Laboratory Protocols & SOPs Library

NZCYM Agar (Powder)

Directions per Liter:

Dissolve 37 grams in 800-900ml of ddH2O stirring gently with heating until completely solubilized. Adjust pH of the medium to the desired level. Add additional water to bring the solution to 1L. Dispense into appropriate containers, loosen caps and autoclave for 15 minutes at 121ºC (15psi).


Component g/liter
Agar 15
Casamino Acidse 1
Magnesium Sulfate 0.98
Sodium Chloride 5
NZ Amine 10
Yeast Extract 5
Total: 36.98g/Liter
500g makes 13.5 liters


Storage and Stability:

Store powdered media at RT. Opened bottles should be capped tightly and kept in a dark, low humidity environment. Prepared media should be kept at 4°C and used within a short period of time.

Categories: Laboratory Protocols & SOPs Library

Da — when not otherwise indicated, molecular weight units are daltons.   Mw — weight-average molecular weight.   Mn — number-average molecular weight.

Products are supplied for research and development use only. Not for use in humans, animals, diagnosis, or therapy.

Cite this article

Aladdin Scientific. "NZCYM Agar (Powder)" Aladdin Knowledge Base, updated 09/06/2025. https://www.aladdinsci.com/us_pt/faqs/nzcym-agar-powder-en.html
Was this article helpful? Yes No 6 out 12 found this helpful

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.