m TEC Agar - BioReagent

Cat. No.: M1528491
Disponible para pedir
CALIDAD & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
250g
M1528491-250g
Fabricado bajo pedido · 8–12 semanas
121,40€
Enter a quantity for the sizes you want to add.

Descripción general

For thermotolerant coliform membrane filtration enumeration

Especificaciones

Especificaciones y pureza
BioReagent
Condiciones de almacenamiento de almacenamiento
Room temperature
Enviado en
Normal
Grado
BioReagent
Product Line
Productos biológicos

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols

Not specified for this item; refer to the product label, CoA/Spec Sheet, and your laboratory SOPs.

Note: While generic literature protocols exist for membrane filtration onto selective/differential media, Aladdin provides no item-specific tested protocol details in the current listing. Validate conditions (sample volume, filtration, incubation temperature/time, confirmation steps) within your lab.

Biological Roles

This product itself has no biological role; it is a selective/differential culture medium used to support or inhibit microbial growth under defined conditions.

Literature context on target organism and principle:

  • Indicator organism: Thermotolerant Escherichia coli is widely used in environmental microbiology as an indicator of recent fecal contamination. Its growth at elevated temperature differentiates it from many other coliforms.
  • Differentiation principles: Selective agents inhibit Gram-positive and many non-coliform bacteria; differential components yield distinctive colony appearances for presumptive identification of E. coli after incubation at elevated temperature. Specific agents vary by formulation and supplier and are not specified for this item.
  • Research utility: Enables quantitative assessment (colony-forming units per volume) via membrane filtration for water and environmental samples in research settings.

No claims are made regarding diagnostic or clinical use. For exact organism performance claims (growth/inhibition specifications), consult the lot-specific CoA or performance certificate if provided.

Buffer Applications

Not typically applicable. This product is a complete microbiological medium rather than a buffering reagent. If a defined buffer is required for your workflow (e.g., sample dilution/rinse), prepare and validate a separate buffer solution according to the relevant standard method.

Green Alternatives

Sustainability considerations for culture media focus on resource efficiency and waste reduction rather than solvent replacement.

  • Media choice: Depending on research goals, alternative chromogenic E. coli agars or enzyme-based methods can reduce confirmatory testing steps, potentially lowering consumable use and energy spent on reincubation (literature).
  • Process efficiency:
    • Use energy-efficient autoclave cycles sized to load (validated for sterility) to minimize steam and power consumption.
    • Prepare only the volume needed to reduce waste of agar-containing plates.
    • Consider reusable glassware and membrane funnels where contamination control allows.

Example comparison (literature; non-exhaustive):

  • m-TEC agar: Elevated incubation temperature; membrane filtration workflow; visual differentiation based on indicator system.
  • Chromogenic E. coli media: Often provide direct color readout of β-glucuronidase-positive colonies at standard incubation temperatures; may simplify confirmation steps. Tradeoffs include different selectivity spectra and licensing/cost considerations.

Packaging/waste: Consolidate orders to reduce shipment frequency. Dispose of used media via autoclave decontamination to avoid chemical disinfectants where appropriate.

Pharmaceutical Uses

Not applicable as a pharmaceutical excipient. This product is intended for research and laboratory microbiology workflows only. It may be used in environmental monitoring research or method development contexts but is not manufactured or specified here for GMP pharmaceutical production. Verify regulatory and compendial requirements separately if considering use in validated QC environments.

Physical Properties

Item-specific properties for this dehydrated medium are not provided.

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility: Dehydrated media are intended to be dissolved in purified water upon preparation (general literature).
  • pH (prepared medium): Not specified for this item; refer to CoA/Spec Sheet. (Typical media specify a target pH measured at 25 °C; see label/CoA.)
  • Density, refractive index, logP, bp/mp: Not applicable/Not specified for complex media powders; refer to CoA/Spec Sheet.

General preparation behavior (literature):

  • Medium dissolves upon heating/stirring in water; agar gels upon cooling after sterilization/pouring.
  • Final gel strength and clarity depend on agar type, concentration, and salts. Precipitation or haze can result from overheating or incorrect water quality.

Note: Do not treat literature characteristics as specifications. For precise numbers (grams per liter, pH setpoint, gel strength), follow the product label and CoA.

Quality and Grades
  • Item grade: BioReagent (from Product Data). This designation indicates suitability for biological and life-science laboratory workflows, emphasizing low levels of inhibitory contaminants and consistent lot-to-lot performance for routine research applications.

What BioReagent typically implies (general):

  • Raw materials and processing geared toward compatibility with microbial culture and biochemical workflows.
  • Reasonable control of ash/ion content and inhibitors that might affect microbial growth or indicator performance, though not necessarily to clinical/diagnostic or GMP standards.

Item-specific notes:

  • Stabilizers, UV cutoffs, trace metals, moisture: Not specified for this item; refer to CoA/Spec Sheet.
  • Lot documentation: For media, consult the CoA/specification for target pH of the prepared medium, recommended preparation mass per liter, and performance criteria (e.g., qualitative growth/inhibition on challenge strains).

Use case alignment:

  • Suitable for research-grade microbial detection/enumeration studies (e.g., water quality research, environmental monitoring research). For regulated testing, verify required compliance with relevant standards and methods before use.
Reaction and Applications

Chemical reaction applications do not apply to this product; it is not a reagent for synthetic chemistry.

Microbiological application (literature, general):

  • Purpose: m-TEC-type agar is used for the selective and differential detection/enumeration of thermotolerant Escherichia coli by membrane filtration following incubation at elevated temperature (commonly 44–45 °C). It supports target growth while suppressing non-target flora.
  • Typical workflow: Filter a measured volume of water sample through a 0.45 µm membrane; place the membrane on the prepared m-TEC agar surface; incubate at an elevated temperature to select for thermotolerant E. coli; enumerate characteristic colonies.
  • Selectivity/differentiation: Achieved via selective agents (e.g., bile salts, surfactants) and visual indicators (redox or chromogenic substrates) depending on formulation. Exact agents and concentrations vary by manufacturer—consult the product’s CoA/specification.
  • Research contexts: Environmental microbiology, water quality research, method development/validation studies, and microbial ecology where thermotolerant E. coli is used as an indicator organism.

Notes:

  • Follow method-specific incubation temperatures and times defined by your laboratory protocol or governing standard. Do not treat the above as item specifications.
Reaction Conditions

Not applicable to chemical reactions.

Microbiological incubation conditions (literature, general guidance—not item specifications):

  • Membrane filtration assays targeting thermotolerant E. coli commonly incubate at 44–45 °C for a defined period per the governing method, after which presumptive E. coli colonies are enumerated based on characteristic appearance.
  • Exact incubation temperature, duration, and any confirmation steps (e.g., transfer to confirmatory media) must follow your laboratory protocol or the relevant standard (method-specific). These parameters are not specified for this item; consult the product label/CoA and your SOPs.
Safety and Handling
  • GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to SDS.
  • General hazards (literature): Dehydrated culture media are typically low acute toxicity but may cause irritation to eyes, skin, or respiratory tract due to dust. Avoid inhalation/ingestion. Handle as a laboratory chemical.
  • Microbiological safety: Once prepared and inoculated, plates/broths may contain live microorganisms. Treat all used media as biohazardous waste; decontaminate by autoclaving before disposal, consistent with institutional biosafety procedures.
  • PPE: Laboratory coat, safety glasses, and appropriate gloves. Use a dust mask or work in a ventilated area if dust generation is possible.
  • Incompatibilities: Avoid strong oxidizers and strong acids/bases during storage. During preparation, use only deionized/RO water and clean glassware to prevent contamination.
  • First aid (overview; defer to SDS): If inhaled—move to fresh air. Skin contact—wash with soap and water. Eye contact—rinse cautiously with water for several minutes; remove contact lenses if present. If ingested—rinse mouth. Seek medical attention if symptoms persist.
  • Thermal handling: Exercise caution when autoclaving and pouring hot agar; use heat-resistant PPE.

Always consult the product SDS for authoritative safety information and local regulatory requirements.

Solvent Selection

This product is a dehydrated microbiological medium intended for preparation with purified water only.

  • Primary solvent: Deionized or distilled water (literature best practice).
  • Miscibility: Not applicable; the hydrated medium forms an aqueous gel upon cooling due to agar.
  • Polarity/dielectric considerations: Not relevant—medium is used as a solidified aqueous matrix for microbial culture.

Practical guidance (literature):

  • Use Type II/III reagent-grade water. High conductivity or residual disinfectants (chlorine/chloramine) can impair performance.
  • Heat with stirring to fully dissolve prior to sterilization. Avoid localized scorching.

When to choose alternatives:

  • If non-gelling formulations or different selectivity/differential properties are required, select an alternate medium designed for the target organism and method (e.g., chromogenic E. coli media, m-Endo for total coliforms).
Storage and Reconstitution
  • Storage (as supplied): Room temperature (from Product Data). Protect from moisture. Keep container tightly closed.
  • Shipping: Shipped under normal conditions (from Product Data).
  • Shelf life: Not specified for this item; refer to CoA/Spec Sheet.

Reconstitution/preparation (general literature guidance; not item specifications):

  • Use purified water. Weigh the mass per liter specified on the product label/CoA for this exact formulation.
  • Suspend powder in water with stirring and heat to dissolve fully. Avoid overheating or prolonged boiling.
  • Sterilize as directed on label (commonly by autoclaving if applicable). Cool to ~45–50 °C, mix gently, and pour plates. Allow to solidify on a level surface. Dry plates as required before use to minimize surface moisture.
  • For membrane filtration workflows, warm plates to incubation temperature before use to reduce condensation. Incubate inverted.

Post-preparation handling:

  • Store poured plates at 2–8 °C in sealed sleeves to prevent desiccation (general practice) and use within the timeframe recommended by your lab/SOP. Discard if contamination, dehydration, or color/clarity deviations are observed.

Research use note: For research use only (from Product Data).

Structure and Identity

This product is a prepared microbiological medium (dehydrated powder) formulated for membrane filtration assays targeting thermotolerant Escherichia coli (commonly referred to as m-TEC agar).

  • Item nature: complex mixture of peptones, nutrients, salts, selective/differential agents, and gelling agent (agar). There is no single molecular structure or unique chemical identity.
  • Molecular formula: Not applicable to complex media; Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not applicable to complex media; Not specified for this item; refer to CoA/Spec Sheet.
  • CAS, InChIKey, SMILES: Not applicable to complex media; Not specified for this item; refer to CoA/Spec Sheet.
  • Structural features (descriptive): A heterogeneous blend of low– to medium–molecular-weight organics (amino acid/peptide hydrolysates, carbohydrates) and inorganic salts dispersed in an agar polysaccharide matrix when prepared. No defined stereochemistry at the product level.

Literature context (general): m-TEC-type media are designed to be selective and differential for thermotolerant E. coli following incubation at elevated temperature (≈44.5 °C), often incorporating inhibitors against non-target flora and chromogenic or redox indicators to visualize target colonies. Exact composition varies by manufacturer and formulation; consult the product’s CoA/specification for definitive details.

Synthetic Utility

Not applicable. This product is not a building block or reagent for chemical synthesis; it is a complex culture medium used for microbial cultivation and enumeration in research settings. For chemical transformations or reagent selection, refer instead to pure chemicals or defined buffers/solvents.

Target Specificity

No item-specific target specificity data are provided. Generally, m-TEC-type media are designed for selective recovery and differentiation of thermotolerant Escherichia coli in membrane filtration assays (literature). For definitive organism performance claims, refer to the product’s CoA/Spec Sheet and your validated method.

¿Necesita ayuda para elegir la calidad?

Nuestra guía de selección de calidades cubre la pureza, el estado del estabilizador y la idoneidad de la aplicación para todas las variantes de nuestro catálogo.

Ver la guía de calidades BioReagent →

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.