable.

Practical tips

  • Degassing: Nitrogen/argon sparging or vacuum cycles reduce dissolved oxygen.
  • Additives: 5–20% DMSO/DMF can be used to solubilize hydrophobic partners while maintaining protein stability.
  • Quenching: Residual maleimide on targets can be quenched with excess cysteine or 2-mercaptoethanol after coupling to prevent over-labeling.

Prepare all buffers freshly and filter-sterilize when working with sensitive biomolecules. Verify compatibility with your specific protein or surface.

Green Alternatives

Greener-by-design considerations (general)

  • Solvent choices dominate the environmental footprint for PEG conjugations. Prefer water or water/ethanol systems where feasible. Replace DMF/NMP with safer alternatives (e.g., 2-MeTHF for organic phases, or dimethyl carbonate when compatible).
  • Coupling reagents: Favor less hazardous peptide-coupling systems such as DMTMM or EDC/NHS in aqueous media rather than uronium salts in polar aprotics, when performance allows.
  • Process intensification: Use micellar catalysis (e.g., TPGS-750-M) to run amide couplings in water, reducing organic solvent volumes (literature).

Comparison of approaches (general)

| Aspect | Conventional option | Greener alternative | Trade-offs | |---|---|---|---| | Amide coupling solvent | DMF or NMP | Water, water/EtOH, or 2-MeTHF | Solubility of partners; rate may drop | | Coupling reagent | HATU/HBTU | EDC/NHS, DMTMM | Scope/efficiency vs safety profile | | Thiol–maleimide medium | DMF or DMSO | Aqueous buffer with minimal DMSO cosolvent | Hydrophobe solubility | | Degassing | Argon sparge | Vacuum/N2 cycling or enzymatic O2 scavengers | Setup complexity |

Material choice

  • HS–PEG–NH2 itself is often preferred over hydrophobic linkers to improve aqueous compatibility, reducing reliance on volatile organic solvents during downstream use.

Note: Validate green substitutions at small scale to ensure end-group fidelity and conjugation efficiency.

Pharmaceutical Uses

Formulation and process roles (general; no therapeutic claims)

  • Linker intermediate: HS–PEG–NH2 can serve as a versatile intermediate for preparing pegylated excipients, polymer–drug conjugates, and surface modifiers used in research-scale formulation development.
  • Surface passivation: PEG layers reduce protein adsorption on device or container surfaces in development studies.
  • Conjugation to actives: Provides orthogonal handles to attach a small molecule to a carrier or to bridge two distinct entities in pre-formulation research.

Regulatory/quality considerations (general)

  • For any use in regulated manufacturing, specifications such as MW distribution, residual solvent content, endotoxin/bioburden, and metal content must be qualified. These parameters are lot-specific; consult CoA/Spec Sheet for this SKU.
  • Extractables/leachables: When used on device surfaces or as a process aid, evaluate extractables under ICH-relevant conditions.

Process practicality

  • Aqueous-friendly: PEG increases compatibility with water-based processing, potentially reducing VOC usage.
  • Analytics: Degree of substitution and free-linker residuals should be quantified (SEC, HPLC, LC–MS, colorimetric assays) to ensure batch-to-batch reproducibility.

Note: For research use only. Not intended for human or veterinary use.

Physical Properties

Item-specific specs

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight (Mn/Mw), dispersity (Ð): Not specified for this item; refer to CoA/Spec Sheet.
  • Water/solvent content, residual inhibitors: Not specified for this item; refer to CoA/Spec Sheet.

General/literature characteristics of HS–PEG–NH2

  • Physical state: Typically white to off-white solid or viscous wax depending on nominal MW; highly hygroscopic tendencies reported for low-MW PEGs.
  • Solubility: Freely soluble in water and polar protic solvents (e.g., methanol, ethanol) and many polar aprotic solvents (DMSO, DMF); limited solubility in nonpolar solvents. Actual solubility increases as MW decreases (literature).
  • pKa (terminal amine): ~9–10 for primary aliphatic amines in PEG context (literature, approximate); thiol pKa typically ~8–9 (e.g., alkanethiols), influencing conjugation pH selection.
  • LogP: Overall hydrophilic; effective logP decreases with longer PEG lengths (literature).
  • Viscosity: PEG solutions can be viscous at high concentrations; viscosity rises strongly with MW and concentration (literature).
  • Stability: Thiols can oxidize to disulfides upon air/oxygen exposure; end-capping and inert-atmosphere storage mitigate (literature best practice).

Note: For exact constants (refractive index, water content, polydispersity), consult the CoA/Spec Sheet for this specific SKU.

Quality and Grades

Item-specific grade/purity

  • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.

How to interpret PEG linker quality (general guidance)

  • Nominal molecular weight and dispersity: PEG linkers are characterized by average MW (e.g., 1k, 2k, 5k) and dispersity (Ð). Lower Ð implies tighter chain-length distribution, beneficial for reproducible conjugation.
  • End-group fidelity: Critical for stoichiometric coupling efficiency. Assess by NMR end-group analysis, colorimetric amine/thiol titration (e.g., TNBS for –NH2; Ellman’s for –SH).
  • Residual solvents/metals: Particularly important when using in bioconjugation. CoA typically lists residual solvent and metal content; verify if your process is sensitive.
  • Bioconjugation suitability: Some lots may be offered “bioconjugation grade” with low bioburden, low endotoxin, and high end-group purity; confirm on the Spec Sheet if required.
  • Stabilization: Thiol-terminated PEGs may be supplied under inert gas, sometimes with trace stabilizer or as disulfide-protected precursors; this SKU indicates Argon charged.

Documentation

  • For this SKU, rely on the CoA/Spec Sheet for exact grade, purity, MW, and analytical methods. Request lot-specific data to ensure compatibility with regulated workflows.
Reaction and Applications

Use cases (general/literature)

  • Bioconjugation and surface functionalization: HS–PEG–NH2 acts as a hydrophilic spacer to reduce non-specific binding and improve solubility of conjugates.
  • Site-selective coupling:
    • Thiol terminus: Michael addition to maleimides, vinyl sulfones; thiol–gold chemisorption for surface SAMs; disulfide exchange; thiol–ene photochemistry.
    • Amine terminus: Amide formation with activated esters (NHS), acid chlorides/anhydrides; formation of ureas/thioureas with isocyanates/isothiocyanates; reductive amination to aldehydes.
  • Orthogonal conjugations: Sequential functionalization enables linking of two distinct entities (e.g., a protein cysteine via –SH and a carboxylate-bearing dye via –NH2).

Practical tips

  • Preserve the thiol: Work under inert atmosphere; include EDTA to chelate trace metals; avoid prolonged basic pH. If supplied as free thiol, minimize exposure to air. If disulfide-protected, deprotect immediately before use (e.g., mild reducing agents or specific cleavage conditions—literature).
  • Control selectivity: For thiol–maleimide, pH 6.5–7.2 maximizes thiolate formation while minimizing amine side-reactions; for NHS–amine coupling, pH 7.5–8.5 is typical.
  • Stoichiometry: Calculate based on functional end-group assay rather than nominal PEG mass to account for dispersity.
  • Purification: For small-molecule conjugates, dialysis or SEC removes excess PEG; for protein conjugates, use SEC or affinity methods. Monitor by SDS-PAGE, MALDI, or LC-MS (depending on MW).

Applications expandability

  • Spacer engineering in biosensors, nanoparticle coatings, and polymer–drug intermediates where stealth and spacing are critical.
Reaction Conditions

General literature guidance (optimize per system)

  • Thiol–maleimide Michael addition:
    • Solvent: Aqueous phosphate or HEPES buffer; optional 5–20% DMF/DMSO cosolvent.
    • pH: 6.5–7.2 to favor thiolate without promoting amine side reactions.
    • Temperature: 4–25°C; reaction typically completes within 0.5–2 h.
    • Molar ratios: 1.1–1.5 equiv thiol to maleimide to drive completion.
    • Notes: Degas; include 1–5 mM EDTA. Avoid high pH which causes maleimide ring opening.
  • Amide coupling (amine end to carboxyl partner):
    • Solvent: Dry DMF/DCM/NMP or aqueous EDC/NHS in pH 7.5–8.5 buffer.
    • Reagents: EDC/NHS (aqueous) or HATU/HBTU/COMU (organic) with DIPEA or NMM base.
    • Temperature/time: 20–25°C, 1–12 h depending on sterics.
    • Notes: Control water content in organic media; monitor for over-acylation if other nucleophiles are present.
  • Disulfide exchange:
    • Conditions: pH 7.5–8.0, catalytic base; use controlled equivalents of reducing agents (e.g., TCEP) to generate free thiol just prior to coupling.

Typical outcomes

  • PEGylation reactions often proceed to high conversion when end-group integrity is verified. Purify by SEC, dialysis, or precipitation depending on the conjugate.

All conditions should be validated empirically for the specific MW and partner molecules.

Safety and Handling

Item-specific hazard data

  • Signal word, H-statements, GHS classification, pictograms: Not specified for this item; refer to SDS.

General safety considerations (literature/best practice)

  • Thiol functionality: Susceptible to air oxidation to disulfides; minimize exposure to air, light, and metal ions. Consider handling under inert gas and adding reducing agents (e.g., TCEP) only immediately before use when compatible.
  • Odor: Low-MW thiols can exhibit strong odor; pegylation typically attenuates, but handle in a fume hood.
  • Sensitization/irritation: Primary amines can be skin/eye irritants. Avoid contact and inhalation of dust/aerosols.
  • Incompatibilities: Strong oxidizers (thiol oxidation), acid chlorides/anhydrides (uncontrolled acylation), isocyanates (urea formation), and transition-metal salts that may catalyze oxidation.
  • PPE: Lab coat, safety glasses, and appropriate chemical-resistant gloves (e.g., nitrile). Use in a fume hood.
  • First aid (overview; defer to SDS):
    • Inhalation: Move to fresh air; seek medical attention if symptoms occur.
    • Skin/eye contact: Rinse with plenty of water for at least 15 minutes; remove contaminated clothing; seek medical advice.
    • Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
  • Waste: Collect thiol-containing waste in sealed, labeled containers; avoid vented caps that might allow odor release. Dispose per institutional and local regulations.

Always consult the SDS for authoritative safety information.

Solvent Selection

General solvent behavior (literature)

  • Polarity class: Highly polar, hydrogen-bonding polymer due to ether oxygens; hydrophilic.
  • Miscibility: Typically miscible with water, DMSO, DMF, NMP, alcohols; limited solubility in acetonitrile at higher MW and poor solubility in hydrocarbons/ethers as MW increases.
  • Conjugation context:
    • Aqueous buffers: Preferred for biomolecule coupling; adjust ionic strength/pH to maintain solubility and protect biomolecule activity.
    • Mixed systems: 10–50% organic co-solvent (DMF, DMSO) can help dissolve hydrophobic partners while keeping proteins in solution.
    • Anhydrous organics: For purely synthetic couplings (e.g., to small molecules or surfaces), dry DMF, DCM, or THF may be used when compatible with end groups.

Selection guidance

  • For thiol–maleimide coupling: Use degassed phosphate or HEPES buffer, pH 6.5–7.2, optionally with 10–20% DMF/DMSO to solubilize hydrophobes (literature).
  • For amide bond formation (–NH2 end): Dry DMF, NMP, or DCM with carbodiimide or uronium coupling agents; aqueous activation with NHS esters in pH 7.5–8.5 buffers.
  • Avoid strong oxidants and high-pH (>9) aqueous conditions that accelerate thiol oxidation and potential PEG backbone degradation over time.

Quick comparison (general)

  • Water/HEPES: Best for bioconjugation, mild pH control.
  • DMF/DMSO: Excellent solvating power for small molecules; ensure low water for amide couplings.
  • DCM/THF: Useful in purely organic synthesis or surface modification; verify solubility for the specific PEG MW.
Storage and Reconstitution

Item-specific instructions

  • Storage conditions: Protected from light, Store at -20°C, Argon charged (per product data).
  • Shipped in: Ice chest + ice pads (per product data).

General best practices for HS–PEG–NH2

  • Atmosphere: Maintain under inert gas (argon or nitrogen) to minimize thiol oxidation. Keep containers tightly sealed.
  • Moisture/light: Store dry and away from light. PEGs can be hygroscopic; consider desiccant in secondary containment.
  • Aliquoting: Upon first opening, aliquot into small, inert-atmosphere vials to reduce freeze–thaw and headspace oxygen exposure.
  • Reconstitution: Dissolve in degassed water, buffer, or anhydrous organic solvent as dictated by application. Prepare fresh solutions immediately before use to preserve free thiol content.
  • Stability: Free thiol slowly oxidizes to disulfide upon air exposure; verify free –SH by Ellman’s assay before critical conjugations.
  • Freeze–thaw: Minimize cycles; allow to warm to room temperature in a desiccated, inert atmosphere before opening to prevent moisture condensation.

For precise shelf life and any stabilizers used, consult the CoA/Spec Sheet for this SKU.

Research use only.

Structure and Identity

Heterobifunctional polyethylene glycol (PEG) linker bearing terminal thiol (–SH) and primary amine (–NH2) groups; commonly written HS–PEG–NH2.

Item-specific identifiers

  • CAS: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet. (Note: PEG products are often offered as nominal MW distributions.)
  • SMILES/InChIKey: Not specified for this item; refer to CoA/Spec Sheet.

Structural features (general/literature)

  • Backbone: Repeating ethylene glycol units, –(O–CH2–CH2)n–, providing a flexible, hydrophilic spacer.
  • Functional termini: One terminus is a thiol (–SH) suitable for Michael addition and disulfide chemistry; the other is a primary amine (–NH2) suitable for amide formation and NHS-ester capture.
  • Architecture: Linear, monodisperse-to-polydisperse depending on grade (literature). No defined stereocenters along the PEG chain.
  • 2D description: –SH group at one end; a sequence of ether linkages forming the PEG chain; terminal –CH2–CH2–NH2 at the opposite end.

Identity considerations (general)

  • Heterobifunctional configuration minimizes self-polymerization when appropriately protected/handled.
  • End-group integrity is critical; verify by end-group titration or functional assays prior to sensitive conjugations (literature best practice).
Synthetic Utility

Functional group leverage (general)

  • Thiol end:
    • Michael addition to maleimides, acrylates, vinyl sulfones for rapid, chemoselective conjugation.
    • Disulfide exchange to install cleavable linkages.
    • Au–S bond formation for gold surface immobilization.
  • Amine end:
    • Amide couplings with carboxylic acids/activated esters.
    • Urea/thiourea formation with isocyanates/isothiocyanates.
    • Reductive amination with aldehydes/ketones to form secondary amines.

Retrosynthetic value

  • HS–PEG–NH2 is a modular spacer that introduces aqueous compatibility and distance between functional domains, facilitating assembly of multifunctional constructs (e.g., ligand–spacer–cargo architectures).

Orthogonality and protection

  • Sequence planning allows selective reaction at one end while protecting the other (e.g., temporary thiol protection as disulfide or thioacetate; Boc/Fmoc protection of the amine in purely synthetic sequences—literature).

Analytical control

  • Verify conversions by NMR (end-group resonances), Ellman’s assay (free –SH), TNBS or ninhydrin (free –NH2), and SEC/MALS for conjugate size.

Scale-up considerations

  • Viscosity and mass transfer can limit kinetics at high MW; employ efficient stirring and suitable solvent systems to maintain manageable viscosities.
Target Specificity

Not applicable. This product is a chemical linker (HS–PEG–NH2), not a biological targeting reagent or antibody. It does not possess inherent target specificity beyond the chemical selectivity of its functional groups (thiol toward maleimides/electrophiles; amine toward activated carboxyls). Refer to Reaction & Applications and Synthetic Utility for relevant selectivity information.

Domande frequenti

What is the purity of this product?
This product is supplied at ≥95% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at ?20 °C, protected from light, under argon. It is supplied under an argon blanket; reseal under inert gas after each use.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.