Determine the necessary mass, volume, or concentration for preparing a solution.
Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Data | Item |
|---|---|---|---|
| Certificate of Analysis | Jul 17, 2026 | A1508998 | |
| Certificate of Analysis | Mar 16, 2026 | A1508998 |
H315:Causes skin irritation
P261:Avoid breathing dust/fume/gas/mist/vapors/spray.
P264:Wash hands [and …] thoroughly after handling.
P271:Use only outdoors or in a well-ventilated area.
P272:Contaminated work clothing should not be allowed out of the workplace.
P280:Wear protective gloves/protective clothing/eye protection/face protection.
P284:[In case of inadequate ventilation] Wear respiratory protection.
P342:If experiencing respiratory symptoms:
P302+P352:IF ON SKIN: wash with plenty of water.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P333+P313:IF SKIN irritation or rash occurs: Get medical advice/attention.
P362+P364:Take off contaminated clothing and wash it before reuse.
P405:Store locked up.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P501:Dispose of contents/container to an approved waste disposal plant.
The following are typical laboratory protocols leveraging a 10% gum arabic stock. Adjust to your samples, antibodies, and imaging setup.
Blocking Step (slides/sections)
Notes
Gum arabic is a plant-derived arabinogalactan–protein (AGP) exudate with roles and behaviors relevant to biochemistry and colloid science.
Note: This section provides general biological background; it does not imply therapeutic or clinical utility. For laboratory use only, as indicated by the product’s Research Use Only designation.
Gum arabic is commonly used as a blocking and stabilizing additive in aqueous buffers for IF/IHC and microscopy.
Item-specific buffer specifications (pH, conductivity, preservatives) are not provided for this product; refer to the CoA/Spec Sheet for details if required.
Gum arabic is itself a renewable, plant-derived biopolymer with benign aquatic fate relative to many synthetic stabilizers. Selection among blocking/stabilizing agents can nevertheless consider sustainability, sourcing, and performance tradeoffs.
Comparison (general literature/practice):
Gum Arabic (this item):
BSA/Casein (animal proteins):
Fish gelatin:
Synthetic polymer blockers (e.g., PVP, PEG-based blockers):
Sustainability tips:
Context for formulation science (general literature): Gum arabic (also known as acacia) is widely used as an excipient—binder, emulsifier, suspending agent, and encapsulation matrix—in nonclinical and clinical product development. Pharmacopeial monographs exist for acacia/gum arabic in several jurisdictions (e.g., USP–NF, Ph. Eur.), defining tests for identity, purity, and performance for excipient-grade material.
Relevance to this product:
Formulation considerations (literature/guidance):
Note: The above reflects general excipient knowledge and does not imply suitability of this specific item for pharmaceutical manufacturing.
This product is a 10% (w/v) aqueous solution of gum arabic. Item-specific physical constants are not provided.
Practical note: For quantitative work (e.g., rheology or particle stabilization studies), verify pH, viscosity, and bioburden of the supplied lot on receipt as these parameters impact performance in IHC/IF blocking and microscopy workflows.
This item is designated: Suitable for Immunofluorescence (IF), BioReagent, for Microscopy, Suitable for Immunohistochemistry (IHC).
What these designations generally imply (general guidance):
Item-specific specifications (this listing):
Practical quality notes:
Primary applications are in bioanalytical and imaging workflows rather than classical synthetic reactions.
Practical tips:
Given its role as a blocking/stabilizing additive rather than a stoichiometric reactant, the most relevant “conditions” are those for sample preparation and imaging workflows.
IF/IHC blocking (general literature guidance):
Nanoparticle stabilization (literature):
Coating/film formation (slides or plasticware):
Expected outcomes (typical, literature): Reduced nonspecific binding/background in IF/IHC; improved dispersion stability for colloids. Always validate conditions with controls for your specific system.
General laboratory safety (applicable to gum arabic solutions; literature/practice):
Always consult the product SDS for the specific lot before use.
This product is not a solvent; it is a 10% (w/v) aqueous biopolymer solution intended as an additive in biological/imaging workflows. Nevertheless, solvent compatibility is relevant for formulation and use.
When to choose gum arabic vs alternatives:
Handling and preservation (general best practices):
Reconstitution/dilution:
Stability/shelf life:
Gum Arabic (acacia gum) is a complex, natural, plant-derived polysaccharide-protein exudate supplied here as an aqueous solution at 10% (w/v). It is a heterogeneous arabinogalactan–protein (AGP) biopolymer rather than a single defined small molecule.
Notes: As a natural product mixture and aqueous preparation, exact composition and macromolecular parameters vary by source and lot; consult the CoA for item-specific identity tests.
Gum arabic is not a typical small-molecule building block. Its main utility in synthetic contexts is as a green auxiliary, matrix, or stabilizer.
Limitations:
If your aim is classical small-molecule synthesis, consider this product primarily as a formulation/processing aid rather than a reagent. For matrix-assisted applications (e.g., colloid-catalysis), preliminary optimization of concentration, ionic strength, and pH is recommended.
Not applicable. This product is not an antibody or affinity reagent and has no antigen/epitope specificity. In IF/IHC workflows it serves as a nonspecific blocking/stabilizing additive to reduce undesired interactions.
O nosso guia de seleção de graus abrange pureza, estado do estabilizador e adequação à aplicação para todas as variantes do nosso catálogo.
Ver o guia de graus BioReagent → Ver o guia de graus for Microscopy → Ver o guia de graus Suitable for Immunohistochemistry(IHC) → Ver o guia de graus Suitable for Immunofluorescence(IF) →