Determine the necessary mass, volume, or concentration for preparing a solution.
RNA exists in diverse types and sources, and is isolated by various preparation methods, including the phenol method, detergent method and guanidine hydrochloride method. Among them, the phenol method is the most widely used. This RNA‑extraction reagent contains phenol, guanidinium isothiocyanate and other components. It rapidly lyses cells or tissues and inactivates nucleases to maintain RNA integrity. After adding chloroform and centrifugation, the solution separates into an upper aqueous phase (colorless), an interphase, and a lower organic phase (red). Total RNA is recovered by isopropanol precipitation from the upper aqueous phase; DNA is recovered by ethanol precipitation from the interphase; and proteins are recovered by isopropanol precipitation from the lower organic phase.
The Tissue & Cell RNA Extraction Kit (One‑step Extraction Method) is designed for rapid isolation of total RNA from various tissues or cells. It is compatible with both small‑scale samples (50‑100 mg tissue, 5×10⁶ cells) and large‑scale samples (>1 g tissue / >10⁷ cells). The extracted total RNA is of high quality and can be applied in Northern Blot, Dot Blot, polyA selection, in‑vitro translation, RNase protection assay and molecular cloning. This kit features: ① broad applicability; ② simple operation, with the whole procedure completed within 1 hour; ③ high purity; ④ low contamination. This kit is for research‑only purposes and shall not be used for clinical diagnosis or any other applications.
Component
Note: Each component is individually packaged according to its storage temperature (Room temperature/2‑8 °C) upon shipment, with differentiated temperature‑controlled transportation to guarantee product performance. Orders containing materials requiring multiple temperature zones may be delivered in separate batches; please refer to the actual received goods. Upon receipt, store components separately at the temperatures specified in the component list. The shelf‑life is 12 months from the date of manufacture. |
Operating Procedures
1.Sample Preparation
① Adherent cells: Direct lysis: Add RNA extraction reagent directly into the culture flask/dish to lyse cells at 1 mL per 10 cm² growth area, and mix thoroughly by pipetting.
Trypsin digestion: Wash cells with sterile PBS, then treat cells with PBS containing 0.05‑0.25% trypsin. After cells detach from the vessel surface, add serum‑supplemented medium to terminate the reaction. Transfer the cell suspension into an RNase‑free centrifuge tube, and follow the procedures for suspension cells below.
② Suspension cells: No cell washing is required. Centrifuge at 5000‑6000 g for 5 min to collect cell pellet and discard supernatant. Ensure complete removal of cell culture medium; incomplete removal will cause insufficient lysis and reduced RNA yield. Add 1 mL RNA extraction reagent per 5×10⁶‑10⁷ animal, plant or yeast cells, or per 10⁷ bacterial cells, and mix thoroughly by vortexing.
③Tissues: Use fresh animal/plant tissues or tissues stored at −70 °C. Fully grind 50‑100 mg tissue in liquid nitrogen, or grind with 1 mL RNA extraction reagent, or homogenize using a homogenizer. The sample volume should generally not exceed 10% of the volume of RNA extraction reagent. Complete grinding rapidly, ideally within 1 min.
④Blood: Take 0.5‑1 mL fresh or frozen blood. Centrifuge at 12000 g for 5 min and discard plasma. Add 1 mL RNA extraction reagent and mix thoroughly by vortexing.
2.Nucleic Acid Separation
Vortex thoroughly. (Alternative: freeze‑thaw 1‑3 times by placing in low‑temperature / ultra‑low‑temperature freezer for 5‑10 min followed by thorough vortexing each time). Incubate the lysed sample or homogenate at room temperature for 5‑10 min to achieve complete dissociation of nucleoprotein and nucleic acids.
3. Sample Phase Separation
Add 0.2 mL RNA separation solution, vortex for 15 s, incubate at room temperature for 2‑3 min, then centrifuge at 12000 g, 4 °C for 10‑15 min. The upper layer is aqueous phase; the interphase and lower layer are organic phase. RNA resides in the upper aqueous phase.
4. RNA Precipitation
Transfer the upper aqueous phase (~500 μL) into an RNase‑free centrifuge tube. Do not aspirate any material from the interphase to avoid genomic DNA contamination. Add an equal volume of RNA precipitation solution and mix well. Incubate at room temperature for 15‑20 min. Centrifuge at 12000 g, 4 °C for 10 min. A gelatinous precipitate forms on the side or bottom of the tube; discard the supernatant.
5. RNA Washing
Add 1 mL RNA washing solution to gently wash the precipitate. Incubate at room temperature for 5‑10 min. Centrifuge at 7500 g, 4 °C for 5 min and discard supernatant. Air‑dry at room temperature for 5‑10 min. Avoid over‑drying, otherwise RNA will be difficult to dissolve.
6. RNA Dissolution
Add 30‑50 μL RNase‑free ddH₂O for full dissolution. Store long‑term at −70 °C or use directly in downstream experiments. For samples with high RNase content such as liver, pancreas and kidney tissues, dissolve the precipitate with RNA preservation solution.
Analysis and Quantitation
1. Determine RNA quality by measuring absorbance at 260 nm and 280 nm. Calculate RNA yield using the conversion factor: 1 OD = 40 μg/mL RNA. An OD₂₆₀/OD₂₈₀ ratio of 1.8‑2.0 indicates good RNA purity. Samples with concentration ≥4 μg/mL are suitable for spectrophotometric measurement.
2. Perform formaldehyde‑denaturing agarose gel electrophoresis to assess RNA integrity and contamination status.
3. Determine RNA quality and purity using a nucleic acid analyzer.
Troubleshooting
|
Precautions
1. Sample storage: After mixing with RNA extraction reagent, samples can be stored at −70 °C for 1‑2 months. RNA samples can be stored in 70% ethanol at −70 °C for 2‑4 weeks. For long‑term storage, keep samples in an ultra‑low‑temperature freezer.
2. RNA extraction reagent and RNA separation solution contain corrosive substances. In case of skin or eye contact, immediately flush with clean water or normal saline, and seek medical assistance if necessary.
3. For personal safety and health, wear a lab coat and disposable gloves during operation.
4. Use reagents promptly after opening to avoid compromising downstream experimental results.
Note: Each component is individually packaged according to its storage temperature (Room temperature/2‑8 °C) upon shipment, with differentiated temperature‑controlled transportation to guarantee product performance. Orders containing materials requiring multiple temperature zones may be delivered in separate batches; please refer to the actual received goods. Upon receipt, store components separately at the temperatures specified in the component list. The shelf‑life is 12 months from the date of manufacture. |
Nuestra guía de selección de calidades cubre la pureza, el estado del estabilizador y la idoneidad de la aplicación para todas las variantes de nuestro catálogo.
Ver la guía de calidades BioReagent →