QUALITÀ & PUREZZABioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Product application: For the cultivation of various fastidious microorganisms, especially Brucella.
Preparation method: Weigh 39.0 g of this product, dissolve in 1 L of distilled or deionized water, heat to boiling until completely dissolved. Dispense into suitable containers and autoclave at 116°C for 30 minutes. After sterilization, shake well to prevent agar from settling and solidifying at the bottom of the container, then set aside for use. If preparing blood agar plates, after sterilization cool to 50–55°C, add 5% pre-warmed defibrinated sheep blood under aseptic conditions, mix gently, and pour into plates.
Formula: /L
Tryptose 20.0 g
Sodium chloride 5.0 g
Glucose 1.0 g
Agar 13.0 g
pH 6.9 ± 0.1 (25°C)
Specifiche
Specifiche e purezza
BioReagent
Condizioni di conservazione di stoccaggio
Room temperature
Spedito in
Normal
Grado
BioReagent
Product Line
Prodotti biologici
Dati avanzati
Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
No antibody/assay protocols are specified for this item. General microbiological protocols (literature/general) for plate preparation and use are provided for context only:
Plate preparation
Weigh the manufacturer-recommended mass into purified water (Not specified for this item; refer to CoA/Spec Sheet). Heat to dissolve; adjust pH if directed. Autoclave (121 °C, ~15 min). Cool to 45–50 °C, optionally add sterile supplements, and pour into sterile Petri dishes. Allow plates to set and dry surface moisture under aseptic conditions.
Inoculation and incubation
Streak for isolation or spread measured inoculum for enumeration. Incubate at organism-appropriate temperature and atmosphere until colonies are visible.
QC checks
Include sterility plates (uninoculated) and growth-promotion tests with representative organisms relevant to your application.
For validated protocols and organism panels, follow your lab’s SOPs and any applicable standards. This item is for research use only.
Biological Roles
While not a single biomolecule, Tryptose Agar provides a defined function in microbiology by supplying nutrients and a solid matrix for microbial growth.
Nutritional role (literature/general)
Tryptose (enzymatic digest of casein) delivers peptides, amino acids, and growth factors that many heterotrophic bacteria require for biosynthesis and energy metabolism.
Trace components (minerals, vitamins) typically present in peptones support enzyme cofactor needs and membrane function.
Physical role (literature/general)
Agar forms a semi-solid, inert matrix that allows oxygen diffusion gradients and discrete colony formation, enabling isolation of pure cultures and morphological assessment.
Experimental implications
Media richness influences growth rate, expression of certain phenotypes (e.g., pigment production), and stress responses. Standardize medium selection for reproducibility in comparative studies.
For fastidious organisms, additional supplements (e.g., sterile blood, NAD, hemin) are often required; Tryptose Agar can function as a base for such enrichments.
Limitations
Undefined composition introduces variability in metabolite availability; for metabolic profiling or quantitative physiology, consider transitioning to defined/minimal media after isolation.
This product is intended for research use only. It supports laboratory cultivation and study of microorganisms under controlled conditions; it is not formulated for clinical diagnostics or therapeutic applications.
Buffer Applications
Tryptose Agar is not a buffer system. It is a nutrient medium that typically exhibits near-neutral pH after preparation and sterilization.
Relevance (literature/general)
Intrinsic buffering capacity is limited and derives from amino acid/peptide side chains and any salt components present in the formulation. It is generally sufficient for routine cultivation but not for stringent pH control experiments.
Practical guidance
If precise pH control is critical (e.g., acid stress assays), use media specifically formulated with defined buffers or overlay with buffered systems. Adjustments to pH should follow the product label and be performed prior to sterilization.
For exact target pH and any buffering components of SKU T1528446, refer to the CoA/Spec Sheet.
Green Alternatives
Tryptose Agar itself is a laboratory medium rather than a solvent or reagent, but sustainability considerations still apply.
Resource considerations (literature/general)
Agar is sourced from marine algae (renewable); choose suppliers supporting sustainable seaweed harvesting. Alternative gelling agents (e.g., gellan gum) can reduce reliance on specific agar species but may alter performance.
Tryptose is an animal-derived protein hydrolysate (casein). If animal-free inputs are required for ethical or regulatory reasons, consider plant peptone–based media or certified animal-origin–free formulations with comparable growth performance.
Energy and waste
Autoclaving consumes energy and water; maximize load efficiency (batch sterilize larger volumes/plate runs), use validated cycle times, and avoid unnecessary re-sterilization.
Reduce single-use plastics by employing reusable glassware where permitted by SOPs, and segregate biohazard waste to minimize incineration volume.
Chemical footprint
Avoid unnecessary chemical supplements and use ready-to-use sterile media formats when they demonstrably reduce total resource consumption (balanced against cold-chain/logistics impacts).
Comparative notes (literature/general)
Tryptose Agar vs Tryptic Soy Agar (TSA): TSA is broadly used for compendial environmental monitoring/QC; selection should follow method performance, not just sustainability. Plant-based peptones are available for some TSA variants when animal-free sourcing is a priority.
Select media and workflows that meet performance needs while considering sourcing ethics, energy use, and waste minimization.
Pharmaceutical Uses
No therapeutic or clinical claims are made. In pharmaceutical and biotech laboratories, Tryptose Agar can have roles within non-clinical, quality-related workflows (literature/general):
Environmental monitoring and general microbiology
Cultivation and maintenance of microbial strains used for method development, training, or in-house controls.
Base for enriched plates (e.g., with blood) in non-clinical research to recover fastidious organisms from laboratory samples.
Manufacturing support (research/QC context)
Suitability testing of disinfectants (carrier tests) and surface recovery studies where a rich, non-selective base medium is appropriate, aligned with internal SOPs.
Compendial context
Selection of media for pharmacopeial tests is method-specific; many compendial methods specify Tryptic Soy Agar or other defined media. Use Tryptose Agar only where it is justified by method validation or research objectives.
Always align media selection with your quality system and regulatory expectations. This item is for research use only and is not intended for clinical diagnostics or as a component of drug products.
Physical Properties
Because Tryptose Agar is a complex medium, classical single-compound properties (exact MP/BP, logP) are not applicable. Where helpful, general/literature values are provided strictly as context and are not specifications for this item.
Item-specific physical data
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Density, melting point/boiling point, refractive index: Not applicable/Not specified for this item.
Solubility: Reconstituted with purified water; exact mass-per-liter and dissolution details are Not specified for this item; refer to CoA/Spec Sheet.
General/literature guidance (not item-specific)
Form (dehydrated medium): free-flowing powder blends that hydrate in water with heating; agar dissolves near the boiling point of water and gels upon cooling (~32–40 °C) forming a firm matrix that remelts ~85–95 °C.
Typical working pH (literature): near neutral (commonly ~7.2–7.4 at 25 °C after sterilization), depending on formulation.
Gel characteristics: Agar concentration commonly around 1.3–1.6% w/v in many plate media; gel strength and clarity depend on agar quality and total solids.
Stability: Dry medium is generally stable at ambient conditions when protected from moisture and light; hydrated medium is prone to microbial contamination unless sterilized and handled aseptically.
For exact preparation mass, target pH, and performance parameters, follow the lot-specific CoA/Spec Sheet and label instructions for SKU T1528446.
Quality and Grades
Item-specific grade
Grade/Purity: BioReagent (per Product Data). This designation indicates suitability for common laboratory biological applications (e.g., microbiology, cell-related workflows) where consistent nutrient performance and low inhibitory contaminants are important. It does not imply clinical/diagnostic suitability.
What BioReagent grade means (general)
Controlled raw materials and manufacturing to support reproducible microbial growth characteristics.
Attention to parameters relevant to biological performance (e.g., growth promotion tests, microbial limits) rather than analytical purity in the classical chemical sense.
Stabilizers and additives
Stabilizer(s): Not specified for this item; refer to CoA/Spec Sheet.
Documentation and verification
For defined acceptance criteria (e.g., growth promotion with challenge strains, pH after sterilization, recommended preparation mass), consult the lot-specific CoA/Spec Sheet.
Shipping and storage
Shipped: Normal (per Product Data).
Storage: Room temperature (per Product Data). Protect from moisture, excessive heat, and light to maintain performance.
Note: As an undefined (complex) medium, batch-to-batch performance is qualified biologically rather than by fixed chemical assays. Use the exact label directions for preparation to ensure expected performance in your lab setting.
Reaction and Applications
This section focuses on laboratory applications rather than chemical reactions, as Tryptose Agar is a microbiological medium.
Core applications (literature/general)
General cultivation and maintenance of a wide range of bacteria on a solid surface.
Base medium for enrichment with sterile defibrinated blood or supplements to support fastidious organisms.
Enumeration (plate count) and colony isolation from mixed cultures; phenotypic observation (colony morphology, pigmentation, hemolysis when supplemented with blood).
Practical tips
Preparation: Weigh the manufacturer-recommended mass into purified water (Not specified for this item; refer to CoA/Spec Sheet). Heat with stirring to dissolve; do not scorch. Adjust pH if directed by the label, then sterilize by autoclaving (121 °C, ~15 min; literature/general) unless using pre-sterilized formats.
Pour plates at 45–50 °C to minimize condensation and avoid thermal stress to heat-labile supplements. Allow plates to dry in a laminar flow hood until the surface is free of excess moisture.
Aseptic technique: Flame-sterilize spreaders/loops or use sterile disposables; minimize plate exposure to ambient air.
Quality control: Perform growth promotion with representative organisms appropriate to your workflow. Include sterility controls for each batch of poured plates.
Use scope and limitations
As an undefined medium, component variability can influence selectivity and growth rates. For selective or differential diagnostics, use targeted media (e.g., MacConkey, Mannitol Salt) per method requirements.
For regulated testing, align preparation and QC with relevant standards (e.g., pharmacopeial or ISO microbiology methods) and your lab’s SOPs.
Reaction Conditions
Classical reaction-condition parameters (temperature, catalysts, yields) do not apply. Instead, practical preparation and incubation conditions for microbial culture are relevant.
Medium preparation (literature/general)
Mass per liter: Not specified for this item; refer to CoA/Spec Sheet.
Dissolution: Suspend in purified water; heat with stirring until the agar is fully melted (near boiling). Avoid localized overheating.
Sterilization: Autoclave at 121 °C for ~15 minutes (typical). Mix well after autoclaving to ensure homogeneity.
Cooling and pouring: Cool to 45–50 °C before adding heat-labile supplements (e.g., sterile blood, antibiotics) and before pouring plates.
Incubation (literature/general)
Typical incubation temperatures: 20–37 °C depending on organism; aerobiosis vs. anaerobiosis as required by the microorganism under study.
Duration: 18–48 hours for many mesophilic bacteria; slower growers may require several days.
Quality controls
Include sterility controls and growth-promotion checks with representative strains aligned to your workflow.
Always follow the label directions for SKU T1528446 and your lab’s SOPs to define exact preparation and incubation parameters.
Safety and Handling
GHS classification and labeling (item-specific)
Signal Word: Not specified for this item; refer to SDS.
Hazard Statements (H-Statements): Not specified for this item; refer to SDS.
Pictograms: Not specified for this item; refer to SDS.
General safety considerations (literature/general)
Dehydrated media powders may cause irritation to eyes, skin, and respiratory tract; avoid dust generation and inhalation. Use in a well-ventilated area.
After inoculation and incubation, plates/broths should be handled as biohazardous material. Follow institutional biosafety practices for decontamination and disposal (e.g., autoclave at 121 °C for ≥15 min before discarding).
Incompatibilities: Avoid moisture uptake during storage (caking/degradation). Keep separate from strong oxidizers and strong acids/bases that may degrade organic nutrients.
PPE (typical lab practice)
Lab coat, safety glasses/goggles, and suitable gloves. Use a dust mask or respirator if airborne dusts cannot be avoided.
First-aid overview (general)
Inhalation: Move to fresh air; seek medical attention if symptoms persist.
Skin contact: Wash with soap and water.
Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; seek medical attention if irritation persists.
Ingestion: Rinse mouth; seek medical advice if unwell.
Always consult the product SDS for authoritative, item-specific safety data and local regulatory requirements.
Solvent Selection
This product is not a solvent. However, proper choice and quality of water and handling during reconstitution are critical for performance.
Reconstitution medium (item)
Use purified, microbiological-grade water. Specific mass-per-liter and target pH are Not specified for this item; refer to CoA/Spec Sheet/label for SKU T1528446.
Water quality considerations (literature/general)
Resistivity ≥18 MΩ·cm and low TOC minimize inhibitory contaminants; avoid residual chlorine/chloramine that can react with organic components.
Degassing is not typically required, but heating with stirring ensures agar dissolution. Avoid prolonged overheating that can cause Maillard-type browning.
Miscibility and matrix formation (literature/general)
Agar dissolves in hot water and forms a thermo-reversible gel upon cooling (approx. gelation 32–40 °C). The final matrix is water-based and compatible with most aqueous supplements (e.g., sterile blood, antibiotics) when added at appropriate temperatures.
When to choose Tryptose Agar vs alternatives (literature/general)
Choose Tryptose Agar for general cultivation and as a base for enriched media (e.g., blood agar). Consider Tryptic Soy Agar (TSA) for broader general-purpose QC, or Nutrient Agar for non-fastidious organisms, depending on your test organisms and compendial method.
Always follow the product’s specific preparation instructions to achieve expected gel strength and pH.
Storage and Reconstitution
Storage (item-specific)
Storage Conditions: Room temperature (per Product Data). Keep container tightly closed, dry, and protected from light. Avoid humidity to prevent caking and performance loss.
Shipped In: Normal (per Product Data).
Shelf life and stability
Not specified for this item; refer to CoA/Spec Sheet for expiry or retest date.
Reconstitution and sterilization (literature/general)
Reconstitution mass: Not specified for this item; refer to CoA/Spec Sheet/label for grams per liter and target pH.
Dissolve dehydrated medium in purified water with heating and stirring until agar is fully melted. Adjust pH if directed by the label.
Sterilize by autoclaving at 121 °C for ~15 minutes. After sterilization, swirl to mix. Cool to 45–50 °C before adding heat-labile supplements or pouring plates.
Prepared media handling
Store poured plates inverted to minimize condensation; short-term storage at 2–8 °C in sealed bags/containers can extend usability. Monitor for dehydration and contamination.
Avoid repeated melt–solidify cycles; prolonged overheating can cause nutrient degradation and color changes.
Always follow the lot-specific CoA/Spec Sheet and label directions for SKU T1528446 for exact preparation parameters and storage guidance. For research use only.
Structure and Identity
Tryptose Agar is a complex, undefined microbiological medium rather than a single, structurally defined compound.
Item-specific identifiers
CAS: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES / InChI / InChIKey: Not applicable to complex mixtures; not specified for this item.
Composition overview (literature/general)
Contains an enzymatic digest of casein known as tryptose (a rich source of peptides, amino acids, vitamins), with agar as the gelling agent.
Many commercial formulations may include salts (e.g., NaCl) and buffering components; exact formulation varies by manufacturer.
Structural features (descriptive, literature/general)
Heterogeneous mixture of short peptides, free amino acids, and small nutrients derived from protein hydrolysate (tryptose); agar is a linear polysaccharide composed primarily of agarose (repeating galactose-based units) that provides a semi-solid matrix upon cooling.
No discrete 2D/3D molecular structure can represent the product; properties reflect the collective behavior of its constituents.
Identity and intended use
Category: Microbiological culture medium (solid, nutritive).
Typical role (literature/general): General-purpose medium for cultivation and maintenance of a broad range of bacteria; frequently used as a base for blood or other supplements to support fastidious organisms.
Always consult the product label/CoA for the exact formulation and specifications of this SKU (T1528446).
Synthetic Utility
Tryptose Agar is not a chemical reagent and has no direct role in synthetic organic, inorganic, or polymer chemistry.
Not typically applicable
It is an undefined biological medium used for microbial cultivation, not a substrate, catalyst, or solvent for chemical reactions.
Indirect utility (literature/general)
It can support microbial growth for biotransformation screening or isolation of microbial strains that later produce enzymes or metabolites of interest, but such workflows generally transition to liquid media or defined conditions for scale-up and kinetic studies.
For reagents and solvents relevant to synthetic chemistry, consult dedicated product categories (e.g., anhydrous solvents, catalysts, building blocks).
Target Specificity
Not applicable. This product is a microbiological culture medium and does not possess target binding specificity (e.g., no antigen/epitope, clone, or isotype information). There are no species-reactivity claims. For selective or differential behavior toward organisms, use media that incorporate specific inhibitors or indicators as defined by the intended method.
Hai bisogno di aiuto per scegliere la qualità?
La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.