CALIDAD & PUREZAMoligand™?Moligand™ — Aladdin's line of ligands and bioactive small molecules. Use for receptor, pathway, and binding studies needing defined small-molecule tools.≥98%
URB937 is an orally active and peripherally restricted FAAH inhibitor (IC50=26.8 nM) and increases anandamide levels. URB937 fails to affect FAAH activity in the brain (not penetrate the blood-brain barrier).
This compound belongs to the class of organic compounds known as biphenyls and derivatives. These are organic compounds containing to benzene rings linked together by a C-C bond.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reseñas
Reseñas de cliente
Application Protocols
No vendor-validated protocols are provided for this item. The following is general guidance for small-molecule inhibitor handling in research contexts; adjust to your system.
Example workflow (biochemical enzyme inhibition):
Prepare a 10 mM stock in anhydrous DMSO. Aliquot to single-use vials to avoid freeze–thaw.
Generate a 10-point 1:3 serial dilution in assay buffer with constant 1% DMSO. Include vehicle-only and positive control wells.
Incubate compound with enzyme for 15–30 min at 25–37°C, then initiate reaction with substrate. Monitor product formation (fluorescence, absorbance, or LC-MS). Fit inhibition curves (four-parameter logistic) to obtain IC50.
Example workflow (cell-based target engagement):
Treat cells with 0.03–10 µM compound for 1–4 h with ≤0.1–0.5% DMSO final. Assess pathway biomarkers or perform CETSA/ABPP where applicable.
Analytical QC:
Verify stock concentration by UV or quantitative NMR where possible. Assess short-term stability in assay buffer at working concentration and time scale.
Controls:
Include orthogonal inhibitors and, where available, inactive analogs. Maintain constant vehicle and plate layout to control for edge effects.
Note: Concentration ranges and times are general literature guidance, not item specifications.
Biological Roles
Biological and mechanistic context (literature/general; verify target details for URB 937 in your application):
URB-series compounds are widely cited as modulators of lipid amidase pathways, particularly within the endocannabinoid system. Inhibition of serine hydrolases such as FAAH (fatty acid amide hydrolase) is a common mechanistic theme for related molecules, which can elevate endogenous fatty acid amides (e.g., anandamide) in biological systems (literature context).
Such ligands are used to probe the regulation of nociceptive, inflammatory, and metabolic signaling in preclinical models and in vitro systems. Their effects are typically assessed via biochemical activity assays, lipidomics (LC-MS/MS quantification of amide substrates/products), and receptor pathway readouts.
Selectivity profiling against serine hydrolase panels and off-target enzymes (e.g., MAGL, other amidases) is critical to attribute observed biological outcomes to on-target engagement; techniques include ABPP, thermal shift, and competitive binding assays.
Important caveats:
Exact target specificity, potency (IC50/Ki), and selectivity profile for this item are not specified here—consult primary literature for URB 937 and validate experimentally in your system.
All uses are for research only; no clinical or diagnostic claims are made.
Buffer Applications
URB 937 is not a buffering reagent. Therefore, traditional buffer system recipes (e.g., phosphate, Tris, HEPES) are not applicable.
Practical handling in buffered systems (general guidance):
Prepare concentrated DMSO stocks and dilute into assay buffer to a final DMSO content typically ≤1–2% v/v to minimize solvent effects on protein function.
To reduce precipitation, consider adding 0.01–0.05% nonionic surfactant (e.g., Tween-20) or using serum-containing media for cell-based assays, if compatible with your readout.
Maintain constant vehicle concentration across control and treatment conditions. Pre-clear solutions by brief centrifugation or 0.22 µm filtration when analytical compatibility permits.
Green Alternatives
As a bioactive research ligand, URB 937 itself is not typically substitutable by a “green” chemical equivalent without altering biological outcomes. However, aspects of the workflow can be optimized for greener practice.
Solvent and process considerations (general guidance):
Prefer lower-toxicity solvents for sample prep where feasible: replace DMF with ethanol or isopropanol for preliminary solubility screening if compatible.
Minimize DMSO usage by preparing higher-concentration aliquots and using microvolumes to achieve final assay concentrations ≤1% DMSO v/v.
For chromatography, consider water-rich gradients and volatile buffers (e.g., ammonium formate/acetate) to reduce hazardous waste.
Implement miniaturized assay formats (384/1536-well) to reduce solvent and compound consumption.
Trade-offs:
Greener solvents may compromise solubility or assay performance; verify with small-scale tests.
Reduced DMSO levels can increase precipitation risk—mitigate by adding surfactant or protein carriers when assay-compatible.
Waste management:
Segregate halogenated vs non-halogenated organic waste. Use adsorbent-based spill kits suitable for organic solvents. Follow institutional and local regulations for disposal.
Pharmaceutical Uses
This product is supplied strictly for research use and is not an excipient or approved active ingredient.
Relevant research-oriented contexts:
Reference standard: May be used as an analytical standard in bioanalytical method development/validation for preclinical samples, subject to appropriate in-house qualification.
Lead discovery: As a ligand, URB 937 can serve in SAR benchmarking, target validation, and as a positive control in screening cascades (biochemical and cell-based) when aligned with the specific enzyme/pathway under study.
Non-applicable aspects:
No pharmacopeial monograph or compendial status is provided. No dosage form, GMP manufacturing, or clinical application information is available for this item.
Compliance note:
Any use in manufacturing or clinical contexts would require separate qualification, supply chain controls, and regulatory review; such uses are outside the scope of this research reagent.
Physical Properties
Item-specific physical data:
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Melting point (MP): Not specified for this item; refer to CoA/Spec Sheet.
Boiling point (BP): Not specified for this item; refer to CoA/Spec Sheet.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Solubility: Not specified for this item; refer to CoA/Spec Sheet.
Refractive index/UV cutoff: Not specified for this item; refer to CoA/Spec Sheet.
LogP/pKa: Not specified for this item; refer to CoA/Spec Sheet.
General guidance (literature/class-based, not item specifications):
Bioactive small molecules in this class are commonly handled as DMSO stock solutions (e.g., 10–50 mM) due to limited aqueous solubility; aqueous working solutions may require co-solvent (DMSO ≤1–2% v/v) or serum-containing media.
Many aromatic carbamate-like inhibitors are neutral and hydrophobic at physiological pH, with low intrinsic water solubility and good solubility in polar aprotic organics (DMSO, DMF, acetone, acetonitrile).
Always verify solubility and purity with your lot-specific CoA prior to use and adjust stock concentrations accordingly.
Quality and Grades
Item-specific grade:
Grade/Purity: Moligand™ (as provided; no numerical purity specified).
What Moligand™ typically implies (general description, not item-specific specs):
Moligand™ products are designed for use as small-molecule ligands in discovery workflows, including biochemical/biophysical screening, target validation, and chemical biology. Emphasis is placed on identity confirmation and suitability for research assays.
Practical expectations and verification:
Identity/purity confirmation should be taken from the lot-specific CoA (e.g., NMR, MS, HPLC/UPLC). Because no purity percentage or stabilizer details are provided here, treat as: Not specified for this item; refer to CoA/Spec Sheet.
For sensitive assays (SPR/ITC, cellular phenotyping), analysts often require low-residue solvents and well-characterized impurity profiles; if needed, consider in-house re-verification (qNMR, HRMS) upon receipt.
If low UV background is required for chromatography-based readouts, confirm UV absorbance profile from CoA or pre-test; no UV cutoff is provided for this item.
Documentation and traceability:
Keep the product label, lot number, and CoA archived with experimental records. Where regulatory submissions or reference controls are involved (e.g., bioanalytical standard preparation), document any additional in-house qualification steps.
Reaction and Applications
Manufacturer Applications: Not specified in the Product Data.
Research use context (general, for small-molecule ligands):
URB 937 is commonly used as a bioactive tool compound in enzymology and chemical biology. Typical applications include enzyme activity modulation studies, inhibitor potency ranking, and pathway interrogation in lipid signaling research. Always confirm the precise target and mechanism from primary literature and your CoA.
Analytical/assay workflows:
Biochemical inhibition assays (e.g., fluorogenic/LC-MS substrate turnover) to measure enzyme activity in cell lysates or purified preparations.
Target engagement in cells using CETSA, NanoBRET, or activity-based protein profiling (ABPP) with orthogonal probes (general approaches for serine hydrolases; verify compatibility).
Quantitative bioanalysis: preparation of calibration curves and QC samples in organic/aqueous matrices for LC-MS/MS method development.
Practical notes:
Prepare DMSO stocks and maintain constant final DMSO percentage across assay wells to avoid solvent-driven artifacts.
Include vehicle controls and orthogonal inhibitors to confirm on-target effects.
Pre-screen solubility and stability under assay conditions (pH, temperature, time) to avoid false negatives due to precipitation or hydrolysis.
Limitations:
This product is provided for research use only; it is not intended for diagnostic, therapeutic, or in vivo clinical use.
Reaction Conditions
Not typically applicable. URB 937 is used as a bioactive ligand in assays rather than as a reagent/substrate in preparative organic reactions.
Assay-condition guidance (general, literature-based for small-molecule enzyme inhibitors; not item-specific specs):
Stock preparation: Dissolve in anhydrous DMSO at 10–50 mM; aliquot and store at −20°C.
Biochemical assays: Typical working concentrations span from low nanomolar to low micromolar depending on target potency. Maintain constant DMSO (≤1–2% v/v). Incubation times of 10–60 min at 25–37°C are common; optimize to reach steady-state inhibition.
Cell-based assays: Titrate concentrations to minimize off-target/cytotoxic effects; common ranges are 0.03–10 µM. Use serum-containing media to improve solubilization if compatible.
Analytical characterization: LC-MS/MS with water–acetonitrile gradients and volatile buffers (e.g., 0.1% formic acid) is typical for quantitation and stability testing.
Always confirm exact conditions empirically for your system and consult the SDS for safe handling.
Safety and Handling
Authoritative safety data are provided in the product SDS; consult the SDS before use.
Item-specific hazard information:
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
GHS Classification/Pictograms: Not specified for this item; refer to SDS.
General laboratory precautions (good practice):
Handle in a chemical fume hood; avoid inhalation and contact with skin/eyes. Use standard PPE: lab coat, nitrile gloves, safety glasses or goggles.
Prevent dust formation and aerosol generation during weighing. For DMSO concentrates, avoid skin exposure because DMSO can facilitate dermal absorption of solutes.
Storage incompatibilities: Keep away from strong oxidizers and strong acids/bases that may degrade carbamate/amide functionalities. Protect from moisture if the compound is hydrolytically sensitive (general for this class).
First aid (general): In case of skin/eye contact, rinse with water for at least 15 minutes; seek medical attention if irritation persists. If inhaled, move to fresh air; if swallowed, rinse mouth and seek medical advice.
Waste: Dispose as organic hazardous waste according to institutional and local regulations.
Special risks (class-level):
Bioactive ligands may affect enzyme activity in biological samples; avoid exposure and environmental release. No data provided regarding sensitization, mutagenicity, or aquatic toxicity for this specific item—consult SDS.
Solvent Selection
Item-specific solubility is not provided; consult the CoA. The guidance below is based on typical behavior of hydrophobic, aromatic enzyme inhibitors and is not an item specification.
General selection strategy:
Primary stock solvent: DMSO is commonly preferred due to broad solubilizing power for hydrophobic ligands and compatibility with biochemical and cell-based assays (typical stocks 10–50 mM).
Alternative solvents: DMF or acetonitrile for analytical injections; ethanol or methanol for certain biological assays (evaluate cytotoxicity). Cosolvent systems (DMSO + aqueous buffer, 0.1–2% DMSO v/v) are typical for working solutions.
Aqueous media: Expect limited direct water solubility for this class. Employ surfactant-containing buffers (e.g., 0.01–0.05% Tween-20) or protein-containing media to mitigate precipitation; confirm compatibility with assay readouts.
Comparison notes (general):
DMSO vs DMF: DMSO is more biocompatible, but DMF may offer higher solubility; DMF is less favored in live-cell contexts.
Acetonitrile: Excellent for LC analysis; limited for biological assays due to volatility and cytotoxicity at >0.5–1%.
Ethanol: Useful in some biochemical assays; watch for enzyme activity modulation.
Practical tips:
Warm gently (≤37°C) and sonicate to dissolve; filter (0.22 µm PTFE) if preparing analytical standards. Avoid repeated freeze–thaw by aliquoting concentrated stocks.
Storage and Reconstitution
Item-specific conditions (from Product Data):
Storage Conditions: Store at −20°C.
Shipped In: Ice chest + Ice pads.
Practical storage guidance:
Upon receipt, allow the shipment to equilibrate to room temperature in a desiccated environment before opening to prevent condensation. Reseal promptly after aliquoting.
For solids: If provided as a solid, keep tightly closed under dry, inert conditions where feasible. For solutions: Store in high-quality, low-leachate vials (amber, PTFE-lined caps) to minimize adsorption and photodegradation.
Reconstitution (general guidance; not item-specific specs):
Prepare concentrated stocks in anhydrous DMSO (e.g., 10–50 mM). Vortex and, if needed, warm gently (≤37°C) or sonicate briefly to fully dissolve. Filter through 0.22 µm PTFE for analytical applications if compatible.
Aliquot into single-use volumes to avoid repeated freeze–thaw. Store aliquots at −20°C protected from light and moisture.
Before use, thaw on ice or at room temperature; mix thoroughly. Inspect for precipitation or discoloration; if observed, prepare fresh solution.
Stability notes:
No stabilizer or shelf-life data are provided for this item; refer to CoA/Spec Sheet. For best results, minimize exposure to air, moisture, and light, and limit bench-time of DMSO stocks.
Structure and Identity
URB 937 is a small-molecule research ligand commonly used as a biochemical tool in enzyme inhibition studies.
Item-specific (from Product Data):
SKU: U351248
Product Name: URB 937
CAS: 1357160-72-5
PubChem CID: 53394762
InChIKey: 47844 (as provided)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
General literature context (not item-specific specs):
Compound class: Small-molecule bioactive ligand; frequently referenced as an inhibitor in lipid amidase biology.
Typical structural features reported for this class: Aromatic core with a carbamate/urea-like electrophilic motif used to engage serine hydrolase active sites (literature, class description). Specific substituent patterns for URB 937 should be confirmed from primary literature/CoA.
2D structure description (general, literature-based for class):
A planar/aromatic scaffold bearing an electrophile-capable functional group (e.g., carbamate-type) and a hydrophobic moiety that supports membrane partitioning and enzyme affinity. Exact atom connectivity and stereochemistry for URB 937 must be verified against the official structural record; consult the product CoA/Spec Sheet.
Synthetic Utility
URB 937 is a finished bioactive ligand and is not typically employed as a synthetic building block.
General considerations (if repurposed in synthesis research):
The presence of carbamate/amide-like functionalities (class-level expectation) suggests potential sensitivity to strong acids/bases and nucleophiles; prolonged exposure can lead to hydrolysis or transcarbamoylation (general organic chemistry). Such transformations would compromise bioactivity and are generally undesirable for stock handling.
If derivatization is intended for probe development (e.g., biotinylation, photoaffinity tags), a structure-informed approach is required to identify positions tolerated by the target without loss of potency. This must be guided by definitive structural information and SAR from primary literature; none is provided here.
Recommendation:
Treat URB 937 as a terminal tool compound rather than a precursor. For synthetic campaigns, source or design appropriate intermediates with known points of diversification.
Target Specificity
Item-specific target details are not provided in the Product Data.
Not specified for this item; refer to CoA/Spec Sheet and primary literature for:
Selectivity profile across related enzymes or off-targets
Recommendation:
Verify target specificity in your system using orthogonal assays (e.g., biochemical activity, ABPP, CETSA) and include appropriate positive/negative controls.
Preguntas frecuentes
What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
What is Moligand??
Moligand? is one of Aladdin Scientific's premium product lines, formulated for high-purity applications across multiple workflows. Compared to standard grades in the same workflow, Moligand? products typically offer tighter specifications, more rigorous QC, and stronger lot-to-lot consistency.
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1357160-72-5, the molecular formula is C20H22N2O4, and the molecular weight is 354.4 g/mol. InChIKey CMEQHOXCIGFZNJ-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
¿Necesita ayuda para elegir la calidad?
Nuestra guía de selección de calidades cubre la pureza, el estado del estabilizador y la idoneidad de la aplicación para todas las variantes de nuestro catálogo.
Utilizamos cookies para garantizar el correcto funcionamiento del sitio web y, cuando esté permitido, para mejorar su experiencia. Puede gestionar sus preferencias en cualquier momento en Configuración. Más información en nuestra Política de Cookies.
¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?
Recordármelo más tarde
¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.