PS Agar - BioReagent

Cat. No.: P1528662
Disponible para pedir
CALIDAD & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
250g
P1528662-250g
Fabricado bajo pedido · 8–12 semanas
173,46€
Enter a quantity for the sizes you want to add.

Descripción general

For isolation and cultivation of Peptococcus

Especificaciones

Especificaciones y pureza
BioReagent
Condiciones de almacenamiento de almacenamiento
Room temperature
Enviado en
Normal
Grado
BioReagent
Product Line
Productos biológicos

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols

No item-specific, validated application protocols are provided in the Product Data. Refer to the CoA/Spec Sheet for any formulation-specific instructions.

General protocol for preparing agar plates (literature guidance; not item-specific):

  • Weigh the recommended mass of PS Agar per liter of water as indicated on the CoA.
  • Add powder to purified water with vigorous stirring; heat to near boiling until completely dissolved.
  • Autoclave at 121 °C for ~15 minutes. Allow to cool to ~45–55 °C.
  • If required, aseptically add sterile-filtered supplements (e.g., antibiotics, indicators) appropriate to the PS formulation.
  • Pour into sterile Petri dishes on a level surface. Let solidify; store inverted at 2–8 °C in sealed bags to minimize desiccation (storage of prepared plates is general guidance; this item’s plate storage conditions are not specified).
  • Perform sterility checks and, if relevant, growth-promotion testing.

For specialized uses (e.g., soft agar overlays, motility tests, plaque assays), adjust agar concentration per your method and validate with control strains.

Biological Roles

Item-specific biological information: Not specified for this item; refer to CoA/Spec Sheet for any selectivity or supplements embodied by the “PS” formulation.

General/literature context for agar-based media:

  • Functional role: Agar provides a largely inert, non-nutritive gel matrix that most microorganisms cannot metabolize. It solidifies aqueous nutrient formulations to generate a two-dimensional growth surface for colony isolation and enumeration.
  • Growth environment: The underlying formulation (buffers, peptones, carbohydrates, salts, indicators, inhibitors) determines which organisms grow, how rapidly, and with what colony phenotypes. Without the composition of PS Agar, no organism-specific claims can be made.
  • Advantages over gelatin (literature): Higher melting temperature, thermo-reversible gelation with significant hysteresis, and resistance to hydrolysis by many microbial proteases. These properties permit incubation at 37 °C and above without liquefaction.
  • Applications: Routine cultivation, environmental monitoring, teaching labs, microbial genetics (e.g., replica plating), and quality control testing—provided the formulation matches the use case.

Notes for users:

  • Confirm whether PS Agar contains selective agents, dyes, or antibiotics before use with sensitive strains.
  • For heat-labile biological additives (e.g., blood, antibiotics), cool sterilized agar base to ~45–55 °C before aseptic supplementation to preserve activity (literature guidance).
Buffer Applications

Not typically applicable. PS Agar is a dehydrated solid medium component intended to form a gel matrix for microbial cultivation, not a buffering reagent per se.

General/literature notes:

  • Many agar media incorporate buffering systems (e.g., phosphate, TRIS, HEPES) to maintain pH during growth, but the presence and concentrations are formulation-specific. The buffer composition of this PS Agar is not specified for this item; refer to the CoA/Spec Sheet.
  • If preparing custom buffered media, adjust pH prior to sterilization and verify final pH after autoclaving, as heating can shift pH depending on buffer chemistry.
Green Alternatives

Context: Agar is a biobased, renewable gelling agent extracted from red algae and is generally considered a benign material in green chemistry terms. Environmental considerations are more about sourcing and life-cycle impacts than intrinsic hazard.

Comparative perspective (literature):

  • Agar vs. Petrochemical polymers (e.g., polystyrene gel matrices): Agar is renewable, biodegradable, and typically processed in water without organic solvents. Petrochemical gels may entail higher VOCs or solvent use during manufacture.
  • Agar vs. Agarose: Both are biobased. Agarose purification may increase processing energy and cost; however, it can reduce impurities that inhibit sensitive organisms.
  • Agar vs. Gellan gum: Gellan is produced by microbial fermentation (renewable) and can form strong gels at lower loadings, potentially reducing material usage, though it may require specific cations for optimal gelation.

Mini comparison table (literature):

  • Agar: Renewable, water-based processing, broad organism compatibility; variable clarity and melt/gel hysteresis.
  • Agarose: Higher clarity/consistency; greater processing footprint and cost.
  • Gellan gum: Strong, clear gels at low %; different colony morphology and cation dependence.

Practical guidance:

  • Choose the minimal effective concentration to reduce resource use.
  • Prepare only the volumes needed to limit waste; sterilize and dispose of biological waste responsibly.
  • If sustainability metrics are critical, request sourcing and LCA information from the supplier.
Pharmaceutical Uses

Clinical/diagnostic claims: None. This product is for research use only.

Industrial and QC context (literature/general):

  • Agar-based media are widely used in pharmaceutical and biomanufacturing environments for environmental monitoring, bioburden testing, and antibiotic potency assays. However, such uses require conformity to compendial standards (e.g., USP/EP/JP) and documented growth-promotion tests.
  • For this specific PS Agar, compendial status, formulation, and performance specifications are not specified for this item; consult the CoA/Spec Sheet and your QA unit before any GMP-adjacent use.

Formulation role (general):

  • Acts as the solidifying agent in Petri dishes or contact plates; the underlying nutrient/indicator system determines suitability for aerobic counts, selective recovery, or differential readouts.

Practical guidance:

  • If a pharmacopeial medium is required (e.g., TSA, SDA, R2A), verify that the product explicitly meets the relevant monograph, or source a product labeled and certified for that purpose.
  • Implement lot qualification via growth-promotion testing with defined challenge organisms. Document sterilization parameters, plate fill volumes, and incubation conditions per SOPs.
Physical Properties

Item-specific values: Not specified for this item; refer to CoA/Spec Sheet.

General/literature properties for agar-based dehydrated media:

  • Physical state: Free-flowing beige to off-white powder or granules (appearance for this specific item is not specified; consult CoA).
  • Solubility (literature): Swells in cold water; dissolves in hot water (>85–90 °C) with stirring; forms gels upon cooling. Insoluble in most organic solvents.
  • Gelation/melt (literature): Typical agarose-rich systems gel near ~32–42 °C and melt near ~80–95 °C, depending on concentration and composition. Exact values vary with salts, sugars, and agaropectin content.
  • pH (1–2% w/v aqueous, literature): Typically near neutral but depends on formulation; many microbiological agars are buffered to ~pH 6.8–7.4 before sterilization.
  • Density/bulk density (literature): Bulk density varies widely by grind and supplier; commonly ~0.3–0.6 g/mL (non-specification; for general planning only).
  • Refractive index, logP, pKa: Not applicable to this heterogeneous polymeric mixture.

Practical notes:

  • Dissolution is improved by gradual wetting, vigorous stirring, and heating to near boiling; avoid localized scorching.
  • Salts, peptones, and carbohydrates in the formulation can shift gel strength and gel/melt temperatures. If performance is critical (e.g., motility tests, overlay pours), verify gel strength on a pilot batch.
Quality and Grades

Item-specific grade: BioReagent (as provided). Purity specifications, stabilizers, and performance metrics (e.g., gel strength, ash, sulfate, microbial limits): Not specified for this item; refer to CoA/Spec Sheet.

What BioReagent grade generally implies (literature/industry usage):

  • Designed for laboratory research workflows, including microbiology and molecular biology support where consistent gelling and low background are important.
  • Typically manufactured with controls on bioburden, ash/mineral content, and gel strength; however, exact acceptance criteria are product-specific and should be verified on the CoA.

Practical implications for users:

  • Reproducibility: Consistent gelation behavior supports plate uniformity and colony morphology assessment.
  • Downstream compatibility: Lower background fluorescence/absorbance and minimal inhibitory impurities reduce interference in microbial growth and indicator reactions.
  • Regulatory scope: This product is intended for research use only (not for diagnostic or clinical use). If you require compliance with specific pharmacopeial monographs (e.g., USP/EP culture media), confirm suitability and documentation before use.

Recommendations:

  • Verify lot-specific parameters important to your application (e.g., recommended grams per liter, gel strength, pH after sterilization) on the CoA.
  • For critical assays (antibiotic potency, environmental monitoring), perform a growth-promotion test (GPT) on each new lot to confirm performance.
Reaction and Applications

Scope: As a microbiological culture medium component, PS Agar is not used as a reagent in organic reactions. Instead, its value lies in providing a solid growth surface for microorganisms. No chemical reaction applications are claimed for this specific item.

Research and laboratory applications (literature/practice):

  • Solid culture plates: Preparation of Petri dishes for isolation, enumeration, and maintenance of bacteria, yeasts, or molds appropriate to the PS formulation.
  • Selectivity/differential use: The “PS” designation indicates a defined formulation; without a disclosed composition, the selectivity cannot be specified. Users should consult the CoA/spec sheet to determine whether the medium is general-purpose, selective, or differential and to identify any inhibitors, dyes, or antibiotics included.
  • Overlay and soft agar uses: Some formulations support plaque assays (bacteriophages) or motility tests when prepared at lower agar concentrations (literature). Whether PS Agar is suitable depends on the specified gel strength and recommended concentration.

Practical tips (literature):

  • Dissolve with heat and vigorous stirring; autoclave 121 °C ~15 min. Cool to 45–55 °C before pouring plates to avoid condensation and to enable addition of heat-labile supplements if applicable.
  • Perform sterility checks (uninoculated control plates) and, where applicable, growth-promotion testing with representative strains to verify lot performance.
Reaction Conditions

Not applicable for chemical reaction optimization. PS Agar is prepared as a culture medium rather than used under conventional reaction conditions.

General preparation conditions for agar media (literature guidance; not item-specific specifications):

  • Hydration: Add the recommended grams per liter (as per the CoA) to purified water while stirring.
  • Dissolution: Heat to near boiling (≥85–90 °C) with vigorous agitation until fully dissolved; avoid scorching.
  • Sterilization: Autoclave at 121 °C for ~15 minutes. For media containing heat-labile components, sterilize the base separately and add sterile-filtered supplements after cooling.
  • Pouring plates: Cool to ~45–55 °C, then pour into sterile Petri dishes (typically ~20–25 mL per 90 mm plate; adjust per SOP). Allow to solidify on a level surface; dry plates as required to remove surface moisture.
  • Incubation: Use organism-appropriate temperature, atmosphere, and time. Conditions vary widely by application and cannot be inferred without the PS formulation.

Always verify the lot-specific instructions and composition on the product CoA/Spec Sheet.

Safety and Handling

Item-specific hazard classification (GHS, signal word, pictograms, H-statements): Not specified for this item; refer to SDS.

General laboratory safety guidance for dehydrated agar media (literature/best practice):

  • Expected hazards: Typically regarded as low acute toxicity. Main risks are dust inhalation, mechanical eye irritation, and hot-liquid burn hazards during preparation.
  • PPE: Wear lab coat, safety glasses/goggles, and appropriate gloves (e.g., nitrile). Use a dust mask or work in a fume hood when handling powders to minimize inhalation.
  • Handling: Avoid generating dust. Add powder slowly to vigorously stirred water to prevent clumping. Use heat-resistant gloves and face protection when handling boiling media and during autoclaving.
  • Incompatibilities: Strong oxidizers can degrade polysaccharides. Avoid contact with reactive acids/bases that can hydrolyze or caramelize the medium during preparation.
  • Sterilization: Standard practice is autoclaving at 121 °C for ~15 minutes; do not over-sterilize heat-labile supplements—filter-sterilize and add aseptically after cooling to ~45–55 °C.
  • First aid (overview; defer to SDS): If inhaled, move to fresh air. If in eyes, rinse cautiously with water for several minutes. If on skin, wash with soap and water. If ingested, rinse mouth and seek medical advice if symptoms persist.
  • Waste: Dispose of according to institutional biosafety procedures. Autoclave used plates/broth to inactivate biologicals before disposal.
Solvent Selection

Applicability: As a dehydrated culture medium, PS Agar is formulated to be reconstituted in purified water, not in organic solvents. Conventional solvent selection paradigms for small-molecule solutes do not apply.

General guidance (literature/best practice):

  • Primary solvent: High-purity water (e.g., ASTM Type 1 or Type 2; molecular biology grade if downstream nucleic-acid work is anticipated).
  • Miscibility: Agar components hydrate and dissolve upon heating in water; they are effectively insoluble in most organic solvents.
  • Water quality considerations:
    • Low ionic and organic carbon content minimizes background and supports reproducible gelation.
    • Avoid water with residual chlorine or heavy metals, which can inhibit growth or alter indicator performance.
  • When to choose alternatives: If a different gel matrix is desired (e.g., lower melt temperature or transparent gels for imaging), consider agarose or gellan gum (literature). These are not solvents but alternative gelling agents with distinct properties.

Small comparison (literature):

  • Agar vs. Agarose: Agarose offers lower sulfate content and higher clarity—useful for fluorescence imaging. Agar provides robust gelation at lower cost for routine plating.
  • Agar vs. Gellan gum: Gellan forms firm, clear gels at lower concentrations and tolerates diverse salts; however, it may change colony morphology relative to agar. Choice depends on assay needs.
Storage and Reconstitution

Item-specific storage conditions: Room temperature (as provided). Shipping: Normal (as provided).

Additional item-specific details (appearance, reconstitution mass per liter, stabilizers): Not specified for this item; refer to CoA/Spec Sheet.

General guidance for dehydrated agar media (literature/best practice):

  • Storage (dry powder): Keep tightly sealed in the original container, protected from moisture and strong odors. Store at ambient temperature in a cool, dry place away from direct sunlight. Avoid repeated opening in humid environments; use desiccant if needed.
  • Shelf life: Observe the product label/CoA for expiry. Discard if caking, discoloration, or off-odors are observed.
  • Reconstitution: Hydrate in purified water at the grams-per-liter rate specified on the CoA. Heat with stirring to dissolve fully; do not overboil. Adjust pH if instructed by the specification.
  • Sterilization: Autoclave at 121 °C for ~15 minutes unless otherwise directed. After sterilization, cool to ~45–55 °C before pouring plates or adding heat-labile components.
  • Prepared plates: For general practice, store inverted, sealed to prevent drying, typically at 2–8 °C. Allow plates to equilibrate to room temperature before use to minimize condensation. Exact storage duration depends on formulation and must be validated per application.

Research Use Note: For research use only.

Structure and Identity

Item-specific identifiers (CAS, InChIKey, SMILES, molecular formula, MW): Not specified for this item; refer to CoA/Spec Sheet.

General description (literature):

  • PS Agar is supplied as a dehydrated, microbiology-grade solid medium component intended to form a gel matrix upon hydration and sterilization. The term “PS” denotes a specific formulation defined by the manufacturer; the exact composition is not specified for this item.
  • The gelling component of most agar media is predominantly agarose (a linear polysaccharide built from repeating agarobiose units: β-D-galactose and 3,6-anhydro-α-L-galactose) with varying amounts of agaropectin (sulfated/pyruvylated polysaccharides).
  • Structural features (literature):
    • Heteropolysaccharide mixture, high molecular mass; no discrete small-molecule structure.
    • Lacks defined stereocenters in the sense of a single compound; polysaccharide chains contain glycosidic linkages (primarily α(1→3) and β(1→4) in agarose repeat).
  • 2D structural description (literature):
    • Repeating disaccharide units linked via glycosidic bonds forming long, linear chains capable of double-helix association and water-mediated hydrogen bonding; upon cooling, chains aggregate into a thermo-reversible gel network.

Notes:

  • Because this product is a formulated dehydrated medium and not a single chemical, conventional single-compound identifiers are typically not applicable. Always consult the product CoA/Specification Sheet for the exact formulation and any available identifiers.
Synthetic Utility

Not a synthetic organic reagent. PS Agar functions as a microbiological medium component and does not participate as a reactant, catalyst, or solvent in chemical synthesis.

General laboratory utility (literature):

  • Provides a solid-phase support for microbial work that may precede or accompany synthetic workflows (e.g., cloning, expression of enzymes, production of biocatalysts), but it is not itself a reagent for chemical transformations.

If your goal is chemical synthesis:

  • Select appropriate chemical reagents and solvents; agar-based media are not substitutes for chromatographic stationary phases, polymer supports, or reaction media. For immobilized biocatalysis, consider agarose beads or tailored polymer resins designed for flow/reactor compatibility (literature), not plate-grade agar.
Target Specificity

Not applicable. This product is not an antibody, probe, or affinity reagent. No antigen/epitope specificity, clone information, isotype, or species reactivity applies.

¿Necesita ayuda para elegir la calidad?

Nuestra guía de selección de calidades cubre la pureza, el estado del estabilizador y la idoneidad de la aplicación para todas las variantes de nuestro catálogo.

Ver la guía de calidades BioReagent →

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.