This compound belongs to the class of organic compounds known as cholines. These are organic compounds containing a N,N,N-trimethylethanolammonium cation.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Propiedades químicas y físicas
Peso molecular
394.5
XLogP3
Hydrogen Bond Donor Count
1
Hydrogen Bond Acceptor Count
2
Rotatable Bond Count
17
Exact Mass
393.261 Da
Monoisotopic Mass
393.261 Da
Topological Polar Surface Area
20.200 Ų
Heavy Atom Count
23
Formal Charge
0
Complexity
216.000
Isotope Atom Count
0
Defined Atom Stereocenter Count
0
Undefined Atom Stereocenter Count
0
Defined Bond Stereocenter Count
0
Undefined Bond Stereocenter Count
0
The total count of all stereochemical bonds
0
Covalently-Bonded Unit Count
2
Calculadoras de soluciones
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reseñas
Reseñas de cliente
Application Protocols
No vendor-tested application protocols are specified for this item; refer to primary literature and method SOPs. The following are general, non-validated examples for planning purposes only.
Preparing aqueous stock solutions (general)
Slowly add the solid to room-temperature deionized water with stirring to reach the desired concentration; gentle warming (≤40 °C) can aid dissolution. Filter (0.22 µm) if clarity is required.
Biphasic PTC reaction setup (general)
Charge reactor with organic substrate/solvent and aqueous base; add 0.5–2 mol% of the surfactant; stir vigorously (interfacial emulsion). Monitor by GC/LC; separate phases and recover the aqueous phase for reuse.
Mesoporous silica templating (general)
Dissolve surfactant in water–ethanol, add TEOS under base catalysis with stirring; age to form ordered mesophases; isolate the solid and remove surfactant by calcination or solvent extraction.
These outlines are illustrative only and must be adapted/validated for your specific system and safety requirements.
Biological Roles
Scope: This product is a synthetic cationic surfactant for laboratory/materials use. It has no endogenous biological role.
General biological interactions of quaternary ammonium surfactants (literature; not product-specific)
Membrane interactions: Cationic headgroups bind to negatively charged phospholipids and cell surfaces; hydrophobic tails insert into lipid bilayers, disrupting membrane integrity at sufficient concentrations.
Protein interactions: Can denature or precipitate proteins via electrostatic binding and hydrophobic interactions; effects depend on ionic strength and pH.
Nucleic acids: Electrostatic complexation with DNA/RNA enables condensation and can be used in research for layer-by-layer films; cytotoxicity considerations apply in cellular contexts.
Biodegradation/tox profile (general)
Many long-chain quats are only slowly biodegradable and exhibit aquatic toxicity; always prevent environmental release and manage waste accordingly.
Note: No medical or clinical uses are claimed. For research use only (per Product Data).
Buffer Applications
This compound is not a buffer and is not typically used to set pH. However, it is sometimes included in buffered systems for its surfactant properties.
General research uses in buffered media (literature; not item specification)
Protein and membrane work: Cationic surfactants can solubilize membranes but often denature proteins; nonionic/zwitterionic surfactants are usually preferred. If used, keep concentrations near/just above CMC and validate protein integrity.
Electrophoresis/micelles: While SDS (anionic) is standard, cationic surfactants are used in cationic PAGE systems at acidic pH; method-specific optimization required.
Antifouling/wetting: Low levels can reduce surface fouling or adjust zeta potential in electrophoretic and chromatographic systems.
Practical notes
Prepare fresh stock solutions in water or aqueous alcohol; filter (0.22 µm) if needed for particulate-sensitive applications.
Avoid mixing with anionic surfactants or polyanions in buffers to prevent precipitation/phase separation.
For pH buffering requirements, select an appropriate buffer (e.g., phosphate, HEPES, acetate) and then evaluate compatibility with this cationic surfactant.
Green Alternatives
Cationic quaternary ammonium surfactants are effective but can present aquatic toxicity and persistence concerns. Consider greener options when feasible.
Comparative options (general; literature)
Alkyl polyglucosides (APGs): Nonionic, sugar-derived, readily biodegradable; good for emulsification but lack cationic charge—less effective for anionic surface binding and PTC.
Betaine/zwitterionic surfactants (e.g., cocamidopropyl betaine): Lower toxicity and good foaming; milder toward proteins; not cationic, so different interaction profile.
Shorter-chain or biodegradable cationics (e.g., esterquats): Retain positive charge but incorporate ester linkages for hydrolytic degradability; may not match micelle/template parameters of C16 quats.
Ionic liquids/switchable surfactants: Tunable, sometimes recyclable; assess toxicity and lifecycle impacts.
Tradeoffs
Performance vs environment: Cationics excel at binding anionic substrates and PTC; greener nonionics/zwitterionics may require higher loadings or co-additives to achieve similar outcomes.
Use micellar catalysis to reduce organic solvent volumes.
Recycle aqueous surfactant phases where possible.
Optimize loading to just above CMC/effective critical aggregation concentration.
Evaluate wastewater treatment for quats (e.g., adsorption on activated carbon, ion-exchange) to mitigate aquatic discharge.
Pharmaceutical Uses
No therapeutic or clinical claims are made for this product. It is supplied for research use only.
General formulation roles of quaternary ammonium surfactants (literature; not item specification)
Preservative/antimicrobial excipient in topical/non-sterile products (class-level behavior), subject to strict regulatory evaluation of safety and efficacy.
Emulsifier and antistatic agent in certain nonparenteral formulations and device-processing steps.
Permeation enhancement and mucoadhesion have been reported for cationic surfactants in research settings; applicability depends on toxicity and regulatory limits.
Considerations
Pharmacopeial status, specific acceptance criteria, residuals, and impurity profiles would need to be verified for any GMP use; none are specified for this item.
Interaction with anionic actives/excipients can cause incompatibility; conduct compatibility studies.
For any regulated use, obtain detailed specifications, residual amine limits, bioburden/endotoxin data, and perform risk assessment. This catalog item is for research use only.
Physical Properties
Item-specific (from Product Data)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Storage conditions: Room temperature (as provided)
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Literature/general properties (for reference; not item specification)
Physical state: Typically a waxy solid or crystalline powder at ambient conditions (common for C16 quaternary ammonium bromides)
Ionic character: Permanently cationic (quaternary ammonium) with bromide counterion
Solubility: Generally soluble in water and lower alcohols (e.g., ethanol, isopropanol); limited solubility in nonpolar hydrocarbons; enhanced solubility in water above the critical micelle concentration (CMC)
Amphiphilicity: Strongly amphiphilic; forms micelles, vesicles, and lyotropic liquid crystalline phases depending on concentration and temperature
Partitioning: Effective interfacial activity stemming from long n-alkyl tail and cationic headgroup; binds to anionic surfaces (clays, silica, membranes)
Thermal behavior: Quaternary ammonium bromides with C16 tails typically melt well above room temperature and may show chain-melting transitions; thermal decomposition precedes boiling.
Not provided here (consult literature/CoA): precise melting point, density, refractive index, logP, pKa (not applicable for quaternary centers), UV cutoff, water/peroxide/metal specifications.
Quality and Grades
Item-specific (from Product Data)
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers/inhibitors: Not specified for this item; refer to CoA/Spec Sheet.
Guidance on grades (general; not item specification)
Research grade: Suitable for most synthesis, templating, and materials applications; typical assays report assay purity, moisture, and halide content.
High-purity/materials grade: Targeted for nanomaterials templating, electrochemistry, or surfactant self-assembly studies; may include stringent limits on alkyl-distribution, residual amines, and halides.
Chromatography grade solutions: For applications needing defined UV background or conductivity, pre-made aqueous stock solutions (filtered/low particulates) can be advantageous.
What to check on this product’s CoA
Assay (%), residual tertiary amines, moisture (Karl Fischer), bromide/halide assay, color/APHA, and particle size or solution clarity.
Trace metals and bioburden/endotoxin only if relevant to your use (e.g., colloid/electrochemical systems).
Note: When unspecified, do not assume water, peroxide, or metal specifications—verify on the item CoA/Spec Sheet.
Reaction and Applications
This quaternary ammonium bromide is a versatile cationic surfactant for interfacial catalysis and soft-templating in materials science.
Facilitates transport of anionic nucleophiles (e.g., CN−, N3−, halides) from aqueous base into organic phases, enabling SN2 alkylations, substitutions, and condensations under mild conditions.
Compared with shorter-chain quats, the C16 tail enhances interfacial area and micelle stability, often boosting rates.
Practical tips: Maintain vigorous stirring to renew interface; add electrolyte (e.g., NaCl) to salt out organics; control temperature to avoid gel phases at high surfactant loadings.
Micellar/aqueous-organic reaction media
Promotes micellar catalysis for reactions of hydrophobic substrates in water, lowering organic solvent usage; can concentrate reactants within micelle cores.
Soft templating for porous materials
Serves as a structure-directing agent for mesoporous silica/oxides; surfactant micelles or liquid-crystalline phases template hexagonal/cubic pore architectures. Removal by calcination or solvent extraction yields high-surface-area materials.
Colloids and nanostructures
Stabilizes emulsions/miniemulsions; directs anisotropic growth (e.g., nanorods/nanoplates) by selective facet adsorption in wet-chemical synthesis.
Surface modification
Adsorbs on negatively charged substrates (silica, clays, graphene oxide), enabling layer-by-layer assembly, dispersant functions, and tuning of zeta potential.
Note: Specific application performance depends on grade, counterion purity, and solution conditions; optimize surfactant concentration relative to CMC and ionic strength.
Reaction Conditions
General literature guidance (not product-specific; optimize for your system):
Temperature: Ambient to 80 °C depending on substrate; monitor to avoid phase gelation at high surfactant levels.
Notes: Add electrolyte (NaCl) to influence partitioning; maintain pH for anion generation; quats can be reused in the aqueous phase.
Micellar catalysis in water
Solvent: Water or water–alcohol; surfactant concentration just above CMC; optional co-solvent (≤20% v/v ethanol) to dissolve hydrophobic substrates.
Temperature: 20–60 °C typical; higher temperatures reduce solution viscosity and can change aggregate structure.
Mesoporous silica templating
Precursors: Alkoxysilanes (e.g., TEOS) in water–alcohol with base (NH3 or NaOH) or acid catalysis.
Conditions: 20–40 °C aging to form ordered micelle arrays; surfactant/Si ratio tunes pore size; removal by calcination (e.g., 500–550 °C in air) or solvent extraction (acidified ethanol).
Nanoparticle synthesis
Use as capping/shape-directing agent in aqueous or alcoholic media with metal precursors; reduction at 0–80 °C depending on system; ionic strength and halide impact morphology.
Yields, kinetics, and optimal loadings are highly system-dependent; consult primary literature and perform small-scale optimization.
Safety and Handling
Item-specific (from Product Data)
GHS classification, signal word, H-statements, pictograms: Not specified for this item; refer to SDS.
Storage: Room temperature (per Product Data)
General safety guidance for quaternary ammonium bromide surfactants (literature; not item specification)
Hazards: Quaternary ammonium surfactants commonly cause skin and eye irritation; may be harmful if swallowed; hazardous to aquatic organisms with long-lasting effects. Always consult the item-specific SDS for authoritative data.
PPE: Use lab coat, safety glasses or face shield, and appropriate chemical-resistant gloves (e.g., nitrile). Handle powders in a fume hood to avoid aerosol/dust inhalation.
Handling: Avoid generating dust; prevent contact with skin/eyes; do not breathe dust/mist. Wash thoroughly after handling.
Incompatibilities: Strong oxidizing agents may react; anionic surfactants can form inactive ion pairs/precipitates (loss of function); avoid mixing with strong bases/acids without evaluation.
First aid (overview): Eye contact—rinse cautiously with water for several minutes; Skin—wash with soap/water; Inhalation—move to fresh air; Ingestion—rinse mouth, seek medical advice. Follow SDS.
Spills: Avoid dry sweeping; use damp methods or HEPA vacuum to minimize dust; collect for disposal according to local regulations.
Fire: Quats are typically not highly volatile; use water spray, foam, CO2, or dry chemical. Thermal decomposition can release nitrogen oxides, HBr/Br-containing fumes—firefighters wear SCBA.
Environmental: Prevent release to drains/waterways; quats exhibit aquatic toxicity—contain and dispose properly.
Solvent Selection
As a long-chain cationic surfactant salt, solvent choice depends on whether you need monomers, micelles, or ordered phases.
Polarity and miscibility (literature; general)
Water: Readily soluble up to CMC; forms micelles and, at higher concentrations, lyotropic liquid crystals. Ionic strength and temperature shift CMC and phase behavior.
Alcohols (MeOH, EtOH, i-PrOH): Typically soluble; useful for preparing stock solutions and film casting on substrates.
Polar aprotics (DMSO, DMF): Usually soluble and good for blending with water to modulate aggregation.
Nonpolar solvents (hexane, toluene): Poor solubility; often requires co-solvents or formation of reverse micelles with additives.
Selection guidance
For micellar catalysis/PTC in biphasic organic–aqueous systems: Use water/organic combinations where the surfactant partitions to the interface (e.g., toluene–water, CH2Cl2–water) with base/electrolyte to promote ion transfer.
For templating mesoporous oxides: Aqueous/alkanol media (e.g., water–ethanol) aid control over micelle size and silica precursor hydrolysis.
For thin films and coatings: Alcoholic solutions spin- or dip-coat uniformly, then solvent-evaporate to induce ordering.
Quick comparison (general)
Water vs alcohol: Water maximizes ionic headgroup hydration and micellization; alcohols reduce water activity and can lower CMC/order parameters; mixed solvents tune domain spacing.
Storage and Reconstitution
Item-specific (from Product Data)
Storage conditions: Room temperature
Shipped in: Not specified for this item; refer to CoA/Spec Sheet.
General guidance (not item specification)
Container: Tightly closed, moisture-resistant container to minimize caking and water uptake. Protect from contamination.
Shelf life: Quaternary ammonium salts are typically stable at ambient conditions; verify retest date on CoA.
Reconstitution: Dissolve in deionized water or lower alcohols (e.g., ethanol) to make stock solutions; prepare fresh for sensitive applications or filter-sterilize if needed.
Freeze–thaw: Not applicable to dry solid; for aqueous stocks, store at 2–8 °C and avoid repeated freeze–thaw by aliquoting.
Incompatibilities during storage: Avoid contact with strong oxidizers and anionic surfactants that may cause precipitation; keep away from strong acids/bases unless intended for use.
Always consult the product label and CoA/SDS for definitive storage and handling instructions.
Structure and Identity
Brief: Hexadecyl(2-hydroxyethyl)dimethylazanium bromide is a cationic quaternary ammonium surfactant featuring a C16 alkyl chain, two methyl substituents, and a 2‑hydroxyethyl group on the nitrogen, paired with bromide as the counterion.
Item-specific (from Product Data)
SKU: H991748
CAS: 20317-32-2
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Literature/general identity (for reference; not item specification)
Structural features: one long, linear n-hexadecyl chain (hydrophobic tail); quaternary ammonium center (permanently cationic) bearing two methyl groups and one 2-hydroxyethyl substituent; monovalent bromide counterion.
2D description in words: a tetravalent nitrogen at the center is bonded to (i) an n‑C16H33 chain, (ii) CH3, (iii) CH3, and (iv) CH2–CH2–OH; a separate Br− anion balances charge. No stereocenters.
Note: Exact identifiers (InChI, SMILES) and any alternate salt forms should be confirmed on the item CoA/Spec Sheet.
Synthetic Utility
Phase-transfer catalysis (PTC)
The permanently charged ammonium head with a hydrophobic C16 tail enables shuttling of anions from aqueous base into organic phases, accelerating SN2 substitutions, alkylations, and condensations under biphasic conditions.
The 2‑hydroxyethyl substituent can modulate hydration and interfacial properties relative to trimethyl analogs, sometimes affecting selectivity and rate.
Micellar catalysis
Provides hydrophobic microenvironments in water, concentrating substrates and catalysts; can lower activation barriers and reduce the need for organic solvents.
Structure-directing agent (SDA)
Acts as a templating surfactant for synthesizing mesoporous silica/oxides (e.g., hexagonal arrays) where pore size correlates with alkyl chain length and assembly conditions.
Ion-pair chemistry
Forms tight ion pairs with nucleophiles (e.g., halides, carboxylates), altering reactivity and extraction behavior; useful in separations and analytical sample prep.
Surface modification
Adsorbs strongly to anionic solids, enabling layer-by-layer film growth, colloid stabilization/flocculation control, and surface energy tuning for coatings and printing.
Practical tips
Remove residual surfactant from products by solvent extraction, ion exchange, dialysis, or calcination (for inorganic frameworks).
For organic syntheses, minimize residual quats in products to simplify purification and avoid foaming.
Target Specificity
Not applicable. This product is a small-molecule surfactant, not a biological targeting reagent or antibody. No antigen/epitope or species reactivity applies.
Preguntas frecuentes
What is the purity of this product?
This product is supplied at ≥95% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 20317-32-2, the molecular formula is C20H44BrNO, and the molecular weight is 394.500 g/mol. InChIKey GGDGVDMTSZPOIB-UHFFFAOYSA-M.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Utilizamos cookies para garantizar el correcto funcionamiento del sitio web y, cuando esté permitido, para mejorar su experiencia. Puede gestionar sus preferencias en cualquier momento en Configuración. Más información en nuestra Política de Cookies.
¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?
Recordármelo más tarde
¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.