TCPZ , CAS No.890148-68-2

CAS: 890148-68-2 Cat. No.: T434320 Fórmula: C57H36N6 PubChem CID: 57872440
Disponível para encomenda
Synonyms
2,4,6-Tris(3-(carbazol-9-yl)phenyl)triazine
Storage
Room temperature
★
Tamanho
USA
Alemanha (EU)*
Preço
Qtd
500mg
T434320-500mg
Sob encomenda · 8–12 semanas

672,90US$

785,90US$
Gravar 113,00 US$ (14.38%)
Enter a quantity for the sizes you want to add.

Visão geral

Application

Host material containing a triazine core and three phenylcarbazole arms for phosphorescent organic light-emitting diodes.

Especificações

Sinónimos
2,4,6-Tris(3-(carbazol-9-yl)phenyl)triazine
Condições de armazenamento de armazenamento
Room temperature
Nomes e identificadores
SMILES
C1=CC=C2C(=C1)C3=CC=CC=C3N2C4=CC=CC(=C4)C5=NC(=NC(=N5)C6=CC(=CC=C6)N7C8=CC=CC=C8C9=CC=CC=C97)C1=CC(=CC=C1)N1C2=CC=CC=C2C2=CC=CC=C21
IUPAC Name
9-[3-[4,6-bis(3-carbazol-9-ylphenyl)-1,3,5-triazin-2-yl]phenyl]carbazole
InChIKey
KOUVXIWGXJSZHF-UHFFFAOYSA-N
InChI
1S/C57H36N6/c1-7-28-49-43(22-1)44-23-2-8-29-50(44)61(49)40-19-13-16-37(34-40)55-58-56(38-17-14-20-41(35-38)62-51-30-9-3-24-45(51)46-25-4-10-31-52(46)62)60-57(59-55)39-18-15-21-42(36-39)63-53-32-11-5-26-47(53)48-27-6-12-33-54(48)63/h1-36H
SMILES isoméricas
C1=CC=C2C(=C1)C3=CC=CC=C3N2C4=CC=CC(=C4)C5=NC(=NC(=N5)C6=CC(=CC=C6)N7C8=CC=CC=C8C9=CC=CC=C97)C1=CC(=CC=C1)N1C2=CC=CC=C2C2=CC=CC=C21
PubChem CID
57872440

Dados avançados

Estrutura 3D
Modelo de Estrutura Química Interativa





Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Application Protocols

No tested applications or protocols are provided in the Product Data for TCPZ.

  • Item-specific validated applications

    • Not specified; refer to CoA/Spec Sheet. If you require application notes, contact technical support with SKU T434320 and your intended use.
  • General protocol considerations for materials use (non-item-specific)

    • Solution processing: prepare at known solids loading; filter (0.2 µm) before coating; control humidity and temperature for reproducibility.
    • Thermal processing: establish safe bake/anneal windows by DSC/TGA; avoid exceeding decomposition onset.
    • Purification before use: recrystallization or column chromatography as appropriate; confirm purity by NMR/LC/GC.

These are illustrative only and not specific to TCPZ without structural confirmation.

Biological Roles

This product is listed for materials science; no biological function, target, or pathway information is provided. It is supplied strictly for research use.

  • Item-specific biological data

    • Not specified for this item; refer to literature only after confirming the chemical structure from the CoA.
  • General guidance

    • If you intend to use the compound in bio-adjacent research (e.g., as a probe or surface modifier), establish biocompatibility independently: cytotoxicity screens, endotoxin testing, and purity verification. No such data are supplied here.
  • Compliance note

    • This product is labeled: For research use only. It is not intended for diagnostic, therapeutic, or clinical use.
Buffer Applications

Not typically applicable. TCPZ is categorized under materials science, and no acid/base or zwitterionic buffering properties are provided.

  • Item-specific buffer properties

    • pKa values, buffer ranges, and buffer recipes: Not specified for this item; refer to CoA/Spec Sheet.
  • If solution preparation is required for materials processing (general)

    • Use appropriate organic solvents or solvent blends rather than aqueous buffer systems, unless the structure indicates water solubility. Verify stability and solubility empirically.
Green Alternatives

Without a known structure, greener-alternative guidance focuses on solvent and process choices commonly influencing the sustainability profile of materials synthesis and processing.

  • Process-level choices (general)

    • Prefer bio-based solvents (2-MeTHF, CPME, EtOAc, MeTHF/EtOAc blends) over chlorinated solvents where feasible.
    • Minimize DMF/DMAc/NMP usage due to regulatory and toxicity concerns; if needed, implement closed-loop recovery.
    • Use ambient-pressure and room-temperature processes when possible to reduce energy consumption; confirm thermal windows via TGA/DSC.
  • Comparison (general considerations)

    • THF vs 2-MeTHF: similar polarity; 2-MeTHF offers better hydrophobicity and often improved phase separation; lower peroxide risk than diethyl ether, but still monitor.
    • DCM vs EtOAc/CPME: EtOAc/CPME are less hazardous and often suitable for extractions and coatings; DCM offers faster evaporation but higher environmental/health burden.
  • Materials lifecycle (general)

    • Assess solvent recovery and solid waste minimization. For device fabrication, optimize coating to reduce overspray/spin-off. Consider greener antisolvents for crystallization.
  • Note on TCPZ

    • Item-specific greener substitutions or stabilizers cannot be recommended without structural information. Consult the CoA/SDS and your EHS team for a tailored green chemistry assessment.
Pharmaceutical Uses

No pharmacopeial status, excipient role, or formulation use is provided. The product is intended for research use only and is listed under materials science.

  • Item-specific pharma/excipient information

    • Not specified for this item; refer to CoA/Spec Sheet.
  • General note

    • Do not use for human or veterinary applications. If considering as a process chemical in pharmaceutical R&D, independently qualify purity, residual solvents, and extractables/leachables. No such qualifications are included with this listing unless explicitly stated on the CoA.
Physical Properties

Item-specific physical constants are not provided in the Product Data. Do not infer specifications from general literature.

  • Item-specific data (from Product Data)

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Melting/Freezing point: Not specified for this item; refer to CoA/Spec Sheet.
    • Boiling point: Not specified for this item; refer to CoA/Spec Sheet.
    • Density: Not specified for this item; refer to CoA/Spec Sheet.
    • Refractive index: Not specified for this item; refer to CoA/Spec Sheet.
    • Solubility profile: Not specified for this item; refer to CoA/Spec Sheet.
    • LogP / pKa: Not specified for this item; refer to CoA/Spec Sheet.
  • Practical characterization guidance (general/literature-style methods)

    • If TCPZ is a solid, determine mp by DSC and capillary methods; for liquids, capture nD at 20 or 25 °C and density by pycnometry.
    • Assess thermal stability by TGA/DSC to identify onset of mass loss, glass transition (Tg), or exotherms—especially relevant for materials science applications.
    • Establish a solubility map (water, alcohols, acetone, acetonitrile, EtOAc, DCM, toluene, DMF, DMSO, 2-MeTHF, CPME). Use 10 mg/mL screening at 23 °C.
    • For electronic materials, record UV–Vis and photoluminescence spectra (if chromophoric) and cyclic voltammetry (HOMO/LUMO estimates) as needed.
  • Important note

    • Treat any property not explicitly stated on the Aladdin CoA/SDS as non-specified for this item.
Quality and Grades

Grade and purity are not stated in the Product Data for this item.

  • Item-specific status (Product Data)

    • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
    • Stabilizers/Inhibitors: Not specified for this item; refer to CoA/Spec Sheet.
  • How to interpret grades (general guidance)

    • Analytical/AR grade: Suitable for most analytical work, typical low inorganic/organic impurities.
    • HPLC/LC-MS grade: Low UV background and particulates; vital for trace analysis and photophysical measurements.
    • Electronic/semiconductor grade: Tight control of metal ions/particles; relevant for optoelectronics and thin-film applications.
    • Anhydrous grade: Controlled water content; essential for air-/moisture-sensitive chemistry or materials deposition.
  • Practical quality control recommendations (general)

    • Verify purity by quantitative 1H NMR or GC/LC with an internal standard. For materials use, evaluate residual solvent, ash content, and metallic impurities (ICP-MS) if device performance is sensitive.
    • If polymerization or oxidative degradation is possible, check inhibitor level or add a stabilizer consistent with your application.
  • Documentation

    • Use the Aladdin CoA for lot-specific purity, assay basis, residual solvents, and water content. If a specific limit (e.g., metals, UV cutoff) is required for your workflow, request a spec clarification before placing the order.
Reaction and Applications

Manufacturer-supplied application text is not provided for this item. The listing category suggests potential use in materials science contexts; however, no reaction class or functional profile is specified.

  • Item-specific applications

    • Not specified for this item; refer to CoA/Spec Sheet or contact technical support with the SKU and lot number for use-cases we have validated.
  • General materials-science use-cases (non-item-specific examples)

    • Small molecules in this category may serve as monomers, dopants, charge-transport materials, ligands, crosslinkers, or additives to tune film morphology, wettability, or electronic levels.
  • Experimental considerations (general)

    • Establish thermal window by TGA/DSC before processing (spin-coating, drop-casting, PVD) to avoid decomposition during annealing.
    • If the molecule bears reactive handles (unknown here), standard transformations could include coupling (Suzuki, Buchwald–Hartwig), cycloadditions, or click chemistry to integrate into device-relevant scaffolds.
    • For solution processing, optimize solvent blend, solids loading, and drying profile; measure film thickness (profilometry/ellipsometry) and surface energy (contact angle).
  • Characterization endpoints (general)

    • Electrical/optical: UV–Vis, PL, quantum yield, CV, UPS, GIWAXS for packing; AFM/SEM for morphology.
    • Chemical: 1H/13C NMR, MS, elemental analysis, and purity profiling by HPLC/GC.

Note: Do not treat these examples as specific to TCPZ without structural confirmation.

Reaction Conditions

No item-specific reaction conditions are provided for TCPZ. The following are general considerations for exploring reaction space with an unknown materials-science small molecule.

  • Solvent and temperature (general)

    • Begin with a solvent matrix (toluene, EtOAc, ACN, MeOH/EtOH/iPrOH, DCM, DMF, DMSO, 2-MeTHF, CPME) at 20–80 °C. Use 0.05–0.2 M concentration for kinetic clarity.
    • If air/moisture sensitivity is suspected, employ Schlenk/argon techniques and dry solvents (Karl Fischer <200 ppm recommended; item-specific spec not provided).
  • Catalysis and reagents (general)

    • For cross-coupling candidates: Pd/Pt/Ni catalysts with standard ligands; base selection (K2CO3, Cs2CO3, NaOtBu) per electrophile/nucleophile pairing.
    • For radical chemistry: photoredox (Ir/Ru or organic dyes) under blue/green LEDs with oxygen exclusion.
  • Monitoring and endpoints

    • Track progress by LC–MS or GC–MS; confirm product identity via NMR. Record mass balance to detect decomposition.
    • For materials endpoints, characterize films/devices post-processing (AFM, GIWAXS, electrical tests) to link condition → performance.
  • Cautions

    • Do not assume stability to strong acids/bases, oxidants, or nucleophiles without data. Perform small-scale scouting before scale-up.
Safety and Handling

Safety information specific to this item is not provided in the Product Data. Always consult the SDS for authoritative guidance.

  • Item-specific hazard data (Product Data)

    • Signal word: Not specified for this item; refer to SDS.
    • GHS classifications: Not specified for this item; refer to SDS.
    • H/P statements: Not specified for this item; refer to SDS.
    • Pictograms: Not specified for this item; refer to SDS.
  • General laboratory precautions (general)

    • Handle in a fume hood; avoid inhalation of vapors/dust and contact with skin/eyes.
    • Wear PPE: lab coat, safety glasses or splash goggles, and appropriate chemical-resistant gloves (nitrile as a default; verify compatibility once solvent system is known).
    • Avoid incompatible materials until confirmed by SDS; common incompatibilities include strong oxidizers, strong acids/bases, and reactive metals.
  • First-aid overview (general)

    • Inhalation: Move to fresh air; seek medical advice. Skin/eye contact: Rinse with water for at least 15 minutes; remove contaminated clothing; seek medical attention. Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
  • Hygiene and waste

    • Prevent environmental release. Collect residues and rinsates in compatible containers. Dispose via licensed chemical waste contractor according to local regulations.
  • Special risks

    • If TCPZ contains peroxide-forming moieties (unknown from current data), perform periodic peroxide tests. If crystalline or energetic functional groups are suspected, avoid heating and friction until DSC screening is performed.
Solvent Selection

Solvent guidance cannot be item-specific without a known structure; below are general strategies to identify suitable media for materials-science small molecules.

  • General polarity screening strategy

    • Screen across a solvent polarity ladder: hexanes, toluene, EtOAc, acetone, acetonitrile, methanol, ethanol, isopropanol, DCM, DMF, DMSO, 2-MeTHF, CPME.
    • Start at 10 mg/mL at 23 °C; note dissolution kinetics and stability over 24–72 h.
  • Special cases

    • If ionic or highly polar, consider water-miscible solvents (MeOH, EtOH, ACN, DMF, DMSO). If hydrophobic, use aprotic media (toluene, DCM, EtOAc, CPME, 2-MeTHF).
    • For film formation or device fabrication, choose solvents with suitable boiling points and vapor pressures to control drying rate and morphology.
  • Comparison notes (general)

    • 2-MeTHF and CPME are greener alternatives to THF/Et2O with broader miscibility windows and lower peroxide tendency.
    • DMSO/DMF maximize solubility for polar substrates but may be difficult to remove and can plasticize films; ACN can balance volatility and polarity.
  • Practical tips

    • Perform Karl Fischer on final solutions if water-sensitive. Filter through 0.2 µm PTFE/NYLON before thin-film or analytical use.
    • Verify that the solvent does not react with TCPZ (no item-specific reactivity provided; confirm experimentally).
Storage and Reconstitution

Item-specific storage information is minimal in the Product Data.

  • Item-specific storage (Product Data)

    • Recommended storage: Room temperature.
    • Shipped in: Not specified for this item; refer to CoA/Spec Sheet.
    • Form and appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • General storage guidance

    • Keep container tightly closed in a dry, well-ventilated place. Protect from moisture, heat, and direct light until stability is known.
    • If the compound is air- or light-sensitive (unknown here), store under inert gas in amber glass. Consider desiccant or molecular sieves for hygroscopic materials.
  • Reconstitution/preparation (general)

    • For solids: weigh quickly, cap immediately; dissolve in a compatible dry solvent confirmed by a small solubility/stability test. Filter through 0.2 µm prior to sensitive applications.
    • For oils/liquids: record mass by tared vial; if viscosity is high, warm gently below any known decomposition onset (not specified) and dilute with a suitable solvent.
  • Stability note

    • In the absence of item-specific stability data, prepare fresh solutions and avoid extended storage in reactive solvents. Always consult the SDS/CoA for lot-specific recommendations.
Structure and Identity

Brief overview: TCPZ (SKU T434320) is listed under Materials Science. Item-specific identifiers are limited in the provided data.

  • Item-specific identifiers (Product Data)

    • Product name: TCPZ
    • CAS: 890148-68-2
    • PubChem CID: 57872440
    • InChIKey: 185651 (as provided)
    • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Structural features

    • 2D/3D structure, ring systems, and functional groups are not provided in the current Product Data. No stereochemical descriptors are available.
  • Practical identity notes (general)

    • When structure fields are incomplete, confirm identity by orthogonal methods: HRMS (exact mass), 1H/13C NMR, HSQC/HMBC (for connectivity), IR (functional groups), and, if crystalline, single-crystal XRD.
    • Cross-check the CAS and CID against institutional databases and the Aladdin CoA to ensure consistency before use in regulated workflows.
  • Documentation

    • For definitive structural specification, consult the CoA/SDS/Spec Sheet for this lot. If you require a structure file (SDF/MOL), request from technical support with the SKU and lot number.
Synthetic Utility

Specific functional groups and reactivity for TCPZ are not provided. The guidance below outlines typical roles materials-oriented small molecules can play in synthesis.

  • Potential roles (general, non-item-specific)

    • As a building block: incorporation via cross-coupling, nucleophilic substitutions/additions, or cycloadditions to construct extended conjugation or functional interfaces.
    • As a ligand/additive: modulation of metal catalysis or crystal growth (if coordinating moieties are present).
    • As a precursor: thermal/photochemical conversion to active species in films or coatings (e.g., in situ deprotection, crosslinking) if such groups exist.
  • Strategy and verification

    • Map reactivity by small-scale screens under orthogonal conditions (acidic, basic, radical, redox), monitoring by LC–MS/GC–MS and NMR.
    • Establish incompatibilities prior to scale-up—especially sensitivity to air, moisture, light, or heat via storage-stability studies.
  • Documentation

    • Because no group-level data are supplied here, treat all synthetic plans as exploratory until the structure is confirmed from the CoA/SDS.
Target Specificity

Not applicable. TCPZ is not supplied as a biological macromolecule, antibody, or inhibitor in this listing, and no target-binding information is provided in the Product Data.

  • Item-specific target data
    • None provided; not applicable to this materials-science product.

Perguntas frequentes

How should this product be stored?
Store at room temperature.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 890148-68-2, the molecular formula is C57H36N6. InChIKey KOUVXIWGXJSZHF-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.