DiSBAC2(3) Membrane Potential Fluorescent Probe - BioReagent, ≥95%(HPLC) , CAS No.47623-98-3

CAS: 47623-98-3 Cat. No.: D1454922 Fórmula: C19H24N4O4S2 Peso molecular: 436.548 Beilstein Registry Number: 1232950 Número EC: 256-325-5 PubChem CID: 23212271
Disponible para pedir
CALIDAD & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. ≥95%(HPLC)
Synonyms
DiSBAC2(3)|Bis(1,3-diethylthiobarbituric acid)trimethine oxonol|Bis(1,3-diethylthiobarbiturate)trimethineoxonol|DiSBAC2|Bis-(1,3-diethylthiobarbiturate) trimethine oxonol|4,6(1H,5H)-Pyrimidinedione, 5-(3-(1,3-diethylhexahydro-4,6-dioxo-2-thioxo-5-pyrimidinyl)-2-propenylidene)-1,3-diethyldihydro-2-thioxo-|Bis-(1,3-diethylthiobarbituric acid)trimethine oxonol
Storage
Protected from light,Store at -20°C,Desiccated
Shipped In
Ice chest + Ice pads
Application
Cell Staining, Fluorescence Analysis
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
1mg
D1454922-1mg
Fabricado bajo pedido · 8–12 semanas
78,01€
5mg
D1454922-5mg
Fabricado bajo pedido · 8–12 semanas
164,78€
10mg
D1454922-10mg
Fabricado bajo pedido · 8–12 semanas
260,23€
25mg
D1454922-25mg
Fabricado bajo pedido · 8–12 semanas
520,56€
Enter a quantity for the sizes you want to add.

Descripción general

DiSBAC2(3) is a permeable anionic phospholipid fluorescent dye sensitive to membrane potential. Its distribution across the cell membrane depends on the membrane potential; thus, changes in its fluorescence intensity can reflect alterations in membrane potential. Upon cell depolarization, the dye permeates into the cell, increasing intracellular fluorescence intensity. During cell hyperpolarization, the dye is extruded from the cell, resulting in reduced fluorescence intensity.

This probe belongs to slow-response membrane potential probes, whose optical response amplitude is far larger than that of fast-response probes (typically a 1% fluorescence change per mV). Therefore, DiSBAC2(3) penetrates cell membranes faster and exhibits higher sensitivity to shifts in membrane potential. It is suitable for detecting rapid membrane potential fluctuations, such as spontaneous electrical activity, ion channel permeability, average membrane potential variations in non-excitable cells induced by drug binding and other factors. Carrying an overall negative charge, DiSBAC2(3) is excluded by mitochondria, making it more ideal for plasma membrane potential measurement than carbocyanine dyes.

Physical Properties & Specifications

Excitation wavelength (Ex, nm) ………………538

Emission wavelength (Em, nm) ………………555

Notes: Solubility data was measured at room temperature; low temperature may impair solubility.

Additional Safety Instructions

For personal safety and health, laboratory coats and disposable gloves must be worn during all handling procedures.

Experimental Protocol (For Reference Only)

1. Cell Preparation

1.1 Adherent cells: Plate cells one day prior to detection. The recommended seeding density for 96-well plates is 4–8×10⁴ cells per well in 100 μL medium.

1.2 Suspension cells: Centrifuge the cell pellet and resuspend cells in HBSS and MP staining working solution (see Step 2.2 below). Adjust cell density to 1.25–2.5×10⁵ cells per well in 100 μL for 96-well plates.

2. Preparation of DiSBAC2(3) Staining Working Solution

2.1 Dissolve the dye powder in anhydrous DMSO to prepare a stock solution at a concentration of 10–30 mM DiSBAC2(3).

Caution: Use the prepared stock solution promptly. Aliquot any remaining stock, store at −20 °C protected from light, and avoid repeated freeze-thaw cycles.

2.2 Prepare 2× DiSBAC2(3) dye solution: Equilibrate the dye stock solution to room temperature. Dilute the stock with HHBS or other appropriate buffer to a final concentration of 20–40 μM to obtain 2× DiSBAC2(3) dye solution. Prepare a mixture containing 0.04–0.08% Pluronic F-127 (pH 7) and 2 mM trypan red; thoroughly combine with the 2× dye solution to yield the complete staining working solution. This working solution remains stable for a minimum of 2 hours at room temperature.

3. Membrane Potential Measurement

3.1 Add 100 μL of DiSBAC2(3) staining working solution per well (96-well plate) to the cells.

Note 1: If your screening compounds interfere with culture medium or serum, and cells can grow normally in serum-free medium, replace the growth medium with an equal volume of HHBS buffer before adding DiSBAC2(3) dye.

Note 2: Do not wash cells after staining.

3.2 Incubate cells in a cell incubator for 30–60 minutes.

Caution: Room-temperature incubation for 30–60 minutes may yield superior results under certain experimental conditions.

3.3 Prepare compound plates using HHBS or your required buffer system.

3.4 Quantify membrane potential by measuring fluorescence intensity at Ex/Em = 540/590 nm.

Stock Solution Preparation

Important Warnings

• This product is supplied non-sterile. If used for cell culture, perform pre-treatment to remove pyrogens and bacteria in advance to prevent microbial contamination.

• Only partial technical information can be provided for some products. The company does not warrant the authority or accuracy of the provided data; all values are for research reference and academic communication only.

Especificaciones

Sinónimos
DiSBAC2(3) | Bis(1,3-diethylthiobarbituric acid)trimethine oxonol | Bis(1,3-diethylthiobarbiturate)trimethineoxonol | DiSBAC2 | Bis-(1,3-diethylthiobarbiturate) trimethine oxonol | 4,6(1H,5H)-Pyrimidinedione, 5-(3-(1,3-diethylhexahydro-4,6-dioxo-2-thioxo-5-pyrimidinyl)-2-propenylidene)-1,3-diethyldihydro-2-thioxo- | Bis-(1,3-diethylthioba Show more
Especificaciones y pureza
BioReagent, ≥95%(HPLC)
Estabilidad y almacenamiento
Store at -20℃ long term (36 months). Store in the dark. Desiccated.
Condiciones de almacenamiento de almacenamiento
Protected from light,Store at -20°C,Desiccated
Enviado en
Ice chest + Ice pads
Este producto requiere envío en cadena de frío. Los servicios terrestres y otros servicios económicos no están disponibles.
Grado
BioReagent
Pureza
≥95%(HPLC)
Product Line
Productos biológicos
Nombres e identificadores
Sonrisas canónicas
CCN1C(=O)C(C(=O)N(C1=S)CC)C=CC=C2C(=O)N(C(=S)N(C2=O)CC)CC
IUPAC Name
5-[(E)-3-(1,3-diethyl-4,6-dioxo-2-sulfanylidene-1,3-diazinan-5-yl)prop-2-enylidene]-1,3-diethyl-2-sulfanylidene-1,3-diazinane-4,6-dione
InChIKey
VJYNRXFXHKIGLT-MDZDMXLPSA-N
INCHI
1S/C19H24N4O4S2/c1-5-20-14(24)12(15(25)21(6-2)18(20)28)10-9-11-13-16(26)22(7-3)19(29)23(8-4)17(13)27/h9-12H,5-8H2,1-4H3/b10-9+
Isómeros SMILES
CCN1C(=O)C(C(=O)N(C1=S)CC)/C=C/C=C2C(=O)N(C(=S)N(C2=O)CC)CC
PubChem CID
23212271
Peso molecular
436.548
Beilstein
1232950

Datos avanzados

Taxonomic Classification

Taxonomy Tree

KingdomOrganic compounds
SuperclassOrganoheterocyclic compounds
ClaseDiazines
SubclassPyrimidines and pyrimidine derivatives
Intermediate Tree Nodes Pyrimidones
Direct ParentThiobarbituric acid derivatives
Alternative Parents Diazinanes  1,3-dicarbonyl compounds  Thioureas  Carboxylic acids and derivatives  Azacyclic compounds  Organopnictogen compounds  Organonitrogen compounds  Organic oxides  Hydrocarbon derivatives  
Molecular FrameworkAliphatic heteromonocyclic compounds
Substituents Thiobarbiturate - 1,3-dicarbonyl compound - 1,3-diazinane - Thiourea - Azacycle - Carboxylic acid derivative - Organic nitrogen compound - Organic oxygen compound - Organopnictogen compound - Organic oxide - Hydrocarbon derivative - Organosulfur compound - Organooxygen compound - Organonitrogen compound - Carbonyl group - Aliphatic heteromonocyclic compound
DescripciónThis compound belongs to the class of organic compounds known as thiobarbituric acid derivatives. These are organic compounds containing a 2-thioxodihydropyrimidine-4,6(1H,5H)-dione skeleton.
External Descriptors Not available
Estructura 3D
Modelo de Estructura Química Interactiva





Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

3 results found

Lot NumberCertificate TypeFechaArticulo
ZJ26F0838394ZJ26F0838394Certificate of AnalysisAug 25, 2026 D1454922
ZJ26F0838393ZJ26F0838393Certificate of AnalysisAug 25, 2026 D1454922
ZJ26F0838392ZJ26F0838392Certificate of AnalysisAug 25, 2026 D1454922
Propiedades químicas y físicas
SolubilidadSoluble in DMSO
Preguntas frecuentes y artículos
Calculadoras de soluciones
Reseñas

Reseñas de cliente

¿Necesita ayuda para elegir la calidad?

Nuestra guía de selección de calidades cubre la pureza, el estado del estabilizador y la idoneidad de la aplicación para todas las variantes de nuestro catálogo.

Ver la guía de calidades BioReagent →

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.