Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Revisões
Avaliações dos Clientes
Application Protocols
No vendor-tested application protocols are provided in the Product Data for this item.
General protocols for small-molecule tools (adapt as appropriate):
Stock preparation:
Dissolve compound in anhydrous DMSO to 10–50 mM (or to solubility limit confirmed by CoA or a solubility test).
Vortex and, if needed, sonicate gently; filter through 0.22 μm PTFE to clarify.
Aliquot into amber vials or tubes; store at −20 °C.
Cell-based assay dosing:
Thaw an aliquot on ice; dilute into pre-warmed media to achieve desired final concentration with ≤0.1–0.5% DMSO.
Include vehicle controls at matching DMSO levels; run 8–10 point CRCs in triplicate.
Biochemical enzyme assay:
Prepare serial dilutions in assay buffer containing 0.01% non-ionic detergent to mitigate aggregation artifacts.
Include counterscreens for fluorescence/absorbance interference when relevant.
Important: These are general research-use guidelines and not item-specific validated protocols. Optimize for your assay system and consult the SDS/CoA.
Biological Roles
Item-specific biological target, pathway, and mechanism are not provided in the Product Data. No claims are made here; consult the CoA/Spec Sheet and primary literature for the exact role of BKM1740, if available.
General considerations for small-molecule research tools:
Potential modes of action include enzyme inhibition/activation, receptor modulation, ion channel interaction, or perturbation of protein–protein interactions. Do not assume any specific mechanism without verified documentation.
Off-target effects are common; design experiments with orthogonal controls and concentration ranges that avoid cytotoxicity/artifacts.
ADME properties (permeability, stability, efflux, protein binding) are critical for cellular readouts but are not specified for this item; determine empirically when needed.
Experimental guidance:
Establish a robust dose–response (e.g., 10-point, half-log spacing) and report the vehicle percentage.
Validate readouts using complementary assays (biochemical vs cellular) to decouple target engagement from downstream phenotypes.
If fluorescence- or luminescence-based assays are used, pre-screen for compound interference with detection reagents.
Research use only:
This product is for research use only. Not for diagnostic or therapeutic applications.
Buffer Applications
This product is not described as a buffering agent, and no pKa or acid/base functionality is provided in the Product Data. Therefore, buffer-specific applications are not typically applicable.
Guidance if dissolution into buffers is required for assays:
Prepare a concentrated stock in DMSO, then dilute into your desired buffer (e.g., PBS, HEPES, Tris) while keeping final DMSO low (≤0.1–0.5%).
Pre-evaluate compound stability in the chosen buffer over the assay time window (assess by LC-MS or HPLC). Avoid extreme pH without supporting data.
Filter sterilize if needed for cell culture; verify that filters (PTFE/PES) do not adsorb the compound.
For actual buffering needs, select a dedicated buffer system with an appropriate pKa (e.g., phosphate pKa2 ~7.2, HEPES pKa ~7.5, Tris pKa ~8.1 at 25 °C; literature values) and follow standard recipes.
Green Alternatives
Green chemistry considerations are typically applied to solvents and bulk reagents. For a bioactive small-molecule tool compound like BKM1740 (no solvent role indicated), “green alternative” selection is generally not applicable to the compound itself.
Practical sustainability steps (general):
Minimize DMSO volumes and prepare concentrated stocks to reduce waste.
Use greener co-solvents where feasible (e.g., ethanol or water-based buffers) if compound solubility and stability permit.
Right-size experiments to limit unused working solutions; aliquot stocks to extend shelf life and avoid repeated freeze–thaw.
Dispose of organic waste streams properly; segregate halogenated vs non-halogenated.
If your workflow involves auxiliary solvents:
Consider 2-MeTHF, CPME, or ethyl acetate instead of chlorinated solvents for synthetic steps preceding bioassays, where chemically appropriate (literature guidance; evaluate case-by-case).
For chromatography, use optimized gradients to cut solvent consumption; consider SFC where applicable.
Because no structure or solvent role is specified for this item, there are no compound-specific green substitutions to recommend. Refer to your institutional green lab program for additional best practices.
Pharmaceutical Uses
No pharmacopeial status, excipient role, or formulation use is provided for this item. This product is supplied for research use only and is not intended for human or veterinary use.
General formulation considerations for research compounds (non-clinical):
For in vitro work: DMSO stock solutions aliquoted and stored at −20 °C; protect from moisture and repeated freeze–thaw.
For in vivo exploratory research (if permitted by your institution and with appropriate approvals): vehicle selection often involves combinations of PEG-400, ethanol, Cremophor EL, Tween 80, Captisol, or acidified saline; compound-specific data are required—consult literature and perform stability/tox assessments. No recommendations are made here for this item.
Do not reference or imply clinical indications. Any preclinical use must comply with institutional and regulatory guidelines.
Documentation:
Maintain batch CoA/SDS with study records.
Report vehicle composition and dosing solution preparation transparently in publications.
Physical Properties
Item-specific physical constants are not provided in the Product Data. Do not assume values; consult the batch CoA/SDS.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Melting point (literature/estimation): Not specified (structure not provided). Consult CoA.
Boiling point (literature): Not applicable/not specified; most life-science actives are non-volatile solids. Confirm with CoA.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Solubility: Not specified for this item; refer to CoA/Spec Sheet.
General guidance (literature/common practice for small-molecule tools): initial dissolution in anhydrous DMSO to prepare 10–50 mM stocks; secondary dilution into aqueous buffers containing co-solvent (DMSO final ≤0.1–0.5%) for cell assays. Confirm compatibility with your system.
LogP/logD, pKa, refractive index: Not specified for this item; refer to CoA/Spec Sheet.
UV-Vis characteristics: Not specified; if required for quantitation, determine ε and λmax experimentally or consult CoA.
Practical notes (general):
If solid at −20°C storage, allow to equilibrate to room temperature in a desiccator before opening to avoid condensation.
Hygroscopicity, polymorphism, and hydrate/solvate form are unknown; check CoA and handle under dry conditions until confirmed.
Quality and Grades
Item-specific grade/purity are not provided in the Product Data.
Grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
Typical documentation provided for life-science small molecules includes HPLC purity (%), identity by NMR and/or LC-MS, and water/volatile content by KF/TGA. Only rely on values listed on the batch CoA.
Guidance on interpreting common grades (general knowledge):
Research grade: suitable for in vitro/in vivo research workflows; not for clinical use.
HPLC grade (when applicable to solvents): low UV absorbance for chromatography; not relevant unless the product is a solvent (not indicated here).
Bioactive screening grade: emphasizes identity and organic purity; trace inorganics/bioburden typically controlled but not to GMP standards.
Stabilizers and form:
Stabilizers, salt form, and counter-ions are not specified for this item; refer to CoA/Spec Sheet.
If provided as a salt (e.g., HCl, TFA), reported purity may include counter-ion mass; account for this when preparing molar solutions.
Batch-to-batch considerations:
Record and report lot numbers in publications.
If your assay is sensitive, re-verify purity by orthogonal methods (e.g., LC-UV at multiple wavelengths).
Reaction and Applications
Item-specific intended use is listed under Life Science category with no detailed application text provided. Based on category placement, BKM1740 is likely intended as a bioactive research reagent rather than a general synthetic building block or solvent.
Potential research applications (general for small-molecule tools):
Chemical biology: probe studies to modulate or interrogate cellular pathways (target specificity not provided; verify in literature/CoA before use).
High-throughput or phenotypic screening: evaluate concentration–response relationships; maintain careful control of vehicle and plate effects.
Target validation workflows: pair with genetic perturbations (e.g., RNAi/CRISPR) to cross-validate phenotypes.
If used in chemistry workflows (only if structure supports):
Without structural information, specific reaction classes (e.g., cross-couplings, nucleophilic substitutions) cannot be recommended.
Assay considerations (general):
Determine solubility limit in your assay buffer and verify compound stability over experimental time.
Control for autofluorescence or intrinsic absorbance if using optical readouts; run vehicle-only and spectral scans.
For enzyme assays: screen for aggregation by adding non-ionic detergent (e.g., 0.01% Triton X-100) and use orthogonal counterscreens.
Reaction Conditions
Specific reaction conditions are not applicable without structural and functional group information. No item-specific data are provided in the Product Data.
If you intend to use this material in chemical reactions (only after confirming structure):
Solvent choice, temperature, catalysts, and reagent stoichiometry should be guided by the known reactivity of the functional groups present.
Establish small-scale screens to test stability under heat, acid/base, oxidative, and reductive conditions.
Monitor reactions by LC-MS/HPLC with multiwavelength detection to capture potential decomposition pathways.
For bioassay preparation (more likely use case for this Life Science item):
Typical stock: 10–50 mM in anhydrous DMSO; store at −20 °C in aliquots to avoid freeze–thaw.
Working solutions: prepare fresh on the day of use; maintain final DMSO at ≤0.1–0.5% unless validated otherwise.
Light sensitivity is unknown; protect from light as a precaution during handling and storage until confirmed.
Safety and Handling
Authoritative safety information resides in the SDS. The Product Data do not provide hazard statements or GHS classification for this item.
GHS signal word: Not specified for this item; refer to SDS.
H-statements and pictograms: Not specified for this item; refer to SDS.
General laboratory precautions for small-molecule research reagents:
PPE: lab coat, nitrile gloves, safety glasses or face shield as appropriate.
Engineering controls: use in a fume hood to avoid inhalation of dust/aerosols; avoid skin/eye contact.
Avoid ingestion/inhalation; do not pipette by mouth. Wash thoroughly after handling.
Incompatibilities: Unknown for this specific item; as a precaution, keep away from strong oxidizers/reducers, acids/bases until compatibility is known (consult SDS).
First aid (general):
Skin/eye contact: rinse with water for ≥15 min; remove contaminated clothing; seek medical attention as needed.
Inhalation: move to fresh air; seek medical attention if symptoms persist.
Ingestion: rinse mouth; do not induce vomiting; seek medical attention.
Spills: avoid dust formation; collect with inert absorbent; dispose of per institutional and local regulations.
Waste: Dispose as hazardous chemical waste; classification depends on SDS hazard profile.
Special risks:
Sensitization/cytotoxicity/teratogenicity cannot be excluded for bioactive molecules. Minimize exposure and handle as potentially harmful.
Always verify any light/moisture/air sensitivity on the CoA/SDS; protect accordingly if specified.
Solvent Selection
Item-specific solubility and polarity are not provided. The following guidance reflects common practice for small-molecule bioactive compounds.
Primary stock solvent: DMSO is typically preferred due to broad solvency and biological compatibility in small volumes.
Alternative solvents: DMF, ethanol, methanol, or acetonitrile, subject to compatibility with your assay and compound stability (verify by CoA/SDS and pilot tests).
Aqueous use: Prepare concentrated DMSO stock (e.g., 10–50 mM), then dilute into buffered media; maintain final DMSO at ≤0.1–0.5% for most cells unless otherwise validated.
pH effects: Without pKa/structure, avoid extreme pH; if ionizable groups are suspected, assess solubility across pH 2–10 in small-scale screens.
Comparison (general):
DMSO: highest success rate dissolving diverse scaffolds; may extract plastics—use glass when possible.
Ethanol: less cytotoxic at low % but dissolves fewer high-logP solids.
DMF: strong solvency; consider toxicity and material compatibility.
Aqueous buffers: only after co-solvent or specific ionization strategies are validated.
Practical tips:
Warm gently (≤40 °C) and sonicate to aid dissolution; avoid prolonged heating.
Filter sterilize through PTFE or PES if needed for sterile assays; pre-check adsorption losses.
Document exact solvent lot and concentration for reproducibility.
Storage and Reconstitution
Item-specific storage and shipping conditions are provided; other details are not specified and should be confirmed on the CoA/SDS.
Storage conditions (from Product Data): Store at −20 °C.
Shipped in (from Product Data): Ice chest + Ice pads.
Form and appearance: Not specified for this item; refer to CoA/Spec Sheet.
General guidance for small-molecule solids or concentrated solutions:
Upon receipt: Keep cold; allow to equilibrate to room temperature in a desiccator before opening to prevent condensation.
Reconstitution (if solid):
Use anhydrous DMSO to prepare concentrated stock (e.g., 10–50 mM), unless CoA indicates alternate solvent.
Mix thoroughly; if needed, warm gently (≤40 °C) and sonicate briefly. Avoid repeated heating/cooling cycles.
Aliquoting: Dispense into single-use aliquots in amber vials/tubes to minimize freeze–thaw and light exposure.
Stability: Not specified for this item; refer to CoA/Spec Sheet. As a precaution, avoid >3 freeze–thaw cycles and store desiccated.
Light/moisture sensitivity: Not specified; protect from moisture and light until confirmed.
Research use note: For research use only.
Structure and Identity
Item-specific data available from Product Data: none beyond identifiers. Where specific values are missing, consult the product CoA/Spec Sheet.
SKU: B1454389
Product name: BKM1740 (catalog/trade name)
CAS: 1070966-97-0 (identifier only; not sufficient to infer structure here)
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general guidance):
Functional groups, ring systems, and stereochemistry cannot be described without a structure. Not specified for this item; refer to CoA/Spec Sheet.
If using this product as a bioactive small molecule (common for Life Science category entries), standard practice is to prepare DMSO stock solutions once structure/solubility are confirmed from the CoA or SDS.
Notes on identity confirmation (general best practices):
Verify identity via vendor CoA (NMR/LC-MS/HRMS/HPLC) prior to critical experiments.
Cross-check CAS and catalog name against trusted databases and your internal LIMS before use.
For publication-grade work, retain batch-specific analytical documentation with reported lot numbers.
Synthetic Utility
The Product Data do not provide a structure or functional group information; consequently, specific synthetic transformations or building-block roles cannot be assigned.
General notes:
If your intent is to derivatize or immobilize the molecule (e.g., for PROTACs, affinity matrices, or fluorescent probes), request or determine the structure and consider available handles (amines, acids, halides, phenols) for conjugation chemistry.
Absent structural data, avoid planning transformations; instead, obtain full spectral characterization (1H/13C NMR, LC-MS, HRMS) and functional group analysis prior to route design.
For SAR work, ensure access to analogs and consider scalable synthetic routes only once the core scaffold and protecting group strategy are known.
If the compound is solely a bioactive tool for assays, synthetic utility may be limited to stock preparation and formulation rather than chemical transformation.
Target Specificity
Item-specific biological target(s), selectivity profile, and species reactivity are not provided in the Product Data for BKM1740.
Primary target/pathway: Not specified for this item; refer to CoA/Spec Sheet and primary literature.
Potency metrics (e.g., IC50, Ki), off-targets, and cellular efficacy: Not specified for this item; refer to CoA/Spec Sheet.
If the compound is used as a pathway probe, validate target engagement with an orthogonal assay (e.g., CETSA, NanoBRET, phospho-biomarker changes) in your system.
Recommendation:
Before experimental use, verify target identity, assay conditions, and any known counter-screens from trusted databases or publications corresponding to the CAS number 1070966-97-0.
Report lot numbers and source in publications for reproducibility.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.
