LC pH Gradient Buffer A - BioReagent

Cat. No.: L1523264
Disponible para pedir
CALIDAD & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
6.1g
L1523264-6.1g
Fabricado bajo pedido · 8–12 semanas
416,43€
Enter a quantity for the sizes you want to add.

Descripción general

pH gradient buffer is an innovative elution buffer (or mobile phase) that changes pH linearly for separation and purification of mAb antibodies, glycoproteins and PTM modified proteins by ion exchange (IEX) chromatography. In pH gradient buffer-based IEX chromatography, the pH of the initial buffer is kept at a constant level to ensure that the charged proteins bind to oppositely charged ions of the stationary phase. Then, the protein is eluted by linearly changing the pH of the buffer so that the protein has a zero net charge and can elute from the column. Reagent Composition: Each bottle contains 2.5 mg BT Surfactant, 850 mg NaCl, and 6 g sulfonate. Resuspension: Dissolve reagents in 500 mL deionized, double-distilled water. pH Adjustment: At room temperature, use pH meter to ensure the pH error is less than 0.2, and use 2 M NaOH or hydrochloric acid to adjust the pH. Elution Buffer (mAb): pH Buffer A, pH 5.5 Elution Buffer B (mAb): pH Buffer B, pH 10.2 Linear pH Range: Linear correlation coefficient > 0.99 at pH 5.5 - 10.2 in columns of IEX chromatography. Reference Procedure of mAb subunit and intact protein: Column: SCX, 10 μm, 2.1 * 250 mm or 2.1 * 50 mm Flow rate: 0.3 mL/min Eluent A: 1×mAb pH buffer A (pH 5.5) Eluent B: 1× mAb pH Buffer B (pH 10.2) Gradient: 0 - 1 min, 0% B; 1 - 31 min, 0 - 100% B; 31 - 34 min, 100% B; 34 - 40 min, 0% B Temperature: 30 °C FLR detection: Ex: 280 nm, Em: 360 nm UV detection: 280 nm Load: 0.2 - 10 μg Inject volume: 4 μL

Especificaciones

Especificaciones y pureza
BioReagent
Condiciones de almacenamiento de almacenamiento
Store at -20°C
Enviado en
Ice chest + Ice pads
Este producto requiere envío en cadena de frío. Los servicios terrestres y otros servicios económicos no están disponibles.
Grado
BioReagent
Product Line
Productos biológicos

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Preguntas frecuentes

What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

¿Necesita ayuda para elegir la calidad?

Nuestra guía de selección de calidades cubre la pureza, el estado del estabilizador y la idoneidad de la aplicación para todas las variantes de nuestro catálogo.

Ver la guía de calidades BioReagent →

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.