Fibronectin (FN), CAS No.86088-83-7

CAS: 86088-83-7 Cat. No.: np330969 Número EC: 289-149-2
Disponible para pedir
CALIDAD & PUREZA Bioactive ? Bioactive grade — verified to retain biological activity in functional assays. Use when the molecule must be functionally active, not just pure. ActiBioPure™ ? ActiBioPure™ — Aladdin's premier line for bioactive and recombinant products. Use when both high purity and preserved biological activity are required. Native ? Native grade — protein/biomolecule in its natural (non-recombinant, non-denatured) form. Use when native structure and activity are required. High Performance ? High-performance grade with optimized purity and performance characteristics. Use for sensitive analyses where ordinary grades fall short. Sterile ? Sterile grade — processed and verified free of viable microorganisms. Use directly in aseptic procedures and cell culture without further sterilization. ≥90%(SDS-PAGE) from Human plasma
Accession #
P02751
Bioactivity
Human Fibronectin has been tested for its ability to promote attachment and spreading using BHK-21 cells.
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
50μg
np330969-50μg
Fabricado bajo pedido · 8–12 semanas
104,04€
250μg
np330969-250μg
Fabricado bajo pedido · 8–12 semanas
260,23€
1mg
np330969-1mg
Fabricado bajo pedido · 8–12 semanas
520,56€
5mg
np330969-5mg
Fabricado bajo pedido · 8–12 semanas
1.301,52€
Enter a quantity for the sizes you want to add.

Descripción general

Fibronectin is a broad range natural cell adhesion factor. It is a 440-500 kDa dimeric glycoprotein consisting of two similar 220-250 kDa subunits linked by two disulfide bonds. It is found as a dimer in plasma and in multimeric form in the extracellular matrix and on cell surfaces. Its primary function is related to cell adhesion to the extracellular matrix which occurs via the Arg-Gly-Asp-Ser (RGDS) sequence of fibronectin with the appropriate transmembrane integrin receptor of the cells. Other domains of fibronectin are also involved with this adhesion process and may involve interaction with collagen, heparin and other cell surface glycosaminoglycans. The conformation and orientation of adsorbed fibronectin is also important and has an effect on cell spreading and strength of adhesion of endothelial cells. 

This product is used as a thin coating on tissue-culture surfaces to promote attachment, spreading, and proliferation of a variety of cell types. The principal functions of fibronectin appear to be in cellular migration during wound healing and development, regulation of cell growth and differentiation, and haemostasis/thrombosis. 

Fibronectin addition to serum free medium promotes cell adhesion. More significant effects are observed with BHK, CHO and other cell lines by coating of cultureware with fibronectin at 1-5 ug/cm².

Quality

  • Purity ≥90% (SDS-PAGE)
  • Tested for ability to promote attachment and spreading of BHK-21 cells
  • Found negative for bacteria, fungi, and mycoplasma

Source: Human plasma. 

NOTE: The source plasma was tested and found nonreactive for hepatitis B surface antigen (HBsAg) and negative for antibodies to human immunodeficiency virus (HIV), hepatitis C virus (anti-HCV), and syphilis (RPR). Nevertheless, this product should be handled using the same safety precautions used when handling potentially infectious material.

RECONSTITUTION & USE: 

TO ENSURE PROPER SOLUBILITY OF HFN THIS RECONSTITUTION PROCEDURE MUST BE FOLLOWED. 

Equilibrate vial to room temperature.  Resuspend in sterile distilled water to a concentration of 1mg/ml. Allow 30 minutes for material to go into solution. DO NOT AGITATE OR SWIRL. If entire amount of material is not to be used immediately, transfer into appropriate aliquots and store at −20°C. It is recommended that solubilized product is used within two weeks. DO NOT STORE IN FROST-FREE FREEZER. AVOID MULTIPLE FREEZE THAWS. 

Human Fibronectin is generally used in the concentration range of 1-5 micrograms per cm² of growth surface for attachment or at 5 micrograms per ml as a media additive. 

Coating Procedure

Use these recommendations as guidelines to determine the optimal coating conditions for your culture system.

  1. Dilute fibronectin to desired concentration using serum-free culture Ca²⁺, Mg²⁺ free medium or buffer at pH 7-9. The final solution should be sufficiently dilute so that the volume added will cover the surface evenly. Example: If the final coating concentration will be 5 µg/cm², dilute the material to 50 µg/ml and add 1 ml/35 mm dish, 3 ml/60 mm dish, etc. NOTE: Because of the CAPS component in the HFN preparation, buffers of media containing Ca²⁺ and/or Mg²⁺ added to the HFN may result in the formation of insoluble metal hydroxides. This will not occur if the buffering capacity of the diluent brings the pH to 8.0 or lower.
  2. Add appropriate amount of diluted fibronectin to culture surface.
  3. Incubate at room temperature for 1 hour.
  4. Aspirate remaining material.
  5. Rinse plates carefully with dH₂O - avoid scraping bottom surface.
  6. Plates are ready for use. They may also be stored at 2-8°C damp or air dried if sterility is maintained.

Especificaciones

Product Name
Fibronectin (FN), CAS No.86088-83-7
Sinónimos
Fibronectin Human | Human Fibronectin Native Protein | Human Fibronectin | Fibronectin, Human Plasma | Human Plasma Fibronectin | Fibronectin, human | Fibronectin Human Protein, Plasma | FN1 | FN | CIG | FNZ | MSF | ED-B | FINC | GFND | LETS | GFND2 | SMDCF
Grado
ActiBioPure™, Bioactive, Esteriles, High Performance, Native
Especificaciones y pureza
Bioactive, ActiBioPure™, Native, High Performance, Sterile, ≥90%(SDS-PAGE), from Human plasma
Mecanismos bioquímicos y fisiológicos
Fibronectins bind cell surfaces and various compounds including collagen, fibrin, heparin, DNA, and actin. Fibronectins are involved in cell adhesion, cell motility, opsonization, wound healing, and maintenance of cell shape. Involved in osteoblast compaction through the fibronectin fibrillogenesis cell-mediated matrix assembly process, essential for osteoblast mineralization (By similarity). Participates in the regulation of type I collagen deposition by osteoblasts (By similarity). Acts as a ligand for the LILRB4 receptor, inhibiting FCGR1A/CD64-mediated monocyte activation. Anastellin: Binds fibronectin and induces fibril formation. This fibronectin polymer, named superfibronectin, exhibits enhanced adhesive properties. Both anastellin and superfibronectin inhibit tumor growth, angiogenesis and metastasis. Anastellin activates p38 MAPK and inhibits lysophospholipid signaling. Secreted by contracting muscle, induces liver autophagy, a degradative pathway for nutrient mobilization and damage removal, and systemic insulin sensitization via hepatic ITGA5:ITGB1 integrin receptor signaling. Features: Showing features for site, dna binding. Post-translational: Sulfated. It is not known whether both or only one of Thr-2155 and Thr-2156 are/is glycosylated. Forms covalent cross-links mediated by a transglutaminase, such as F13A or TGM2, between a glutamine and the epsilon-amino group of a lysine residue, forming homopolymers and heteropolymers (e.g. fibrinogen-fibronectin, collagen-fibronectin heteropolymers).By SimilarityPhosphorylated by FAM20C in the extracellular medium. Proteolytic processing produces the C-terminal NC1 peptide, anastellin. Some lysine residues are oxidized to allysine by LOXL3, promoting fibronectin activation and matrix formation.By SimilaritySerotonylated on Gln residues by TGM2 in response to hypoxia.
Bioactividad
Human Fibronectin has been tested for its ability to promote attachment and spreading using BHK-21 cells.
Número de adhesión
Peso molecular previsto
440 kDa
CAS
86088-83-7
Tipo de molécula
Proteína
Product Line
Productos biológicos
Almacenamiento y envío
Concentración
from Human plasma
Reconstitución
Equilibrate vial to room temperature. Resuspend in sterile distilled water to a concentration of 1mg/ml. Allow 30 minutes for material to go into solution. DO NOT AGITATE OR SWIRL. If entire amount of material is not to be used immediately, transfer into appropriate aliquots and store at -20°C. It is recommended that solubilized product is used within two weeks. DO NOT STORE IN FROST-FREE FREEZER. AVOID MULTIPLE FREEZE THAWS.
Condiciones de almacenamiento de almacenamiento
Store at 2-8°C
Enviado en
Wet ice
Estabilidad y almacenamiento
Store at 2-8℃ long term. DO NOT FREEZE. Upon reconstitution, it is recommended to aliquot. Avoid freeze/thaw cycle.

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Citations of This Product
Calculadoras de soluciones
Reseñas

Reseñas de cliente

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.