TMB Blotting - Ready-to-use (RTU)

Cat. No.: T494233

GRADE & PURITY Ready-to-use (RTU)

Storage

Store at 2-8°C,Protected from light

Shipped In

Wet ice

Panoramica

TMB (3, 3', 5, 5'-tetramethylbenzidine) is a chromogenic substrate for Horseradish Peroxidase (HRP). TMB produces a deep blue color during the enzymatic degradation of hydrogen peroxide by HRP.

TMB Blotting liquid ready-to-use substrate is a highly active and stable blotting substrate utilized for measuring HRP probe activity. A stable blue precipitate is formed at the reaction site.

The substrate does not contain NMP (1-methyl-2pyrrolidone) making it REACH Restricted Substances List Annex XVII compliant, while ensuring maximal safety during use, and minimal negative environmental impact.

Product Characteristics 

TMB (3, 3', 5, 5'-tetramethylbenzidine) is a chromogenic substrate for Horseradish Peroxidase (HRP). TMB produces a deep blue color during the enzymatic degradation of hydrogen peroxide by HRP.

TMB Blotting liquid ready-to-use substrate is a highly active and stable blotting substrate utilized for measuring HRP probe activity. A stable blue precipitate is formed at the reaction site.

The substrate does not contain NMP (1-methyl-2- pyrrolidone) making it REACH Restricted Substances List Annex XVII compliant, while ensuring maximal safety during use, and minimal waste problems after use.

Composition & Properties 

Ready-to-use substrate: Includes substrate buffer and hydrogen peroxide. No other reagents should be added.

Working Procedure 

The following procedure is applicable to nitrocellulose membranes. The procedure must be optimized for other membranes.

1.The desired amount of substrate is poured into a sealed container and allowed to reach room temperature in the dark before use. 

2.In order to prevent the blotted membrane from fading, we recommend the use of 0.1M K2HPO4, pH 7.2 in coating.

3.After the last incubation with HRP-labelled Streptavidin or HRP-labelled secondary antibody, it is recommended to wash the membrane in a 0.1 M Tris buffer pH 7.4. 

4.Shake off the excess buffer and incubate the membrane in the TMB Blotting solution for 10 minutes. 

5.Wash the membrane in distilled water and allow it to dry. 

6.The site of positive reaction will appear light blue with no or very little background staining.

Tips & Tricks 

• The membrane can be blocked, prior to applying the substrate, with Kementec’s Synthetic Blocking Buffer for Blotting (cat. no. S494457). 

• For long-term preservation of the results, the membranes must be stored in the dark.

Handling & Storage 

• Store solution at 2-8 °C in the dark. 

• Avoid exposure to light, heat and contamination with metal ions or peroxidase 

• Re-dispense only into bottles made of High-Density Polyethylene (HDPE), amber color. Dispensing guidelines are available upon request.

Specifications

Specifiche e purezza

Ready-to-use (RTU)

Condizioni di conservazione di stoccaggio

Store at 2-8°C,Protected from light

Spedito in

Wet ice

Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.

Domande frequenti

How should this product be stored?

Store at 2–8 °C, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.

How is this product shipped?

This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.

What documentation is provided?

Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.