Lactobacillus Broth Medium - BioReagent

Cat. No.: L1528402
Disponível para encomenda
GRAU & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Tamanho
USA
Alemanha (EU)*
Preço
Qtd
250g
L1528402-250g
Sob encomenda · 8–12 semanas
119,90US$
Enter a quantity for the sizes you want to add.

Visão geral

Lactobacillus Broth Medium is a non-selective liquid enrichment medium. Each liter of the formula contains: Photolyzed peptone 15.0 g (provides nitrogen source, carbon source, and growth factors), tomato extract powder 2.5 g (provides specific growth-promoting factors), glucose 10.0 g (primary carbon and energy source), dipotassium hydrogen phosphate 2.0 g (maintains pH buffering system), and Tween 80 1.0 g (emulsifier and fatty acid source, promotes lactobacillus growth). Final pH adjusted to 6.8 ± 0.2 (25°C). Preparation method: Weigh 30.5 g of this product in 1 L of distilled or deionized water (the volume may be scaled up or down proportionally), heat gently with stirring until completely dissolved, dispense into suitable containers, autoclave at 121°C for 15 minutes, and set aside for use. If inhibitors need to be added after sterilization, they should be added when cooled to approximately 50°C and mixed thoroughly.

Especificações

Especificações e pureza
BioReagent
Condições de armazenamento de armazenamento
Room temperature
Enviado em
Normal
Grau
BioReagent
Product Line
Produtos biológicos

Dados avançados

Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Application Protocols

Item-specific, validated protocols are not provided. The following is general, literature-based guidance for preparing and using a Lactobacillus-supportive broth:

  • Preparation (literature/general):
    • Accurately weigh the manufacturer-recommended mass of dehydrated medium per liter of purified water (value not specified for this item; consult CoA/label).
    • Warm and stir to dissolve completely; avoid overheating to prevent sugar degradation.
    • Dispense into suitable vessels with headspace; autoclave at 121 °C for 15 minutes. Allow to cool to 45–55 °C before adding any heat-labile supplements (e.g., antibiotics) via sterile filtration.
  • Inoculation and incubation:
    • Inoculate aseptically with a standardized volume or cell density.
    • Incubate at 30–37 °C under microaerophilic/anaerobic conditions as appropriate for the strain; monitor turbidity (OD600) or plate counts to assess growth.
  • Quality checks:
    • Confirm pH of cooled, sterilized medium; inspect for clarity and absence of precipitate.
    • Perform growth promotion testing with a known Lactobacillus control strain.
  • Disposal:
    • Autoclave spent media and cultures prior to disposal, following institutional biosafety procedures.

These steps are guidance only and are not specifications for this SKU.

Biological Roles

As a culture medium, this product does not have intrinsic biological roles; it provides an ex vivo chemical environment that supports microbial metabolism. For Lactobacillus spp. (literature/general):

  • Carbon and energy: Readily metabolizable carbohydrates (e.g., glucose) fuel homolactic or heterolactic fermentation, yielding lactic acid (and sometimes CO2, ethanol, acetate) depending on species/conditions.
  • Nitrogen and growth factors: Peptones/yeast extracts supply amino acids, peptides, nucleotides, and vitamins (e.g., B vitamins) essential for growth of fastidious lactic acid bacteria.
  • Buffering and minerals: Phosphates/citrate and mineral salts stabilize pH and supply cofactors for enzymatic activity.
  • Redox and oxygen: Many Lactobacillus are aerotolerant anaerobes or microaerophiles; medium composition and incubation atmosphere modulate redox balance and growth outcomes.

Application relevance:

  • The medium facilitates reproducible cultivation for studying carbohydrate utilization, acid tolerance responses, and production of metabolites (e.g., lactic acid), enabling biochemical and genomic analyses. Any observed biological effects arise from the organisms growing in the medium, not from the medium itself.
Buffer Applications

Not typically applicable. While the prepared broth possesses intrinsic buffering capacity to support microbial growth, it is not used as a defined buffer system for analytical chemistry or biochemistry workflows. For pH-controlled experiments, employ dedicated buffer systems (e.g., phosphate, MOPS) and consult the medium’s actual pH (refer to CoA) to ensure compatibility.

Green Alternatives

This is an aqueous microbiological medium; typical solvent substitution frameworks (e.g., replacing THF with 2-MeTHF) are not applicable. Sustainability considerations for culture media focus on:

  • Source materials: When possible, select media composed of responsibly sourced peptones/yeast derivatives (supplier documentation required).
  • Waste minimization: Prepare only the volume needed; use smaller batch autoclaving to reduce unused sterile media that later must be discarded.
  • Energy efficiency: Optimize autoclave loads and cycles; use validated sterilization parameters to avoid reprocessing.
  • Reusables vs disposables: Favor reusable glassware when biosafety and workflow allow; if disposables are necessary, segregate waste streams to enable appropriate treatment.
  • Transport and storage: Room-temperature stability (as specified for this item) reduces cold-chain energy demands relative to refrigerated products.

Trade-offs:

  • Complex media often rely on animal- or yeast-derived components; switching to plant-based or chemically defined alternatives may reduce variability and improve sustainability but can reduce growth robustness for some strains. Validate growth performance when changing media type.
Pharmaceutical Uses

No therapeutic claims. In research and industrial quality control contexts (literature/general):

  • Microbiological QC: Lactobacillus-supportive media are used in environmental monitoring, raw material/finished product testing, and probiotic lot verification for enumeration and identification of lactic acid bacteria.
  • Process development: Used to propagate Lactobacillus starter cultures for fermentation studies relevant to food, nutraceutical, or microbiome research.
  • Non-pharmacopeial status: This listing does not state USP/EP/JP compliance. If pharmacopeial conformity is required (e.g., for culture media referenced in compendial tests), verify against the relevant monograph and perform growth promotion testing with compendial strains.

Important: This BioReagent-grade product is for research use only, not for clinical diagnostics, therapeutic use, or human/animal consumption. Confirm regulatory suitability and perform in-house qualification when used in GMP-adjacent settings.

Physical Properties
  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Form: Typically supplied as dehydrated powder or ready-to-use liquid (literature/general); specific form for this SKU is not specified.
  • Solubility: Designed to be water-soluble/aqueous (general for media). Exact solubility and clarity upon dissolution: Not specified for this item.
  • pH (prepared medium): Not specified for this item; refer to CoA/Spec Sheet. Typical Lactobacillus broths (e.g., MRS-type, literature) target pH ~6.2 at 25 °C after sterilization.
  • Buffer capacity/osmolality: Not specified for this item.
  • Density, refractive index, viscosity: Not applicable/not specified for dehydrated mixtures; for prepared broth these are rarely specified; refer to CoA if provided.
  • Melting/boiling point: Not applicable to complex dehydrated media; prepared broth is aqueous and follows water’s phase behavior.

Notes:

  • Because this is a complex mixture, conventional single-compound physicochemical parameters (BP, MP, logP, exact pKa) do not apply. Any working properties (e.g., pH range, clarity) should be confirmed from the item’s Certificate of Analysis (CoA) and by in-lab QC after reconstitution and sterilization.
Quality and Grades
  • Item-specific grade: BioReagent (as provided). This denotes suitability for laboratory research applications, including microbiology workflows. It implies controlled raw materials and manufacturing intended for reproducibility in research settings. It is not a clinical/diagnostic grade unless explicitly stated otherwise.
  • Typical QC attributes for Lactobacillus media (literature/general; not item-specific):
    • pH of prepared medium (after sterilization) within a defined range (often near 6.2 for Lactobacillus broths such as MRS-type).
    • Growth promotion testing with representative Lactobacillus strains (e.g., L. plantarum, L. casei) to verify performance.
    • Sterility testing of dehydrated lots; clarity/turbidity acceptance post-autoclave.
    • Low batch-to-batch variability in nutrient profile.
  • What this means in practice:
    • BioReagent grade supports research repeatability but does not imply pharmaceutical GMP manufacture or clinical validation.
    • For chromatography, elemental analysis, or low-UV background requirements, specialized grades exist; this product is configured for biological culture performance rather than spectroscopic purity.
  • Stabilizers/additives: Not specified for this item; refer to CoA/Spec Sheet.
  • Verification: For regulated workflows, confirm lot-specific parameters (pH, growth promotion, moisture content) from the CoA and perform in-house qualification as required.
Reaction and Applications

This product is intended for cultivation, maintenance, and enumeration of Lactobacillus spp. and other lactic acid bacteria in research settings.

Use cases (literature/general; not item-specific):

  • Enrichment and routine cultivation of Lactobacillus from pure cultures or complex samples (e.g., fermented foods, probiotic materials, microbiome isolates).
  • Viable cell counting by serial dilution and plating onto appropriate agar formulation derived from the broth (if available), or MPN (most probable number) assays in liquid.
  • Physiological studies (e.g., carbohydrate utilization, acid tolerance, bile salt tolerance) and biomass production for downstream biochemical assays.
  • Starter culture propagation prior to fermentation trials.

Practical tips (general):

  • Water quality matters: use deionized/distilled water meeting microbiology-grade standards; avoid residual chlorine/chloramine.
  • Dissolution: bring to full dissolution with gentle heating; avoid excessive boiling that may caramelize sugars.
  • Sterilization: autoclave in suitable containers with loose caps; allow pressure to vent; cool before tightening.
  • Supplements: add selective agents, buffers, or reducing agents (if required) after sterilization by aseptic technique. Some Lactobacillus strains benefit from microaerophilic or anaerobic conditions; consider gas packs or CO2 incubators as appropriate.
  • Incubation: many Lactobacillus grow well at 30–37 °C; specific temperature and atmosphere depend on species/strain (literature guidance).

Note: Exact composition and performance specifications are not provided for this item. Validate medium performance with control strains relevant to your study.

Reaction Conditions

In the context of microbiology, “reaction conditions” translate to culture preparation and incubation parameters. Item-specific conditions are not provided; consult the CoA/Spec Sheet. General literature guidance for Lactobacillus broth preparation and use:

  • Reconstitution (typical, literature example for Lactobacillus/MRS-type broths): dissolve the specified grams of dehydrated medium per liter of purified water with gentle heat; adjust volume; sterilize by autoclaving at 121 °C for 15 minutes; cool to 45–55 °C before adding heat-labile supplements.
  • Atmosphere: Many Lactobacillus strains prefer microaerophilic or anaerobic conditions; use anaerobic jars, gas packs, or CO2 incubators as required by the strain.
  • Temperature and time: Common incubation ranges are 30–37 °C for 18–48 hours, adjusted per strain and experimental goals.
  • pH control: Initial pH often near 6.2 (literature for Lactobacillus broths); lactic acid production lowers pH over time. For prolonged cultivation, consider buffering or pH-controlled fermentations.
  • Inoculum: Use fresh cultures; standardize inoculum density (e.g., OD600 or CFU-based) for reproducibility.

Note: These are literature/general conditions and not specifications for this item. Validate with your strains and equipment.

Safety and Handling
  • GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to the SDS for authoritative information.
  • General laboratory safety (applicable to culture media):
    • Wear appropriate PPE: lab coat, gloves, and safety glasses.
    • Avoid inhalation of dust from dehydrated media; handle powders in a well-ventilated area or fume hood to minimize dust exposure.
    • Prevent contamination: use aseptic technique when preparing and dispensing media.
    • Sterilize by autoclaving in suitable, vented containers; avoid overfilling to prevent boil-over.
  • Biological safety:
    • Although the product itself is non-viable, it is intended to cultivate live microorganisms. Treat all used media, cultures, and disposables as biohazardous. Decontaminate by autoclaving (e.g., 121 °C, 15–20 min) or appropriate chemical disinfectants before disposal, following institutional biosafety procedures.
  • Incompatibilities and cautions:
    • Avoid contact with strong oxidizers until reconstituted/used; keep dry until use to prevent clumping and microbial contamination.
    • For heat-sensitive supplements (e.g., antibiotics), sterilize base medium first, cool to ~45–55 °C, then aseptically add filter-sterilized supplements.
  • First aid (general):
    • Inhalation of dust: move to fresh air; seek medical attention if irritation persists.
    • Skin/eye contact: rinse with water; remove contaminated clothing; seek medical advice if irritation persists.
  • Always consult the SDS for this SKU prior to use.
Solvent Selection

Not typically applicable. Lactobacillus Broth Medium is designed to be dissolved in water to make an aqueous culture medium. Organic solvent selection is not relevant. See Reaction & Applications and Application Protocols for guidance on preparation and use in microbiology.

Storage and Reconstitution
  • Storage conditions (item-specific): Room temperature (as provided). Keep container tightly closed in a dry place. Protect from moisture and microbial contamination.
  • Shipped: Normal (as provided).
  • Reconstitution (not item-specific; literature/general guidance):
    • Dissolve the manufacturer-recommended mass per liter of purified water (value not specified for this item; refer to CoA/label) with gentle heating and stirring until fully dissolved.
    • Adjust volume; do not adjust pH unless instructed by the manufacturer.
    • Sterilize by autoclaving at 121 °C for 15 minutes. Cool to 45–55 °C before adding heat-labile supplements via sterile filtration.
  • Prepared medium storage (literature/general):
    • Store sterile broth at 2–8 °C, protected from light where applicable; use within 2–4 weeks for best performance. Warm to room temperature before use. Inspect for turbidity/contamination before inoculation.
  • Freeze–thaw: Not applicable to dehydrated media. Avoid freezing prepared broth unless protocol dictates; repeated freeze–thaw can affect performance.
  • Research Use Note: For research use only.

For any lot-specific details (recommended g/L, final pH, growth promotion), consult the CoA/Spec Sheet for SKU L1528402.

Structure and Identity

This product is a complex microbiological culture medium formulated to support the growth of Lactobacillus spp. and related lactic acid bacteria. It is a mixture of organic and inorganic nutrients (e.g., peptides, amino acids, carbohydrates, minerals, and growth factors) rather than a single defined chemical compound.

  • Item-specific identifiers:
    • CAS: Not applicable for complex media mixtures.
    • Molecular formula: Not applicable for mixtures.
    • Molecular weight: Not applicable for mixtures.
    • SMILES, InChI, InChIKey: Not applicable for mixtures.
  • SKU: L1528402
  • Grade: BioReagent
  • Category: Life Science research media

2D structural description (general):

  • As a dehydrated or ready-to-use broth medium (form not specified), the product comprises a heterogeneous blend of components such as peptones/tryptone, yeast derivatives, carbohydrates (e.g., glucose), buffering salts, and potentially selective agents (composition not specified for this item). No single molecular structure represents the product; instead, it is an aggregate of macromolecular and small-molecule nutrients designed to create an optimal chemical environment (carbon/energy sources, nitrogen sources, vitamins, minerals, buffer capacity) for Lactobacillus cultivation.

Important note: Exact composition and component identities/concentrations are not specified for this item; refer to the product CoA/Specification Sheet for definitive details.

Synthetic Utility

Not applicable. Lactobacillus Broth Medium is not a chemical building block or reagent for synthetic organic/organometallic chemistry. It serves as a nutrient matrix for microbial cultivation. For synthetic or biocatalytic applications involving Lactobacillus enzymes or whole cells, this medium may be used to grow biomass prior to harvesting cells/enzymes, but the medium itself is not a reactant.

Target Specificity

This section is primarily applicable to antibodies and affinity reagents. For a culture medium, there is no antigen/epitope specificity. Generally, Lactobacillus Broth Medium is formulated to support the growth of Lactobacillus spp. and related lactic acid bacteria (literature/general), but exact selectivity relative to other microbes depends on the specific formulation and incubation conditions, which are not specified for this item.

Perguntas frequentes

How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.

Precisa de ajuda para escolher o grau?

O nosso guia de seleção de graus abrange pureza, estado do estabilizador e adequação à aplicação para todas as variantes do nosso catálogo.

Ver o guia de graus BioReagent →

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.