Carboxyl-functionalized upconverting nanoparticles - Em. Wavelength:475 nm,particle size:35nm,Coating:PEG-COOHF

Cat. No.: C140941
Disponible para pedir
CALIDAD & PUREZA Em. Wavelength:475 nm,particle size:35nm,Coating:PEG-COOHF
Storage
Room temperature
Shipped In
Normal
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
5mg
C140941-5mg
Fabricado bajo pedido · 8–12 semanas

1.532,34€

1.788,32€
Guardar 255,98 € (14.31%)
Enter a quantity for the sizes you want to add.

Descripción general

This series of products contains amino functionalized NaYREF4 (RE:Yb, Er, Tm, Gd, Mn, Lu) UCNs with optimal excitation wavelength at 975 nm. The sensitizer is Yb3+, and the activator is Er3+ or Tm3+. The doping concentrations are optimized, leading to strong upconverted emissions at specific wavelengths.The nanoparticles are highly hydrophilic due to the silica coating or PEG coating. The UCNs are of high quantum efficiency and very photostable
After proper surface modification and functionalization, the products can be used for fluorescence imaging, biodetection, immunity analysis and photoactivation of anti-cancer drugs and biomolecules.

Especificaciones

Especificaciones y pureza
Em. Wavelength:475 nm,particle size:35nm,Coating:PEG-COOHF
Condiciones de almacenamiento de almacenamiento
Room temperature
Enviado en
Normal

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols

Item-specific tested applications and recommended dilutions are not provided. The following general protocols are offered as literature-based starting points; optimize for your system.

  • Dispersion and cleanup
    • Redisperse dry powder (if supplied as such) in filtered buffer (e.g., 10 mM MES or PBS), target 0.1–5 mg·mL−1. Gently bath-sonicate 5–10 min. Remove dust/aggregates by 0.45→0.22 μm syringe filtration, if particle size permits.
  • Amide conjugation (summary)
    • Activate –COOH with EDC/NHS in MES (pH 5.0–5.5, 15–30 min). Exchange to phosphate/HEPES (pH 7.4–8.0) and add amine-bearing ligand. Incubate 1–4 h RT. Quench residual NHS esters with ethanolamine. Purify by centrifugation–redispersion or SEC.
  • Printing/coating (anti-counterfeiting)
    • Prepare an ink with 1–10 mg·mL−1 UCNPs in water/glycerol or water/PEG and a suitable binder (e.g., PVA). Print by microplotter or inkjet onto coated paper or polymer films. Dry at ambient conditions; overcoat as needed.
  • Optical measurement
    • Excite at 980 or 808 nm (per dopant system; literature). Use calibrated power density (e.g., 0.1–1 W·cm−2) and collect spectra with appropriate filters to reject excitation. For imaging, long-pass filters (700–750 nm cutoff for 980 nm excitation) and bandpass filters around expected emissions (e.g., 540 nm, 655 nm for Er3+ UCNPs; literature) are typical.
  • QC checks
    • DLS/ζ-potential before and after functionalization; emission spectra under fixed conditions; gel or SEC profiles for conjugate integrity.

Item-specific application data: Not specified for this item; refer to CoA/Spec Sheet.

Biological Roles

This product is an engineered inorganic nanomaterial and has no endogenous biological role. The following points describe common research uses of carboxyl-functionalized UCNPs in the life sciences (literature/general; not product-specific, not for clinical use):

  • Bioimaging probes
    • NIR excitation yields low background autofluorescence and deep tissue penetration in small-animal and cellular imaging models. Emission lines are narrow and photostable relative to organic dyes.
  • Bioconjugation via –COOH
    • Amide coupling to antibodies, peptides, aptamers, or targeting ligands enables selective binding in vitro. Carboxyl surfaces also conjugate to amine-modified oligonucleotides for FRET/lifetime assays.
  • Sensing platforms
    • The long luminescence lifetimes of lanthanides allow time-gated detection, suppressing short-lived background. Ratiometric sensing can be implemented by monitoring multiple emission bands.
  • Phototherapeutic research (preclinical only)
    • As NIR-to-UV/visible transducers, UCNPs can drive photoactivated processes (e.g., uncaging, photocatalysis) in biological environments under NIR light. Any therapeutic use is outside the scope of this product and is not implied.
  • Biocompatibility considerations
    • Surface chemistry, size, and dosage govern cytocompatibility; robust coatings (silica, PEG) can reduce nonspecific interactions. Always validate in your system, and consult SDS and CoA for endotoxin/bioburden status if relevant.

Item-specific biological test data (cell assays, endotoxin levels, sterility): Not specified for this item; refer to CoA/Spec Sheet.

Buffer Applications

Carboxyl-functionalized UCNPs are commonly processed in buffered media. The following are general, literature-based practices for amide-coupling workflows and colloidal stability (not product specifications):

  • EDC/NHS activation buffer
    • Use 10–100 mM MES (pH 4.7–6.0). Maintain low ionic strength to preserve dispersion. Add NHS or sulfo-NHS to stabilize O-acylisourea intermediates.
  • Coupling buffer
    • After activation, transfer to 10–50 mM phosphate or HEPES buffer at pH 7.2–8.0 for reaction with amine-bearing ligands. Avoid primary amine buffers (e.g., Tris, glycine) during coupling.
  • Quenching and blocking
    • Quench remaining NHS esters with ethanolamine (10–50 mM, pH ~8.0) and/or block surfaces with BSA or PEGylated species to reduce nonspecific binding (as compatible with the application).
  • Storage buffers (general)
    • Near-neutral buffers (PBS, HEPES) with 0.01% nonionic surfactant can help maintain colloidal stability; add 0.02–0.05% sodium azide as a preservative if biological compatibility is not required. Confirm compatibility with downstream assays.
  • Practical tips
    • Filter buffers (0.22 μm) and pre-equilibrate ionic strength/pH via gradual exchange to avoid aggregation.
    • Monitor ζ-potential and hydrodynamic size after each step to ensure stability.

Item-specific buffer recommendations and concentrations: Not specified for this item; refer to CoA/Spec Sheet.

Green Alternatives

While the inorganic UCNP core is durable and reusable, greener choices mainly involve solvent selection, excitation conditions, and process design.

  • Greener process choices (general)
    • Prefer aqueous buffers (MES, acetate) for EDC/sulfo-NHS activation and conjugation; avoid DMF/DMSO unless required by cargo solubility.
    • Use DMTMM-mediated amide formation as a water-compatible alternative to carbodiimides, reducing urea byproducts and minimizing organic co-solvent.
    • Perform buffer exchanges by tangential flow filtration rather than repeated ultracentrifugation to reduce energy use and sample loss.
  • Excitation ecology (literature)
    • Nd-sensitized (808 nm) systems reduce water absorption/heating compared to 980 nm excitation, lowering thermal loads in aqueous experiments (tradeoff: often lower absolute brightness unless shell/architecture is optimized).
  • Lifecycle and reuse
    • UCNPs are photostable and can be reused in heterogeneous formats (films, beads) to reduce material throughput. Design for recovery by immobilization on supports (e.g., silica, polymers) or magnetic co-encapsulation.
  • Comparison snapshot (general)
    • Aqueous EDC/NHS vs DMF-based coupling: Aqueous routes improve worker safety and waste profile; however, some hydrophobic ligands/payloads mandate polar aprotic solvents.
    • Solid-phase immobilization vs colloidal use: Immobilization simplifies recovery and reduces nanoparticle release but may decrease accessible surface area.

Item-specific environmental certifications or solvent restrictions: Not specified for this item; refer to CoA/Spec Sheet.

Pharmaceutical Uses

This product is supplied for research use only. No pharmacopeial status or clinical application is claimed or implied.

General, non-clinical formulation roles observed in the literature (not product-specific):

  • Tracer/label in process analytics
    • UCNPs’ unique NIR-excited emission can serve as robust tracers in manufacturing research, enabling leak detection or flow visualization without UV excitation.
  • Solid dosage marking and anti-counterfeiting
    • Incorporation into polymer films, inks, or coatings provides covert luminescent signatures resistant to photobleaching.
  • Imaging agents in preclinical formulation research
    • Conjugation to biomolecules or encapsulation in carriers (micelles, liposomes, hydrogels) allows tracking of carriers in vitro and in animal models for method development. This does not constitute a therapeutic or diagnostic use claim.

Any item-specific compliance (e.g., USP/NF, ICH, residual solvent limits), sterility, or endotoxin specifications: Not specified for this item; refer to CoA/Spec Sheet.

Physical Properties

No item-specific physicochemical specifications are provided in the Product Data. The following values and behaviors are typical for carboxyl-functionalized UCNPs and are given as literature/general guidance only (not product specifications):

  • Phase/appearance: Nanocrystalline solid or colloidal dispersion; visual appearance depends on formulation and concentration (literature).
  • Melting/boiling points: Not applicable to nanoparticle ensembles; the inorganic cores are high-melting ceramics (literature).
  • Density (core, literature): NaYF4 crystalline density ~4.2–4.5 g·cm−3; hydrodynamic particle density in dispersion is effectively that of the medium due to colloidal stabilization.
  • Optical (literature, composition-dependent):
    • Excitation: Near-IR (commonly 980 nm for Yb-sensitized UCNPs; ~808 nm for Nd-sensitized systems).
    • Emission: Green (~540 nm) and red (~650–660 nm) for Er3+, blue/UV for Tm3+, others per dopant set.
    • Anti-Stokes upconversion with long photostability and narrow f–f bands.
  • Surface charge/acid–base (literature):
    • Carboxyl ligands deprotonate above pH ~5–6, imparting negative ζ-potential and water dispersibility; isoelectric point often near pH 3–4 depending on ligand density and ionic strength.
  • Solubility/dispersion behavior (literature):
    • Dispersible in water at low-to-moderate ionic strength when –COO− is prevalent; salt and multivalent cations can screen charges and induce aggregation.
    • Stable dispersions benefit from gentle sonication and the presence of small amounts of nonionic surfactant (e.g., 0.01% Tween-20) if compatible with the application.
  • Refractive index (core, literature): n ~1.46–1.49 for NaYF4 at visible wavelengths.

Item-specific values (particle size distribution, ζ-potential, carboxyl density, emission maxima/intensity) are Not specified for this item; refer to CoA/Spec Sheet.

Quality and Grades
  • Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

Interpretation and selection guidance (general for UCNPs):

  • Key quality attributes to verify on the CoA/Spec Sheet
    • Core composition and dopant levels (e.g., Yb/Er/Tm/Ho/Nd mol%).
    • Crystal phase (α vs β for NaYF4), often assessed by XRD; β-phase typically offers higher upconversion efficiency (literature).
    • Particle size distribution and polydispersity index (PDI) by TEM/DLS.
    • Surface ligand identity and –COOH density (e.g., μmol –COOH per mg or per m2), plus counterion state (–COOH vs –COO− Na+).
    • Colloidal metrics: ζ-potential at defined pH/ionic strength, concentration (mg·mL−1), and solvent/buffer system.
    • Optical performance: emission spectra under defined excitation (wavelength, power density), integrated intensity/quantum yield (if provided), and photostability testing conditions (literature encourages standardized reporting).
    • Purity/contaminants: residual organic solvents, free ligands, endotoxin/bioburden for bio-interfaces (if stated), and trace metals not part of the formulation.
  • What “carboxyl-functionalized” implies
    • Ready for carbodiimide (EDC/NHS or sulfo-NHS) coupling to primary amines on proteins, peptides, polymers, or surfaces.
    • Typically water-dispersible near neutral pH; buffering and ionic strength profoundly impact stability—verify recommended dispersion media on the CoA.
  • Batch-to-batch considerations
    • Upconversion brightness is sensitive to dopant level, shell thickness, and surface quenching; compare lots using identical optical test conditions.
    • Surface coverage and –COOH density determine coupling capacity; titer the available –COOH (e.g., TBO assay) for quantitative conjugations.
Reaction and Applications

This material is a functional nanoplatform rather than a molecular reagent. Its key “reactions” reside at the surface –COOH groups and in its photonic response.

  • Surface coupling chemistry (general/literature)
    • Carbodiimide coupling: Activate surface –COOH with EDC and NHS (or sulfo-NHS for aqueous systems) to form NHS esters; react with primary amines on proteins/peptides, dyes, polymers, or surfaces. Control pH (activation ~4.7–6.0; conjugation ~7.0–8.5) to balance reactivity and colloidal stability.
    • Alternative linkages: Form amide bonds via DMTMM (water-compatible); esterification to alcohol-bearing substrates using CDI; metal–carboxylate coordination to metal-organic frameworks or oxide surfaces.
    • Click workflows: Introduce azides/alkynes through short linkers on the –COOH surface, then perform CuAAC or SPAAC with complementary partners.
  • Upconversion-enabled applications (literature)
    • Bioimaging and biosensing: NIR excitation (980 or 808 nm) with visible/UV emission provides deep penetration, low autofluorescence, and negligible photobleaching compared to organic dyes.
    • Anti-counterfeiting inks, security pigments, and microprinting due to distinctive multi-band emission and lifetime signatures.
    • Photocatalysis/photochemistry: UCNPs as NIR-to-UV/visible transducers to drive TiO2 catalysis, photopolymerizations, or photo-uncaging under NIR light.
  • Practical considerations
    • Quantify –COOH density (e.g., TBO assay) to set stoichiometry for conjugations; inadequate control yields variable loading and performance.
    • Minimize surface quenching by conducting reactions under conditions that preserve ligand coverage and avoid high salt/low pH extremes.
    • After conjugation, remove small-molecule reagents by centrifugation–redispersion, dialysis, or size-exclusion chromatography appropriate to the particle size.
Reaction Conditions

General conditions for coupling to carboxyl-functionalized UCNPs (literature guidance; adjust empirically and verify with small-scale trials):

  • Determining stoichiometry
    • Quantify accessible –COOH by a colorimetric assay (e.g., toluidine blue O, TBO) or conductometric titration. Express loading as μmol –COOH per mg nanoparticle or per m2 surface.
  • EDC/NHS (or sulfo-NHS) amide coupling
    • Activation: Disperse UCNPs in 10–100 mM MES, pH 4.7–6.0. Add EDC (1–5 eq per –COOH) and NHS or sulfo-NHS (2–10 eq per –COOH). Stir 15–30 min at room temperature, protected from strong light.
    • Conjugation: Exchange to pH 7.2–8.5 buffer (phosphate/HEPES). Add amine-bearing ligand (1–10 eq per –COOH or to desired surface coverage). React 1–4 h at RT or overnight at 4 °C.
    • Quench: Ethanolamine 10–50 mM, pH ~8.0, 15–30 min.
    • Purification: Centrifugation–redispersion (size-appropriate g-force), dialysis, or SEC to remove small molecules.
  • DMTMM-mediated coupling (water-compatible)
    • In pH 7–8 buffers, add DMTMM at 1–3 eq per –COOH and the amine partner simultaneously; react 1–3 h at RT.
  • Colloidal stability controls
    • Keep ionic strength low during activation; add nonionic surfactant (0.01%) if aggregation is observed and compatible.
    • Use gentle bath sonication to redisperse; avoid probe-tip sonication for prolonged periods in small volumes to limit heating/metal abrasion.
  • Optical handling
    • For measurements, use constant excitation wavelength/power density (e.g., 980 nm or 808 nm, literature) and matched pathlengths; allow samples to equilibrate thermally to avoid intensity drift.

Item-specific recommended conditions: Not specified for this item; refer to CoA/Spec Sheet.

Safety and Handling
  • GHS/SDS
    • Signal word, H-statements, pictograms, and classification: Not specified for this item; refer to SDS.
    • For research use only.
  • General nanoparticle precautions (general guidance)
    • Avoid inhalation of powders/aerosols; handle solids in a fume hood or ventilated enclosure. Use respiratory protection if dust generation is possible.
    • Prevent skin/eye contact: wear lab coat, safety glasses, and appropriate gloves (e.g., nitrile). For ultrafine powders, consider double-gloving and sleeve covers.
    • Avoid generating aerosols when sonicating or pipetting colloids; keep containers closed.
  • Incompatibilities and stability (general)
    • Strong acids/bases and certain chelators can strip surface ligands, altering colloidal stability and functionality.
    • High ionic strength and multivalent cations (e.g., Ca2+, Mg2+, Fe3+, Al3+) may induce aggregation of carboxylated particles by charge screening/bridging.
    • Oxidants/reductants may affect organic surface ligands; the inorganic core is generally chemically inert under ambient conditions.
  • First-aid overview (general)
    • Inhalation: Move to fresh air; seek medical attention if symptoms occur.
    • Skin/eye contact: Rinse with water for several minutes; remove contaminated clothing; seek medical advice for persistent irritation.
    • Ingestion: Rinse mouth; do not induce vomiting; seek medical advice.
  • Spill/disposal (general)
    • Avoid dry sweeping of nanopowders; dampen and collect or use HEPA-filtered vacuum. Dispose of according to institutional and local regulations; nanoparticles may fall under special waste streams.
  • Fire safety
    • Most UCNPs are nonflammable inorganic solids; packaging/organic ligands may burn. Use extinguishing media suitable for surrounding materials. Defer to SDS for authoritative guidance.
Solvent Selection

Carboxyl-functionalized UCNPs are designed for aqueous or polar media, with dispersion behavior governed by the ionization of surface –COOH groups.

  • Polarity and miscibility (general/literature)
    • Aqueous media: Best dispersibility when –COOH is deprotonated (–COO−) at pH > ~5–6; use low-to-moderate ionic strength buffers.
    • Polar aprotic solvents (DMF, DMSO, NMP): Useful for carbodiimide or other coupling chemistries when water is incompatible with payloads; stability depends on ligand set.
    • Alcohols (EtOH, i-PrOH): May be used in mixed systems; excessive alcohol can reduce electrostatic stabilization and promote aggregation.
  • Buffer compatibility (general)
    • Activation of –COOH with EDC/NHS is typically performed in MES or other non-amine buffers at pH 4.5–6.0. Avoid primary amine buffers (Tris, glycine) during activation.
    • For storage/handling, PBS or HEPES at pH 7.2–7.4 with 0.01% nonionic surfactant can help maintain colloids, provided this suits the downstream application.
  • Choosing UCNPs vs alternative surface chemistries
    • –COOH vs –NH2 vs PEG: Carboxyl surfaces offer robust covalent linkage to amines; amine-terminated particles favor coupling to –COOH payloads; PEGylated surfaces maximize antifouling but limit coupling density.
  • Practical tips
    • Pre-filter buffers (0.22 μm) and degas if performing sensitive optical measurements.
    • Adjust ionic strength and pH gradually to avoid shock-induced aggregation; use stepwise dialysis or tangential flow for buffer exchange.
    • If aggregation occurs, try gentle bath sonication (not probe-tip in small volumes to avoid heating/metal shedding) and reduce salt concentrations.
Storage and Reconstitution
  • Storage conditions (from Product Data)
    • Store at room temperature. Shipped under normal conditions.
  • Item-specific physical form, stabilizers, and shelf life: Not specified for this item; refer to CoA/Spec Sheet.

General guidance (for carboxyl-functionalized UCNPs; adapt to actual form on CoA):

  • If supplied as a dry powder
    • Keep tightly sealed in a desiccator at ambient temperature, protected from dust and moisture. Avoid prolonged exposure to high humidity, which can affect surface ligands.
    • Reconstitute in filtered, degassed buffer or water at the desired concentration (e.g., 0.1–5 mg·mL−1). Gently bath-sonicate 5–10 min to achieve a uniform dispersion.
  • If supplied as an aqueous dispersion
    • Store at room temperature as specified; minimize microbial growth with a compatible preservative if allowed (e.g., 0.02–0.05% sodium azide) or by sterile technique.
    • Avoid repeated freeze–thaw cycles; aliquot if necessary. Gentle mixing or short bath sonication can restore dispersion after settling.
  • Compatibility cautions
    • Avoid strong acids/bases and high ionic strength, which can strip ligands or induce aggregation. Prevent contact with primary amines during storage if NHS-activated intermediates are present.
  • Stability monitoring
    • Periodically check hydrodynamic size and emission intensity under fixed conditions. Visible aggregation, large DLS shifts, or intensity loss may indicate the need for buffer exchange or reconditioning.

For any reconstitution factors, preservatives, or concentration ranges specific to this SKU: Not specified for this item; refer to CoA/Spec Sheet.

Structure and Identity

Carboxyl-functionalized upconverting nanoparticles (UCNPs) are inorganic nanocrystals whose surfaces are terminated with carboxyl (-COOH) groups for covalent bioconjugation and materials assembly.

  • Item-specific identifiers
    • CAS: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES / InChI / InChIKey: Not applicable to heterogeneous nanoparticle ensembles; Not specified for this item; refer to CoA/Spec Sheet.
  • Structural features (general/literature)
    • Core: Lanthanide-doped fluoride or oxide crystalline core (commonly hexagonal β-NaYF4 doped with Yb3+/Er3+, Yb3+/Tm3+, or Nd3+/Yb3+/Er3+; literature), responsible for anti-Stokes upconversion under NIR excitation.
    • Shell (optional, literature): Epitaxial inert shells (e.g., NaYF4 or NaYF4:Ca) often used to suppress surface quenching and enhance brightness.
    • Surface chemistry: A ligand layer presenting terminal -COOH groups. These may arise from adsorbed short ligands (e.g., citric acid), polymer brushes (e.g., poly(acrylic acid), carboxylated PEG), or silica coatings bearing carboxyl silanes (literature). The –COOH groups enable carbodiimide coupling to primary amines and coordination to metal ions/oxides.
    • Morphology: Typically quasi-spherical or rod-like nanocrystals with a core diameter in the tens of nanometers (literature). The hydrodynamic size exceeds the core size due to the ligand/corona and any solvation layer.
  • 2D/“line” description
    • Best represented as an inorganic crystalline sphere/rod (lanthanide-doped host lattice) coated by an organic corona exposing terminal carboxyl groups to the medium.
Synthetic Utility

Although not a small-molecule reagent, carboxyl-functionalized UCNPs serve as versatile building blocks in materials synthesis and surface engineering.

  • Modular conjugation hub
    • –COOH enables robust amide formation with –NH2 substrates (proteins, polymers, dendrimers), providing a route to tailored coronas, targeting ligands, or crosslinkable handles.
  • Layer-by-layer (LbL) assembly
    • Electrostatic assembly with polyelectrolytes (e.g., PAH/PAA) or covalent LbL via carbodiimide chemistry supports film/coating fabrication with tunable optical responses.
  • Hybrid composites and catalysis
    • Embedding UCNPs in silica, PMMA, PEG hydrogels, or MOFs creates NIR-responsive composites. Carboxylates can chelate/anchor metal ions or TiO2, enabling NIR-driven photocatalysis via upconverted UV/visible emission.
  • Patterning and printing
    • Carboxyl surfaces aid dispersion in aqueous inks for microcontact printing, inkjet, or aerosol jet deposition. Post-pattern crosslinking via amide formation locks features in place.
  • Retrosynthetic perspective
    • UCNPs function as “photoactive scaffolds” in device-level syntheses: select core (host/dopants), add passivation shell, introduce a carboxylated interlayer, then append function-specific ligands. Each layer controls optical efficiency, stability, and interfacial chemistry.

Item-specific synthetic compatibilities (temperature limits, solvent windows, shell thickness): Not specified for this item; refer to CoA/Spec Sheet.

Target Specificity

This product is not an antibody or affinity reagent. No target specificity, clone, isotype, or species reactivity applies.

  • Item-specific antigen/epitope data: Not applicable.
  • If functionalized with targeting ligands by the user (e.g., antibodies, peptides), specificity will be dictated entirely by the conjugated moiety and its density/orientation on the UCNP surface.

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.