Determine the necessary mass, volume, or concentration for preparing a solution.
Methylene blue, also known as methylthioninium chloride, basic blue 9, etc., has the molecular formula C₁₆H₂₄ClN₃O₃S (hydrated form), a molecular weight of 373.9, and a CAS number of 7220-79-3.
Methylene blue staining solution is commonly used for staining silk, paper, bacteria, cells, etc. Because it is easily oxidized, staining results are not suitable for long-term storage.
Procedure (for reference only):
1. Sample Processing
① Paraffin sections
Deparaffinize in xylene for 5–10 min.
Replace with fresh xylene and deparaffinize again for 5–10 min.
Immerse in anhydrous ethanol for 5 min.
Rinse in distilled water for 2 min.
② Frozen sections
Rinse in distilled water for 2 min.
③ Cultured cells
Fix with 4% paraformaldehyde for at least 10 min.
Wash with distilled water for 2 min.
Replace with fresh distilled water and wash again for 2 min.
2. Methylene Blue Staining
Stain with Methylene Blue Staining Solution (2%) for 3–10 min (the time can be adjusted according to the staining results and requirements).
Wash thoroughly with distilled water or tap water, then observe and photograph.
Staining Results:
Tissues or cells: blue
Precautions:
1.When using this reagent for the first time, it is recommended to perform a preliminary experiment with 1–2 samples.
2.For your safety and health, please wear a lab coat and disposable gloves during operation.
3.This product is for research use only and must not be used for any other purposes.
| Sensibilità | Light-sensitive |
|---|---|
| Punto di fusione (°C) | 235°C |
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
H373:May causes damage to organs through prolonged or repeated exposure
H302:Harmful if swallowed
P261:Avoid breathing dust/fume/gas/mist/vapors/spray.
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P280:Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352:IF ON SKIN: wash with plenty of water.
P321:Specific treatment (see ... on this label).
P405:Store locked up.
P501:Dispose of contents/container to an approved waste disposal plant.
P264:Wash hands [and …] thoroughly after handling.
P260:Do not breathe dust/fume/gas/mist/vapors/spray.
P271:Use only outdoors or in a well-ventilated area.
P270:Do not eat, drink or smoke when using this product.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P362+P364:Take off contaminated clothing and wash it before reuse.
P330:Rinse mouth.
P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.
P301+P317:IF SWALLOWED: Get medical help.
P337+P317:If eye irritation persists: Get medical help.
P332+P317:If skin irritation occurs: Get medical help.
P319:Get medical help if you feel unwell.
Formal, item-validated protocols are not provided in the product data. The following are general literature/good-practice outlines for a 2% stock used as a stain. Adjust to your samples and safety rules.
Simple cell/bacteria stain (brightfield):
Agarose gel DNA stain:
Redox indicator demo:
Tissue sections (general):
Notes:
These are general guidelines, not item-specific validated protocols.
This section summarizes literature context for the active dye methylene blue; it does not describe medical/clinical use.
Charge-driven interactions: As a cationic phenothiazinium dye, methylene blue associates with negatively charged biomolecules (nucleic acids, acidic polysaccharides) and cell surfaces, enabling contrast in light microscopy.
Nucleic acid affinity (literature): Intercalative and electrostatic interactions with DNA/RNA yield visible staining under white light. Binding strength and spectral properties depend on ionic strength, pH, and crowding agents.
Protein/tissue interactions: Prefers acidic tissue components; often accentuates nuclei and certain granules. Limited penetration into highly hydrophobic domains without surfactants or permeabilization.
Redox activity: Engages in reversible redox cycling (MB ↔ leucomethylene blue), which can report on cellular reducing environments. This underlies its use as a redox indicator in microbiology and biochemical assays.
Photochemical behavior: Upon illumination in the presence of oxygen, acts as a photosensitizer capable of generating reactive oxygen species (e.g., singlet oxygen). In biological contexts, this can lead to photobleaching of the dye and photo-oxidation of nearby biomolecules (hence light protection is recommended during storage).
Aggregation: Exhibits concentration-dependent dimerization/aggregation in aqueous media, altering absorption maxima and apparent staining intensity (literature). Dilution and ionic composition can tune monomer–dimer equilibria for consistent staining outcomes.
Note: The above are general literature characteristics of methylene blue and may vary with formulation; consult your own controls for your specific matrix and protocol.
This product is a staining solution, not a buffering reagent.
Practical guidance:
Consider environmental, safety, and waste aspects when choosing stains and nucleic acid visualization methods.
Comparison (literature/general; suitability depends on assay):
Aqueous basic stains
Nucleic acid gel stains
Redox indicators
Waste minimization tips:
No pharmaceutical or clinical applications are claimed for this product. It is supplied strictly for research and laboratory use.
Contextual/literature notes (non-claims):
This product is a BioReagent-grade 2% solution and should not be used for any human or veterinary applications. For any regulated diagnostic or GMP manufacturing, obtain grade-appropriate materials and documentation (e.g., USP/EP grade, DMF, or CQ documentation) and validate suitability.
Item-specific physical specifications for this 2% solution are not provided in the product data.
Literature/general properties of the active dye (methylene blue) — for context only:
Note: Use the specific batch CoA/Spec Sheet for any quantitative property needed for regulated/validated methods.
Supplied grade: BioReagent — intended for laboratory research and life-science workflows. This designation generally indicates control of common biological contaminants and consistency suitable for staining/imaging and routine biochemical procedures. It is not a clinical/diagnostic grade and is not intended for therapeutic use.
What BioReagent typically implies (general):
This item (2% solution) — specification notes:
Verification & documentation:
Related grades (context, not supplied here): Analytical Reagent (AR), HPLC, ACS, or USP/NF grades have different intents and control criteria; choose based on assay requirements and regulatory context.
Focused on laboratory staining and analytical uses rather than synthetic reactions.
Microscopy/simple staining (general):
Microbiology (general):
Nucleic acid/gel staining (literature practice):
Photochemical/analytical roles (literature):
Practical tips:
General literature guidance for uses of methylene blue (active dye); adjust to your system and consult primary references.
Photochemical oxidations (literature):
Redox indicator assays (literature):
MBAS assay for anionic surfactants (literature):
Gel staining (laboratory practice):
Note: The above are general guidance ranges from literature/typical practice and are not item-specific specifications. Optimize empirically for your substrate, path length, and instrumentation.
Authoritative hazard classification for this specific 2% solution is not provided in the product data.
Always consult the product’s SDS for official hazard, exposure limits, and emergency procedures.
This product is a ready-to-use aqueous 2% staining solution. Solvent selection is typically not required unless you plan to dilute or rinse.
Polarity/miscibility (general):
When to dilute in buffer vs. water:
Rinsing/destaining:
Comparison (general context):
Handling and longevity (general best practices):
Compatibility and dilution:
Item-specific parameters not provided:
Always consult the product label and SDS for any additional storage cautions or incompatibilities.
A ready-to-use 2% aqueous staining solution formulated with the cationic phenothiazinium dye commonly known as methylene blue (MB), supplied for life-science staining workflows.
Structural features of the active dye (methylene blue) — literature description:
Identifiers for methylene blue (active dye) — literature values (for reference only; not item-specific):
Note: Because this listing is for a prepared 2% solution, batch-specific identifiers (exact salt form, pH, excipients) should be taken from the item’s CoA/Spec Sheet.
While primarily a biological stain, the active dye methylene blue has recognized roles in chemical methodology (literature context).
Photoredox catalysis: Serves as an organic photosensitizer for visible-light-driven oxidations (e.g., aerobic oxidative coupling, sulfide to sulfoxide conversions) via generation of singlet oxygen or electron-transfer pathways. The cationic nature can influence substrate association in polar media.
Redox mediator: Useful as an electron shuttle in electrochemical setups and biochemical model systems; reversible MB/leucomethylene blue couple provides a convenient spectroscopic handle around 660–668 nm.
Analytical chemistry: Acts as a reporter dye in methylene blue active substances (MBAS) assays for anionic surfactants; ion-pair formation and extraction underpin the method.
Practical note for this 2% solution: For synthetic/analytical uses requiring defined molarity, determine concentration by UV–Vis using an appropriate extinction coefficient (literature) because mass% of the solution may not directly translate to molarity without density and exact salt/hydration details. Alternatively, prepare standard curves versus known MB standards.
Compatibility: Best in aqueous or mixed polar solvents; strong reducing agents will bleach the dye, terminating photoredox cycles unless reoxidized by air or an oxidant.
Not applicable. This product is a general staining solution and is not an antibody, probe, or affinity reagent with defined target specificity.
La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.
Visualizza la guida alle qualità BioReagent → Visualizza la guida alle qualità Biological Stain →