Borate buffer - 0.05mol/L,pH9.0

Cat. No.: B407195
Disponível para encomenda
GRAU & PUREZA 0.05mol/L,pH9.0
Storage
Room temperature
Shipped In
Normal
★
Tamanho
USA
Alemanha (EU)*
Preço
Qtd
500ml
B407195-500ml
Sob encomenda · 8–12 semanas

147,90US$

172,90US$
Gravar 25,00 US$ (14.46%)
Enter a quantity for the sizes you want to add.

Visão geral

Application:

Borate buffered saline has been used to determine whether heat-killed, borate-buffered suspensions of Gordonia bronchialis, Rhodococcus coprophilus or Tsukamurella inchonensis can be used to treat canine flea allergy. Borate buffered saline has also been used to investigate the effects of lentivirus mediated siRNA targeting human metastasis suppressor 1 (MTSS1, MIM-B gene) gene on the invasive and metastatic potentials of hepatocellular carcinoma (HCC) MHCC97H cells. Borate buffered saline has been used to determine the effects of packaging solution osmolality and buffering agent on soft contact lens parameters.

Especificações

Especificações e pureza
0.05mol/L,pH9.0
Condições de armazenamento de armazenamento
Room temperature
Enviado em
Normal

Dados avançados

Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDataItem
I2515339I2515339Certificate of AnalysisSep 18, 2025 B407195
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Application Protocols

Item-specific validated protocols and recommended dilutions: Not specified for this item; refer to CoA/Spec Sheet.

General protocol outlines (literature-based; adapt to your exact product concentration/composition):

  • Preparation of 1× TBE from 10× stock:
    • Mix 100 mL 10× TBE with 900 mL water (18 MΩ·cm) to 1 L total. Verify pH (typically ~8.3) and conductivity.
  • Agarose gel electrophoresis in 1× TBE:
    1. Prepare 0.8–2.0% agarose in 1× TBE; heat to dissolve.
    2. Cool to ~60 °C; add nucleic acid stain per manufacturer.
    3. Cast gel; load samples; run at 5–10 V/cm until separation is achieved.
  • NHS-ester protein labeling in borate buffer:
    1. Exchange protein into 50 mM borate, pH 8.5 (desalt column or dialysis).
    2. Add NHS-activated dye at 5–10× molar excess; incubate 30–60 min at RT.
    3. Quench with Tris or glycine; purify labeled protein (SEC/desalting).

Quality tips:

  • Filter sterilize (0.22 µm) if sterility is required; store aliquots to limit contamination.
  • Confirm absence of interfering species (e.g., primary amines, azide for HRP-based assays) based on downstream use.
Biological Roles

Item-specific biological testing/claims: Not specified for this item; for research use only.

General biology of boron/borate (literature):

  • Boron is an essential micronutrient for plants, implicated in cell wall structure and membrane function. In animals, boron has proposed roles in mineral metabolism, though it is not classically essential for humans; no clinical claims are made here.
  • Chemical interactions relevant to biochemistry:
    • Borate forms reversible complexes with cis-diols in carbohydrates and nucleotides (e.g., ribose in RNA), which can modulate enzyme activities and the behavior of biomolecules.
    • Complexation with catechols and diol-bearing ligands under alkaline pH is used in affinity separations and biosensor design.
  • Biophysical considerations:
    • Buffering near pH 9–10 provides a milieu for studying alkaline phosphatases, certain oxidases, and amine-reactive chemistries while limiting acid-catalyzed degradation pathways.
    • EDTA (if present, e.g., in TBE) chelates divalent cations, protecting nucleic acids from nuclease activity but inhibiting metalloenzymes; confirm composition on the Spec Sheet for this item.

Use restrictions:

  • For research use only. Not for human or animal diagnostic or therapeutic applications.
Buffer Applications

This section outlines typical uses and preparation strategies for borate buffers (general literature guidance; adjust to your exact product specs on the CoA/Spec Sheet).

  • Working pH range: ~8.2–10.2; common setpoints: 8.3, 8.5, 9.0, 9.5, 10.0.
  • Typical molarities: 10–200 mM for biochemistry; for electrophoresis, 0.5×–1× TB/TBE (e.g., 89 mM Tris, 89 mM borate, 2 mM EDTA at 1×; literature formulation).

Example preparation (literature; not item-specific):

  • 0.1 M Borate buffer, pH 9.0 (boric acid/NaOH system):
    1. Dissolve 6.183 g boric acid (MW 61.83) in water, bring to ~900 mL.
    2. Adjust pH to 9.0 with ~1 M NaOH while stirring (monitor temperature).
    3. Bring to 1.000 L with water; verify pH at 25 °C. Filter sterilize (0.22 µm) if sterility is required.
  • TBE (1×, literature formulation): 89 mM Tris base, 89 mM boric acid/borate, 2 mM EDTA; dilute from 10× stocks to working strength.

Practical notes:

  • Calibrate pH meter at 25 °C; temperature affects apparent pKa.
  • For nuclease-sensitive workflows, prepare with nuclease-free water and sterile-filter; avoid sodium azide in peroxidase-based assays.
  • Be mindful of borate–diol interactions with carbohydrates and RNA; choose phosphate/Good’s buffers if interference is observed.
Green Alternatives

Environmental/green chemistry considerations for buffer choice (general guidance; not item-specific):

  • Boron discharge: Many regions regulate boron in wastewater due to plant toxicity at elevated levels. Minimize volumes and collect borate-containing waste when possible.
  • Biodegradability/toxicity: Borate is inorganic and persistent; choose alternative buffers where boron limits or persistence are concerns.

Comparison (literature-based):

  • Borate (pH 8.2–10.2): Strong cis-diol complexation; good for CE of carbohydrates and alkaline bioconjugations. Tradeoffs: boron in effluent; potential enzyme inhibition.
  • Tris (pH ~7–9): Widely available, low toxicity; primary amine can interfere with NHS-esters and other acylation/oxidation chemistries.
  • Bicarbonate/Carbonate (pH ~9–10.5): Inexpensive, CO2-buffered, readily neutralized; gas exchange can drift pH, higher conductivity can increase Joule heating.
  • CHES/CAPSO (Good’s buffers, pH ~9–10.5): Minimal metal/biochemical interactions; generally higher cost, less cis-diol complexation utility.

Best practices:

  • Right-size your buffer molarity to reduce chemical burden.
  • Reuse buffers within validated limits and dispose via appropriate collection.
  • For LC–MS or volatile needs, choose ammonium bicarbonate/formate/acetate (greener, volatile) when pH range and compatibility allow.
Pharmaceutical Uses

Item-specific pharmacopeial status and excipient grade: Not specified for this item; refer to CoA/Spec Sheet.

Formulation context (general, non-clinical):

  • Borate buffers are widely used in ophthalmic solutions as pH adjusters and buffers; they can contribute to isotonicity in combination with polyols (e.g., mannitol, sorbitol) and show preservative-enhancing effects with certain quaternary ammonium agents (literature).
  • For topical and parenteral formulations, excipient selection is driven by compatibility, osmolality, pH stability, and regulatory acceptance; confirm grade and impurity limits if use as an excipient is intended.
  • Analytical development:
    • Borate buffers (non-volatile) are suitable for UV/fluorescence assays but are generally avoided in LC–MS due to non-volatility and potential source fouling.
  • Manufacturing considerations:
    • Prepare with compendial water quality (e.g., Purified Water, WFI) as applicable; control bioburden/endotoxin and particulate levels.
    • Validate container–closure compatibility; borate is generally glass-compatible, though high-pH solutions can slowly attack silica surfaces over prolonged exposure.

No therapeutic or clinical performance claims are made. This product is for research/laboratory use only.

Physical Properties

Item-specific physical specifications: Not specified for this item; refer to CoA/Spec Sheet.

General/literature properties for the borate buffer system (for method development context; not item specifications):

  • Apparent pKa (B(OH)3/B(OH)4−): ~9.24 at 25 °C; decreases slightly with increasing ionic strength and temperature (literature).
  • Effective buffering range: approximately pH 8.2–10.2 (literature).
  • Solubility (components, literature):
    • Boric acid is highly soluble in hot water and moderately soluble at room temperature; common borate salts (e.g., sodium tetraborate) are readily water-soluble.
  • Density/refractive index: dependent on concentration; for aqueous buffers, values track water with small increases as molarity rises (literature).
  • Conductivity: increases with ionic strength; commonly suitable for electrophoresis at 0.5–1× working concentrations (literature for TB/TBE systems).
  • Complexation: borate forms reversible complexes with cis-1,2- and cis-1,3-diols (e.g., saccharides, ribose), impacting apparent pKa and activity in the presence of polyols (literature).

Practical implications:

  • Choose temperature and ionic strength consistent with desired pH; calibrate pH at working temperature.
  • For enzyme work, be aware that borate complexation can alter available Mg2+ or interact with cofactors, subtly changing solution properties (literature guidance).
Quality and Grades
  • Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

Context for buffer-grade materials (general guidance):

  • Analytical/AR grade: Low levels of inorganic/organic contaminants suitable for routine analytical work; consistent pH performance.
  • Molecular biology/RNase/DNase-free: Prepared using nuclease-free water and certified to be free of nucleases; critical for RNA/DNA workflows.
  • HPLC/UV grade (buffers for chromatography): Low UV absorbance and particulate burden; filtered (e.g., 0.2 µm) to minimize baseline noise and column fouling.
  • Cell culture grade: Endotoxin/bioburden specifications; sterile-filtered and often gamma-irradiated or autoclaved.

What to check on the CoA/Spec Sheet for this item:

  • Exact composition (boric acid vs sodium/potassium borate; presence of Tris or EDTA), molarity, and pH at 25 °C.
  • Conductivity and UV absorbance (if relevant to your application).
  • Bioburden/endotoxin or nuclease testing claims (if intended for bioanalytical use).
  • Filtration/sterility status, particulate limits, and lot-to-lot pH tolerance (e.g., ±0.05 pH units).

Stabilizers/preservatives:

  • If present (e.g., sodium azide, ProClin), they will be listed on the SDS/Spec Sheet and may impact downstream enzymology and disposal requirements. Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications

Applications are driven by the borate buffer’s alkaline pH range and selective complexation with cis-diols (literature/general):

  • Electrophoresis media:
    • TB/TBE buffers for DNA/RNA gel electrophoresis; TBE adds EDTA to chelate divalent cations and protect nucleic acids. Borate contributes low conductivity at given ionic strength, enabling sharper bands at modest voltages.
  • Capillary electrophoresis (CE):
    • Borate complexation aids resolution of carbohydrates, glycoproteins, and cis-diol-containing analytes by altering effective charge/size.
  • Enzymology and bioconjugation:
    • Working pH 8–10 supports reactions requiring mild basicity (e.g., NHS-ester amide couplings favor pH 8.3–8.8; borate has minimal nucleophilicity compared to Tris).
    • Formation of reversible boronate esters with catechols and cis-diols under alkaline pH enables affinity separations and sensor assembly.
  • Analytical chemistry:
    • In colorimetric assays of polyols/sugars, borate buffers can enhance reactivity or specificity via complexation.
  • Cautions (practical tips):
    • Borate can interact with diols in cofactors (e.g., NAD+/NADP+) and ribose in RNA, potentially inhibiting some enzymes; test compatibility.
    • Magnesium and calcium activities can be perturbed by EDTA in TBE; select TB (no EDTA) if metal cofactors are required.
    • Adjust pH at the intended working temperature; borate pKa has modest temperature dependence.
Reaction Conditions

General conditions and parameters where borate buffers are commonly employed (literature guidance; not item-specific):

  • pH window: 8.2–10.2; adjust with NaOH/KOH for alkaline setpoints, or with HCl for slight acidification. Verify pH at working temperature.
  • Temperature: 4–37 °C for biomolecular work; up to 60–80 °C in certain analytical protocols (e.g., CE). Monitor pH drift with temperature.
  • Ionic strength: 10–200 mM borate typically; add NaCl/KCl if additional ionic strength or conductivity is needed.
  • Boronate ester formation with cis-diols/catechols:
    • Typical: 10–100 mM borate, pH 8.5–9.5, ambient temperature; equilibrium reached within minutes to hours depending on diol structure. Reversible by lowering pH below ~7 or adding competing diols.
  • Bioconjugation (NHS-ester to amines):
    • 25–100 mM borate, pH 8.3–8.8, 0–25 °C; reaction times 0.5–2 h; minimize hydrolysis by preparing fresh NHS-ester solutions.
  • Electrophoresis (TBE/TB):
    • 0.5×–1× working strength; run voltages 5–10 V/cm for agarose gels; monitor Joule heating. EDTA (in TBE) at 1–2 mM chelates Mg2+.

Compatibility notes:

  • Avoid strong oxidants/reductants unless validated; borate is generally inert but pH may catalyze side reactions.
  • Organic co-solvents (≤20–30% v/v MeOH/ACN) are often tolerated but may shift pKa/pH; recalibrate after mixing.
Safety and Handling
  • GHS/SDS details for this specific item (signal word, H-statements, pictograms): Not specified for this item; refer to SDS.

General safety considerations for borate-containing buffers (literature/generic):

  • Hazards: Boric acid and some borate salts can cause eye/skin irritation upon contact; ingestion of significant quantities is harmful. Certain borates (e.g., disodium tetraborate) are classified by some jurisdictions for reproductive toxicity; handle with care and minimize exposure.
  • PPE: Use lab coat, safety goggles/face shield, and suitable chemical-resistant gloves (e.g., nitrile). Employ good hygiene; avoid inhalation of dust/aerosols and ingestion.
  • Engineering controls: Handle powders/solids (if applicable) in a fume hood or ventilated enclosure to limit airborne dust. When adjusting pH with bases/acids, add slowly with stirring to control heat and splashes.
  • Incompatibilities: Strong acids will neutralize/shift pH; dehydration at high temperature can convert borates to metaborates (not typical in aqueous use). Avoid mixing with oxidizable organics when highly basic. Borate complexes with cis-diols and may sequester diol-containing additives.
  • First aid (overview; follow SDS):
    • Skin/eye: Rinse with water for ≥15 min; remove contaminated clothing; seek medical advice if irritation persists.
    • Inhalation: Move to fresh air; seek attention if symptoms occur.
    • Ingestion: Rinse mouth; do not induce vomiting; get medical attention.
  • Spill response: For solutions, absorb with inert material; for powders, avoid dust and sweep/vacuum with HEPA. Dispose per local regulations.
Solvent Selection

As a water-based buffer, the primary solvent is high-purity water.

  • Item-specific solvent composition: Not specified for this item; refer to CoA/Spec Sheet.

General guidance (literature/typical practice):

  • Water quality: Use 18 MΩ·cm deionized water for analytical/molecular workflows. For RNA/DNA applications, use nuclease-free water.
  • Polarity/dielectric: Aqueous borate buffers have high dielectric constant (~78 for pure water at 25 °C; decreases modestly with solute), supporting ionic reactions and electrophoresis.
  • Miscibility: Fully miscible with water and water-miscible solvents (e.g., methanol, acetonitrile). Note that co-solvents can shift pKa and pH; recalibrate after mixing.
  • Compatibility:
    • Electrophoresis: Commonly used as TB (Tris-borate) or TBE (Tris-borate-EDTA) for nucleic acid separations.
    • LC applications: Volatile borate is not suitable; non-volatile—avoid in MS-coupled methods. Prefer volatile buffers (ammonium formate/acetate) for LC–MS.
  • When to choose borate vs alternatives:
    • Choose borate for alkaline pH 8.2–10.2, strong complexation with cis-diols (capillary electrophoresis of carbohydrates), and stable pH under moderate heating.
    • Consider alternatives (Tris, CAPSO/CHES, carbonate) if enzyme compatibility or boron discharge limits are concerns.
Storage and Reconstitution
  • Storage conditions (item-specific): Room temperature (per Product Data). Protect from contamination; keep container tightly closed.
  • Shipping: Shipped under normal conditions (per Product Data).

Item-specific physical form (solution vs powder), concentration, and pH: Not specified for this item; refer to CoA/Spec Sheet.

General guidance (apply according to actual form):

  • If supplied as a solution:
    • Store at ambient room temperature away from direct sunlight. For long-term storage or sterile applications, prefer 2–8 °C and sterile containers; avoid microbial contamination.
    • Do not freeze unless validated—freeze–thaw can cause gas bubble formation and minor pH shifts.
    • If sterility is required, dispense through 0.22 µm filters into sterile aliquots; label with lot, pH, and date.
  • If supplied as a powder/concentrate:
    • Store tightly sealed in a dry place; hygroscopic uptake of moisture can alter composition. Reconstitute with high-purity water to the specified volume; mix until fully dissolved.
    • Adjust pH at the target temperature using standardized acid/base; verify after equilibration.

Stability checks:

  • Periodically verify pH and clarity; discard if turbidity, microbial growth, or precipitation occurs.
  • Always consult the SDS and CoA/Spec Sheet for any preservatives, sterility status, and recommended shelf life of this specific item.
Structure and Identity

This product is a ready-to-use laboratory buffer based on the boric acid/borate conjugate pair.

  • Item-specific identifiers (CAS, InChIKey, SMILES, exact composition): Not specified for this item; refer to CoA/Spec Sheet.
  • From buffer chemistry (literature, representative components):
    • Conjugate acid/base: boric acid (B(OH)3) / tetrahydroxyborate (B(OH)4−)
    • Representative identifiers (literature; for context only, not item-specific):
      • Boric acid SMILES: B(O)(O)O; InChIKey: ZOXJGFHDIHLPTG-UHFFFAOYSA-N
      • Tetrahydroxyborate anion SMILES: B(O)(O)O−
    • Principal functional motif: trigonal-planar boron center in B(OH)3; tetrahedral boron in B(OH)4−.
    • Buffering arises from Lewis acid-base equilibrium: B(OH)3 + H2O ⇌ B(OH)4− + H+ (apparent pKa ≈ 9.24 at 25 °C; literature).
  • Structural description (2D, literature):
    • Boric acid: planar BO3 core with three hydroxyl groups at ~120°.
    • Borate (B(OH)4−): tetrahedral boron bonded to four hydroxyls; engages in hydrogen bonding and complexes with cis-diols.

Notes:

  • This is a buffer system rather than a single defined small molecule. Exact salt forms (e.g., sodium/potassium borate, inclusion of Tris or additives) are not specified for this catalog item.
Synthetic Utility

While a buffer rather than a discrete reagent, borate buffer provides a controlled alkaline medium and unique complexation chemistry valuable in synthesis and analysis (literature/general):

  • Selective activation via boronate esters:
    • Reversible formation of boronate esters with cis-diols and catechols (favored at pH ≥ 8.5) enables protecting-group strategies, affinity purifications, and sensor interfaces.
  • Bioconjugation-friendly medium:
    • For NHS-ester couplings to amines, borate (pH 8.3–8.8) avoids nucleophilic buffer interference seen with primary amine buffers (e.g., Tris), improving coupling efficiency.
  • Carbohydrate chemistry:
    • Borate can template or direct reactions of polyols and stabilize transition states via diol complexation, influencing stereochemical outcomes in certain transformations.
  • Analytical derivatization:
    • Supports diazotization/azo coupling of phenols/anilines that require mildly basic media, and enhances separations of sugars by CE through transient borate complexes.

Practical tips:

  • Verify that substrates/cofactors lacking diols are used when borate complexation is undesirable; otherwise, adjust pH or switch buffers.
  • Maintain ionic strength appropriate to the reaction to balance solubility and rate; excessive ionic strength can suppress some enzyme-catalyzed steps.
  • Avoid buffers containing primary amines when acylation or isothiocyanate labeling is planned; borate is often preferred.
Target Specificity

Not applicable. This product is a chemical buffer, not a biological targeting reagent (e.g., antibody, ligand, or probe). No antigen/epitope specificity, clone, isotype, or species reactivity data apply.

Perguntas frequentes

How should this product be stored?
Store at room temperature.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.