Plain Agar - BioReagent

Cat. No.: P1528422
Disponible para pedir
CALIDAD & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
250g
P1528422-250g
Fabricado bajo pedido · 8–12 semanas
104,04€
Enter a quantity for the sizes you want to add.

Descripción general

Contains 0.1% potassium dihydrogen phosphate, for purification of pathogenic Aeromonas hydrophila, and may also be used for cultivation of other bacteria

Especificaciones

Especificaciones y pureza
BioReagent
Condiciones de almacenamiento de almacenamiento
Room temperature
Enviado en
Normal
Grado
BioReagent
Product Line
Productos biológicos

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols
  • Item-specific (Product Data)

    • Manufacturer protocols are not provided; the following are literature-based examples for laboratory use.
  • Example 1: LB agar plates (literature/general)

    • Components (per liter): LB broth base as specified by recipe; agar 15 g (1.5% w/v).
    • Procedure: Dissolve LB base and agar in water; adjust pH per recipe; heat to boiling with stirring until clear; autoclave at 121 °C, 15–20 min. Cool to 50–55 °C, add sterile antibiotic if required, mix gently, and pour 20–25 mL per 90 mm plate. Allow to solidify; dry plates briefly before storage at 2–8 °C (if your workflow requires cold storage) in sealed bags to minimize dehydration.
  • Example 2: Soft agar overlays for plaque/antibiotic diffusion assays (literature/general)

    • Components: Nutrient or tryptic soy broth with 0.5–0.7% (w/v) agar.
    • Procedure: Prepare and sterilize as above. Maintain molten overlays at 45–50 °C. Mix with inoculum as protocol dictates and overlay onto pre-solidified base agar plates.
  • Example 3: Plant tissue culture medium solidification (literature/general)

    • Components: MS basal salts with vitamins, sucrose (e.g., 20–30 g/L), agar 7–9 g/L (0.7–0.9% w/v).
    • Procedure: Dissolve components, adjust pH (commonly ~5.7), add agar, heat to dissolve, autoclave 121 °C for 15–20 min. Cool to ~50 °C and pour into sterile vessels.

Note: Optimize volumes, temperatures, and supplements per your organism/assay. Follow institutional sterile technique practices.

Biological Roles
  • Item-specific (Product Data)

    • Biological role claims specific to this item: Not specified; for research use only.
  • Literature/general context

    • Source biology: Agar is extracted from red algae cell walls where agarans provide structural integrity.
    • Microbial metabolism: Most bacteria and fungi cannot metabolize agar; select marine microbes encode agarases capable of hydrolyzing agarose into oligosaccharides.
    • Biocompatibility: Generally inert toward common laboratory microbes and cultured plant tissues; provides a physical scaffold without significant nutrient contribution.
    • Interactions: Charged substituents in agaropectin can weakly interact with proteins, dyes, or cationic species, potentially affecting diffusion in specialized assays.
    • Environmental aspect: Biodegradable under conditions supporting agarolytic organisms.

No clinical/therapeutic roles are implied; usage is restricted to laboratory research workflows.

Buffer Applications
  • Applicability statement

    • Agar is not a buffering agent and provides negligible intrinsic buffering capacity.
  • Practical, related uses (literature/general)

    • As a gelling component, agar is combined with buffered media (e.g., phosphate- or Tris-buffered microbiological media) to maintain pH during culture.
    • Typical approach: Adjust medium pH to target (commonly pH 6.8–7.4 for many bacterial media, or per specific recipe) before autoclaving with agar; fine adjustments, if needed, are made prior to pouring plates.

For buffer formulation details (pH ranges, buffer recipes), consult the buffer component’s documentation; agar primarily provides physical structure.

Green Alternatives
  • Sustainability profile (general)

    • Agar is renewable and bio-based, sourced from red macroalgae (Rhodophyta). Processing is aqueous and avoids halogenated solvents, aligning with green chemistry principles for materials sourcing.
  • Alternatives and trade-offs (literature/general)

    | Option | Renewable | Typical load (w/v) | Gel clarity | Notable pros | Notable cons | |---|---|---|---|---|---| | Agar | Yes | 1–2% | Moderate | Widely compatible, high melt point, inexpensive | Lot variability; charged impurities vs agarose | | Agarose | Yes | 0.5–1% | High | Low background, electrophoresis-grade options | Higher cost; narrower supply | | Gellan gum | Yes | 0.2–0.8% | High | Firm gels at low dose; cation-tunable | Sensitive to ion content; different mouthfeel/texture | | Carrageenan | Yes | 0.5–1.5% | Moderate | Strong gels with K+/Ca2+ | Ion-dependent; different rheology |

  • Greener practice tips

    • Optimize concentration to avoid overuse while maintaining required mechanical properties.
    • Reuse glassware/plates with appropriate sterilization where permitted by protocols.
    • Minimize energy by dissolving efficiently (e.g., controlled heating, avoid prolonged boiling) and batching autoclave cycles.
Pharmaceutical Uses
  • Item-specific (Product Data)

    • No pharmacopeial status or excipient-grade claims are provided for this item; refer to CoA/Spec Sheet. Labeled for research use only.
  • Literature/general manufacturing roles (non-clinical, no therapeutic claims)

    • Excipient functions: Suspending agent, thickener, and gelling agent in research formulations; can aid in preparing solid or semi-solid matrices for dosage-form prototypes during preformulation studies.
    • Compendial context: Agar is recognized in various pharmacopeias in excipient grades; however, suitability requires meeting specific monograph tests (e.g., identity, microbial limits, ash, sulfate). This product is not represented as meeting those unless explicitly stated in documentation.
    • Process considerations: Hydrate and dissolve with heat; filter or degas for clarity; sterilize by autoclaving when required. Ionic content and co-solvents may alter gel firmness and syneresis.

Any application in manufacturing or regulated work should verify compliance of the specific lot with relevant pharmacopeial specifications.

Physical Properties
  • Item-specific (Product Data)

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Storage conditions: Room temperature (as provided).
    • Other specifications (mp/bp, density, UV cutoff, metal limits, moisture): Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/general properties (non-specific to this item)

    • Physical form: Off-white to beige granular or powdered solid (typical for plain agars; appearance varies by source and processing).
    • Solubility: Insoluble in cold water; hydrates and swells. Requires near-boiling water (~95–100 °C) to dissolve; forms clear to slightly opalescent gels upon cooling.
    • Gelation and melting (thermo-reversible):
      • Gelation temperature: ~32–43 °C (literature; depends on concentration and composition).
      • Melting temperature: ~85–95 °C (literature); significant hysteresis between gelation and melting.
    • Typical working concentrations: 0.5–2.5% (w/v) for microbiological plates; ≥3% for firmer gels or immobilization (literature guidance).
    • pH behavior: Essentially neutral; contributes minimal buffering capacity. Stable over pH ~4.5–8.5 in aqueous media (literature).
    • Ionic effects: Gel strength decreases with certain chaotropes; multivalent cations and high salts can modulate gel properties (literature).

Note: Values above are general literature characteristics of agar and are not item-specific specifications.

Quality and Grades
  • Item-specific (Product Data)

    • Grade: BioReagent. No further item-specific metrics (e.g., gel strength, ash, sulfate, clarity) are provided in the Product Data; refer to CoA/Spec Sheet.
  • What BioReagent grade generally implies (literature/general)

    • Intended for laboratory/biological research workflows (e.g., microbiological media, plant tissue culture) where consistent gelation and low bioburden are important.
    • Typically manufactured with attention to background contaminants that could interfere with biological systems (e.g., low microbial contamination, controlled heavy metals, and endotoxin), but exact limits vary by supplier and lot.
  • Selection considerations for agar (general guidance; not item-specific guarantees)

    • Gel strength (g/cm²), clarity, sulfate/ash content, and moisture are common QC parameters for agar products.
    • Application mapping:
      • Microbiology plating: Standard gel strength, good clarity.
      • Plant tissue culture: Low impurities and good optical clarity.
      • Specialized assays: Consistent gelling/melting behavior and minimal background nutrients.

For exact acceptance criteria of this item, consult the lot-specific CoA/Spec Sheet.

Reaction and Applications
  • Item-specific (Product Data)

    • Manufacturer applications: Not provided in the Product Data; see general applications below.
  • Literature/general applications (not item-specific)

    • Microbiological culture media: Primary gelling agent for plate, slant, and deep media across bacteriology, mycology, and environmental microbiology.
      • Typical use levels: 1.2–2.0% (w/v) for plates; 0.5–0.8% for motility/deeps; ≥1.5% for slants (literature guidance).
      • Advantages: High melting point and low nutrient background; most microbes do not metabolize agar.
    • Plant tissue culture: Solidifying MS or other basal media, enabling callus formation and shoot/root induction.
    • Immobilization matrix: Entrapment of whole cells, enzymes, or beads for biocatalysis, diffusion studies, and gradient formation.
    • Microbiological assays: Antibiotic diffusion (disk assays) and phage plaque assays (often using soft agar overlays at ~0.5–0.7% w/v).
    • Material science/templating: Sacrificial templating to create porous inorganic/organic materials.
  • Not typical uses

    • Electrophoresis of nucleic acids/proteins: Agarose (not plain agar) is preferred due to lower charged impurities and better-defined pore structures.
  • Practical notes

    • Degassing: Briefly cool and swirl or use vacuum to reduce bubbles before pouring plates.
    • pH control: Adjust medium pH before adding agar or prior to autoclaving; agar contributes minimal buffering.
Reaction Conditions

Because agar is a matrix rather than a reactive reagent, “reaction conditions” pertain to gel preparation and processing parameters.

  • General gel preparation (literature guidance)

    • Concentration: 0.5–2.0% (w/v) for microbiology plates; 0.3–0.7% for soft agar overlays; ≥1.5% for rigid slants.
    • Dissolution: Suspend in cold water or medium; heat to boiling with stirring until fully dissolved (solution becomes clear). Avoid scorching.
    • Sterilization: Autoclave 121 °C for 15–20 min at 15 psi; avoid prolonged cycles to minimize hydrolysis.
    • Pouring: Cool to ~50–55 °C before adding heat-labile supplements (e.g., antibiotics) and pouring plates to reduce condensation and thermal degradation.
  • Factors affecting performance

    • pH and salts: Extreme pH or high ionic strength can reduce gel strength.
    • Co-solvents: Alcohols and certain organics weaken gels; limit content or validate performance.
    • Reheating: Multiple melt–gel cycles may reduce strength due to depolymerization.

These are literature-based best practices; optimize for your specific assay and vessel geometry.

Safety and Handling
  • Item-specific (Product Data)

    • GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to the product SDS.
    • Shipping: Shipped at ambient conditions (Normal), per Product Data.
    • Storage: Room temperature, dry (see Storage & Reconstitution tab for practical guidance).
  • General safety (literature/practice; not a substitute for SDS)

    • Expected hazards: Generally regarded as low acute toxicity. Primary concerns are dust inhalation, mechanical eye irritation, and potential combustible dust hazard when dispersed in air.
    • PPE: Laboratory coat, safety glasses, and appropriate gloves. Use dust control measures (avoid creating aerosols). Handle powders in a fume hood or with local exhaust if dusting is likely.
    • Incompatibilities: Strong oxidizers may degrade polysaccharides. Avoid contact with strong acids/bases at high temperature which can hydrolyze the polymer.
    • Thermal handling: Dissolution requires near-boiling water; use heat-resistant gloves and caution when autoclaving (pressure/steam burns risk). Allow media to cool to ~50–55 °C before handling/pouring.
    • First aid (overview):
      • Inhalation: Move to fresh air; seek medical attention if irritation persists.
      • Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; seek attention if irritation continues.
      • Skin contact: Wash with soap and water; molten media can cause thermal burns—cool affected area with water and seek medical care.
      • Ingestion: Rinse mouth with water; seek advice if symptoms occur.

Always consult the SDS for authoritative hazard, exposure limits, and emergency measures.

Solvent Selection

Agar is a water-processed gelling polymer; solvent selection focuses on aqueous media formulation rather than organic solvation.

  • Polarity and medium compatibility (literature/general)

    • Primary solvent: Water. Insoluble in cold water; dissolves upon heating to near-boiling; gels on cooling.
    • Buffer compatibility: Compatible with most common microbiological and biological buffers (e.g., phosphate, Tris) over mild pH. Minimal intrinsic buffering.
    • Additives: Salts, sugars, and peptones influence gel point and strength; high concentrations of chaotropes or solvents (e.g., ethanol, DMSO) can weaken gels.
  • When to choose agar vs alternatives (general comparison)

    • Agar vs agarose: Agar offers economical gelation for culture media; agarose provides higher purity/low-charge matrix for electrophoresis and sensitive assays.
    • Agar vs gellan gum: Gellan forms firmer, more transparent gels at lower loadings and is cation-responsive; agar offers classic microbiology performance and broad robustness.
    • Agar vs gelatin: Agar gels are plant-derived, thermo-reversible with higher melting points, and are less prone to proteolysis; gelatin is proteinaceous and melts near physiological temperatures.
  • Practical tips

    • Hydration: Pre-soak in cold water for several minutes to reduce clumping, then heat to dissolve.
    • Clarification: Gentle boiling and brief holding near 100 °C improve clarity; avoid prolonged overheating to minimize hydrolysis.
Storage and Reconstitution
  • Item-specific (Product Data)

    • Storage conditions: Room temperature (ambient), per Product Data.
    • Shipped: Normal ambient.
    • Additional item-specific details (shelf life, moisture limits, stabilizers): Not specified for this item; refer to CoA/Spec Sheet.
  • Practical guidance (literature/general)

    • Dry storage: Keep container tightly closed in a cool, dry place. Protect from humidity to prevent caking and microbial growth. Use desiccant if necessary.
    • Light/air: Routine laboratory light exposure is acceptable; avoid prolonged high-UV exposure which can induce degradation.
    • Reconstitution/dissolution: Sprinkle agar into cold water or medium with stirring to pre-wet; heat to >95 °C until fully dissolved and clear. For small volumes, microwave heating with intermittent swirling is effective; take care to avoid superheating.
    • Sterilization: Autoclave at 121 °C for 15–20 minutes. After sterilization, cool to 50–55 °C before adding heat-labile components and pouring.
    • Prepared media storage: Solid plates typically store inverted in sealed sleeves to reduce dehydration; shelf-life depends on formulation and storage conditions (not specified for this item). Monitor for contamination and desiccation.

Always consult the lot-specific CoA and SDS for authoritative handling and stability information.

Structure and Identity

Brief description: Plain agar is a heterogeneous, seaweed-derived polysaccharide blend used primarily as a gelling agent in microbiology and tissue culture.

  • Item-specific (Product Data)

    • Product name: Plain Agar (SKU: P1528422)
    • Grade: BioReagent
    • CAS/EC/UN identifiers: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES / InChI / InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/general description (for background)

    • Composition: Predominantly agarose (a neutral, linear polymer of repeating agarobiose disaccharide units: β-D-galactose linked to 3,6-anhydro-α-L-galactose) mixed with agaropectin (sulfated, methylated, and pyruvylated galactans).
    • Structural features: Long, unbranched galactan chains capable of forming double helices upon cooling; helices aggregate into a 3D network that immobilizes water to form a thermo-reversible gel.
    • 2D structural motifs (verbal): Alternating galactopyranose rings connected via glycosidic linkages (commonly 1→3 and 1→4) with occasional sulfate and other substituents in agaropectin. No defined stereocenter pattern for the whole mixture due to heterogeneity.
    • Identity nature: Complex natural product mixture; a single definitive molecular formula or discrete structure is not applicable.
Synthetic Utility
  • Item-specific (Product Data)

    • No synthetic reagent role is specified.
  • Literature/general utility in synthesis and materials

    • Immobilization matrix: Entrap whole cells or enzymes within agar beads/slabs to enable heterogeneous biocatalysis and reuse; improves handling and separation.
    • Templating agent: Use agar gels as sacrificial scaffolds for preparing porous inorganic oxides, carbons, or polymer foams; burn-out or solvent exchange leaves controlled porosity.
    • Diffusion control: Establish concentration gradients for reaction–diffusion studies or crystallization screening within a stable hydrogel.
    • Green processing aid: Conduct aqueous-phase transformations in structured media to reduce solvent use and enhance mass-transfer control.
    • Microfabrication: Mold microchannels or castings in soft lithography-like setups where moderate thermal stability and mechanical integrity are needed.

These roles leverage agar’s thermo-reversible gelation, water compatibility, and inertness rather than chemical reactivity.

Target Specificity

Not applicable to this product type.

  • Item-specific (Product Data)
    • No antigen/epitope, clone, isotype, or species reactivity information is relevant to plain agar.

Agar is a gelling material, not an affinity reagent or biological targeting molecule.

¿Necesita ayuda para elegir la calidad?

Nuestra guía de selección de calidades cubre la pureza, el estado del estabilizador y la idoneidad de la aplicación para todas las variantes de nuestro catálogo.

Ver la guía de calidades BioReagent →

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.