CALIDAD & PUREZAMoligand™?Moligand™ — Aladdin's line of ligands and bioactive small molecules. Use for receptor, pathway, and binding studies needing defined small-molecule tools.10 mM in DMSO
SLF80821178 is a potent and orally active inhibitor of Sphingosine-1-Phosphate Transporter ( Spns2 ). SLF80821178 inhibits S1P release with an IC 50 of 51 nM in HeLa cells and a T 1/2 of 2.4 h in mouse.
Especificaciones
Especificaciones y pureza
Moligand™, 10 mM in DMSO
Condiciones de almacenamiento de almacenamiento
Store at -80°C
Enviado en
Dry ice packs + Cold packs
Este producto requiere envío en cadena de frío. Los servicios terrestres y otros servicios económicos no están disponibles.
Grado
Moligand™
Nombres e identificadores
Peso molecular
345.52
Datos avanzados
Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reseñas
Reseñas de cliente
Application Protocols
No vendor-validated protocols are provided for this specific item.
General workflow for screening compounds
Stock preparation: Dissolve in anhydrous DMSO to 10–50 mM where soluble. Filter (0.22 μm PTFE) if particulate remains and compatible with the solvent.
Plate handling: Dispense using acoustic or pin-tool transfer where possible to minimize DMSO volume and improve precision.
Assay setup: Maintain constant final DMSO across wells (typically 0.1–1% v/v). Include vehicle and positive/negative controls.
Data quality: Use duplicates or triplicates and incorporate plate controls for Z′-factor evaluation. Re-test initial actives with fresh aliquots.
Stability checks: If signal drift is observed, assess compound stability in buffer at room temperature and at 37°C by LC–MS.
Always adapt to your assay’s validated SOPs.
Biological Roles
Item-specific biological functions or endogenous roles are not assigned to this screening ligand.
Assigned targets/pathways: Not specified for this item; no target annotation is provided.
Mode of action: Not specified for this item.
General context
Compounds in ligand libraries are typically used to probe protein function, modulate pathways, or serve as starting points for SAR. Any observed effects should be treated as preliminary until verified by orthogonal assays, concentration-response curves, and artifact controls (e.g., redox activity, fluorescence interference, aggregation).
Recommendation
Record provenance (lot, CAS, storage history) and verify identity prior to publishing biological data.
Include controls for assay interference (inner-filter effects, pan-assay interference patterns) when applicable.
Buffer Applications
Not typically applicable. SLF80821178 is offered as a small-molecule screening ligand rather than a buffering reagent.
Practical note (general)
When preparing assay buffers containing small-molecule stocks, ensure the final organic co-solvent (e.g., DMSO) is matched across all wells and controls, and confirm buffer compatibility (salt strength, pH, surfactant) with the compound to avoid precipitation.
Green Alternatives
Because the exact structure and solvent requirements of SLF80821178 are not disclosed here, green chemistry substitutions must be evaluated case-by-case.
General greener-practice considerations for small-molecule handling
Prefer water or buffered aqueous media with minimal co-solvent when assay-compatible.
When organic solvents are needed, consider bio-based ethanol, 2-MeTHF, or Cyrene™ where solubility and assay tolerance permit, recognizing that these are often less universal than DMSO.
Minimize solvent volumes by preparing higher-concentration master stocks and performing on-plate dilutions.
Reduce waste via miniaturized screening formats (384/1536-well) and sealed plates to limit evaporation.
Trade-offs (general)
DMSO remains the most broadly compatible solvent for discovery assays but is petroleum-derived and difficult to recover. Greener options may limit solubility or alter assay signals; validate rigorously before large-scale adoption.
Pharmaceutical Uses
No excipient or pharmacopeial status is provided for this item. It is supplied strictly for research use only.
General clarification
Screening ligands may serve as starting points for medicinal chemistry programs but are not manufactured as GMP-grade materials and are not intended for human or veterinary use.
If preformulation studies are contemplated, obtain comprehensive analytical data (identity, purity profile, salt/counterion, polymorph information) from the CoA and perform your own characterization.
Item-specific notes
Pharmacopeia listing (USP/EP/JP): Not specified for this item.
Excipient status: Not applicable.
Physical Properties
Item-specific physicochemical data are not provided in the current listing. Consult the CoA/Spec Sheet for lot-level details.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Melting/Freezing Point: Not specified for this item; refer to CoA/Spec Sheet.
Boiling Point: Not specified for this item; refer to CoA/Spec Sheet.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Refractive Index: Not applicable/unknown for solids; Not specified for this item when applicable.
Solubility: Not specified for this item; refer to CoA/Spec Sheet.
LogP/logD, pKa: Not specified for this item; refer to CoA/Spec Sheet.
General guidance (literature/general)
For small-molecule screening ligands, DMSO is frequently used as a stock solvent at 10–50 mM. If solubility is uncertain, trial dissolution in DMSO, DMF, or mixed aqueous co-solvent systems (e.g., DMSO/H2O with 0.5–2% v/v co-solvent such as PEG-400 or ethanol) can be evaluated.
Verify compound integrity after dissolution by LC–MS where possible, as some chemotypes may undergo hydrolysis or oxidation depending on pH and light exposure.
Quality and Grades
Listed Grade: Moligand™
What this generally implies (general/portfolio context)
Moligand™ denotes inclusion in a small-molecule ligand/screening collection intended for discovery workflows (e.g., binding assays, phenotypic screens). The focus is typically on structural diversity and screening compatibility rather than formulation for clinical use.
Item-specific quality details
Assay/Purity, Residual Solvents, Water, Peroxides, Metals, UV Cutoff: Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers/Inhibitors: Not specified for this item; refer to CoA/Spec Sheet.
Guidance for users
For screening campaigns, confirm identity and purity by orthogonal methods (e.g., LC–MS and 1H NMR) when feasible, especially prior to hit validation.
If your application requires additional specifications (particle size, salt form, counterion content, chiral purity), request the latest CoA and analytical package for this CAS and lot.
Reaction and Applications
This product is positioned as a small-molecule ligand for screening/compound library workflows rather than as a synthetic reagent with a defined reactivity profile.
Typical research applications (general)
Primary/secondary screening: Use as-received or from DMSO stocks in biochemical, biophysical (e.g., thermal shift, SPR), or cell-based assays to identify preliminary activity signals.
Mechanistic follow-up: Re-test positives with freshly prepared stock, confirm concentration by UV or quantitative NMR where applicable, and perform counter-screens to filter assay interference.
Profiling: Evaluate solubility limits, stability in assay buffer, and potential aggregation (detergent challenge assays, DLS) to mitigate false positives.
Practical tips
Prepare serial dilutions freshly to minimize freeze–thaw cycles and DMSO water uptake.
Use low-bind plastics and protect from light if chromophoric groups are suspected.
Include vehicle controls matched to the final organic content.
Note: If your intent is chemical synthesis rather than screening, request full structural data to judge functional-group compatibility, protecting-group needs, and reaction planning.
Reaction Conditions
This product is not presented with a defined reactivity profile, and no literature procedures are associated in the listing.
Guidance if used in synthesis (general)
Establish solubility in prospective reaction media (e.g., polar aprotic solvents) and check for acid/base sensitivity via micro-scale tests.
Confirm thermal stability by DSC/TGA or by monitoring by LC–MS after heating at intended temperatures.
If metal-catalyzed reactions are envisaged, evaluate ligand/catalyst compatibility and potential chelation or catalyst poisoning effects depending on heteroatoms present—information that requires structural disclosure.
For screening applications, this section is typically not applicable.
Safety and Handling
Hazard classification data are not provided for this item in the current listing. Always consult the SDS for authoritative guidance.
GHS Classification: Not specified for this item; refer to SDS.
Signal Word / H-Statements / Pictograms: Not specified for this item; refer to SDS.
General laboratory precautions (best practice)
PPE: Laboratory coat, nitrile gloves, and safety glasses as baseline protection. Upgrade to splash goggles and use a certified chemical fume hood when handling powders or preparing stock solutions.
Avoid: Inhalation of dust/aerosols; skin and eye contact. Prevent contamination of shared equipment (balances, pipettes) by using weighing paper/boats and closed containers.
Incompatibilities: Unknown item-specific incompatibilities; as a precaution, avoid strong oxidizers and strong acids/bases until compatibility is known.
Hygiene: Wash hands after handling. Do not pipette by mouth. Segregate from food and feed areas.
First aid (general): If on skin/eyes, rinse with water for at least 15 minutes and remove contaminated clothing; if inhaled, move to fresh air; if ingested, rinse mouth. Seek medical attention and provide SDS.
Waste: Dispose of according to institutional hazardous chemical waste protocols; do not discharge to drains.
Note: Some screening ligands may be bioactive. Handle with care even at milligram or micromole scale.
Solvent Selection
Item-specific solubility and polarity are not disclosed in this listing.
Practical approach for unknown small-molecule solubility (general guidance)
Primary stock solvent: DMSO is the default for screening libraries; begin with 10–20 mM target concentration and adjust as needed.
Alternatives: If DMSO solubility is inadequate, trial dissolution in DMF or NMP, then back-dilute into assay buffer keeping final organic content ≤1–2% v/v.
Aqueous systems: Assess solubilization with co-solvents (0.1–1% v/v DMSO/ethanol), surfactants (0.01–0.1% Tween 80 or Pluronic F-127), or cyclodextrins if compatible with the assay.
pH effects: For ionizable compounds, solubility can improve by adjusting pH, but ensure assay compatibility and compound stability (avoid hydrolysis at extreme pH).
Small comparison (general)
DMSO: Broad solvency, high boiling point, compatible with most biochemical assays at ≤1% v/v.
DMF: Similar solvency; more hygroscopic and sometimes less assay-friendly.
Ethanol: Lower solvency for highly lipophilic scaffolds but easier removal and often acceptable up to ~1% v/v.
Always verify clarity and absence of precipitation after dilution into the working medium.
Storage and Reconstitution
Item-specific conditions provided by the listing:
Storage Conditions: Store at −80°C
Shipped In: Dry ice packs + Cold packs
Additional practical guidance (general)
Upon receipt, keep sealed at −80°C. Allow containers to equilibrate to room temperature in a desiccator before opening to prevent condensation.
If supplied as a solid, divide into single-use aliquots under dry inert atmosphere when feasible. If supplied in DMSO, prepare small aliquots to avoid repeated freeze–thaw cycles.
Typical stock solutions: 10–50 mM in anhydrous DMSO (if soluble). Record exact concentration and date of preparation.
Freeze–thaw: Minimize cycles; prefer storage at −80°C in sealed, moisture-impermeable vials or plates with foil seals and adhesive films.
Light/air sensitivity: Not specified for this item; as a precaution, protect from light and moisture and consider inert gas backfill for long-term storage.
For definitive stability data (shelf life, thaw stability, solution stability), refer to the item’s CoA/Spec Sheet.
Structure and Identity
Research ligand entry for screening collections. Item-specific identifiers are limited in the current listing.
Product Name: SLF80821178 (catalog designation)
SKU: S1498514
CAS: 2764877-61-2
Grade/Purity: Moligand™ (screening-grade; see Quality & Grades)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
Structural description
Item-specific functional groups, ring systems, and stereochemistry: Not specified for this item.
Notes for researchers
This entry is part of a small-molecule/compound library offering and is typically used in ligand discovery, screening, or probe development. If you require full structural disclosure (SMILES, InChI, NMR, LC–MS), request the most recent CoA/Spec Sheet for this CAS-specific lot.
Synthetic Utility
Not enough structural information is provided to discuss synthetic transformations specific to SLF80821178.
General guidance
If this compound is to be used as a building block or intermediate, request full structural disclosure (SMILES/InChI) and any available protecting-group or salt-form information to assess reactivity and compatibility with planned conditions (e.g., cross-coupling, amide coupling, SNAr).
For SAR campaigns, ensure access to analogable vectors on the scaffold and verify the feasibility of diversification (handles such as aryl halides, boronates, acids/amines/alcohols).
Target Specificity
Target or selectivity information is not provided for this item.
Intended biological target(s): Not specified for this item.
Assay-validated specificity: Not specified for this item.
Recommendation
Treat any observed activity as preliminary. Perform concentration–response testing, orthogonal assay formats, and counterscreens against common interference pathways before assigning specificity.
Preguntas frecuentes
How should this product be stored?
Store at ?80 °C. Ultra-low temperature storage is required to maintain the specified shelf life.
What is Moligand??
Moligand? is one of Aladdin Scientific's premium product lines, formulated for high-purity applications across multiple workflows. Compared to standard grades in the same workflow, Moligand? products typically offer tighter specifications, more rigorous QC, and stronger lot-to-lot consistency.
How is this product shipped?
This product ships frozen with dry ice and cold packs. Unpack on arrival and transfer it to the storage condition stated above; handle dry ice with insulated gloves in a ventilated area.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 2764877-61-2, the molecular formula is C21H35N3O, and the molecular weight is 345.52 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
¿Necesita ayuda para elegir la calidad?
Nuestra guía de selección de calidades cubre la pureza, el estado del estabilizador y la idoneidad de la aplicación para todas las variantes de nuestro catálogo.
Utilizamos cookies para garantizar el correcto funcionamiento del sitio web y, cuando esté permitido, para mejorar su experiencia. Puede gestionar sus preferencias en cualquier momento en Configuración. Más información en nuestra Política de Cookies.
¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?
Recordármelo más tarde
¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.