Thiol PEG NHS, HS-PEG-NHS - MW 3400 Da

Cat. No.: T164373
Disponibile su ordine
QUALITÀ & PUREZZA MW 3400 Da
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
100mg
T164373-100mg
—
2 Disponibile

102,31€

120,53€
Salva 18,22 € (15.12%)
500mg
T164373-500mg
—
2 Disponibile

357,42€

418,16€
Salva 60,74 € (14.53%)
Enter a quantity for the sizes you want to add.

Panoramica

Heterobifunctional PEG derivative that can be used to modify proteins, peptides and other materials via amino or other acid reactive chemical groups. PEGylation can increase solubility and stability and reduce immunogenicity of peptides and proteins. It can also suppress the non-specific binding of charged molecules to the modified surfaces. .

Specifiche

Specifiche e purezza
MW 3400 Da
Condizioni di conservazione di stoccaggio
Store at -20°C
Spedito in
Ice chest + Ice pads
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

5 results found

Lot NumberCertificate TypeDataOggetto
A2629048A2629048Certificate of AnalysisFeb 07, 2026 T164373
C23081422C23081422Certificate of AnalysisJan 12, 2026 T164373
C23081432C23081432Certificate of AnalysisJan 12, 2026 T164373
B2426181B2426181Certificate of AnalysisDec 01, 2022 T164373
E2512102E2512102Certificate of AnalysisDec 01, 2022 T164373
Proprietà chimiche e fisiche
SolubilitàOff-white/white solid or viscous liquid depends on molecule weight;Soluble in regular aqeous solution as well as most organic solvents;
SensibilitàLight sensitive
Domande frequenti e articoli
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

No item-specific, vendor-validated protocols are provided for this entry. General example workflows are provided for guidance only.

Example 1: Amine labeling on a protein

  • Dissolve HS-PEG-NHS in dry DMSO at 50 mM. Prepare protein in 50 mM phosphate, 150 mM NaCl, pH 7.8, with 1 mM EDTA.
  • Add linker to protein to reach 10–20× molar excess vs. estimated accessible lysines; keep final DMSO ≤10%.
  • Incubate 30–60 min at RT. Quench with 20 mM ethanolamine, 15 min.
  • Desalt via spin column or SEC. Verify labeling by mass shift and Ellman’s assay for free thiol.

Example 2: Gold surface functionalization

  • Clean Au substrate. Prepare 0.1–1.0 mM HS-PEG-NHS in ethanol or ethanol/water.
  • Immerse substrate 1–12 h, rinse with solvent, then buffer. Immediately couple amine-bearing ligand in pH 7.8 phosphate buffer, 30–60 min, then quench.

Note: Optimize stoichiometry and times per substrate. For research use only.

Biological Roles

HS-PEG-NHS itself is a synthetic linker and does not have intrinsic biological function. However, PEG and its derivatives play important roles in bioconjugation workflows (literature/general):

  • Hydrophilicity and stealth: PEG chains impart water solubility and reduce nonspecific adsorption (protein-resistant surfaces), improving colloidal and biomaterial performance.
  • Spacing and flexibility: The PEG spacer modulates distance between conjugated entities (proteins, ligands, surfaces), reducing steric hindrance and preserving activity.
  • Site-selective assembly: The orthogonal reactivity (NHS to primary amines; thiol to maleimides/metals) enables stepwise construction of complex biohybrid architectures.

Note: Any in vivo biological or clinical roles are outside the scope of this product, which is supplied strictly for research use only.

Buffer Applications

HS-PEG-NHS is routinely used in buffered aqueous systems for NHS–amine coupling and subsequent thiol reactions. Practical guidance (literature/general):

  • NHS–amine coupling buffers: Use amine-free buffers at pH 7.5–8.5. Common choices: 50–100 mM sodium phosphate, PBS lacking primary-amine additives, or 50–100 mM sodium bicarbonate/carbonate. Avoid Tris, glycine, ammonium, and other primary amines.
  • Ionic strength: 100–200 mM NaCl improves protein stability without impeding reaction. Keep buffer fresh and CO2-protected if using bicarbonate.
  • Reaction time: 15–120 minutes at room temperature, depending on substrate accessibility. Work cold (4–10°C) to slow hydrolysis if needed.
  • Thiol-stage buffers: For thiol–maleimide coupling, use pH 6.5–7.0 (e.g., 50 mM phosphate, 150 mM NaCl). Include EDTA (0.5–5 mM) to chelate metals that catalyze thiol oxidation. Prefer TCEP (0.2–1 mM) over DTT during NHS presence to avoid thioester formation.
  • Quenching/Blocking: After NHS coupling, quench with 10–50 mM ethanolamine or Tris for 10–30 min.

Recipe hints (examples)

  • 100 mM Na2HPO4/NaH2PO4, 150 mM NaCl, pH 7.8 for NHS–amine step.
  • 50 mM phosphate, 150 mM NaCl, 1 mM EDTA, pH 6.8 for thiol–maleimide step.
Green Alternatives

Greener practice with HS-PEG-NHS focuses on solvent and buffer choice, minimizing reactive-ester waste, and aqueous-first strategies.

  • Prefer aqueous buffers when feasible: Run NHS–amine coupling in phosphate or bicarbonate buffers (pH 7.5–8.5) with minimal organic co-solvent. Work quickly to limit hydrolysis waste.
  • Reduce hazardous solvents: If needed, favor ethyl acetate or ethanol for workups over chlorinated solvents. For stock solutions, DMSO is preferable to DMF/NMP from an EHS perspective.
  • Concentrated stocks and on-demand use: Prepare small, high-concentration anhydrous stocks and aliquot to minimize repeated thawing and discard.
  • Waste minimization: Quench excess NHS ester with aqueous ethanolamine at end of reactions to reduce reactivity before disposal.

Comparison (general, literature)

  • DMSO vs DMF/NMP: DMSO is less toxic and has better environmental profile; all three dissolve PEGs well.
  • Aqueous buffer vs aprotic solvent: Aqueous media are greener but accelerate NHS hydrolysis—balance by rapid mixing, higher substrate concentration, and cooler temperatures.
  • 2-MeTHF/CPME: These “green ethers” are less commonly needed due to PEG hydrophilicity; consider only for hydrophobic co-reactants.
Pharmaceutical Uses

This product is offered for research use only. No clinical or therapeutic claims are made.

Formulation/manufacturing context (literature/general)

  • Conjugation intermediate: HS-PEG-NHS can serve as a process intermediate to introduce thiol functionality onto amine-bearing biomolecules or polymers prior to further coupling (e.g., to maleimide-activated cargos) during R&D process development.
  • Excipient-like roles: PEG chains enhance aqueous solubility and reduce aggregation; as linkers they can improve handling of conjugates during purification (e.g., aiding size-exclusion or precipitation steps).
  • Device/surface preparation: Used to prepare amine-reactive, thiol-presenting coatings on diagnostics components or sensor surfaces in development labs.

Regulatory notes

  • Pharmacopeial monographs do not generally exist for specific heterobifunctional PEG linkers; material control relies on Mn distribution, identity (NMR/IR/MS), and residuals per internal specifications.
Physical Properties

Item-specific physicochemical specifications (bp, mp, density, refractive index, exact solubilities) are not provided for this catalog entry.

  • Boiling point / melting point: Not specified for this item; refer to CoA/Spec Sheet. Note: PEG materials are non-volatile; HS-PEG-NHS forms are typically amorphous solids or viscous oils depending on Mn (literature).
  • Solubility (general, literature): Highly soluble in polar aprotic solvents (DMSO, DMF, NMP) and miscible with water for many PEG lengths. NHS esters hydrolyze in water; use minimal aqueous exposure until ready to couple.
  • pKa (functional groups, literature trends): NHS ester is an activated carboxyl derivative (no pKa; undergoes acyl transfer). Thiol pKa typically ~8–9 for alkanethiols; effective thiolate formation increases above pH ~7.5 (literature, general).
  • LogP: PEG backbones impart high hydrophilicity; overall polarity depends on chain length and capping groups (literature, general).
  • Hydrolytic/oxidative stability (literature): NHS ester hydrolyzes in water (faster at higher pH). Thiol can oxidize to disulfide on air exposure; protect from oxygen and metals.

Practical notes

  • Handle under dry, inert conditions for maximal shelf-life. Prepare fresh solutions in anhydrous DMSO/DMF and use promptly to minimize NHS hydrolysis and thiol oxidation.
Quality and Grades

Item-specific grade/purity and appearance are not provided for this entry.

  • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.

How to interpret quality for HS-PEG-NHS (general guidance)

  • PEG Mn and dispersity (Đ): PEG linkers are provided with a nominal number-average molecular weight; actual material has a distribution. Verify Mn (e.g., by MALDI, GPC) appropriate for your application (protein spacing, hydrodynamic size).
  • End-group integrity: For heterobifunctionals, confirm substitution >95% at both termini (NHS content, free thiol content). Test thiol content via Ellman’s reagent; NHS via hydroxylamine titration or NMR.
  • Residuals: Check for residual solvents (e.g., DCM, DMF), NHS, or succinimide. Low residuals are important for bioconjugation.
  • UV profile: NHS-bearing PEGs have low UV absorbance above 260 nm, facilitating protein quantitation; nonetheless, verify background for spectroscopy workflows.

What stabilizers are used?

  • Stabilizers: Not specified for this item; refer to CoA/Spec Sheet. Generally, no stabilizer is added; stability is ensured by dry, cold storage. Avoid aqueous storage to limit NHS hydrolysis.
Reaction and Applications

HS-PEG-NHS enables orthogonal bioconjugation and materials functionalization through two distinct handles.

Key applications (literature/general)

  • Protein/peptide conjugation: NHS ester couples to lysine ε-NH2 groups to form amide bonds, introducing a terminal thiol for subsequent site-directed coupling (maleimide, iodoacetyl) or surface attachment.
  • Two-step crosslinking: First, NHS–amine coupling to attach PEG to an amine-bearing substrate; second, using the thiol for Michael addition to maleimide-activated molecules, disulfide exchange, or Au–S binding.
  • Surface chemistry: Immobilization of biomolecules on gold via thiol chemisorption while the NHS end reacts with amines on ligands or proteins; also useful for silica/oxide surfaces after aminosilane priming.
  • Nanoparticles: Stabilization and functionalization of Au, Ag, or quantum dots through thiol anchoring, improving colloidal stability and providing amine-reactive termini.
  • Polymer/probe synthesis: Introduction of thiol handles into amine-containing polymers, dyes, or drugs for subsequent click-like thiol couplings.

Practical tips

  • Sequence matters: Perform NHS–amine coupling first under mildly basic conditions, then engage the thiol in the second step at neutral to slightly acidic pH to minimize disulfide formation.
  • Dry conditions: Prepare fresh anhydrous stock; add to buffered amine solutions immediately before use to minimize hydrolysis.
  • Stoichiometry: Use 2–10 equiv HS-PEG-NHS vs. limiting amine for efficient labeling in complex mixtures; adjust based on substrate accessibility.
  • Quenching: After coupling, quench residual NHS with ethanolamine, glycine, or Tris—only after primary coupling is complete.
Reaction Conditions

General conditions (literature guidance; optimize per substrate)

NHS–amine coupling

  • Solvent/buffer: 50–100 mM phosphate or bicarbonate buffer, pH 7.5–8.5. If solubility is limiting, premix a concentrated anhydrous DMSO or DMF stock and add to buffer (final organic 5–20%).
  • Temperature/time: Room temperature, 15–120 min. Lower temperatures slow NHS hydrolysis for sensitive proteins.
  • Stoichiometry: 2–10 equiv HS-PEG-NHS per accessible amine in complex mixtures; 1.1–2.0 equiv for purified small-molecule amines.
  • Additives: 0.5–2 mM EDTA to chelate metals; avoid primary amine buffers.

Thiol-stage reactions

  • Maleimide coupling: pH 6.5–7.0 in phosphate buffer; 0.5–2 h at RT. Exclude oxygen; include 0.2–1 mM TCEP to maintain thiol in the reduced state (do not use DTT if residual NHS is present).
  • Disulfide formation: pH ~7–8 with mild oxidant (e.g., air or trace H2O2) for 1–12 h, monitoring to avoid overoxidation.
  • Gold surface immobilization: Adsorb from ethanol or water/ethanol mixtures (0.01–1 mM) onto clean Au; 0.5–12 h to form self-assembled monolayers; rinse thoroughly.

Workup/purification

  • Small molecules/polymers: Precipitation into cold ether/acetone, dialysis, SEC, or ultrafiltration depending on size.
  • Proteins: Remove excess linker by desalting columns (e.g., PD-10), ultrafiltration, or SEC; quench unreacted NHS before storage.
Safety and Handling

GHS/SDS

  • Signal word: Not specified for this item; refer to SDS.
  • Hazard statements / GHS classification / pictograms: Not specified for this item; refer to SDS.

General laboratory precautions (guidance)

  • PPE: Use gloves (nitrile), lab coat, and safety glasses. Handle powders/solids in a fume hood to avoid dust and to limit moisture exposure.
  • Incompatibilities: Avoid bases and aqueous buffers until immediately before use—NHS ester hydrolyzes. Avoid oxidants and air exposure that promote thiol oxidation to disulfide; minimize transition-metal contamination.
  • Atmosphere: Work under dry nitrogen/argon when weighing and dissolving. Degas solvents if possible.
  • Moisture control: Hygroscopic PEG backbones can take up water; keep containers tightly closed with desiccant.
  • First aid (overview; defer to SDS): On skin/eye contact, rinse with water for 15 minutes and remove contaminated clothing. If inhaled, move to fresh air. If ingested, rinse mouth—seek medical attention.
  • Waste: Collect solutions containing NHS ester or residual coupling byproducts in appropriate organic waste. Neutralize reactive esters by hydrolysis before disposal where required.

Special risks

  • Peroxide formation: Not typical for PEG; however, anhydrous ethers/solvents used with the product may form peroxides—verify solvent quality.
  • Odor: Alkanethiols can have noticeable odor; HS-PEG-NHS usually exhibits minimal odor but good ventilation is recommended.
Solvent Selection

Choose solvent based on the coupling step you intend to run and the substrate’s solubility.

  • Polar aprotic (anhydrous) for stock solutions: DMSO, DMF, or NMP provide excellent solubility for HS-PEG-NHS and limit premature hydrolysis. These are preferred for preparing concentrated stocks (e.g., 10–100 mM), which can then be diluted into the reaction buffer immediately before use.
  • Aqueous buffers for NHS–amine coupling: Brief exposure in phosphate or bicarbonate buffers (pH 7.5–8.5) is ideal. Avoid primary amine-containing buffers (Tris, glycine) that compete and quench the NHS ester.
  • Thiol-side reactions: Maintain the thiol end reduced in organic solution under inert atmosphere; for aqueous work, include a non-thiol reducing agent (e.g., TCEP) rather than DTT/βME if the NHS end is present to avoid side reactions.
  • Co-solvent systems: For hydrophobic substrates, combine anhydrous DMF/DMSO with small percentages of aqueous buffer to maintain NHS reactivity while dissolving the partner.

Quick comparison (general)

  • DMSO: Highest solvency; miscible with water; low volatility; can carry into biological buffers.
  • DMF: Excellent solvency; miscible with water; may require removal after coupling.
  • Aqueous buffer: Greenest choice but accelerates NHS hydrolysis; add substrate last and work quickly.
Storage and Reconstitution

Storage conditions

  • Store at -20°C (per product data). Keep tightly sealed under dry, inert atmosphere with desiccant. Protect from light and moisture.
  • Shipped cold: Ice chest + ice pads (per product data). Minimize transit time and avoid warming during receipt.

Stability considerations (general)

  • NHS ester is moisture-sensitive and hydrolyzes; thiol can oxidize to disulfide. Minimize repeated freeze–thaw and air exposure.

Reconstitution

  • Solvents: Use anhydrous DMSO or DMF to prepare concentrated stocks (e.g., 10–100 mM). Filter (0.2 µm PTFE) if particulate is present.
  • Aliquoting: Dispense into single-use aliquots under nitrogen/argon. Store aliquots at -20°C in moisture-tight vials.
  • Aqueous use: Dilute the anhydrous stock into the reaction buffer immediately before use. Avoid prolonged pre-dilution in water.
  • Reducing conditions: If preserving the thiol in solution, include TCEP (non-thiol reducing agent) after NHS reactions are complete; avoid DTT/βME when NHS is present.

Specifications not provided

  • Grade/purity, appearance, and exact shelf-life: Not specified for this item; refer to CoA/Spec Sheet.

Research Use

  • For research use only (per product data).
Structure and Identity

Thiol PEG NHS (HS-PEG-NHS) is a heterobifunctional polyethylene glycol linker bearing a terminal thiol (–SH) at one end and an N-hydroxysuccinimide (NHS) ester at the other. This architecture enables orthogonal coupling to thiol-reactive substrates (e.g., Au surfaces, maleimides) and to primary amines (via the NHS ester).

Item-specific identifiers

  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet. Note: PEG products are often provided as nominal Mn with a distribution (Đ).
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • CAS / CID: Not specified for this item; refer to CoA/Spec Sheet.

Structural features (general description)

  • Backbone: Flexible, hydrophilic poly(ethylene glycol) chain [–CH2–CH2–O–]n.
  • End groups: One terminus capped as an NHS ester (typically of a PEG carboxylate), the opposite terminus is a free thiol.
  • Functional group reactivity: NHS ester acylates primary amines to form stable amide bonds; thiol can undergo Au–S chemisorption, thiol–maleimide Michael addition, or disulfide formation.
  • Physical form: Depends on PEG chain length; low-MW variants tend to be viscous oils or waxy solids; higher-MW variants are waxy/solid (literature, polymer-general).
Synthetic Utility

Functional group portfolio

  • NHS ester: Activated carboxyl derivative; undergoes nucleophilic acyl substitution with primary amines to give stable amide linkages. Orthogonal to most hydroxyls and many secondary amines under controlled conditions.
  • Thiol: Readily participates in Michael additions to maleimides/activated alkenes, Au–S chemisorption, disulfide formation/exchange, and thiol–ene photochemistry.

Utility in synthesis (literature/general)

  • Spacer engineering: Incorporates a tunable, hydrophilic spacer between two entities to adjust solubility, reduce aggregation, and modulate spatial reach in bifunctional constructs.
  • Sequential conjugation: Enables order-controlled synthesis—first immobilize via NHS to an amine-bearing core, then diversify through thiol chemistry.
  • Orthogonal protection: If needed, transiently protect thiol (e.g., as S-acetyl) during NHS reactions; or convert NHS to amide, then deprotect and proceed with thiol-specific coupling.
  • Materials synthesis: Grafting-to strategies on aminosilanized oxides or amine-terminated polymers followed by thiol-mediated crosslinking or metal binding.

Analytical confirmation

  • Monitor NHS consumption by appearance of N-hydroxysuccinimide byproduct (HPLC, LC–MS).
  • Verify thiol presence by Ellman’s assay or 1H NMR (–SH signal) and assess disulfide content (SEC, MALDI).
Target Specificity

Not applicable. HS-PEG-NHS is a chemical linker, not a biological targeting reagent. It does not possess inherent selectivity for a biological antigen or epitope. Its reactivity is chemoselective for primary amines (via NHS ester) and for thiol-reactive partners (e.g., maleimides, gold surfaces) based on functional group chemistry.

Domande frequenti

How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.