DNA Grinding Buffer - BioReagent

Cat. No.: D1528828
Disponível para encomenda
GRAU & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Store at 2-8°C
Shipped In
Wet ice
★
Tamanho
USA
Alemanha (EU)*
Preço
Qtd
500ml
D1528828-500ml
Sob encomenda · 8–12 semanas
49,90US$
Enter a quantity for the sizes you want to add.

Visão geral

DNA Grinding Buffer is composed of Tris, NaCl, EDTA, SDS, and distilled water. It is used for the grinding treatment of samples during DNA extraction, facilitating cell lysis and nucleic acid release.

Especificações

Especificações e pureza
BioReagent
Condições de armazenamento de armazenamento
Store at 2-8°C
Enviado em
Wet ice
Este produto requer transporte de cadeia fria. Serviços terrestres e outros serviços econômicos não estão disponíveis.
Grau
BioReagent
Product Line
Produtos biológicos

Dados avançados

Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Application Protocols

No manufacturer-validated application protocols, tested applications, or recommended dilutions are provided for this item.

  • Item-specific note

    • Not specified for this item; refer to CoA/Spec Sheet for any lot-specific instructions.
  • General guidance (non-specific)

    • Follow standard DNA extraction SOPs appropriate to your sample type (plant, fungal, animal) and ensure compatibility of this buffer with the chosen downstream method. Perform small-scale pilot tests to optimize sample-to-buffer ratios and processing times.

All procedures should be validated by the end user for their specific application.

Biological Roles

This product is a laboratory buffer and has no intrinsic biological role in vivo. The following points describe the biochemical rationale for buffer components typically used in DNA grinding formulations (general literature context; exact composition of this item is not specified):

  • pH control

    • Buffers such as Tris maintain near-neutral to slightly basic pH (~7.5–8.5, literature) to minimize acid-catalyzed depurination of DNA.
  • Nuclease inhibition

    • Chelators (e.g., EDTA) sequester Mg2+/Mn2+, essential cofactors for many DNases, thereby reducing nuclease activity during homogenization.
  • Membrane/protein disruption

    • Ionic detergents (e.g., SDS, N-lauroylsarcosine) disrupt lipid bilayers and denature proteins, facilitating DNA release.
  • Polyphenol/polysaccharide management (plant tissues)

    • Polyvinylpyrrolidone (PVP) can bind polyphenols that otherwise oxidize and crosslink nucleic acids; reducing agents or sulfite salts can limit phenolic oxidation (literature practices).
  • Ionic strength effects

    • Salts (e.g., NaCl) stabilize duplex DNA and can assist in selective precipitation or phase partitioning during subsequent extraction and purification steps.

These biochemical functions collectively support the preservation of high-molecular-weight DNA during the physical stress of grinding/homogenization. Always consult the product CoA to determine which of these elements apply to this specific buffer.

Buffer Applications

This section outlines practical, laboratory-focused uses of DNA grinding buffers in nucleic acid workflows. Exact composition/pH/concentration for SKU D1528828 are not specified here; consult the CoA/Spec Sheet.

  • Typical use cases (literature/general)

    • Homogenization of plant, fungal, or animal tissues prior to DNA extraction.
    • Initial lysis medium preceding CTAB-based precipitation, organic extraction, or silica/magnetic-bead purification.
    • Stabilization of DNA during mechanical disruption and brief holding on ice.
  • Practical guidance

    • Temperature: Use chilled (2–8°C or on ice) during grinding to suppress nucleases.
    • Ratios: Common sample-to-buffer mass/volume ratios range 1:5 to 1:10 (w/v) for plant tissues (literature). Adjust based on tissue toughness and downstream capacity.
    • Clarification: Centrifuge the crude homogenate to pellet debris; decant supernatant for downstream processing.
    • Additives: If permitted by the product label, RNase A may be added when DNA-only preparations are desired; for polyphenol-rich samples, PVP supplementation is common in literature protocols.
  • Typical pH/ionic ranges (for context; not product specs)

    • pH ~7.5–8.5; NaCl from 0.1 to 1.5 M depending on protocol aims (e.g., protein precipitation vs. DNA solubility control). Detergent content varies widely (0–2% w/v).
  • Compatibility notes

    • Ensure compatibility with downstream kits (column/bind–wash–elute systems often specify allowable detergents and salt limits in the initial lysate). Preservatives in the buffer, if any, may inhibit enzymes—verify before direct enzymatic use.
Green Alternatives

Aqueous buffers are generally aligned with green chemistry principles; however, environmental impact depends on additives (detergents, chaotropes, preservatives) and waste handling.

  • Current product context

    • Composition of this item is not specified; refer to CoA/Spec Sheet for any preservatives or surfactants that may influence environmental profile.
  • Greener practice considerations (literature/general)

    • Prefer water-based buffers without hazardous preservatives (e.g., avoid sodium azide when feasible) and with biodegradable surfactants.
    • Minimize or eliminate phenol/chloroform extractions by using silica columns or magnetic beads downstream, reducing halogenated waste.
    • Use right-sized aliquots to reduce spoilage and bioburden-related disposal.
  • Comparison (general)

    • Conventional option: Phenol–chloroform extraction following lysis; excellent purity but produces toxic/halogenated waste and poses user hazards.
    • Greener alternative: Column/bead-based DNA purification using aqueous salt/ethanol systems; lower hazard profile, reduced VOC/halogenated waste, with comparable yields for many sample types.
    • Detergent choice: SDS is effective but persistent; alternatives like N-lauroylsarcosine are easier to rinse and may be less foaming; nonionic detergents (e.g., Triton X alternatives with better biodegradability) can be considered when compatible.
  • Waste management

    • Collect any detergent- or preservative-containing waste per institutional guidelines. Avoid drain disposal unless permitted. Rinse containers thoroughly before recycling if allowed.
Pharmaceutical Uses

This is a research-use-only laboratory buffer and is not intended for clinical or therapeutic applications.

  • Item-specific restriction

    • Research Use Note: For research use only (from Product Data). Not for drug, diagnostic, or in vivo use.
  • Excipients/formulation context

    • Not applicable. DNA grinding buffers are not used as pharmaceutical excipients. If buffer constituents (e.g., Tris, NaCl) appear in pharmacopeial contexts, their quality and regulatory status differ from research-grade mixtures.

For any regulated application, consult appropriate pharmacopeial monographs and use GMP-grade materials specifically qualified for that purpose.

Physical Properties

Item-specific specifications

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • pH, ionic strength, conductivity, buffer capacity: Not specified for this item; refer to CoA/Spec Sheet.
  • Density, refractive index, viscosity: Not specified for this item; refer to CoA/Spec Sheet.
  • Boiling point, melting point: Not applicable/relevant for an aqueous laboratory buffer; not specified for this item.

General/literature expectations for DNA grinding buffers (informational; not product specs)

  • Physical state: Typically a clear, colorless aqueous solution; some plant-focused formulations may appear slightly opaque if containing suspended polymer/insoluble components.
  • Typical pH range (literature): ~7.5–8.5 to preserve DNA integrity and reduce acid-mediated depurination.
  • Typical ionic components: Alkali metal salts (e.g., NaCl 0.1–1.5 M, literature ranges) to promote DNA stability or assist with protein aggregation/removal during subsequent steps.
  • Optional additives: Chelators (e.g., 1–10 mM EDTA, literature) to inhibit Mg2+-dependent nucleases; detergents (e.g., 0.1–2% w/v SDS or N-lauroylsarcosine, literature) to disrupt membranes; antioxidants/polyphenol binders (e.g., PVP, sodium sulfite, literature) for plant tissues.

Solubility profile (general)

  • Fully miscible with water by design; miscibility with organic solvents depends on detergent/polymer content. Not intended for nonaqueous media.

Important note: For exact values relevant to this specific item (pH, salt concentration, presence/absence of detergents or chelators), consult the product CoA/Spec Sheet.

Quality and Grades
  • Item-specific grade (from Product Data)

    • BioReagent grade: Intended for research and laboratory use. No medical/clinical use. Quality suitable for common molecular biology workflows, subject to the product’s specifications on the CoA.
  • What BioReagent typically implies (general explanation)

    • Sourcing and processing designed to minimize impurities that interfere with biochemical assays (e.g., nucleases, proteases, heavy particulates). For buffers used in DNA workflows, this often includes low bioburden and low nuclease activity (DNase/RNase-free status only if explicitly stated on the CoA/label).
    • UV transparency and chromatographic background are usually not defining criteria (unlike HPLC grade solvents). Instead, composition accuracy, pH control, and ionic strength consistency are key.
  • Stabilizers and preservatives

    • Not specified for this item; refer to CoA/Spec Sheet. If a preservative (e.g., sodium azide, ProClin) is present, it will be declared on the label/CoA; such additives improve shelf life but may affect enzyme-based downstream steps and require specialized disposal.
  • Release testing (context, general)

    • Typical release controls for similar buffers include pH, conductivity/ionic strength, identity by formulation check, appearance, and bioburden or nuclease tests when applicable. The exact tests for this product are not specified here; consult the CoA for definitive criteria.
Reaction and Applications

Primary application: mechanical disruption of cells/tissues while maintaining DNA integrity for subsequent purification. The buffer conditions aim to mitigate nuclease activity, solubilize membranes, and manage interfering compounds.

  • Item-specific facts

    • Intended use: DNA Grinding Buffer (research use only; see Product Data). Specific additives and concentrations are not specified for this item; refer to CoA/Spec Sheet.
  • Typical laboratory applications (literature/general)

    • Pre-lysis medium for tissue grinding with mortar and pestle, bead mill, rotor–stator, or cryogenic grinding (liquid nitrogen) prior to DNA isolation.
    • Initial extraction step for plant tissues, fungi, and some animal tissues to generate a crude lysate compatible with downstream clarification (centrifugation/filtration) and DNA capture (e.g., CTAB precipitation, silica binding, magnetic beads).
    • Nuclease inhibition via chelation (e.g., EDTA) and pH control; salt supports DNA structural stability while aiding in protein aggregation or phase partitioning during organic extraction steps.
  • Practical tips (general, not product-specific)

    • Work cold to minimize nuclease activity; pre-chill tubes and pestles.
    • Use appropriate sample-to-buffer ratios; insufficient buffer leads to localized heating and nuclease activation.
    • If polysaccharides or polyphenols are problematic (common in plants), consider adding PVP or reducing agents if compatible with the supplied buffer (only if permitted by the CoA/label).
    • Clarify lysate promptly (centrifuge 10–20 min, literature) to remove debris and proceed to DNA purification to minimize degradation.

Note: Follow the specific instructions on the item’s label/CoA when available; do not assume the presence of any particular component.

Reaction Conditions

There are no chemical reaction conditions specific to this product in the sense of synthetic transformations. The relevant “conditions” relate to sample processing during DNA extraction.

  • Item-specific

    • No manufacturer protocols provided. Composition and specific instructions are not specified for this item; refer to CoA/Spec Sheet.
  • General/literature guidance for sample processing

    • Temperature: Keep buffer and samples cold (2–8°C or on ice) during grinding to reduce nuclease activity.
    • Time: Minimize dwell time between homogenization and downstream stabilization/clarification to preserve DNA integrity.
    • Equipment: Mortar and pestle (often pre-chilled), bead mill, or rotor–stator homogenizer. For hard/woody tissues, cryogenic grinding with liquid nitrogen is common.
    • Centrifugation: Clarify lysates (e.g., 10–20 min at 10,000–20,000 × g, literature) before proceeding to DNA capture.
    • Compatibility: Verify detergent/salt tolerance of downstream binding matrices or enzymes.

These are general best practices, not product-specific specifications. Always defer to the product label/CoA and institutional SOPs.

Safety and Handling

Authoritative safety information must be taken from the SDS for SKU D1528828.

  • Item-specific hazard information

    • Signal word: Not specified for this item; refer to SDS.
    • H-statements: Not specified for this item; refer to SDS.
    • GHS classification and pictograms: Not specified for this item; refer to SDS.
  • General handling guidance for DNA grinding buffers (literature/general)

    • PPE: Wear lab coat, safety glasses, and appropriate gloves. If the buffer contains detergents (common in lysis/grinding buffers), use nitrile gloves and avoid generating aerosols; work in a fume hood if splashing or aerosolization is possible.
    • Incompatibilities: Avoid contact with strong oxidizers and acids/bases that could alter buffer pH or hydrolyze components; keep away from reactive metals if chelators are present.
    • First aid overview: In case of skin/eye contact, rinse with water for at least 15 minutes. If inhaled (aerosols), move to fresh air. If ingested, rinse mouth and seek medical attention. Always follow institutional SOPs.
    • Spill response: For small spills, absorb with inert material, collect for disposal; wash area with water. For large spills, contain and consult EHS.
    • Special risks: Some grinding buffers include SDS or similar surfactants that can cause skin/eye irritation; chelators can mobilize metals from surfaces; high-salt buffers may corrode certain metals.
  • Storage conditions (from Product Data)

    • Store at 2–8°C. Avoid microbial contamination; keep container tightly closed. Do not freeze unless the label/CoA explicitly permits.
Solvent Selection

This product is an aqueous buffer intended to be used as supplied.

  • Item-specific note

    • Formulation medium: Water (implied by buffer designation). Exact composition, pH, and salt/detergent content are not specified for this item; refer to CoA/Spec Sheet.
  • General guidance for choosing/using grinding buffers (literature)

    • Polarity and dielectric: Highly polar, high dielectric medium (water-based), supporting ionic strength needed for DNA stability and protein solubilization/precipitation.
    • Miscibility: Fully miscible with water; miscibility with alcohols (ethanol/isopropanol) is typically complete, but mixing may change effective buffer strength and can precipitate proteins or nucleic acids.
    • Compatibility: Suitable for tissue homogenization prior to DNA isolation. If phenol–chloroform extraction follows, ensure buffer pH and salt content are compatible with the extraction step. For silica-column workflows, high-salt chaotrope steps usually occur downstream; this grinding buffer provides the initial lysate environment.
    • Temperature use: Often used chilled (on ice or 2–8°C) to slow nuclease activity during grinding/homogenization.
  • When to choose alternatives

    • For polysaccharide/polyphenol-rich plant tissues, formulations with PVP and antioxidants can improve DNA quality (literature). For high-fat/membrane-rich samples, stronger detergents may be beneficial. If downstream enzyme reactions are immediate, choose buffers free of preservatives/detergents that inhibit polymerases.
Storage and Reconstitution
  • Item-specific storage conditions (from Product Data)

    • Store at 2–8°C. Shipped on wet ice. Research use only.
  • Reconstitution/use

    • Physical form, concentration, and appearance are not specified for this item; refer to CoA/Spec Sheet. If supplied as a ready-to-use solution, employ directly without dilution. If supplied as a concentrate or dry mix, reconstitute/dilute with nuclease-free water per the label instructions.
  • Handling practices (general)

    • Mix gently before use to ensure homogeneity; avoid introducing bubbles/foam if detergents are present.
    • To minimize contamination and extend shelf life, work aseptically, use clean nuclease-free tools, and consider aliquoting into sterile containers to avoid repeated freeze–thaw or repeated warming.
    • Do not freeze unless explicitly permitted on the label/CoA; some buffers precipitate or phase-separate upon freezing due to salts/detergents.
  • Stability

    • Expiration date, pH, and any preservative content are not specified for this item; consult the CoA/Spec Sheet. Discard if turbidity, precipitate (not reversible by gentle warming), color change, or microbial growth is observed.

Always defer to the product label and lot-specific CoA for definitive instructions.

Structure and Identity

Concise overview: This product is a formulated aqueous buffer intended for mechanical disruption (grinding/homogenization) of biological samples prior to DNA isolation. It is a mixture, not a single defined compound.

  • Item-specific facts (from Product Data)

    • Product name: DNA Grinding Buffer (SKU: D1528828)
    • Grade: BioReagent
    • CAS: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES / InChI / InChIKey: Not applicable to a multi-component mixture; not specified for this item.
  • General/literature description of typical composition (for context; exact composition of this item is not specified)

    • DNA grinding buffers commonly include an aqueous base buffered near neutral to slightly basic pH (e.g., Tris), chelators (e.g., EDTA) to inhibit nucleases, salts (e.g., NaCl) to stabilize DNA and modulate protein solubility, and optionally detergents (e.g., SDS, Sarkosyl) or polymers (e.g., PVP for polyphenol-rich plants). The exact components and concentrations vary by formulation.
  • Structural features (general, literature)

    • As an aqueous mixture, the “structure” consists of solvated ions and small molecules in water; there is no single 2D/3D molecular structure. Functional groups present depend on the buffer constituents (typical: amines from Tris, carboxylates/borates/chelates, sulfate groups from detergents).
Synthetic Utility

Not typically applicable. DNA Grinding Buffer is a prepared aqueous mixture designed for biomolecular sample preparation, not for use as a synthetic reagent or building block.

  • General note (literature)
    • While high-salt or detergent-containing aqueous media can influence biomolecule extraction or protein denaturation, they are not used as reagents in organic synthesis or materials construction.

Users interested in chemical synthesis should refer instead to dedicated reagents and solvents appropriate to their reaction class.

Target Specificity

Not applicable. This product is a buffer solution and is not an antibody, enzyme, probe, or affinity reagent with biological target specificity.

  • Item-specific data
    • No antigen/epitope, clone, isotype, or species reactivity information applies.

Precisa de ajuda para escolher o grau?

O nosso guia de seleção de graus abrange pureza, estado do estabilizador e adequação à aplicação para todas as variantes do nosso catálogo.

Ver o guia de graus BioReagent →

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.