Calcium 2-ethylhexanoate - ≥98% , CAS No.136-51-6

CAS: 136-51-6 Cat. No.: C472850 Fórmula: C16H30CaO4 Peso molecular: 326.49 Número EC: 205-249-0
Disponible para pedir
CALIDAD & PUREZA ≥98%
Synonyms
Calcium 2-ethylhexoate|Nikka Octhix Calcium|OCTA-SOLIGEN CALCIUM 7HS|NUSA CA|calcium;2-ethylhexanoate|CALCIUM BIS(2-ETHYL HEXANOATE)|Calcium Hex-Cem|Calcium 2-ethylhexanoate|Calcium 2-ethyl-hexanoate|CALCIUM BIS(2-ETHYLHEXANOATE)|Octope Ca|Hexanoic acid, 2-ethyl-, calcium salt (2:1)|BIS(2-ETHYLHEXANOIC ACID)CALCIUM SALT|CALCIUM2-ETHYLHEXANOATE
Storage
Room temperature
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
1g
C283314-1g
Fabricado bajo pedido · 8–12 semanas
112,72€
1g
C472850-1g
—
3 Disponible
24,21€
5g
C283314-5g
Fabricado bajo pedido · 8–12 semanas
347,01€
5g
C472850-5g
—
6 Disponible
97,97€
25g
C472850-25g
—
1 Disponible

339,20€

404,28€
Guardar 65,08 € (16.10%)
100g
C472850-100g
—
1 Disponible

783,48€

1.453,38€
Guardar 669,89 € (46.09%)
Enter a quantity for the sizes you want to add.

Especificaciones

Sinónimos
Calcium 2-ethylhexoate | Nikka Octhix Calcium | OCTA-SOLIGEN CALCIUM 7HS | NUSA CA | calcium;2-ethylhexanoate | CALCIUM BIS(2-ETHYL HEXANOATE) | Calcium Hex-Cem | Calcium 2-ethylhexanoate | Calcium 2-ethyl-hexanoate | CALCIUM BIS(2-ETHYLHEXANOATE) | Octope Ca | Hexanoic acid, 2-ethyl-, calcium salt (2:1) | BIS(2-ETHYLHEXANOIC ACID)CALCIUM Show more
Especificaciones y pureza
≥98%
Condiciones de almacenamiento de almacenamiento
Room temperature
Pureza
≥98%
Nombres e identificadores
Pubchem Sid
Pubchem Sid Url
https://pubchem.ncbi.nlm.nih.gov/substance/488183439
SMILES
CCCCC(CC)C(=O)[O-].CCCCC(CC)C(=O)[O-].[Ca+2]
IUPAC Name
calcium;2-ethylhexanoate
InChIKey
LTPCXXMGKDQPAO-UHFFFAOYSA-L
InChI
1S/2C8H16O2.Ca/c2*1-3-5-6-7(4-2)8(9)10;/h2*7H,3-6H2,1-2H3,(H,9,10);/q;;+2/p-2
Isómeros SMILES
CCCCC(CC)C(=O)[O-].CCCCC(CC)C(=O)[O-].[Ca+2]
Peso molecular
326.49
Reaxys
11343550
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=11343550&ln=

Datos avanzados

Taxonomic Classification

Taxonomy Tree

KingdomOrganic compounds
SuperclassLipids and lipid-like molecules
ClaseFatty Acyls
SubclassFatty acids and conjugates
Intermediate Tree Nodes Not available
Direct ParentMedium-chain fatty acids
Alternative Parents Branched fatty acids  Carboxylic acid salts  Organic calcium salts  Monocarboxylic acids and derivatives  Carboxylic acids  Organic oxides  Hydrocarbon derivatives  Carbonyl compounds  
Molecular FrameworkNot available
Substituents Medium-chain fatty acid - Branched fatty acid - Carboxylic acid salt - Organic calcium salt - Monocarboxylic acid or derivatives - Carboxylic acid - Carboxylic acid derivative - Organic oxygen compound - Organic oxide - Hydrocarbon derivative - Organic salt - Organooxygen compound - Carbonyl group - Aliphatic acyclic compound
DescripciónThis compound belongs to the class of organic compounds known as medium-chain fatty acids. These are fatty acids with an aliphatic tail that contains between 4 and 12 carbon atoms.
External Descriptors Not available
Estructura 3D
Modelo de Estructura Química Interactiva





Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

8 results found

Lot NumberCertificate TypeFechaArticulo
H2321476H2321476Certificate of AnalysisJun 09, 2026 C472850
H2321477H2321477Certificate of AnalysisJun 09, 2026 C472850
H2321478H2321478Certificate of AnalysisJun 09, 2026 C472850
H2321494H2321494Certificate of AnalysisJun 09, 2026 C472850
H2321495H2321495Certificate of AnalysisJun 09, 2026 C472850
H2321497H2321497Certificate of AnalysisJun 09, 2026 C472850
H2321498H2321498Certificate of AnalysisJun 09, 2026 C472850
H2321501H2321501Certificate of AnalysisJun 09, 2026 C472850
Propiedades químicas y físicas
Punto de fusión (°C)215 °C
Peso molecular326.48
XLogP3
Hydrogen Bond Donor Count0
Hydrogen Bond Acceptor Count4
Rotatable Bond Count8
Exact Mass326.177 Da
Monoisotopic Mass326.177 Da
Topological Polar Surface Area80.300 Ų
Heavy Atom Count21
Formal Charge0
Complexity93.900
Isotope Atom Count0
Defined Atom Stereocenter Count0
Undefined Atom Stereocenter Count2
Defined Bond Stereocenter Count0
Undefined Bond Stereocenter Count0
The total count of all stereochemical bonds0
Covalently-Bonded Unit Count3
Seguridad y peligros (GHS)
Pictogramas
GHS05,   GHS08
Señal
Danger
Indicaciones de peligro

H226:Flammable liquid and vapor

H302:Harmful if swallowed

H315:Causes skin irritation

H317:May cause an allergic skin reaction

H318:Causes serious eye damage

H319:Causes serious eye irritation

H334:May cause allergy or asthma symptoms or breathing difficulties if inhaled

H335:May cause respiratory irritation

H361:Suspected of damaging fertility or the unborn child

H411:Toxic to aquatic life with long lasting effects

Precauciones

P210:Keep away from heat, hot surface, sparks, open flames and other ignition sources. - No smoking.

P233:Keep container tightly closed.

P240:Ground/bond container and receiving equipment.

P241:Use explosion-proof [electrical/ventilating/lighting/.../] equipment.

P242:Use only non-sparking tools.

P243:Take precautionary measures against static discharge.

P261:Avoid breathing dust/fume/gas/mist/vapors/spray.

P264:Wash hands [and …] thoroughly after handling.

P270:Do not eat, drink or smoke when using this product.

P271:Use only outdoors or in a well-ventilated area.

P272:Contaminated work clothing should not be allowed out of the workplace.

P273:Avoid release to the environment.

P280:Wear protective gloves/protective clothing/eye protection/face protection.

P284:[In case of inadequate ventilation] Wear respiratory protection.

P321:Specific treatment (see ... on this label).

P330:Rinse mouth.

P391:Collect spillage.

P302+P352:IF ON SKIN: wash with plenty of water.

P303+P361+P353:IF ON SKIN (or hair): Take off Immediately all contaminated clothing. Rinse SKIN with water [or shower].

P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

P333+P313:IF SKIN irritation or rash occurs: Get medical advice/attention.

P362+P364:Take off contaminated clothing and wash it before reuse.

P370+P378:In case of fire: Use ... to extinguish.

P405:Store locked up.

P403+P233:Store in a well-ventilated place. Keep container tightly closed.

P403+P235:Store in a well-ventilated place. Keep cool.

P501:Dispose of contents/container to an approved waste disposal plant.

P203:Obtain, read and follow all safety instructions before use.

P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.

P301+P317:IF SWALLOWED: Get medical help.

P305+P354+P338:IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

P318:if exposed or concerned, get medical advice.

P317:Get emergency medical help.

P337+P317:If eye irritation persists: Get medical help.

P332+P317:If skin irritation occurs: Get medical help.

P319:Get medical help if you feel unwell.

P342+P316:If experiencing respiratory symptoms: Get emergence medical help immediately.

Reaxys
11343550
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=11343550&ln=
Preguntas frecuentes y artículos
Citations of This Product
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols

No vendor-tested bioassay or analytical protocols are specified for this item. Not specified for this item; refer to CoA/Spec Sheet.

General starting points (literature; not item-specific):

  • Coatings drier addition: Prepare a concentrated solution or use commercial solution; add to resin under agitation targeting typical calcium-on-resin levels (e.g., 0.02–0.2% Ca by weight), then fine-tune via dry-time panels.
  • ROP catalyst charge: Combine dried monomer and initiator with the calcium salt under inert atmosphere; heat to target temperature; monitor conversion by 1H NMR (monomer vs polymer methylene) and GPC.
  • Transesterification: Charge diol/diester and catalyst under nitrogen; heat with removal of alcohol byproduct; track acid/ester signals by IR (1735–1750 cm–1) and by GC of liberated alcohol.

These are illustrative only; optimize for your formulation and consult the SDS for safe handling.

Biological Roles

Applicability: This product is intended for research use in materials and synthetic chemistry. It is not used as a biological reagent per se. No medical or clinical claims.

Literature/general context (not item-specific):

  • Calcium: An essential macroelement in biology; functions in signaling, structural roles (bones, cell walls), and enzyme regulation. In biochemical research, calcium salts modulate processes through Ca2+ binding to proteins (EF-hand motifs) and membranes. However, calcium 2‑ethylhexanoate is not a standard biological calcium source due to its hydrophobic carboxylate.
  • 2‑Ethylhexanoate anion: A branched medium-chain carboxylate. In vivo, carboxylates are typically metabolized via β‑oxidation after activation to acyl‑CoA; branching can alter metabolic fate. This is academic context—this calcium salt is not intended for biological administration.
  • Laboratory relevance: Hydrophobic calcium carboxylates can act as surfactant-like species or phase-transferable calcium sources in nonaqueous systems, occasionally used in constructing calcium-based coordination materials with potential biointerfaces (e.g., Ca‑MOFs), yet the compound itself is not a buffer, nutrient, or biochemical cofactor reagent.

Conclusion: For any work intersecting biology (e.g., polymer scaffolds, coatings for biomedical devices), thoroughly remove residual carboxylate and confirm biocompatibility via standard assays, as performance/toxicity depends on residuals and formulation rather than the bulk salt.

Buffer Applications

Not typically applicable. Calcium 2‑ethylhexanoate is a hydrophobic metal carboxylate and is not used to prepare aqueous buffer systems. For calcium-containing aqueous buffers, water-soluble salts (e.g., CaCl2, Ca(NO3)2, Ca acetate) are preferred. Refer instead to the Solvent Selection and Reaction & Applications sections for relevant usage guidance in nonaqueous systems.

Green Alternatives

Context: Calcium 2‑ethylhexanoate is often selected for its balance of catalytic activity, relatively benign metal center, and compatibility with nonpolar systems. Green chemistry evaluation should consider metal toxicity, solvent system, and life-cycle impacts.

Comparison (literature; general guidance):

  • Calcium 2‑ethylhexanoate vs tin octoate (Sn(Oct)2):

    • Toxicity: Ca salt is generally considered less toxic than organotin catalysts.
    • Activity: Organotin often faster in ROP/transesterification; Ca requires higher loading or temperature.
    • Residues: Ca residues are more acceptable in many materials and biomedical research contexts.
  • Calcium 2‑ethylhexanoate vs calcium acetate:

    • Solvent: 2‑ethylhexanoate is superior in hydrophobic matrices; acetate enables aqueous/green solvent processing.
    • Volatility/odor: Both are low-volatility; acetate avoids long-chain carboxylate odor and persistence concerns.
  • Hydrocarbon carriers vs bio-based solvents:

    • Many commercial drier solutions use mineral spirits/xylene; greener alternatives include esters (e.g., ethyl lactate) or 2‑MeTHF when compatible with the resin/chemistry.

Small decision table (literature):

  • If working in nonpolar coatings: Ca 2‑ethylhexanoate in low-aromatic hydrocarbons minimizes VOC toxicity while maintaining compatibility.
  • If aiming for aqueous systems: Switch to Ca acetate or citrate and reformulate.
  • If avoiding metal driers: Enzymatic or photo-oxidative curing strategies can reduce metal use but may require new equipment/photoinitiators.

Tradeoffs: Greener alternatives may reduce catalytic rate or compatibility; pilot testing is essential to balance performance and environmental goals.

Pharmaceutical Uses

No therapeutic claims. This product is for research use only.

Literature/industry context (not item-specific):

  • Manufacturing aid/catalyst: Calcium carboxylates may be explored as less-toxic alternatives to organotin catalysts for synthesis of biomedical polymers (e.g., polyesters via ROP or transesterification). Any use in cGMP manufacturing requires full impurity and residual catalyst qualification.
  • Excipient status: Calcium 2‑ethylhexanoate is not a common pharmacopeial excipient. For calcium fortification or tablet excipients, pharmacopeial salts (e.g., calcium carbonate, phosphate, or citrate) are standard due to safety and aqueous processability.
  • Residuals in devices: When used in polymer syntheses destined for medical devices, residual metal and 2‑ethylhexanoate must be controlled and verified per ISO/USP extractables/leachables frameworks.

Formulation note: The hydrophobic ligand favors nonaqueous processing; if an aqueous route is required, consider switching to water-soluble Ca salts during synthesis and exchanging ligands later if needed.

Physical Properties

Item-specific physical specifications (for this catalog item):

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Other specs (mp/bp/density/UV cutoff/metal limits/water/peroxide): Not specified for this item; refer to CoA/Spec Sheet.

Literature/general properties (for reference; not item-specific):

  • Composition: Typically the anhydrous salt Ca(C8H15O2)2; commercial materials may contain coordinated solvent or exist as solutions in hydrocarbons for coatings applications.
  • Physical form: Solid or viscous semi-solid; many commercial offerings are supplied as concentrated solutions (“metal driers”) in aliphatic/aromatic solvents. Water-insoluble.
  • Solubility profile: Insoluble in water; soluble/miscible in nonpolar and moderately polar organic media (e.g., aliphatic hydrocarbons, toluene, xylene, mineral spirits); limited solubility in alcohols; essentially immiscible with highly polar protic media.
  • Polarity/partitioning: Strongly lipophilic due to two branched C8 chains; behaves as an organometallic soap/dispersible salt in nonpolar matrices.
  • Thermal behavior: Metal carboxylates can thermally decompose to oxides/carbonates at elevated temperature (>200–300 °C, literature), releasing hydrocarbons/CO2; exact onset depends on formulation and hydration.
  • Hygroscopicity: Minimal compared to alkali salts; however, can absorb moisture/CO2 at surfaces; avoid prolonged exposure for analytical uses.
  • Refractive index, pKa, logP, density, mp/bp: Not universally reported for the neat, anhydrous solid; consult SDS/CoA for your specific lot and formulation.
Quality and Grades

Item-specific quality information:

  • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Stabilizers/additives: Not specified for this item; refer to CoA/Spec Sheet.

General guidance on grades for calcium 2‑ethylhexanoate (literature/industry context):

  • Research grade: Suitable for catalysis studies, materials synthesis (e.g., coatings driers, sol–gel/MOF precursors). Impurity profile typically emphasizes low moisture/low acid number and controlled metal content.
  • Coatings grade (“drier” grade): Frequently supplied as a defined % metal (e.g., 5–10% Ca) in hydrocarbon solvent. Low water, low free acid, and controlled viscosity are key; UV absorbance is less critical than for chromatographic solvents.
  • High-purity/analytical grade: When used as a metal precursor (e.g., in thin films, sol–gel, or ALD/CVD solution routes), low inorganic contamination (alkali/transition metals) and well-defined stoichiometry are more important than appearance. Trace chloride/sulfate may be specified.

How to interpret stabilizers/solvents (if present):

  • Hydrocarbon carrier: Indicates solution form for easier dosing in coatings; composition is reported as metal content (% Ca) rather than wt% salt. Verify by CoA.
  • Neat solid: Preferable for synthetic chemistry and materials research to avoid solvent background. Verify hydration/solvent-of-crystallization by TGA/CoA.

Recommendation: Match grade to application—use neat/higher-purity material for catalysis or materials synthesis; coatings-grade solutions for resin curing. Always confirm exact assay, residual free acid, water, and solvent content on the product CoA.

Reaction and Applications

This compound serves widely as a lipophilic calcium source and Lewis acidic/basic catalyst component.

Key applications (literature; not item-specific):

  • Coatings drier (alkyds, oils): Acts as an auxiliary drier promoting through-drying, pigment wetting, and hardness development; often used in combination with cobalt/manganese/zirconium driers.
  • Transesterification and polycondensation: Calcium carboxylates catalyze ester exchange (e.g., polyesterifications). Advantages include low toxicity compared with tin catalysts and lower discoloration than iron.
  • Ring-opening polymerization (ROP): Effective catalyst/initiator for ROP of ε‑caprolactone and lactide when paired with alcohol initiators; calcium offers biocompatibility advantages in biomedical polymer research.
  • Materials precursor: Convenient Ca2+ source for coordination polymers/MOFs, sol–gel routes to Ca-containing oxides/carbonates, and as a dopant in oxide synthesis via thermal decomposition.
  • Stabilization: Used synergistically with Zn-based salts in PVC stabilization systems (literature) and as a surfactant-like dispersant for fillers/pigments in hydrophobic media.

Practical tips:

  • Speciation control: In protic media, partial ligand exchange (to alkoxides or mixed carboxylates) can occur; control solvent and alcohol content to tune activity.
  • Moisture: Not strongly hygroscopic, but water can interfere with esterifications/ROP; use dry solvents for kinetic control.
  • Dosing: For coatings, dosage is often expressed as metal-on-resin (% Ca); in catalysis, loadings of 0.1–5 mol% Ca are typical depending on transformation.
  • Synergy: Combine with primary redox driers (e.g., Co/Mn) in coatings for optimal surface and through-dry balance.
Reaction Conditions

General literature guidance (not item-specific; verify with your system by small-scale trials):

  • Transesterification/polycondensation (polyesters):

    • Solvent: Bulk melt or aromatic solvents (toluene/xylene).
    • Catalyst loading: 0.1–2 mol% Ca relative to monomer hydroxyl/acid groups.
    • Temperature: 120–220 °C depending on monomers; remove volatiles (ROH) continuously.
    • Notes: Water inhibits; use azeotropic removal (Dean–Stark) if in solvent. Monitor by acid number or GPC.
  • ROP of ε‑caprolactone/lactide:

    • Solvent: Bulk, toluene, or anisole; thoroughly dried.
    • Initiator: Primary alcohol (e.g., benzyl alcohol); [M]0/[I]0 typically 50–500.
    • Catalyst loading: 0.1–1 mol% Ca relative to monomer.
    • Temperature/time: 80–140 °C; 1–24 h depending on target Mn and catalyst loading.
    • Outcome: Narrow dispersity possible under dry, controlled conditions; quench with acid/alcohol.
  • MOF/coordination assembly:

    • Solvent: Alcohols, aromatics, or mixed; include auxiliary linkers as needed.
    • Temperature: Ambient to 150 °C (solvothermal).
    • Stoichiometry: 1:1 to 1:2 Ca:carboxylate linkers depending on design; 2‑ethylhexanoate may act as a modulatory ligand.
  • Thermal conversion to oxides/carbonates:

    • Atmosphere: Air or inert; ramp 1–10 °C/min.
    • Onset: Decomposition typically begins >200–300 °C (salt/formulation dependent).

Always validate conditions with control experiments and consult primary literature for your specific substrate set.

Safety and Handling

Item-specific hazard information:

  • Signal Word: Not specified for this item; refer to SDS.
  • H-Statements: Not specified for this item; refer to SDS.
  • GHS Classification & Pictograms: Not specified for this item; refer to SDS.

General safety (literature/SDS principles; not item-specific):

  • Likely hazards: Metal carboxylates may cause skin/eye irritation; ingestion may be harmful; dust/mist may irritate respiratory tract. Environmental hazard to aquatic life is possible due to poor water solubility and persistence of long-chain carboxylates.
  • PPE: Wear safety glasses or goggles, lab coat, and appropriate chemical-resistant gloves (e.g., nitrile). Use in a fume hood to minimize inhalation exposure, especially when heating or handling powders.
  • Handling: Avoid breathing dust/aerosols. Prevent contact with strong oxidizers and strong acids (acids can liberate 2‑ethylhexanoic acid). Do not heat above decomposition; decomposition can release irritating fumes (organic acids, CO2, possibly CaO/particulates).
  • Storage incompatibilities: Strong acids, strong oxidants. Avoid moisture ingress for analytical work; keep container tightly closed.
  • First aid (overview):
    • Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; seek medical attention if irritation persists.
    • Skin contact: Wash with soap and water; remove contaminated clothing. Seek medical attention if irritation develops.
    • Inhalation: Move to fresh air; seek medical attention if symptoms occur.
    • Ingestion: Rinse mouth; do not induce vomiting; seek medical advice.
  • Fire: Product is organic and combustible as a mixture; use dry chemical, CO2, or foam. Fire may produce irritating/opaque fumes. Always defer to the product-specific SDS for authoritative guidance.
Solvent Selection

Applicability: Calcium 2‑ethylhexanoate is a lipophilic metal carboxylate used as a reagent/catalyst/precursor rather than as a solvent.

  • Polarity class (literature): Nonpolar to weakly polar overall behavior in solution due to long alkyl chains; dissolves/disperses in low- to mid-polar organic solvents.
  • Miscibility/solubility (literature):
    • Good: aliphatic hydrocarbons (hexanes, heptane, mineral spirits), aromatics (toluene, xylene), esters (ethyl acetate), ketones (MEK, MIBK), some alcohols.
    • Poor/insoluble: water; highly polar protic media; very polar aprotics (e.g., DMSO) may solvate but are seldom used in coatings catalysis due to incompatibility.
  • Selection guidance by application:
    • Coatings drier: Choose the same solvent family as the resin/vehicle (e.g., mineral spirits or xylene for alkyds) to ensure rapid and uniform dispersion.
    • Polymerization/transesterification: Aromatics (toluene/xylene) or bulk (solvent-free) conditions are common; alcohol-containing media may alter speciation.
    • Materials precursor (MOFs/sol–gel): Aromatics or alcohols can be used; the anion must remain intact until coordination/assembly; avoid strong acids.

Brief comparison (literature):

  • Vs calcium acetate: Acetate is water-soluble (useful in aqueous systems) but incompatible with nonpolar matrices where 2‑ethylhexanoate excels.
  • Vs zinc/Co/Nd 2‑ethylhexanoates: These may give faster surface or through-drying in coatings; calcium often acts as an auxiliary drier and wetting/synergistic additive.
Storage and Reconstitution

Item-specific storage/shipping:

  • Storage Conditions: Room temperature (from Product Data). Protect from moisture and strong acids/oxidants. Keep container tightly closed.
  • Shipped In: Not specified for this item; refer to CoA/Spec Sheet.

General guidance (literature; not item-specific):

  • Stability: Store in a dry place, away from heat sources. Long-chain carboxylates are generally stable under ambient conditions when sealed.
  • Handling after opening: Minimize exposure to ambient moisture/CO2 to avoid surface hydrolysis/carbonation and changes in free acid content.
  • Solution preparations: If preparing stock solutions (e.g., in mineral spirits, toluene, or xylene), use dry solvent and record concentration as either wt% salt or % Ca metal for reproducibility. Filter if necessary to remove insolubles before use.
  • Shelf life: Check periodically for changes in viscosity, precipitation, or odor; re-verify assay (acid number, Ca content) for sensitive applications.
  • Disposal: Treat as organic metal-containing waste; follow institutional and local regulations.

For precise storage, stability, and any reconstitution procedures specific to your lot, consult the product’s CoA and SDS.

Structure and Identity

Brief description: Calcium 2-ethylhexanoate (commonly called calcium octoate) is an alkaline-earth metal carboxylate, generally formulated as Ca(C8H15O2)2, i.e., a calcium(II) center coordinated by two 2-ethylhexanoate (octanoate) ligands.

  • Item-specific identifiers (from Product Data):

    • SKU: C472850
    • CAS: 136-51-6
    • InChIKey: 208793 (as provided; truncated/incomplete; see literature below)
    • Storage Conditions: Room temperature
    • Category Path: 全部 / 可售 / 材料科学
    • Research Use Note: For research use only
  • Literature/computed identity (for reference; not item-specific):

    • Preferred name: Calcium bis(2-ethylhexanoate); “calcium octoate”
    • Molecular formula (anhydrous): Ca(C8H15O2)2 (C16H30CaO4)
    • Molecular weight (anhydrous): ~326.49 g/mol (literature calculation)
    • SMILES (one representation): CCCCC(C)CC(=O)[O-].CCCCC(C)CC(=O)[O-].[Ca+2]
    • InChIKey (one literature key): typically available in databases for Ca(2-ethylhexanoate)2; consult CAS 136-51-6 listings
  • Structural features (general description):

    • Functional groups: two carboxylate anions (R–COO–) derived from 2-ethylhexanoic acid.
    • Metal center: Ca2+; commonly exhibits ionic/coordination bonding to oxygen atoms of carboxylates; extended coordination networks possible in the solid state.
    • 2D description: Each ligand bears a branched C8 alkyl chain (2-ethyl substitution on hexanoate), conferring lipophilicity; the Ca2+ is chelated/bridged by carboxylate O donors (syn–syn or syn–anti modes).
Synthetic Utility

Functional profile (literature; not item-specific):

  • Role: Source of Ca2+ in organic media; weak Lewis acid/base pair via carboxylate ligands; lipophilic counterion enabling solubility in nonpolar solvents and polymers.
  • Transformations:
    • Transesterification/esterification catalysis in the presence of alcohols at elevated temperatures.
    • Ring-opening polymerization of cyclic esters (ε‑caprolactone, lactide) when combined with protic initiators; affords polyesters with low color and benign metal residues compared with tin.
    • Coordination assembly into Ca‑based MOFs and coordination polymers; the bulky carboxylate can template pore hydrophobicity or be exchanged post-synthetically.
    • Thermal precursor to CaO/CaCO3 nanostructures via controlled decomposition; useful in coatings, paper filling, and catalysis supports.

Practical synthetic tips:

  • Ligand exchange: Readily undergoes exchange with other carboxylic acids or alcohols; this can be used to prepare mixed carboxylate systems or calcium alkoxide-like species in situ.
  • Compatibility: Avoid strong acids (protonation liberates 2‑ethylhexanoic acid) and strong oxidants. In polar protics, activity and speciation change; monitor by IR (νas, νs COO–) and TGA/MS when relevant.
  • Workup: Nonpolar solubility allows phase separation from polar products; conversely, washing with aqueous acid removes calcium as water-soluble salts but may hydrolyze products—optimize accordingly.
  • Analytics: Track free acid content (acid number) and Ca assay to ensure reproducible catalysis.
Target Specificity

Not applicable. This product is a small-molecule metal carboxylate, not an antibody, probe, or biologic. No target/epitope specificity is defined. Refer to Reaction & Applications and Synthetic Utility for its relevant chemical roles.

Preguntas frecuentes

What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 136-51-6, the molecular formula is C16H30CaO4, and the molecular weight is 326.49 g/mol. InChIKey LTPCXXMGKDQPAO-UHFFFAOYSA-L.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.