2-Acetylcyclopentanone (2-ACP) is a β-dicarbonyl compound which undergoes keto-enol isomerization Usually used to evaluate the protective abilities of 2-ACP in a mouse model of acetaminophen (APAP) hepatotoxicity.
This compound belongs to the class of organic compounds known as beta-diketones. These are organic compounds containing two keto groups separated by a single carbon atom.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Revisões
Avaliações dos Clientes
Application Protocols
No biological assay/application protocols (e.g., WB, IHC, IF, FC) are applicable to this small-molecule reagent. For synthetic applications, see the Reaction Conditions and Synthetic Utility sections for detailed, literature-based procedural guidance tailored to 1,3-dicarbonyl chemistry.
Biological Roles
This product is intended for research and synthetic chemistry. It is not a biological reagent per se.
General chemistry context (non-clinical, literature):
1,3-Dicarbonyl compounds can serve as models for keto–enol tautomerism and hydrogen bonding in biochemical educational studies.
Metal β-diketonate complexes derived from such ligands are used in materials and catalysis research; any biological implications are indirect (e.g., as probes in coordination chemistry), not as active biomolecules.
No specific endogenous biological role is associated with 2-acetylcyclopentanone. For all bio-related experiments, it should be handled as a synthetic small molecule under standard chemical safety protocols.
Buffer Applications
Not typically applicable. 2-Acetylcyclopentanone is a neutral organic building block and is not used as a buffering agent in aqueous systems.
Practical note:
If aqueous/biological work is attempted (e.g., micellar catalysis), select an appropriate external buffer (e.g., phosphate, Tris) independent of this reagent, and verify solubility/emulsion behavior.
Green Alternatives
Context: 2-Acetylcyclopentanone is a functional building block, not a commodity solvent. Greener practice focuses on solvent choice, base selection, and process design rather than replacing the molecule itself.
Greener choices around its use (literature/practice):
Solvent selection:
Prefer 2-methyltetrahydrofuran (2-MeTHF) over THF for enolate chemistry when feasible (bio-derived, higher boiling point, easier phase separation).
Use ethyl acetate or isopropyl acetate instead of chlorinated solvents for extractions and chromatography when compatible with polarity.
Base and reagents:
Favor weaker, catalytic bases (e.g., DBU, organic superbases in catalytic amounts) with transamination of electrophile reactivity to reduce stoichiometric waste when reaction scope allows.
Employ solid-supported bases to ease workup and minimize aqueous waste.
Energy and protection:
Conduct reactions at ambient temperature using phase-transfer catalysis or micellar conditions (e.g., TPGS-750-M) where applicable.
Minimize protecting-group steps by leveraging the 1,3-dicarbonyl’s innate directing ability.
Illustrative comparison (general; not item-specific):
THF vs 2-MeTHF: similar enolate performance; 2-MeTHF is more hydrophobic, facilitating separations; both form peroxides, but 2-MeTHF often scores better in several green solvent guides.
DCM vs EtOAc: DCM offers rapid kinetics and heat removal; EtOAc reduces halogenated waste and is generally safer environmentally.
Process notes:
Maintain the argon blanket only where mechanistically justified; for non-air-sensitive steps, minimize inert gas consumption via balloon or closed-loop systems.
Pharmaceutical Uses
No therapeutic or clinical claims are made. This compound is supplied strictly for research use.
General formulation/manufacturing context (literature/practice):
1,3-Dicarbonyl compounds can act as intermediates in the synthesis of active pharmaceutical ingredients (APIs) and advanced intermediates through C–C bond-forming reactions (Michael, Knoevenagel, alkylation) and heterocycle construction.
As a ligand precursor, β-diketones sometimes aid in catalyst preparation for process chemistry; the subject compound’s cyclic backbone can modulate sterics and electronics compared to acetylacetone.
Pharmacopeial status, excipient roles, and specific GMP expectations: Not specified for this item; consult regulatory sources if process development for pharmaceuticals is contemplated.
Physical Properties
Item-specific (Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Literature/general values (for reference; not item specifications):
Tautomeric behavior: appreciable enol content in nonpolar solvents (literature for 1,3-diketones).
pKa of the active methine: typically ~8–10 for β-diketones; specific literature reports for closely related structures are ~9 (guidance, not item-specific).
Solubility: expected to be miscible with many organic solvents (Et2O, THF, EtOAc, toluene, MeCN) and of low solubility in water (literature trends for β-diketones).
LogP: moderate (consistent with C7 ketone; literature expectation for β-diketones); exact value not specified here.
Boiling point / melting point / density / refractive index: Not specified for this item; consult primary literature or CoA/SDS for exact values.
Notes for practitioners (general):
Enol content increases in nonpolar/aprotic media and upon hydrogen bonding disruption; this can affect NMR (characteristic enol OH and vinylic signals) and reactivity.
Carbonyl IR bands near ~1710–1730 cm−1 (keto) and broad OH/enol C=C features are typical for β-diketones (literature).
Quality and Grades
Item-specific (Product Data):
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Interpretation and guidance (general; not item-specific):
For building-block diketones used in synthesis, typical offerings include Technical, Reagent (AR), or ≥95–98% purity grades. Higher grades reduce side reactions in base-catalyzed condensations and metal complexations.
If offered as “anhydrous” or “dry,” expect tighter water content control; water promotes self-condensation under base and can alter enolate equilibria. Verify by Karl Fischer on CoA.
Stabilizers: β-Diketones generally do not require radical inhibitors; however, oxygen exclusion (argon blanket) helps limit oxidative byproducts and maintains consistent enol/keto ratio.
Chromatography-grade (if applicable) implies lower UV background and trace-metal limits suitable for spectroscopic or metal-complexation studies; confirm with Spec Sheet.
Practical tips for QC (general):
Identity by 1H/13C NMR will show characteristic enol OH (~15–17 ppm in CDCl3 for many β-diketones) and carbonyl carbons (~190–200 ppm). IR should show strong C=O bands.
Purity assessment often employs GC or HPLC; monitor for di- or oligomerization products if the sample has been exposed to base.
Metal content may be relevant if using as a ligand precursor; if limits matter, request ICP results from the CoA.
Reaction and Applications
As a cyclic β-diketone, 2-acetylcyclopentanone is a versatile nucleophilic and chelating building block. Key application domains (literature/practice):
Enolate-mediated C–C bond formation:
Alkylation of the active methine with alkyl halides under strong base (LDA, NaH) in dry THF.
Michael additions to activated alkenes (enones, acrylates), exploiting soft-stabilized enolates.
Aldol-type condensations (via enolate) with aldehydes/ketones; careful base control minimizes self-condensation.
Heterocycle synthesis:
Hantzsch and related multicomponent assemblies (as 1,3-dicarbonyl component) toward dihydropyridines and polyfunctional heterocycles.
Paal–Knorr–type transformations when paired with appropriate electrophiles (using its 1,3-dicarbonyl motif).
Metal complexation/ligand precursor:
Formation of β-diketonate metal complexes (analogous to acac) with transition metals (e.g., Cu, Ni, Co) for catalysis or materials; the ring backbone can modulate sterics/electronics vs acetylacetone.
Knoevenagel condensations:
With aldehydes under basic or ammonium acetate catalysis to give conjugated enones fused to the cyclopentyl unit.
Protective/synthetic relay chemistry:
Temporary masking of carbonyl reactivity via enolates; selective functionalization at the methine followed by decarbonylation or cleavage (advanced routes).
Practical tips:
Maintain inert atmosphere (argon) to suppress oxidative byproducts and control enol content (consistent with Product Data storage).
Use rigorously dry glassware/solvents; add base at low temperature to manage enolate geometry.
Quench enolates cautiously (NH4Cl or HOAc) to avoid retro-additions; monitor by TLC/GC.
For chelation, pre-form the enol or add mild base (Et3N) prior to metal salt addition to improve complexation rates.
Reaction Conditions
The following are general literature/practice guidelines for 1,3-diketone chemistry using 2-acetylcyclopentanone; adjust to specific substrates.
Enolate generation and alkylation:
Base: LDA (1.05–1.2 eq) in dry THF at −78 °C; add electrophile at −78 to −40 °C, then warm to 0–25 °C.
Alternatives: NaH (60% dispersion, 1.2–1.5 eq) in THF/DMF at 0–25 °C; KOtBu in THF or t-BuOH for rapid deprotonation.
Typical times: 0.5–4 h depending on electrophile; monitor by TLC/GC.
Michael additions:
Base-catalyzed with secondary amines (piperidine) or DBU in toluene/MeCN/EtOH at rt–60 °C; 2–16 h.
Knoevenagel condensations:
Catalyst: NH4OAc, piperidine, or pyridine; solvent: toluene, EtOH, or acetonitrile; reflux or 60–110 °C; Dean–Stark if water removal is needed.
Metal complexation (β-diketonate formation):
Generate enolate with Et3N/NaOAc in EtOH or MeOH; add metal salt (e.g., M(II) acetate). Stir at rt–reflux 1–6 h; isolate complexes by filtration.
O- vs C-alkylation control:
Lower temperatures and strong, non-nucleophilic bases favor C-alkylation; polar protic solvents and milder bases can increase O-alkylation.
Yields (literature ranges, substrate-dependent):
Alkylations/Michael additions: typically 60–90% with optimized conditions.
Knoevenagel products: often 70–95% after water removal and proper base choice.
Operational notes:
Maintain argon atmosphere (as per Product Data storage) during base-mediated steps.
Quench carefully with saturated NH4Cl; acidic workup can back-protonate enolates without overreaction.
Drying agents: anhydrous MgSO4/Na2SO4 for organic extracts; avoid prolonged silica exposure under basic eluents to limit retro-reactions.
Safety and Handling
Authoritative safety data reside in the product SDS; always consult the SDS before use.
Item-specific (Product Data):
GHS Classification / Signal word / H-statements / Pictograms: Not specified for this item; refer to SDS.
Storage conditions: Store at room temperature under an argon atmosphere (argon charged). Shipments are under normal conditions.
General laboratory safety considerations for β-diketones (literature/practice; not item-specific):
Hazards: Many low-MW diketones are combustible liquids and can cause skin/eye irritation. Avoid inhalation of vapors and contact with skin/eyes.
PPE: Safety glasses or goggles, lab coat, and appropriate chemical-resistant gloves (e.g., nitrile). Use in a fume hood to control vapors.
Incompatibilities: Strong bases cause rapid enolate formation; strong oxidizers may react with enolizable substrates. Avoid strong reducing agents that could reduce carbonyls.
Special risks: The enol form can enhance metal chelation; avoid prolonged contact with reactive metals in the presence of base. Not known as a peroxide former, but good practice includes minimizing air/heat exposure to limit oxidation and aldol-type self-condensation under basic conditions.
First aid (overview): If on skin/eyes, rinse with water for ≥15 min; remove contaminated clothing. If inhaled, move to fresh air. If ingested, seek medical attention. Always follow SDS-specific guidance.
Spill/Fire: Absorb small spills with inert material; for fire, use CO2, dry chemical, or foam (water spray to cool).
Solvent Selection
Relevance: 2-Acetylcyclopentanone is an organic building block/ligand precursor rather than a bulk solvent. Solvent selection here refers to choosing media for its reactions and handling.
Miscibility/solubility: Typically soluble in ethers (THF, diethyl ether), esters (EtOAc), aromatics (toluene), chlorinated solvents (DCM, CHCl3), and polar aprotics (MeCN, DMF, DMSO); limited aqueous solubility.
Dielectric sensitivity: Enolate generation is favored in polar aprotic solvents with strong bases (THF, DMF). For metal chelation studies, non-coordinating solvents (toluene, DCM) can be preferred to avoid solvent competition.
When to choose specific media:
Enolate chemistry/C–C formation: Dry THF or 2-MeTHF under inert atmosphere with LDA, NaH, or alkoxides.
Chelation/complexation: Alcohols or hydrocarbons with mild base (Et3N) to form metal β-diketonates; avoid strongly coordinating solvents if measuring binding constants.
Purification: Elutes readily on silica with hexanes/EtOAc gradients; enol content can shift Rf—maintain consistent solvent blends.
Comparison notes:
THF vs 2-MeTHF: 2-MeTHF often offers greener profile and similar enolate performance.
DCM vs toluene: DCM provides faster dissolution and cooler reaction control; toluene is less halogenated and preferable for higher-temperature operations.
Storage and Reconstitution
Item-specific (from Product Data):
Storage: Room temperature, under argon (argon charged).
Shipping: Normal conditions.
Practical guidance (general; not item-specific):
Keep container tightly sealed under inert gas to minimize oxidative impurities and maintain a consistent keto–enol ratio.
Use dry, oxygen-impermeable bottles (e.g., amber glass) with PTFE-lined caps. After opening, re-purge headspace with argon or nitrogen.
Avoid prolonged exposure to strong bases in the storage container; dispense under inert atmosphere if frequent use in enolate chemistry is expected.
If low water content is critical, consider storing over activated 3 Å molecular sieves in a separate, compatible container; verify no reactivity before long-term use.
No reconstitution is required; the compound is used as supplied. Warm to ambient temperature if crystallization occurs during cold transport, then mix thoroughly before aliquoting.
Stability notes:
β-Diketones are generally stable at ambient conditions when protected from air and moisture; follow the SDS/CoA for any item-specific shelf-life or allowable impurity limits.
Research Use Only: As noted in Product Data, for research use only.
Structure and Identity
Brief overview: 2-Acetylcyclopentanone is a cyclic β-diketone (1,3-dicarbonyl) comprising a cyclopentanone ring bearing an acetyl substituent at the α-position, giving a conjugated 1,3-diketone system that exists in keto–enol tautomerism.
Item-specific (from Product Data)
CAS: 1670-46-8
CID: 98471
InChIKey: 266487 (as provided)
Storage note: Room temperature, Argon charged; Shipped: Normal
Literature/computed identifiers (general reference for this structure; not item-specific)
Common name: 2-Acetylcyclopentanone; synonyms: 1-acetylcyclopentan-2-one; cyclopentanone, 2-acetyl-
Molecular formula (literature): C7H10O2 (β-diketone)
Molecular weight (literature): ~126.15 g/mol
SMILES (literature): O=C(C)C1CCC(=O)C1 (represents a cyclopentanone with an acetyl at C2)
Structural features (general chemistry)
Functional groups: two ketones in a 1,3-relationship (β-diketone); activated methine (between carbonyls) prone to enolization.
Tautomerism: significant keto–enol tautomerism; enol form stabilized by intramolecular H-bond and conjugation.
Ring system: five-membered saturated carbocycle bearing one ketone within the ring and one exocyclic acetyl carbonyl.
Coordination: acts as a bidentate chelating ligand upon enolate formation (analogous to acetylacetone).
Synthetic Utility
Core functionalities and reactivity (general, literature):
1,3-Diketone motif: Activated methine permits facile enolate formation; supports mono- and bis-alkylation with control via base/temperature/stoechiometry.
Tautomerism: Enol form enables O-alkylation and metal chelation; keto form engages in nucleophilic addition/condensation.
Chelation: Forms six-membered chelate rings upon deprotonation and metal binding (β-diketonates), useful in catalysis and as volatile precursors (depending on metal).
Named reactions and applications:
Knoevenagel condensations with aldehydes to furnish conjugated enones (scaffold elaboration on the cyclopentyl core).
Michael additions to acrylates/enones to build quaternary centers at the active methine.
Hantzsch multicomponent reactions (1,3-dicarbonyl component) to dihydropyridines and related heterocycles.
Claisen-type condensations and Dieckmann variants leveraging its enolates for ring-fused architectures.
Retrosynthetic value:
Serves as a masked 1,3-dicarbonyl synthon enabling later selective transformations (e.g., decarbonylative strategies, selective reduction of one carbonyl, or cleavage to reveal acyl/ketone fragments).
Practical guidance:
Base choice tunes selectivity (LDA for kinetic, NaH/alkoxides for thermodynamic control). Temperature ramping from −78 °C to 0–25 °C often improves yields.
Inert atmosphere (argon) aligns with Product Data and helps maintain a consistent tautomer ratio and suppress oxidation.
Target Specificity
Not applicable. This product is a small-molecule chemical building block, not a biological targeting reagent. No antigen/epitope, clone, isotype, or species reactivity information applies.
Perguntas frequentes
What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature under argon. It is supplied under an argon blanket; reseal under inert gas after each use.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1670-46-8, the molecular formula is C7H10O2, and the molecular weight is 126.15 g/mol. InChIKey OSWDNIFICGLKEE-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Usamos cookies para garantir o funcionamento adequado do site e, quando permitido, para melhorar a sua experiência. Você pode gerenciar suas preferências a qualquer momento nas Configurações. Saiba mais em nossa Política de Cookies.
Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?
Lembrar-me mais tarde
Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.