Bio-based content 33%-100% for sensitive chromatographic and analytical workflows requiring minimal baseline interference.
Room temperature Ships Check lot-specific COA for exact specifications.
SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.
Cited in 2 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.
Typical applications
The material can be used as a modified substation or injection molding raw material.
Guidelines for molding
1.The packaging of this product is moisture-proof packaging, the moisture content is constant before unopacking, it is recommended to use as soon as possible after opening. Before using the opened product, it is recommended that it be dehumidification and drying as necessary to ensure the quality of the injection molding products and the stability of the injection molding process. Drying temperature should not be too high, the maximum should not exceed 100℃, the time should not be too long, the maximum should not exceed 5 hours.
2.Injection molding temperature should not be too high, it is recommended to 230℃~250℃ is appropriate. Too high temperature easily makes bio-based polyamide resin crack at high temperature, product performance is reduced.
3.In the injection molding production process, the mold temperature is appropriate at 60℃~90℃, it is recommended that the mold temperature be kept at the upper limit of the temperature range, too low mold temperature will lead to poor flow of bio-based polyamide resin, poor surface finish, surface defects, high shrinkage of products or brittleness lead to quality decline and so on.
Comprehensive hazard, handling, storage, and regulatory compliance document.
Download SDS →Lot-specific quality data. Enter your lot number to retrieve the exact COA.
Look up COA →Full quality attributes and acceptance criteria for this grade.
View spec sheet →Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Date | Item |
|---|---|---|---|
 L2103429 | Certificate of Analysis | Sep 09, 2025 | B283725 |
| Melt Point(°C) | 230-250℃ |
|---|
| 1. Yang Haoyu, Zhang Xiaoqi, Zhang Weiwei, Song Changyuan, He Suqin, Huang Miaoming, Liu Hao, Xu Wanlin, Zhu Chengshen, Liu Wentao. (2025) Preparation of low-temperature-resistant and high-toughness bio-based polyamides and the application of their microcellular foams in the field of thermal insulation. CHEMICAL ENGINEERING JOURNAL, [PMID:] [10.1016/j.cej.2025.160967] |
| 2. Xintao Ma, Haoyu Yang, Xiaoqi Zhang, Jing Xia, Chenglin Wang, Dongying Gong, Na Lin, Zihao Liu, Hao Liu, Suqin He, Miaoming Huang, Wanlin Xu, Wentao Liu, Chengshen Zhu. (2025) Achieving fire safety in bio-based polyamide 510/6/DT with ultra-efficient reactive flame retardants. POLYMER DEGRADATION AND STABILITY, [PMID:] [10.1016/j.polymdegradstab.2025.111579] |
