Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Revisões
Avaliações dos Clientes
Application Protocols
No item-specific, validated application protocols are provided in the Product Data. The following are general, literature-based examples for Tris-HCl buffers (for research use only):
Tris-Buffered Saline (1× TBS), pH 7.6:
20 mM Tris-HCl, 150 mM NaCl in DI water. Adjust pH at 25 °C. Optional: 0.05% Tween-20 (TBST) for immunoblot washes.
Protein sample dilution buffer (generic):
50 mM Tris-HCl pH 7.5–8.0, 150 mM NaCl, 1 mM EDTA, 0.1% Nonidet P-40 or Triton X-100; add protease inhibitors fresh.
1 M Tris-HCl stock solution:
Dissolve ~157.6 g Tris·HCl per liter; adjust pH with small aliquots of Tris base or HCl at intended use temperature. Filter-sterilize if sterility required; store at 2–8 °C for several months.
Nucleic acid storage (TE-like):
10 mM Tris-HCl pH 8.0, 1 mM EDTA. Filter-sterilize; store at 2–8 °C. For RNA work, ensure RNase-free technique throughout.
These examples are illustrative; adjust compositions and conditions to your SOPs and assay requirements. Always verify compatibility with enzymes, labels, and detection methods used.
Biological Roles
Functional role (literature): Tris-HCl provides buffering capacity in the near-neutral to mildly alkaline range by maintaining a defined ratio of protonated (Tris·H+) and unprotonated (Tris) species. It stabilizes pH-sensitive biomolecules such as proteins and nucleic acids during purification, storage, and analysis.
Interactions and considerations:
Enzyme compatibility: Generally compatible with many enzymes, but the primary amine can participate in acid–base catalysis or weak metal coordination, subtly altering activity in metalloenzymes. Assay-specific validation is recommended.
Nucleic acids: Common component in TE (Tris–EDTA) systems protecting DNA/RNA from acid hydrolysis and metal-catalyzed degradation (via EDTA chelation).
Proteins and membranes: Frequently used with salts/detergents (e.g., NaCl, Tween-20, Triton X-100) to maintain ionic strength and reduce nonspecific interactions.
Temperature dependence:
Tris buffer pKa is temperature sensitive; pH measured at room temperature can deviate at 4 °C or 37 °C, impacting biological activity and binding equilibria. Always calibrate at use temperature or apply correction.
Interference with conjugation/labeling:
The amine can consume activated esters (NHS) and form Schiff bases with aldehydes; use non-amine buffers (HEPES, phosphate) for bioconjugation steps.
Osmolality/ionic strength:
Tris-HCl contributes minimally to osmolality at typical concentrations; adjust with NaCl or KCl for physiological ionic strength where required.
Buffer Applications
Tris-HCl is a cornerstone buffering component for biochemical and molecular biology workflows. Below are practical, literature-based preparations and considerations (not item-specific specs).
Effective range and temperature:
pKa(25 °C) ≈ 8.06; useful range pH 7.0–9.0. Expect ΔpH ≈ −0.028 per °C increase; calibrate pH at working temperature.
Common formulations (examples):
1.0 M Tris-HCl, pH 7.4 or 8.0: Dissolve ~157.6 g Tris·HCl per 1 L water to start; fine-adjust pH with Tris base (to raise) or HCl (to lower). Filter-sterilize (0.22 µm) if sterility required.
TBS (Tris-buffered saline), pH 7.4–8.0: 20–50 mM Tris-HCl, 150 mM NaCl; optional 0.05% Tween-20 (TBST) for immunoblot washing.
Tris–glycine electrophoresis buffers: e.g., Running buffer ~25 mM Tris, 192 mM glycine, 0.1% SDS (pH ~8.3). Transfer buffer variants may include methanol.
TE buffer: 10 mM Tris-HCl, 1 mM EDTA; set pH (commonly 7.5–8.0) for nucleic acid storage.
Practical tips:
Make a concentrated Tris-HCl stock (e.g., 1–2 M) and dilute to working strength to improve reproducibility.
Measure pH after bringing solution to final volume and temperature; Tris buffers can shift upon dilution or temperature change.
For RNase-free applications, treat solutions with DEPC before adding Tris (DEPC reacts with amines) or use certified nuclease-free materials and sterile filtration.
Avoid Tris in aldehyde fixation steps and during NHS-ester conjugation; switch to phosphate or HEPES during those phases.
All numerical examples are literature-based approximations to aid planning; verify against your protocol requirements.
Green Alternatives
Tris-HCl is water-based, non-volatile, and generally low in acute hazard—attributes favorable from a green chemistry perspective for lab buffers. Selection of an alternative depends on experimental constraints rather than environmental concerns alone.
Comparative overview (literature; general guidance):
Tris-HCl: Widely available; effective pH 7.0–9.0; temperature-sensitive pKa; amine functional group can interfere with amine-reactive chemistries.
HEPES: Zwitterionic, minimal interaction with metal ions and biomolecules; lower temperature dependence; higher cost; limited biodegradability concerns.
MOPS/MES: Good buffering capacity in pH 6.0–7.5 range; minimal amine reactivity; also more expensive; some aquatic persistence reported.
Phosphate buffers: Inexpensive, biodegradable; excellent for amine-reactive conjugations; can precipitate with divalent cations and may inhibit some enzymes.
Mini comparison (pros/cons):
Tris-HCl: +Cost-effective, +biocompatible, +low volatility; −temperature-sensitive, −interferes with NHS/aldehyde chemistries.
HEPES/MOPS: +Stable pH across temperatures, +low reactivity; −cost, −potential persistence.
Phosphate: +Green and cheap; −precipitates with Ca2+/Mg2+, −can affect phosphorylation pathways.
Greener practices with Tris-HCl:
Prepare concentrates to reduce packaging; use reusable glass where possible.
Neutralize and dispose via aqueous waste streams per local regulations; avoid unnecessary additives.
Validate buffer at experimental temperature to reduce repeats and waste.
Pharmaceutical Uses
Context (general; no clinical claims): Tris-HCl is widely used as a buffering excipient in pharmaceutical development and manufacturing to stabilize pH in formulations such as parenterals, ophthalmics, and biotherapeutic preparations.
Roles and considerations (literature):
Buffering agent: Maintains product pH to ensure stability of API and excipients. Particularly useful for proteins and peptides near neutral to slightly basic pH.
Compatibility: The primary amine may interact with aldehyde-containing actives or amine-reactive excipients; compatibility studies are essential.
Ionic strength: Often combined with NaCl to control tonicity; osmolarity must be validated for parenteral use.
Regulatory: Tris and Tris-HCl are referenced in multiple pharmacopeias as buffering agents; grade selection (e.g., compendial) depends on application requirements.
Practical development tips:
Conduct pH drift studies across storage temperatures owing to Tris’s temperature-dependent pKa.
Evaluate metal-catalyzed degradation pathways; Tris does not strongly chelate metals—pair with chelators (e.g., EDTA) if needed.
Low UV absorbance makes Tris-compatible with many spectroscopic assays, but confirm baseline in the target wavelength range.
Note: No item-specific pharmacopeial status or grade is provided for this SKU; consult the CoA/Spec Sheet for grade and suitability for regulated uses. For research use only (per Product Data).
Physical Properties
Item-specific values (from Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Any other specifications (bp/mp, density, RI, UV cutoff, metal content, water, etc.): Not specified for this item; refer to CoA/Spec Sheet.
Literature/typical values (for context; not item-specific specifications):
Form: White crystalline solid (literature, common for Tris·HCl).
Melting point: ~150–157 °C (often with decomposition; literature reports vary by hydration and purity).
Solubility: Freely soluble in water; low solubility in most organic solvents (alcohols, ethers) due to ionic character (literature).
pKa (Tris base): ~8.06 at 25 °C; effective buffering range ~pH 7.0–9.0. For Tris·HCl solutions, final pH depends on ratio Tris base/Tris·HCl and temperature (literature).
Temperature coefficient of pKa: approximately −0.028 pH units/°C (literature), meaning Tris buffers shift more acidic at higher temperature.
Hygroscopicity: Mildly hygroscopic tendencies have been noted; store dry to maintain assay (literature).
Partitioning: Highly hydrophilic; logP not meaningful for an ionic salt in water (literature).
Notes: Always consult the item’s CoA/SDS for exact specifications applicable to the supplied lot. Literature values above are for general guidance only and may vary with hydration state and grade.
Quality and Grades
Item-specific grade/purity from Product Data: Not specified for this item; refer to CoA/Spec Sheet.
Interpreting common grades for Tris·HCl (general guidance; not specific to this SKU):
Molecular biology grade: Low nuclease (RNase/DNase) and protease activity; suitable for DNA/RNA/protein workflows. Often accompanied by low metal/UV-absorbing impurities.
Biochemistry/ACS/AR grade: High assay purity with tight limits on inorganic contaminants; suitable for most analytical and preparative biochemistry applications.
Electrophoresis grade: Optimized for low background in gels/blotting; minimal UV-absorbing and fluorescent impurities.
Stabilizers/anti-caking agents: Tris·HCl is typically offered neat without stabilizers. If any additives are present, they will be declared on the CoA/Spec Sheet (none specified for this item).
What to check on receipt:
CoA for assay (%), water content (KF), heavy metals, and UV profile if relevant to your application. If values are required for method validation, obtain lot-specific CoA.
For nucleic-acid work, confirm nuclease/protease testing results. For MS-sensitive applications, request trace metal/organic impurity data if needed.
Reaction and Applications
As a buffer reagent rather than a reactive substrate, Tris-HCl’s “applications” focus on maintaining pH in biochemical workflows.
Core applications (literature/general):
Protein handling: Tris-buffered saline (TBS, pH 7.4–8.0) for washing, dilution, and immunoassays; TBST with Tween-20 for Western blots.
Electrophoresis: Tris–glycine (running) and Tris–glycine–SDS (TG-SDS) systems for PAGE; Tris–acetate–EDTA (TAE) and Tris–borate–EDTA (TBE) for nucleic acid gels (prepared from Tris base with acid components; final pH set by HCl or counter-acid).
Enzyme assays: Effective buffering near physiological pH for many hydrolases, kinases, and binding assays; verify enzyme-specific compatibility.
Sample prep: Lysis, extraction, and storage buffers often combine Tris-HCl with salts (NaCl/KCl), EDTA, and protease inhibitors.
Practical tips:
Temperature matters: Tris pKa decreases with temperature (≈−0.028 pH/°C). Calibrate pH at the intended working temperature.
Avoid for amine-reactive chemistries: The primary amine competes with substrates (e.g., NHS esters), quenching labeling reactions.
Metal interactions: Tris is a weak ligand; typically compatible with most metal-dependent systems but can perturb some metalloenzymes at high concentrations—verify experimentally.
CO2 exposure: Minimizes effect compared to carbonate buffers; nonetheless, keep containers closed to maintain pH and ionic strength.
Preparation note:
Tris-HCl can be used alone to set target pH or paired with Tris base to prepare precise buffer mixtures (conjugate acid/base pair) with desired ionic strength.
Reaction Conditions
Because Tris-HCl functions as a buffer rather than a reactant, “reaction conditions” translate to buffer preparation and use parameters (literature/general guidance):
Preparation:
Dissolve the calculated mass of Tris-HCl in ~80% of final water volume. Adjust pH at the target working temperature with Tris base (to increase pH) or HCl (to decrease pH). Bring to volume, mix thoroughly, and, if required, sterile-filter through 0.22 µm.
Concentrations:
Common working strengths: 10–100 mM for biochemical assays; 20–50 mM in TBS; 0.5–2.0 M for stock solutions.
Temperature:
Calibrate and label buffer pH at its intended use temperature (e.g., 4 °C cold room, 25 °C ambient, or 37 °C incubations) due to Tris’s temperature-dependent pKa.
Additives and compatibility:
Salts (NaCl/KCl) for ionic strength; EDTA for metal chelation; nonionic detergents (Tween-20, Triton X-100) for membrane/protein work; preservatives (e.g., sodium azide) for storage when compatible with downstream applications.
Expected performance:
Stable pH control within ±0.05–0.1 units in well-prepared solutions under standard lab conditions. Avoid prolonged CO2 exposure and evaporation, which can change pH and concentration.
All values are literature-based guidance; adapt to method SOPs and verify against assay performance. No item-specific preparation specs are provided for this SKU.
Safety and Handling
Item-specific hazard data (from Product Data):
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
GHS Classification: Not specified for this item; refer to SDS.
Pictograms: Not specified for this item; refer to SDS.
General safety information (literature/context; not a substitute for SDS):
Classification: Tris·HCl is commonly not classified as hazardous under GHS at laboratory quantities; may cause eye/skin/respiratory irritation. Verify with the SDS for this product.
PPE: Use standard laboratory PPE—lab coat, safety glasses, and appropriate gloves (e.g., nitrile). Avoid inhalation of dust and contact with eyes/skin.
Handling: Prepare solutions in a fume hood or well-ventilated area to minimize dust exposure. When adjusting pH, add strong acids/bases slowly with stirring and cooling if necessary.
Incompatibilities: Strong oxidizers (general prudence). Avoid mixing concentrated Tris buffers with aldehyde fixatives without awareness of potential amine–aldehyde reactions (e.g., Schiff base formation) that may confound assays.
First aid (overview): If inhaled—move to fresh air. Skin/eye contact—rinse with water for at least 15 minutes; remove contaminated clothing. If ingested—rinse mouth; seek medical attention as needed. Always consult SDS for authoritative guidance.
Environmental: Dilute aqueous solutions are generally of low environmental concern, but avoid uncontrolled release; dispose according to institutional and local regulations.
Solvent Selection
Tris-HCl is intended for use in aqueous systems; solvent selection revolves around water quality and co-solutes rather than organic solvent choice.
Polarity and miscibility (literature):
Ionic, highly hydrophilic salt; freely miscible with water at typical buffer concentrations.
Poorly soluble in most organic solvents; not recommended for nonaqueous systems.
Water quality considerations:
Use freshly produced deionized water (≥18 MΩ·cm) for sensitive biochemical or molecular biology workflows.
For cell culture, endotoxin-controlled water may be required; for RNase-free buffers, treat water or use certified nuclease-free supplies.
Typical co-solutes and compatibility:
Compatible with common salts (NaCl), chelators (EDTA), and mild detergents (Tween-20, Triton X-100) used in TBS/TBST and lysis buffers.
Primary amine of Tris can interfere with amine-reactive chemistries (e.g., NHS ester labeling); choose alternative buffers (HEPES, phosphate) in those cases.
When to choose Tris-HCl vs alternatives:
Choose Tris-HCl for assays near pH 7.2–8.8 with minimal metal coordination and good biological compatibility.
Consider HEPES/MOPS for CO2-independent cell work or where lower temperature sensitivity is needed; choose phosphate when compatibility with amine-reactive conjugations is critical.
Reconstitution and handling (general guidance; not item-specific):
Solid to solution: Accurately weigh the required amount of Tris-HCl, dissolve in ~80% of final volume of DI water, adjust pH at the intended working temperature with Tris base or HCl, bring to final volume, and mix thoroughly.
Sterilization: For sterile applications, filter through a 0.22 µm membrane. Avoid autoclaving if containing heat-labile additives; Tris solutions alone typically tolerate sterilization but verify pH drift post-autoclave.
Storage of solutions (general):
Short term (days–weeks): 2–8 °C in clean, tightly sealed bottles to limit CO2 ingress and evaporation.
Long term (months): Store as concentrated stocks (0.5–2 M) at 2–8 °C; for nuclease-free needs, prepare with nuclease-free water and practice aseptic technique. Avoid freezing unless concentration and container allow for expansion.
Light sensitivity: Not notably light-sensitive; amber containers optional.
Stability notes:
Tris buffers exhibit temperature-dependent pH; label containers with preparation pH and temperature. Minimize repeated warming/cooling cycles.
Documentation:
For any required specifications (assay, water, metals, UV), consult the lot-specific CoA/Spec Sheet. Research use only (per Product Data).
Structure and Identity
Brief overview: Tris-Hydrochloride (Tris·HCl) is the protonated hydrochloride salt of the tris(hydroxymethyl)aminomethane base, widely used as a biological buffer near neutral to mildly alkaline pH.
Item-specific identifiers (from Product Data):
CAS: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Literature identity (for context; not item-specific):
Functional groups: one primary ammonium (–NH3+ in salt form), three primary alcohols (–CH2OH), counterion Cl−.
Structural features: a quaternary carbon core (2-amino-2-(hydroxymethyl)propane-1,3-diol skeleton) bearing three hydroxymethyl substituents and an ammonium center paired with chloride. No rings; no stereocenters.
2D description: a central carbon bound to –NH3+ and three –CH2OH arms; chloride anion balances the cationic charge.
Category relevance: Listed under proteins category; commonly used to prepare Tris-buffered saline (TBS), Tris-glycine, and related buffers for protein and nucleic acid workflows.
Synthetic Utility
This product is a buffer reagent and is not typically employed as a synthetic building block in organic synthesis. However, several practical considerations are relevant in lab workflows (literature/general):
Functional group behavior:
Contains a primary amine (as ammonium in the HCl salt) and three alcohols; in basic conditions the free amine can act as a weak nucleophile/base.
Can quench activated esters (e.g., NHS esters) and anhydrides—important when planning bioconjugations or polymer couplings.
Workup/neutralization uses:
Tris (free base) is occasionally used to neutralize acidic solutions or to quench acylation steps; Tris-HCl can provide controlled buffering without strong basicity.
Analytical implications:
Minimal UV absorbance above ~230 nm is generally compatible with UV-based HPLC of biomolecules; nevertheless, buffer volatility is low, so LC–MS workflows may prefer volatile buffers (e.g., ammonium bicarbonate) instead of Tris.
Retrosynthetic value:
Limited. The presence of multiple hydroxyls and an amine leads to extensive hydrogen bonding and salt formation; protection strategies would be needed for any derivatization, which is rarely pursued outside of materials/bioconjugation research.
For true synthetic transformations, select reagents/buffers designed for the chemistry at hand; use Tris-HCl primarily to control pH in aqueous, bio-relevant steps.
Target Specificity
Not applicable. This product is a chemical buffer, not a biological targeting reagent (e.g., antibody, probe, or inhibitor). No antigen/epitope/clone/isotype details are relevant or provided. For application-focused guidance, see Buffer Applications and Application Protocols.
Usamos cookies para garantir o funcionamento adequado do site e, quando permitido, para melhorar a sua experiência. Você pode gerenciar suas preferências a qualquer momento nas Configurações. Saiba mais em nossa Política de Cookies.
Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?
Lembrar-me mais tarde
Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.