This compound belongs to the class of organic compounds known as pyridines and derivatives. These are compounds containing a pyridine ring, which is a six-member aromatic heterocycle which consists of one nitrogen atom and five carbon atoms.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reseñas
Reseñas de cliente
Application Protocols
No biological assay protocols apply. For synthetic use, consider the following general workflow under inert atmosphere (literature/general):
Inert handling: Flame-dry glassware; backfill with argon. Charge dry solvent and base; add catalyst; then add Diethyl(3-pyridyl)borane via syringe/glovebox.
Coupling setup: Combine electrophile (e.g., aryl bromide), catalyst (1–5 mol%), base (2–3 equiv), and solvent (THF/toluene or dioxane). Heat 60–80 °C with stirring under argon.
Quench and work-up: Cool, then add aqueous NH4Cl or NaHCO3 cautiously. Extract with EtOAc or MTBE, dry, and concentrate. Purify by silica gel chromatography.
These steps are general guidance only. Adjust stoichiometry and conditions to your specific substrates and consult peer-reviewed procedures.
Biological Roles
This product is a synthetic organoborane reagent and is not intended for biological assays.
General note (literature)
The 3-pyridyl fragment is prevalent in ligands and small molecules used in chemical biology, but the tri-coordinate borane itself does not have a defined biological role. Organoboranes are typically reactive toward biomolecules and are not used in vivo.
Practical guidance
If the target application is preparation of 3-pyridyl-containing probes or ligands, use this reagent purely as a synthetic intermediate and purify products thoroughly to remove boron residues prior to any biological testing.
No medical or clinical claims are made; for research use only.
Buffer Applications
Not typically applicable. Diethyl(3-pyridyl)borane is air- and moisture-sensitive and not used to prepare aqueous buffer systems. For work-up of reactions, aqueous buffers (e.g., phosphate or bicarbonate) may be used after complete quench/oxidation, but the reagent itself should not contact water until the intended quench step.
Green Alternatives
Greenness considerations focus on stability, waste minimization, and solvent/catalyst choices.
Comparing nucleophiles for 3-pyridyl cross-coupling (literature/general)
| Option | Stability | Reactivity | Typical Waste | Comments |
|---|---|---|---|---|
| Diethyl(3-pyridyl)borane | Air/moisture sensitive | High after base activation | Low-moderate (borates) | Enables rapid transmetallation; requires inert handling |
| 3-Pyridylboronic acid | Bench-stable (prone to protodeboronation in water at high T) | Moderate | Borates | Easier handling; compatible with aqueous solvents |
| 3-Pyridyl pinacol boronate (BPin) | Bench-stable | Moderate–high with appropriate base | Borates | Broad solvent compatibility; good shelf life |
| 3-Pyridyl MIDA boronate | Very stable, solid | Slower, requires deprotection | Borates + MIDA residues | Excellent for storage and iterative synthesis |
| Organostannanes | Stable | High | Toxic Sn waste | Avoid due to toxicity and disposal burden |
Greener process tips
Use ethanol/water or 2-MeTHF as coupling media when catalyst systems permit.
Favor Pd at ppm levels or use Ni/Fe catalysts shown to couple aryl boron reagents with reduced precious-metal loading (literature-dependent).
Replace chlorinated solvents with toluene, CPME, or Me-THF where feasible.
Selection trade-offs: The borane offers reactivity but at the cost of handling risk and potential for off-spec due to hydrolysis. For routine library synthesis, BPin/MIDA esters are often greener choices.
Pharmaceutical Uses
Formulation/excipient role: None. This reagent is not an excipient and is not formulated for administration.
Process chemistry relevance (literature/general): 3-Pyridyl motifs are common in drug candidates; this organoborane can serve as a coupling partner to build such motifs during API intermediate synthesis, after which boron residues are removed during purification.
Pharmacopeia status: Not listed; no compendial monograph.
For research and process development use only; not for human or animal use.
Physical Properties
Item-specific values
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet. (Computed literature value given below.)
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet. (Computed literature value given below.)
Physical state: organoboranes of this class are often oils or low-melting solids and are typically air- and moisture-sensitive (literature, qualitative).
Solubility: expected to be soluble in nonpolar and moderately polar aprotic solvents (e.g., hexane, toluene, THF, ether); insoluble in water due to hydrolytic instability (literature, qualitative).
Acid/base behavior: Lewis acidic at boron; pyridine nitrogen is basic but typically not protonated under neutral conditions (literature, qualitative).
Values not provided for this item (do not infer)
Boiling point, melting point, density, refractive index, vapor pressure, UV cutoff, water/peroxide/metal content, partition coefficients: Not specified for this item; refer to CoA/Spec Sheet.
Note: Handle and measure physical properties for your lot under inert atmosphere to avoid hydrolysis/oxidation artifacts during characterization.
Quality and Grades
Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
General considerations for this class of reagent
Organoborane quality is often assessed by 1H/13C/11B NMR, GC/HPLC area%, and trace water content (Karl Fischer). If your application is cross-coupling, low protodeborylation/byproduct content is important.
UV-absorbance grade (e.g., HPLC grade solvents) is not typically relevant; however, low peroxide content in coordinating solvents used for handling (THF, ether) is recommended to avoid side reactions.
Stabilizers: None specified for this item. Some air-sensitive boranes are supplied in hydrocarbon solution to enhance stability; check your CoA if applicable.
Practical QC tips
Verify integrity by 11B NMR (tri-coordinate boranes typically resonate between +20 to +80 ppm) and by 1H/13C NMR under inert conditions.
If using for Suzuki–Miyaura coupling, a quick test coupling against a standard aryl bromide with Pd(dppf)Cl2 and K3PO4 can benchmark reactivity.
For authoritative batch-specific specifications (purity %, residual solvents, stabilizers), consult the CoA/Spec Sheet.
Reaction and Applications
Cross-coupling (literature/general)
Under Pd catalysis and base, tri-coordinate arylboranes can engage in Suzuki–Miyaura coupling. The base forms an aryl boronate “ate” species that transmetallates to Pd(II). Typical electrophiles: aryl/vinyl halides or pseudohalides.
The 3-pyridyl motif is common in agrochemistry and materials; using the borane allows access to 3-pyridyl–aryl C–C bonds.
Oxidation to alcohols (post-hydroboration paradigm)
While dialkyl(aryl)boranes are less typical hydroboration adducts, the boron center can be oxidized (H2O2/NaOH) to transform B–C bonds adjacent to alkyl substituents; for aryl–B, oxidation yields the corresponding phenol only after prior functionalization—less common but possible via directed protocols.
Electrophilic trapping and functional group interconversion
Formation of tetracoordinate borate complexes with alkoxides/fluoride can enable subsequent coupling or migration processes.
Conversion to boronic esters (e.g., pinacol) in situ can provide a more stable, isolable intermediate for downstream chemistry.
Pyridine-directed transformations
The pyridyl nitrogen can coordinate metals or boron, occasionally affecting regioselectivity and rates in metal-catalyzed couplings or electrophilic substitutions at boron (literature observations).
Practical tips
Maintain rigorous exclusion of air/moisture; charge reagents via glovebox or cannula.
For couplings, pre-form the ate-complex by adding base (e.g., K3PO4, Cs2CO3) in the reaction medium before heating.
Monitor by GC or HPLC; 11B NMR can diagnose boron speciation during optimization.
Reaction Conditions
General guidance from literature for arylborane couplings and interconversions (non-specification):
Suzuki–Miyaura coupling (representative)
Catalyst: 1–5 mol% Pd(dppf)Cl2·DCM or Pd(PPh3)4; NiCl2(dppp) for some aryl chlorides.
Base: K3PO4, K2CO3, Cs2CO3, or NaOH; 2–3 equiv relative to boron species.
Solvent: Toluene/THF, dioxane, or CPME; 0–30% water may be included once in reactor to facilitate boronate formation (do not pre-mix with the neat reagent).
Temperature/Time: 50–90 °C for 2–16 h depending on substrate.
Atmosphere: Inert (N2/Ar). Charge the borane under glovebox/Schlenk; degas solvent by sparging or freeze–pump–thaw.
Conversion to pinacol boronate
Reagents: Pinacol (1.1–1.5 equiv), base (e.g., NEt3) or mild oxidant-free conditions; anhydrous THF or toluene; rt–50 °C.
Oxidation work-up (where applicable)
H2O2 (30%) with NaOH in THF/H2O at 0–25 °C; quench cautiously. Note: aryl–B oxidation to phenols may require specific conditions and is less common than for alkyl–B.
Monitoring and analysis
11B NMR to track conversion from trigonal boron (positive δ) to borate (negative δ) during base activation; LC/GC for product quantitation.
These are typical literature conditions; optimize for your substrate set and consult current references.
Safety and Handling
Item-specific hazard information
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
GHS Classification/Pictograms: Not specified for this item; refer to SDS.
Storage Conditions: Store at 2–8 °C, Argon charged (Product Data). Shipments are on wet ice.
General safety guidance for organoboranes (literature/general)
Reactivity: Tri-coordinate organoboranes are typically air- and moisture-sensitive; exposure to humid air can lead to hydrolysis and evolution of flammable gases and boron-containing byproducts.
Fire and flammability: Combustible; handle away from ignition sources. Although less volatile than trialkylboranes, dialkyl(aryl)boranes can still present fire risks if decomposed or misted.
PPE: Use chemical-resistant gloves (e.g., nitrile), splash goggles, lab coat. Employ an inert-atmosphere glovebox or Schlenk techniques.
Engineering controls: Work in a fume hood with inert gas purge when transferring; ensure moisture-scrubbed inert gas lines.
First aid (overview; defer to SDS): Eye/skin contact—immediately flush with water for ≥15 min and remove contaminated clothing; inhalation—move to fresh air, monitor breathing; ingestion—rinse mouth, seek medical attention. Provide SDS to responders.
Spill response: Quench small residues cautiously under inert atmosphere using anhydrous alcohol followed by aqueous base, or cover with dry, inert absorbent. Avoid water contact during initial containment.
Always consult the product SDS for definitive hazard classification, response measures, and disposal guidance.
Solvent Selection
This reagent is best handled and reacted in dry, oxygen-free, aprotic media.
Miscibility and polarity (literature/general)
Good solubility expected in hydrocarbons (hexane, toluene) and ethereal solvents (Et2O, THF). Avoid water and alcohols unless performing a controlled quench or base-activated coupling.
Coordinating ethers (THF) can stabilize boron centers and often enhance homogeneity in catalytic cross-couplings.
Practical choices by task
Storage/transfer: Dry hexane or toluene under argon minimizes hydrolysis.
Cross-coupling: Toluene/THF or dioxane/water mixtures under basic conditions are common; the water fraction is introduced only in the reactor under base/Pd to form the active boronate—do not pre-dilute the reagent with water.
Electrophile additions or oxidations: Anhydrous THF, toluene, or CH2Cl2 are typical.
Comparison (general)
Diethyl(3-pyridyl)borane vs 3-pyridylboronic acid/pinacol ester:
Borane: higher nucleophilicity at boron, often more reactive in ate-complex formation; more air/moisture sensitive.
Boronic acid/ester: bench-stable, broader solvent tolerance; sometimes slower to transmetallate without activation.
Select solvent based on compatibility with your catalyst/base system and your lab’s inert-atmosphere capabilities.
Keep tightly sealed under an inert gas blanket. Minimize headspace oxygen and moisture; use PTFE-lined caps.
Recommended to handle in a glovebox or via Schlenk techniques. If supplied neat, consider preparing a stock solution (e.g., in dry toluene or hexane) under argon to facilitate measured transfers.
Protect from light and heat; avoid repeated warming/cooling cycles that can draw in moist air.
Reconstitution/use
If provided as a neat liquid or solid: use as received under inert atmosphere; if viscous at 2–8 °C, allow to equilibrate to room temperature under argon before dispensing.
If provided in solution: verify concentration on CoA; rinse container with small aliquots of the same dry solvent to ensure quantitative transfer.
Stability note
Air/moisture exposure can lead to hydrolysis and loss of activity. Record opening date and consider small-aliquoting under argon for multi-use scenarios.
For lot-specific stability and concentration information, refer to the CoA/Spec Sheet.
Structure and Identity
Brief overview: Diethyl(3-pyridyl)borane is a tri-coordinate organoborane comprising a 3-pyridyl substituent and two ethyl groups bound to boron; a Lewis-acidic, air/moisture-sensitive reagent useful in cross-coupling after activation.
Item-specific identifiers (from Product Data)
SKU: D122653
Product Name: Diethyl(3-pyridyl)borane
CAS: 89878-14-8
CID: 642851
InChIKey: 259584 (as provided)
Storage note: Store at 2–8 °C, Argon charged; shipped on wet ice
SMILES (literature-style): CCBc1cccnc1 (tri-coordinate B attached to 3-pyridyl and two ethyls)
Core structural features: one six-membered aromatic heterocycle (pyridine) para- and ortho- to the B–C bond at the 3-position; boron is trigonal planar (sp2-like) and Lewis acidic; no stereocenters.
2D description in words: a pyridine ring substituted at the meta (3-) position by a boron atom that also bears two ethyl groups; the ring nitrogen is not coordinated to B under standard representations, though intramolecular interaction is possible in certain conformations.
Not specified for this item; refer to CoA/Spec Sheet for any authoritative item-specific structural confirmations (e.g., NMR, elemental analysis, HRMS).
Synthetic Utility
Functional group profile
Tri-coordinate boron (Lewis acidic) bound to an sp2 3-pyridyl carbon and two sp3 ethyl groups.
Capable of forming tetracoordinate borates with bases/alkoxides/fluoride, enabling transmetallation.
Key transformations (literature/general)
Suzuki–Miyaura cross-coupling to form 3-pyridyl–aryl/vinyl C–C bonds under Pd or Ni catalysis after base activation (ate-complex formation).
Conversion to boronic esters (e.g., pinacol) for storage or alternate coupling manifolds.
Electrophile-induced migration at boron (boron-to-carbon 1,2-migrations) in specialized contexts.
Oxidative elaboration of B–C bonds under peroxide/base, where applicable.
Retrosynthetic value
Provides a 3-pyridyl synthon complementary to halopyridines: instead of using 3-bromopyridine as electrophile, this reagent allows the 3-pyridyl fragment to be the nucleophilic partner, useful when the partner electrophile is complex/sensitive.
Compatibility notes
Tolerates many functional groups on the coupling partner (esters, nitriles, amides) under optimized Pd conditions; avoid strongly protic media prior to base activation.
The pyridine nitrogen can chelate catalysts; ligand choice (e.g., dppf, SPhos, t-Bu3P) can mitigate potential inhibition.
Target Specificity
Not applicable. This product is a small-molecule organoborane reagent and is not an antibody, enzyme, or biologic. No target, epitope, clone, or species reactivity is associated with this item.
Utilizamos cookies para garantizar el correcto funcionamiento del sitio web y, cuando esté permitido, para mejorar su experiencia. Puede gestionar sus preferencias en cualquier momento en Configuración. Más información en nuestra Política de Cookies.
¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?
Recordármelo más tarde
¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.