This compound belongs to the class of organic compounds known as aryl alkyl ketones. These are ketones have the generic structure RC(=O)R', where R = aryl group and R'=alkyl group.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Revisões
Avaliações dos Clientes
Application Protocols
No item-specific validated bioassay or analytical protocols are provided for this reagent.
General laboratory guidance:
Preparing imines/oximes: combine 2-acetylpyridine (1.0 eq) with amine or hydroxylamine (1.1–1.5 eq) in toluene/EtOH, add catalytic acid/base as appropriate, and remove water (Dean–Stark or molecular sieves). Monitor by TLC or HPLC.
Organometallic additions: cool anhydrous solution of 2-acetylpyridine in THF, add RMgX dropwise at ≤0 °C, then quench with saturated NH4Cl. Extract, dry, and purify by silica chromatography.
Metal complex preparation: pre-form imine ligand from 2-acetylpyridine and the selected diamine; then treat with metal salt (e.g., Cu(II), Ni(II)) in alcohol or acetonitrile under inert atmosphere to assemble the complex.
For analytical characterization, 1H/13C NMR in CDCl3 or DMSO-d6 typically shows diagnostic acetyl methyl and carbonyl signals; IR shows strong C=O near 1680–1710 cm−1 (literature ranges). Adjust to your instrument and method requirements.
Biological Roles
Item-specific biological data are not provided. The following are general, non-clinical notes about the chemistry interface of 2-acetylpyridine.
Biochemical reactivity (general): the pyridine nitrogen can engage in hydrogen bonding and metal coordination; the carbonyl participates in reversible adduct formation with nucleophiles (e.g., imines/oximes).
Metabolic expectations (literature context): xenobiotic metabolism of aryl methyl ketones often includes carbonyl reduction (to secondary alcohols), N-oxidation of the pyridine ring, and oxidative side-chain transformations leading toward carboxylic acids.
Metal-binding motifs: condensation products (e.g., 2-acetylpyridine imines/oximes) are well-known chelators used to model metalloenzyme active sites in vitro; these roles are research-oriented and not clinical.
Spectroscopic handle: the aromatic nitrogen provides a site for probing interactions with proteins or nucleic acids in biophysical studies (e.g., via UV or fluorescence quenching changes upon binding in model systems).
Note: No claims of biological efficacy or clinical relevance are made. For research use only, consistent with the product’s Research Use Note.
Buffer Applications
2-Acetylpyridine is not a buffering reagent and is not typically used to prepare aqueous buffers. Its weak basicity (pyridine conjugate acid pKa ~3–4, literature) and limited water emphasis make it unsuitable as a primary buffer component.
For work involving this compound in aqueous systems, consider separate, compatible buffers (e.g., phosphate, acetate, or HEPES) appropriate to the biological or analytical context, while dissolving 2-acetylpyridine in a miscible co-solvent (EtOH, DMSO) if solubility is limiting.
Green Alternatives
Greener practice focuses on solvent and energy choices when using 2-acetylpyridine; the substrate itself is fixed by the synthesis goal.
Prefer bio-based or lower-toxicity solvents where compatible:
Replace chlorinated solvents (e.g., DCM) with EtOAc, 2-MeTHF, CPME, or Me-THF for extractions and reactions.
For imine/oxime condensations, use toluene or CPME with Dean–Stark; CPME offers broad water azeotrope and improved safety profile versus toluene.
For polar processes, consider MeOH/EtOH over MeCN where feasible.
Small comparison (general):
2-MeTHF vs THF: similar ethereal reactivity and organometallic compatibility; 2-MeTHF is partially bio-based, less miscible with water, facilitates phase separation, and often allows higher temperatures (bp ~80 °C) than THF.
CPME vs toluene: CPME forms efficient water azeotropes and has reduced peroxide formation tendency vs ethers like THF; higher flash point than many ethers.
Process intensification:
Use molecular sieves instead of azeotropic reflux where possible to reduce energy consumption.
Microwave heating can lower reaction times for condensations and heterocycle formations; assess scalability and safety.
Waste minimization:
Catalytic amounts of acid/base and solvent recycling lower E-factors.
Opt for solid-supported catalysts or scavengers to simplify workup and reduce solvent volumes.
Pharmaceutical Uses
No item-specific pharmacopeial status or excipient role is provided for this product.
General context (non-clinical):
Synthetic intermediate: 2-acetylpyridine is used in medicinal chemistry as a building block for heterocycles (e.g., quinolines) and as a handle for constructing ligand frameworks (Schiff bases) employed in catalytic steps of API synthesis.
Process chemistry: its UV activity and manageable volatility facilitate in-process controls (HPLC/GC). Low odor relative to pyridine simplifies handling in kilo-labs compared to neat pyridine, but standard containment is still advised.
Not typically an excipient: due to reactivity (carbonyl) and odor/basicity, it is not used as a formulation aid.
Compliance note: No therapeutic or clinical claims are made here. For research and manufacturing development contexts only.
Physical Properties
Item-specific specifications were not provided; see CoA/Spec Sheet for certified values. The following are literature/general reference properties for 2-acetylpyridine to aid method development.
Phase/appearance (literature): colorless to pale yellow liquid at ambient temperature
Boiling point (literature): ~204–206 °C at 1 atm
Melting point (literature): reported near −8 to 0 °C (liquid at room temperature)
pKa (conjugate acid of the pyridine N, literature): ~3.0–3.6 (electron-withdrawing acetyl lowers basicity relative to pyridine)
Vapor pressure (literature): low at room temperature (consistent with high bp)
Solubility (literature):
Water: moderate (tens of g/L) due to polarity; exact value varies by source
Organic solvents: miscible with polar organics (MeOH, EtOH, acetone, EtOAc, DMSO); good solubility in ethers and chlorinated solvents
Practical notes (general):
Hygroscopicity is low-to-moderate; avoid moisture ingress to preserve assay and color.
UV characteristics: aromatic carbonyl shows strong absorbance in near-UV; useful for HPLC UV detection (check your detector linearity and cutoff solvent).
Quality and Grades
Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers/additives: Not specified for this item; refer to CoA/Spec Sheet.
Guidance (general):
Analytical/reagent grades emphasize low non-volatile residue and low trace metals—useful for catalysis or spectroscopic work.
HPLC grade (when applicable to solvents) minimizes UV-absorbing impurities; for analyte standards, “analytical standard” or “reference material” designations provide tighter assay and impurity profiles.
Water and peroxide specifications are not typically defined for this ketone; if critical (e.g., for moisture-sensitive enolizations or organometallic additions), verify Karl Fischer water content and consider drying over molecular sieves (3 Å) prior to use.
Color and APHA: Pale coloration can increase with air/light exposure; inert storage helps maintain appearance.
Documentation: Request the lot-specific CoA for assay (%), GC purity profile, and any residual solvent or metal screening relevant to your application.
Reaction and Applications
This heteroaromatic aryl methyl ketone is valued as both a synthetic linchpin and as a precursor to N,N- and N,O-chelating ligands.
Typical uses (literature/general):
Imine/Schiff base formation with primary amines or anilines → bidentate ligands (2-acetylpyridine imines) for Fe, Co, Ni, Cu catalysis; tunable sterics/electronics.
Oxime formation with hydroxylamine → subsequent cyclizations or metal-binding oximes.
Friedländer quinoline synthesis: condensation with o-aminoaryl carbonyls to form quinolines (acid or base catalysis).
Nucleophilic additions to the carbonyl: Grignard/organolithium reagents afford secondary/tertiary alcohols bearing a 2-pyridyl group.
Alpha-functionalization: halogenation, acylation, and enamine/enolate chemistry enabled by the methyl ketone motif.
Oxidation/reduction: oxidative conversion to picolinic acid derivatives; carbonyl reductions to the corresponding alcohol.
Metal complexation: as a neutral N,O donor (via pyridine N and carbonyl O) or, more commonly, after condensation to form stronger chelates.
Practical notes:
The pyridine nitrogen can coordinate catalysts/metal reagents; a small amount of acid (AcOH, TsOH) can attenuate coordination when undesired.
For equilibrium-driven condensations, continuous water removal (Dean–Stark, molecular sieves 3 Å) improves conversions.
For base-sensitive partners, use milder dehydrating protocols (TiCl4-mediated or MS-assisted in aprotic solvents).
For air/moisture-sensitive organometallic additions, rigorously dry glassware and solvents; employ inert atmosphere as indicated.
Reaction Conditions
General, literature-based guidance; optimize for your substrate set.
Imine formation (with anilines or amines):
Conditions: toluene or CPME, catalytic p-TsOH or AcOH, Dean–Stark or 3 Å molecular sieves.
Temperature/time: reflux 2–12 h; or 25–60 °C with sieves 4–24 h.
Notes: remove water to drive equilibrium; add a trace of TiCl4 or BF3·OEt2 for challenging anilines.
Oxime formation (with NH2OH·HCl):
Solvent: EtOH or MeOH; base (pyridine or NaOAc) or buffer to liberate free hydroxylamine.
Temperature: 25–60 °C, 1–6 h.
Grignard/organolithium additions:
Solvent: anhydrous THF, 2-MeTHF, or Et2O under inert atmosphere.
Temperature: −78 to 0 °C for addition; warm to rt for workup.
Notes: pyridine N can coordinate; stoichiometry and temperature control limit over-addition.
Friedländer quinoline synthesis:
Conditions: 2-acetylpyridine + o-aminobenzaldehyde, AcOH or KOH/EtOH; or heterogeneous acid catalysts.
Temperature: 80–120 °C (solvent-dependent), 2–8 h.
Alpha-halogenation:
Reagents: NBS/NCS with acid catalyst; or Br2/Cl2 under controlled conditions.
Solvent: AcOH or aprotic solvents; 0–25 °C to control selectivity.
Yields vary widely (50–95% typical for condensations under optimized conditions). Monitor by TLC/HPLC; consider in situ FTIR for water-removal endpoints.
Safety and Handling
GHS/SDS status for this specific item: Not specified for this item; refer to SDS.
Signal word / H-statements / pictograms: Not specified for this item; refer to SDS.
General laboratory safety guidance for heteroaromatic ketones (literature/experience-based; not a substitute for SDS):
Likely hazards: may cause skin/eye irritation and respiratory tract irritation; harmful if swallowed. Avoid vapor/aerosol formation despite its low volatility.
PPE: lab coat, nitrile gloves, safety glasses or face shield; use in a fume hood when handling neat or preparing heated solutions.
Special risks: carbonyl compounds can form Schiff bases with amines; keep away from reactive amines unless intended. Though not a classical peroxide former, follow routine solvent storage hygiene.
First aid (overview):
Skin: wash with soap/water; remove contaminated clothing.
Eyes: rinse cautiously with water for several minutes; seek medical attention.
Inhalation: move to fresh air; monitor breathing; seek medical attention if symptoms persist.
Ingestion: rinse mouth; do not induce vomiting; seek medical advice.
Fire safety: combustible liquid; use CO2, dry chemical, or foam. Cool containers with water spray.
Always consult the product’s SDS for authoritative hazard classification and response measures.
Solvent Selection
2-Acetylpyridine is a moderately polar, aprotic organic compound. It dissolves well in most polar organics and many less-polar media.
Polarity/miscibility (literature):
Miscible or highly soluble in MeOH, EtOH, acetone, acetonitrile, EtOAc, DCM, THF, CPME, toluene.
Moderate water solubility due to heteroatom content and carbonyl.
Dielectric context: behaves like other aryl methyl ketones; polarity supports ionic and polar reactions.
Selection tips (general):
Carbonyl chemistry (imine/oxime formation): employ azeotroping solvents (toluene, xylenes) with Dean–Stark or molecular sieves to remove water and drive equilibrium.
Electrophilic aromatic substitution or condensations: alcoholic solvents or acetic acid/water mixtures can be effective depending on transformation.
Chromatography: normal-phase silica with hexane/EtOAc or DCM/MeOH gradients; UV at 254 nm provides strong response.
Comparison (general guidance):
Versus acetophenone: higher polarity and basicity (pyridine N) can coordinate catalysts—sometimes beneficial (rate, selectivity), sometimes inhibitory (poisoning); choose solvent and additive acid/base accordingly.
Versus pyridine: lower basicity due to the acetyl group; reduced volatility and odor; easier handling in open bench operations.
Shipping: Normal (no special thermal shipping condition indicated in Product Data).
Practical storage guidance (general):
Keep tightly closed under inert gas (argon or nitrogen) to minimize oxidative discoloration and moisture ingress.
Store away from strong oxidizers, acids, and bases. Protect from prolonged light exposure to maintain appearance.
If dispensing via septum, backfill headspace with inert gas after use.
Reconstitution/handling:
Physical state is typically liquid at room temperature; no reconstitution required.
For anhydrous applications, consider drying over 3 Å molecular sieves for several hours and filtering prior to use; verify water content by Karl Fischer if critical.
Warm gently if crystallization occurs at low ambient temperatures; mix to homogeneity before sampling.
Always consult the lot-specific CoA/SDS for definitive storage stability and handling details. Research use only, as stated in the Product Data.
Structure and Identity
A heteroaromatic ketone combining a pyridine ring with an acetyl group at the 2-position; commonly used as a versatile building block and ligand precursor.
Item-specific identifiers (from Product Data)
Product name: 2-Acetylpyridine
CAS: 1122-62-9
PubChem CID: 14286
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Literature identifiers and descriptors (general reference; not item-specific)
Basic heteroaromatic nitrogen: modulates electronics of the ring and carbonyl; enables ligand design and metal coordination; can be transiently protonated to control reactivity/selectivity.
Representative transformations (literature):
Schiff base ligands: 2-acetylpyridine + primary amines → N^N or N^N^N pincer-type ligands after further elaboration; common in late-transition-metal catalysis.
Friedländer annulation: condensation with o-aminobenzaldehydes/ketones → quinolines under acid or base catalysis.
Nucleophilic additions: RMgX/RLi additions to give 2-pyridyl-substituted alcohols; subsequent functional group interconversions.
Oxidations/reductions: selective reduction to the benzylic alcohol; over-oxidation to picolinic acid derivatives using strong oxidants.
Halogenation and cross-coupling: alpha-bromo derivatives serve as handles for further C–C bond formation.
Strategic value:
The juxtaposition of a coordinating N with an activating carbonyl makes 2-acetylpyridine a gateway to chelating scaffolds and heteroaromatic frameworks, streamlining SAR exploration in discovery chemistry.
Target Specificity
Not applicable. This product is a small-molecule reagent, not a biological targeting agent or antibody. No antigen/epitope specificity, clone, or isotype information applies.
Perguntas frequentes
What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature under argon. It is supplied under an argon blanket; reseal under inert gas after each use.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1122-62-9, the molecular formula is C7H7NO, and the molecular weight is 121.14 g/mol. InChIKey AJKVQEKCUACUMD-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Usamos cookies para garantir o funcionamento adequado do site e, quando permitido, para melhorar a sua experiência. Você pode gerenciar suas preferências a qualquer momento nas Configurações. Saiba mais em nossa Política de Cookies.
Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?
Lembrar-me mais tarde
Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.