THP-PEG4-Boc , CAS No.T1445596

CAS: T1445596 Cat. No.: T1445596 Fórmula: C19H36O8 Peso molecular: 392.48
Disponible para pedir
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
1mg
T1445596-1mg
Fabricado bajo pedido · 8–12 semanas
Enter a quantity for the sizes you want to add.

Descripción general

THP-PEG4-Boc is a PEG-based PROTAC linker that can be used in the synthesis of PROTACs.

Especificaciones

Condiciones de almacenamiento de almacenamiento
Store at -20°C
Enviado en
Ice chest + Ice pads
Este producto requiere envío en cadena de frío. Los servicios terrestres y otros servicios económicos no están disponibles.
Nombres e identificadores
Peso molecular
392.48

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols

Item-specific, validated protocols: Not specified for this item; refer to CoA/Spec Sheet and SDS.

General workflow examples (literature/general):

  • Boc deprotection sequence:
    1. Dissolve the material in DCM (or 2-MeTHF) at 0.05–0.2 M.
    2. Add TFA (v/v 50–100%) at 0–25°C, stir 0.5–2 h.
    3. Evaporate volatiles; co-evaporate with toluene to remove TFA.
    4. Neutralize and proceed to coupling without extensive purification if appropriate.
  • THP deprotection sequence:
    1. Dissolve in MeOH/THF with 5–10% H2O.
    2. Add catalytic p-TsOH or dilute HCl; stir at rt until completion.
    3. Neutralize with NaHCO3, extract, and dry.
  • Amide coupling after Boc removal:
    1. Dissolve amine and carboxylic acid in DMF.
    2. Add HATU (1.05–1.2 equiv) and DIPEA (2–4 equiv).
    3. Stir at rt until complete; work up and purify by flash chromatography or preparative HPLC.

Note: Parameters above are general literature guidance only. Optimize for your specific substrate and scale.

Biological Roles

Item-specific biological data: Not specified for this item; refer to CoA/Spec Sheet.

General context (literature/general):

  • THP-PEG4-Boc is a synthetic, protected PEG linker and does not have an intrinsic biological role. However, PEGylated spacers are widely used in biochemical research to:
    • Improve aqueous compatibility and reduce nonspecific interactions when linking biomolecules to surfaces or other molecules.
    • Modulate spatial presentation and flexibility between a ligand and a protein or cell surface.
  • After deprotection, the amine/alcohol termini can be derivatized to bio-orthogonal handles (e.g., azide/alkyne, NHS esters, maleimides) enabling click chemistry or selective bioconjugation.
  • Caution: No claims of biocompatibility, toxicity, or suitability for therapeutic use are made for this catalog item. All uses are strictly for research and laboratory development.
Buffer Applications

This product is not a buffering reagent and is not typically used to set or maintain pH. If incorporated into biochemical workflows, it is usually dissolved in organic solvents (e.g., DMSO/DMF) or aqueous-organic mixtures after deprotection/derivatization. For pH control, select an appropriate buffer system (e.g., phosphate, HEPES) independently of this linker.

Green Alternatives

Sustainability considerations for using THP-PEG4-Boc (literature/general):

  • Solvent choices dominate the environmental footprint. Prefer 2-MeTHF, CPME, EtOAc, MeCN (with solvent recovery) over chlorinated solvents where feasible.
  • Acid deprotections commonly use TFA/DCM; greener variants include:
    • TFA in 2-MeTHF or EtOAc, or HCl in i-PrOH/EtOAc (requires optimization for solubility and rate).
    • Solid-supported acids (e.g., resin-bound sulfonic acids) to simplify workup and reduce acid waste.

Comparison (literature/general):

  • Metric | Conventional | Greener option | Trade-offs
  • — | — | — | —
  • Boc removal | TFA/DCM | TFA/2-MeTHF or HCl/i-PrOH | Rate/solubility may decrease; monitor closely.
  • THP removal | p-TsOH/MeOH | Citric acid/EtOH-H2O or Amberlyst-15 | Longer times; potential incomplete cleavage.
  • Workup | Brine + DCM | EtOAc/MeOH biphasic, reduced chlorinated use | May extract PEG less efficiently.

Additional tips:

  • Implement solvent recycling and microscale scouting to minimize waste.
  • Use aqueous ethanol crystallizations or antisolvent precipitations where applicable to avoid halogenated waste.
  • PEG linkers are generally low-toxicity; focus greener efforts on acid and solvent handling.
Pharmaceutical Uses

Item-specific pharmacopeial or excipient information: Not specified for this item; refer to CoA/Spec Sheet.

General, non-clinical context (literature/general):

  • Protected PEG linkers like THP-PEG4-Boc can serve as process intermediates in the synthesis of conjugates, prodrugs, or surface-modified materials during drug discovery and preclinical research. They are not active pharmaceutical ingredients.
  • Roles may include:
    • Introducing a defined PEG spacer to modulate solubility and reduce aggregation in research compounds.
    • Providing orthogonal protecting-group handles that enable staged assembly of complex architectures.
  • Regulatory note: No pharmacopeial monograph is implied. Any use in GMP or clinical contexts would require independent qualification, impurity profiling, and validation; this listing is for research use only.
Physical Properties

Item-specific values: Not specified for this item; refer to CoA/Spec Sheet.

Typical behavior for PEG4-based protected linkers (literature/general):

  • Physical state: often a waxy solid or viscous oil at room temperature, depending on end-groups and purity.
  • Solubility: good in polar aprotic organic solvents (e.g., DMSO, DMF, NMP, acetonitrile, dichloromethane, THF, EtOAc). Limited intrinsic aqueous solubility for protected forms; PEG chain improves dispersion relative to purely hydrocarbon linkers.
  • Hygroscopicity: PEG chains can be moisture-attracting; handling under dry conditions is advisable to avoid adventitious hydrolysis of THP and Boc groups.
  • Thermal behavior: protected PEG linkers generally lack a sharp melting point and may soften over a range; deprotection occurs under acid rather than thermal conditions.
  • Partitioning: PEG chains lower logP compared to purely alkyl analogs, but Boc and THP caps add hydrophobic character; expect moderate polarity.
  • Spectral identifiers: PEG backbone shows strong IR bands near ~1100 cm⁻1 (C–O–C stretch); Boc tert-butyl gives 1H NMR singlet near 1.4 ppm; THP ring methylenes typically 3.3–4.0 ppm (literature/general).
Quality and Grades

Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

Context and expectations (literature/general):

  • For synthetic linkers used in organic synthesis and bioconjugation, grades typically include:
    • Research/technical grade: suitable for general synthesis; may contain minor residual solvents.
    • ≥95–98% purity (assay): often determined by 1H NMR, LC/MS, and HPLC for small-molecule linkers.
    • LC/MS trace: used to confirm molecular ion and impurity profile.
  • Stabilizers: None are typically required for PEG linkers; however, protection groups like Boc and THP can slowly hydrolyze with moisture/acidic contaminants. Packaging under inert atmosphere and with desiccant is common.
  • What to check on the CoA: assay method and value, water content (Karl Fischer), residual solvents, appearance, and identity confirmation (NMR, MS).
  • Implications for use: Higher purity minimizes background in bioconjugation and surface modification workflows. If performing sensitive downstream coupling, consider pre-drying (vacuum, P2O5 or molecular sieves) and verifying purity by quick HPLC/LC-MS.
Reaction and Applications

Manufacturer application text: Not specified for this item.

Expanded context (literature/general):

  • Orthogonally protected spacer: THP-PEG4-Boc provides a hydrophilic, flexible PEG4 spacer with acid-labile caps on both termini. After selective deprotection, the revealed handles can be used in downstream transformations:
    • Boc → primary amine, enabling amide coupling (HATU/EDC), urea/carbamate formation, or isocyanate capture.
    • THP → primary alcohol, enabling activation to tosylate/mesylate, carbonate formation, CDI activation, or further oxidation to aldehyde/acid.
  • Surface and polymer modification: After deprotection, PEGylated chains reduce nonspecific adsorption on materials or nanoparticles and impart water compatibility.
  • Bioconjugation: The PEG spacer reduces steric hindrance between a ligand and its target surface; staged deprotection allows sequential attachment strategies (e.g., first anchor via amine coupling to a carboxyl surface, then unmask the alcohol for secondary functionalization).
  • Protecting-group strategy: THP and Boc are both acid-labile but often show different labilities under tuned conditions (e.g., short TFA exposures can remove Boc faster than THP), enabling semi-selective workflows (literature/general).
  • Practical tips: Work dry and under inert atmosphere when needed; avoid acid traces during storage/preparative handling to prevent premature deprotection; verify deprotection completion by LC-MS/NMR.
Reaction Conditions

Item-specific conditions: Not specified for this item; refer to CoA/Spec Sheet.

Representative literature/general conditions:

  • Boc deprotection:
    • Reagents: TFA/DCM (1:1 to neat TFA) or HCl/dioxane (4 M).
    • Conditions: 0–25°C, typically 0.5–2 h; monitor by TLC/LC-MS. Quench with scavengers (triethylsilane) if carbocation-sensitive motifs are present.
  • THP deprotection:
    • Reagents: dilute aqueous acid (HCl, AcOH) or p-TsOH in MeOH/THF/H2O.
    • Conditions: 0–25°C, minutes to hours depending on acidity and solvent; avoid prolonged exposure to prevent side reactions.
  • Amide coupling after Boc removal:
    • Solvent: DMF, NMP, DCM (for less polar partners).
    • Base: DIPEA (2–4 equiv) or NMM.
    • Couplers: HATU/HBTU/EDCI with additives (HOAt/HOBt) as permitted by safety policies.
    • Temperature: 0–25°C, 1–16 h; typical isolated yields vary widely (50–90%) depending on substrates.
  • Alcohol activation after THP removal:
    • Tosylation: TsCl, pyridine or DIPEA, DCM, 0–25°C.
    • CDI activation: CDI, DMF/THF, rt; follow with nucleophilic substitution.

Always optimize and confirm on small scale; PEG substrates can alter solubility and phase behavior, affecting kinetics and workup.

Safety and Handling

Authoritative data: GHS classification, signal word, H-statements, and pictograms are Not specified for this item; refer to the SDS.

General safety guidance for protected PEG linkers (literature/general):

  • PPE: wear lab coat, safety glasses, and appropriate gloves (e.g., nitrile). Handle in a fume hood to avoid inhalation of dusts/vapors and exposure to acidic deprotection reagents.
  • Incompatibilities: strong acids can cleave both THP and Boc protecting groups, generating alcohol/amine and volatile byproducts (e.g., isobutylene, CO2) under Boc deprotection. Avoid prolonged exposure to acids, heat, and moisture.
  • Reactivity: stable to mild bases; avoid strong nucleophiles that could displace or transacetalize the THP ether under acidic conditions.
  • First aid (overview; defer to SDS):
    • Skin/eye contact: rinse with water for ≥15 min; remove contaminated clothing; seek medical advice.
    • Inhalation: move to fresh air; seek medical attention if symptoms persist.
    • Ingestion: rinse mouth; do not induce vomiting; seek medical attention.
  • Environmental: prevent release to drains until hazards are established via SDS.
  • Special risks: Although PEGs are generally low hazard, protected linkers can harbor residual coupling reagents/solvent traces; treat as potentially harmful until SDS confirms otherwise.
Solvent Selection

Item-specific solvent data: Not specified for this item; refer to CoA/Spec Sheet.

General guidance for THP/Boc-protected PEG4 linkers (literature/general):

  • Preferred solvents for dissolution and reactions: DMF, DMSO, NMP, acetonitrile, dichloromethane, THF, ethyl acetate. These balance PEG solvation and compatibility with coupling reagents.
  • Water miscibility: Protected end-groups reduce aqueous solubility, but PEG4 provides moderate hydrophilicity. Use co-solvents (DMF/DMSO) for aqueous-organic systems.
  • Deprotection solvent choices:
    • Boc removal: trifluoroacetic acid (TFA) in DCM, DCE, or neat TFA; or HCl/dioxane (literature).
    • THP removal: dilute mineral acids or para-toluenesulfonic acid in MeOH, EtOH, or THF/H2O.
  • When to choose this linker vs alternatives:
    • Choose THP-PEG4-Boc when a temporary protection of both alcohol and amine termini is desired, enabling staged unveiling of functionality with an adjustable ~18-20 Å spacer length (approximate for PEG4; literature/general).
    • Consider PEG2/PEG8 analogs for shorter/longer spacers, or different protecting groups (Fmoc, Cbz, TBDMS) based on orthogonality to your synthetic plan.

Small comparison (literature/general):

  • DCM vs 2-MeTHF: DCM offers excellent solubility for Boc deprotection with TFA; 2-MeTHF is a greener alternative but may require optimization to maintain phase homogeneity.
Storage and Reconstitution

Item-specific storage and shipping:

  • Storage Conditions: Store at -20°C.
  • Shipped In: Ice chest + Ice pads.
  • Research Use Note: For research use only.

Additional handling guidance (literature/general):

  • Protect from moisture and acids to prevent premature THP/Boc cleavage. Keep container tightly closed under dry inert gas if possible. Include desiccant in secondary containment.
  • For short-term use, samples may be kept at 2–8°C during active campaigns; return to -20°C for long-term storage.
  • Avoid repeated freeze–thaw of solutions; prepare single-use aliquots.
  • Reconstitution: Dissolve in anhydrous DMF, DMSO, DCM, THF, or MeCN to prepare stock solutions (common ranges 10–100 mM; adjust to application). Filter if particulates are present.
  • Stability of solutions: In dry, aprotic solvents at 0–4°C, protected linkers are often stable for days to weeks; verify by LC-MS before critical experiments.
  • Disposal: Treat acidic deprotection wastes and chlorinated solvent residues in accordance with institutional and regulatory guidelines.
Structure and Identity

Item-specific data provided: Not specified for this item; refer to CoA/Spec Sheet.

General description (literature/general):

  • THP-PEG4-Boc is commonly understood as a heterobifunctional, protected poly(ethylene glycol) linker featuring:
    • A THP (tetrahydropyranyl) ether protecting group at one terminus, typically masking a primary alcohol (–O–(CH2)5O– from a 2-tetrahydropyranyl group attached via acetal linkage to an alcohol).
    • A Boc (tert-butyloxycarbonyl) carbamate protecting group at the opposite terminus, masking a primary amine (–NH–C(=O)–O–tBu).
    • A PEG4 spacer consisting of four ethylene glycol units [–(CH2–CH2–O)4–], providing hydrophilicity and spatial separation.
  • Structural features (typical for this class): linear, flexible PEG chain, one end capped as a THP ether (acetal-like, acid-labile), the other end as Boc carbamate (acid-labile, amine-protecting). No stereogenic centers expected within the PEG backbone; the THP ring may be substituted at C2 with typical chair conformations.
  • Molecular formula, molecular weight, SMILES, and InChIKey: Not specified for this item; refer to CoA/Spec Sheet.

2D structure in words (literature/general): A central –O–(CH2CH2O)4– chain with its left terminus connected through an oxygen to a tetrahydropyran ring (THP ether) and its right terminus connected through –NH–C(=O)–O–tBu (Boc-protected amine).

Synthetic Utility

General synthetic value (literature/general):

  • Functional group set (protected): THP ether (latent alcohol) and Boc carbamate (latent primary amine) flanking a PEG4 chain. This provides a versatile, bifunctional platform after deprotection.
  • Typical transformations after Boc removal:
    • Amide bond formation with carboxylic acids using HATU, HBTU, EDCI/HOAt/HOBt, or T3P.
    • Reductive amination onto aldehydes/ketones (NaBH3CN, picoline borane) after amine unveiling.
  • Typical transformations after THP removal:
    • Conversion of alcohol to tosylate/mesylate for SN2 displacement to azide, halide, or thiolate.
    • Formation of carbonates/carbamates (e.g., with CDI or p-nitrophenyl chloroformate) to create activated leaving groups.
    • Oxidation to aldehyde (e.g., Dess–Martin, TEMPO/BAIB) enabling oxime/hydrazone ligations after further derivatization.
  • Orthogonality strategy: While both THP and Boc are acid-labile, kinetic selectivity can sometimes allow fast Boc cleavage with minimal THP loss under carefully controlled, short TFA treatments (monitor by LC-MS/NMR).
  • Retrosynthetic utility: Serves as a modular spacer that can be introduced early and unmasked late to unveil handle(s) at desired synthetic stages.
Target Specificity

Not applicable. This product is a small-molecule linker, not an antibody, protein, or oligonucleotide. No target, clone, isotype, or species reactivity is defined. Refer to other sections for its chemical applications.

Preguntas frecuentes

How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is T1445596, the molecular formula is C19H36O8, and the molecular weight is 392.48 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.