Thiol PEG Amine, HS-PEG-NH2 - MW 10000 Da

Cat. No.: T164364
Disponibile su ordine
QUALITÀ & PUREZZA MW 10000 Da
Storage
Protected from light,Store at -20°C,Argon charged
Shipped In
Ice chest + Ice pads
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
100mg
T164364-100mg
—
2 Disponibile

112,72€

169,12€
Salva 56,40 € (33.35%)
500mg
T164364-500mg
—
3 Disponibile

273,25€

410,35€
Salva 137,10 € (33.41%)
Enter a quantity for the sizes you want to add.

Panoramica

Heterobifunctional PEG derivative that can be used to modify proteins, peptides and other materials via amino or other acid reactive chemical groups. PEGylation can increase solubility and stability and reduce immunogenicity of peptides and proteins. It can also suppress the non-specific binding of charged molecules to the modified surfaces. .

Specifiche

Specifiche e purezza
MW 10000 Da
Condizioni di conservazione di stoccaggio
Protected from light,Store at -20°C,Argon charged
Spedito in
Ice chest + Ice pads
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

5 results found

Lot NumberCertificate TypeDataOggetto
I2517515I2517515Certificate of AnalysisJul 06, 2026 T164364
I2517517I2517517Certificate of AnalysisJul 06, 2026 T164364
H2224477H2224477Certificate of AnalysisJul 03, 2026 T164364
L2427141L2427141Certificate of AnalysisMar 13, 2024 T164364
H2224476H2224476Certificate of AnalysisJun 07, 2023 T164364
Proprietà chimiche e fisiche
SolubilitàOff-white/white solid or viscous liquid depends on molecule weight;Soluble in regular aqeous solution as well as most organic solvents;
SensibilitàLight sensitive;Moisture sensitive
Domande frequenti e articoli
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

The following are example, literature-based protocols for HS-PEG-NH2; adapt to your system. Item-specific tested applications and dilutions are not provided.

  • A. Maleimide conjugation then amine derivatization:

    1. Dissolve HS-PEG-NH2 at 10–50 mM in anhydrous DMSO. Prepare target maleimide conjugate in PBS/HEPES pH 6.8–7.0, 0.1–1 mM EDTA, degassed.
    2. Add DMSO stock to the aqueous target to 100–500 µM final; incubate 1 h at RT.
    3. Desalt to remove unreacted PEG and DMSO. Verify completion by Ellman’s assay (should be negative for free thiol).
    4. Use exposed –NH2 for subsequent NHS ester labeling in pH 7.5–8.5 buffer.
  • B. Amide coupling to activated carboxyls:

    1. Activate carboxyl partner with EDC/NHS in MES pH 5–6; then exchange into pH 7.5–8.0 buffer.
    2. Add HS-PEG-NH2 (1.2 eq), react 1 h at RT. Avoid amine buffers (Tris).
    3. Purify by SEC/UF; characterize by SEC-HPLC.
  • C. Gold surface functionalization:

    1. Clean Au surface, immerse in 0.1–1 mM HS-PEG-NH2 in ethanol/water (degassed) for 12–24 h.
    2. Rinse thoroughly; the surface now presents –NH2 for further coupling (e.g., NHS–carboxyl chemistry).
  • Notes: Maintain inert atmosphere during preparation; minimize oxygen exposure to preserve thiol functionality.

Biological Roles
  • Item-specific: No biological role is specified for this product; it is for research use only.

  • Literature/general context for PEG linkers:

    • PEG is considered biologically inert and hydrophilic, reducing nonspecific protein adsorption and immunogenic recognition relative to hydrophobic linkers.
    • PEGylation of surfaces and macromolecules can improve colloidal stability, decrease aggregation, and modulate biodistribution in research models (no clinical claims).
    • The amine terminus can be used to attach biomolecules (e.g., activated carboxyls of proteins/ligands), while the thiol terminus selectively reacts with cysteine residues or maleimide-tagged partners, enabling site-selective bioconjugation strategies.
    • In enzymology and assay development, PEG spacers can reduce steric hindrance, preserving activity of immobilized enzymes or antibodies by distancing them from surfaces.
    • For nucleic-acid work, PEGylated constructs can modulate hybridization kinetics and reduce aggregation of nanoparticle–oligo conjugates.
  • Practical considerations:

    • Buffer composition and pH control end-group protonation: protonated amines (lower pH) are less nucleophilic; deprotonated thiolates (higher pH) are more nucleophilic but oxidize faster. Optimize within narrow windows for selectivity.
    • Include metal chelators (e.g., EDTA) to limit radical/metal-catalyzed thiol oxidation in biological buffers.
Buffer Applications

This material is not itself a buffering agent. However, buffer choice critically governs its conjugation performance.

  • Literature/general buffer guidance:

    • Thiol–maleimide coupling: pH 6.5–7.2 in phosphate or HEPES, 0–150 mM NaCl; 0.1–1 mM EDTA; degassed to limit oxidation. Reaction typically proceeds at room temperature in 0.5–2 h.
    • Amine coupling to NHS esters/activated acids: pH 7.5–8.5 (borate 50–100 mM, phosphate/bicarbonate acceptable). Avoid primary amine-containing buffers (e.g., Tris, glycine) which compete with coupling.
    • Disulfide reduction (if needed): Reduce with TCEP in acetate/phosphate pH 7.0–7.5; remove excess TCEP prior to maleimide reactions.
    • Storage buffers: For short-term aqueous handling, use oxygen-depleted buffers with EDTA; keep on ice and use promptly.
  • Practical recipes (example scales):

    • Phosphate buffer, pH 6.8: 50 mM Na2HPO4/NaH2PO4, 100 mM NaCl, 0.5 mM EDTA; sparge 20–30 min with argon.
    • Borate buffer, pH 8.3: 50 mM sodium borate, 100 mM NaCl; oxygen-sparged; no primary amines present.
  • Item-specific: No buffer composition is specified for this product; select based on your coupling chemistry.

Green Alternatives

HS-PEG-NH2 is commonly used in aqueous media, which aligns well with green chemistry. Where organic solvents are necessary, consider safer choices and minimal volumes.

  • Strategies (literature/general):

    • Favor water or buffered saline (phosphate, HEPES) for thiol–maleimide conjugations and EDC/NHS couplings.
    • If co-solvent is required for solubility, use small fractions of ethanol or isopropanol before resorting to DMSO/DMF.
    • Employ room-temperature conditions and catalytic amounts of bases to reduce energy and reagent load.
  • Comparison (general properties):

    Solvent | Merits | Trade-offs -|-|- Water/HEPES | Green, nonflammable, biocompatible | Requires degassing; thiol oxidation risk Ethanol | Renewable, lower toxicity | Limited solubility for high-MW PEGs DMSO | High solvency, miscible with water | Not benign to all cells/enzymes; disposal considerations DMF/NMP | Strong solvency for synthesis | Reprotoxic concerns; stricter handling

  • Additional green tips:

    • Use micro-scale, high-concentration stocks to minimize solvent waste.
    • Degas with nitrogen/argon instead of chemical oxygen scavengers when possible.
    • Replace chromium-based workups with aqueous size-exclusion or ultrafiltration for bioconjugates.
Pharmaceutical Uses
  • Item-specific: No pharmacopeial status or GMP grade is specified for this item; refer to CoA/Spec Sheet. For research use only.

  • Literature/general (non-clinical) context:

    • PEG linkers like HS-PEG-NH2 are widely used in process development and preclinical research to construct conjugates (e.g., protein–polymer, nanoparticle–ligand) where hydrophilicity and spacing are desired.
    • The amine terminus facilitates further functionalization (e.g., conversion to NHS esters, isothiocyanates) to make downstream-ready intermediates for formulation studies.
    • As an excipient-like spacer in dosage-form research, PEG linkers can modulate viscosity, reduce aggregation in protein formulations, and aid in surface passivation of primary packaging (research context only).
    • For device and diagnostic development, HS-PEG-NH2 supports surface PEGylation (e.g., microfluidic channels, sensor chips) improving antifouling properties.
  • Regulatory notes (general):

    • Transitioning to clinical manufacturing typically requires GMP-grade materials with documented residuals, endotoxin/bioburden, and trace-metal limits. Such attributes are not specified for this catalog item.
Physical Properties
  • Item-specific (from Product Data):

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
    • Other specifications (bp, mp, density, refractive index, UV cutoff): Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/general characteristics for HS-PEG-NH2 (depend strongly on PEG chain length):

    • Physical state: Typically white/off-white solid or viscous syrup for lower MWs; higher MWs form waxy solids.
    • Solubility: Highly soluble in water and polar organics (DMSO, DMF); decreasing solubility in nonpolar solvents as MW increases.
    • pKa (approximate, literature): thiol (–SH) pKa ~8–10; primary amine conjugate acid pKa ~9–10. Protonation state will be buffer- and ionic-strength dependent.
    • LogP: PEGylation imparts strong hydrophilicity; effective logP decreases with chain length; exact value MW-dependent.
    • Viscosity: Solutions can be viscous at high concentration, particularly for higher MW grades.
    • Hygroscopicity: PEGs can absorb moisture; drying prior to moisture-sensitive coupling is recommended.
  • Practical notes (general):

    • Degas aqueous buffers (argon/helium sparge) to limit thiol oxidation to disulfide.
    • Include 0.1–1 mM EDTA in buffers to sequester trace metals that catalyze oxidation.
Quality and Grades
  • Item-specific:

    • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
    • Stabilizers/antioxidants: Not specified for this item; refer to CoA/Spec Sheet.
  • Interpreting grades for PEG linkers (general guidance):

    • Research grade: Suitable for routine synthesis/bioconjugation; may have broader polydispersity and residual solvents within typical lab-use limits.
    • Bioconjugation/biochemical grade: Low endotoxin/bioburden, tighter control of reactive end-group content and low UV-absorbing impurities.
    • HPLC/UV grade claims (when present): Indicate low background absorbance and minimal chromophoric impurities beneficial for analytical workflows.
    • MW specification: PEG materials are often specified by nominal average molecular weight (e.g., 1 kDa, 2 kDa). Verify end-group functionality (≥90–95% typical for high-quality materials; check CoA) and polydispersity index (Đ) if reported.
  • What to verify on receipt (best practices):

    • End-group integrity: NMR (1H, 13C) end-group integration; Ellman’s reagent for thiol quantitation; TNBS assay for primary amine content (literature methods).
    • Residual solvent/water: Karl Fischer for water; GC for residual solvents, if critical.
    • Bioburden/endotoxin: Only relevant for sensitive bioapplications; not specified for this item.
Reaction and Applications
  • Crosslinking/conjugation (literature/general):

    • Heterobifunctional design enables sequential/orthogonal coupling: thiol end to maleimide/haloacetyl or metallic surfaces; amine end to NHS esters, activated carboxylic acids (EDC/NHS), isocyanates (urea), or epoxides.
    • Spacer role: PEG backbone imparts hydrophilicity, reduces steric hindrance, and increases water compatibility, improving biomolecule accessibility compared to short alkyl linkers.
  • Typical uses:

    • Bioconjugation: Linking proteins, peptides, oligonucleotides, dyes, and nanoparticles. Example: Maleimide-activated antibody + HS-PEG-NH2 → amine remains free for further derivatization.
    • Surface chemistry: Gold nanoparticle or planar gold functionalization via Au–S bond, exposing terminal amine for subsequent immobilization chemistries.
    • Materials: Polymer/liposome decoration to tune zeta potential and colloidal stability.
  • Practical considerations:

    • Maintain the thiol in reduced state. If disulfides form upon storage, reduce with TCEP or DTT immediately before use; remove excess reductant (spin desalting) to avoid scavenging maleimides.
    • Control sequence: For orthogonal selectivity, first couple the less stable end (thiol) to maleimide at pH ~6.8–7.0, then perform amine couplings at slightly basic pH.
    • Monitor reactions by SEC-HPLC for bioconjugates or MALDI/ESI-MS for small-molecule constructs (depending on MW).
  • Item-specific application text: Manufacturer Applications not provided; the above reflects common uses for HS-PEG-NH2.

Reaction Conditions
  • General conditions (literature; adjust to substrate and MW):

    • Thiol–maleimide coupling: 10–1000 µM HS-PEG-NH2 in degassed PBS/HEPES, pH 6.8–7.0, 20–25°C, 0.5–2 h. Molar ratio 1.1–1.5 eq vs maleimide. Optional 0.1–1 mM EDTA. Quench residual maleimide with cysteine or 2-mercaptoethanol if required.
    • Amide coupling (NHS ester + PEG–NH2): pH 7.5–8.5 in phosphate/borate, 20–25°C, 0.5–2 h. Use 1.1–2.0 eq of HS-PEG-NH2. Avoid competing amine buffers (Tris).
    • EDC/NHS activation of carboxyl partner then coupling to PEG–NH2: MES buffer pH 5.0–6.0 for activation; then adjust to pH 7.5–8.0 for coupling.
    • Reductive amination (amine end): Aqueous/MeOH or aqueous/DMSO, pH 6–7, NaBH3CN (10–50 mM), 20–25°C, 2–16 h.
  • Workup/purification (general):

    • Small molecules: Precipitation into cold ether/acetone or dialysis (for higher MW). SEC or ultrafiltration (3–30 kDa MWCO) for bioconjugates.
    • Analytical: Ellman’s assay to verify residual thiol; TNBS assay for free amine; SEC-HPLC or LC-MS where applicable.
  • Notes:

    • Oxygen control is critical to maintain thiols in reduced state. If reduction is required, use TCEP (molar excess 1.1–1.5×), then remove by desalting before maleimide coupling.
    • Kinetics: Maleimide–thiol reactions are typically second-order with high rate constants at neutral pH; raising pH accelerates but increases hydrolysis of maleimide and thiol oxidation.
Safety and Handling
  • Item-specific hazard data:

    • Signal word / H-statements / GHS classification / Pictograms: Not specified for this item; refer to SDS.
  • General safety guidance for thiol- and amine-terminated PEGs (literature/general):

    • Hazards: Thiols can oxidize to disulfides and may have a characteristic sulfur odor at high concentration. Primary amines are basic and can be irritants. PEG backbones are generally of low acute toxicity but follow good industrial hygiene.
    • PPE: Use lab coat, nitrile gloves, and safety glasses or face shield. Handle powders in a fume hood to avoid dust/aerosol exposure.
    • Incompatibilities: Strong oxidizers (thiol oxidation), acid chlorides/anhydrides (uncontrolled acylation), isocyanates/epoxides (uncontrolled reaction with amine). Avoid copper and other transition metals that catalyze thiol oxidation.
    • First aid (overview; defer to SDS):
      • Inhalation: Move to fresh air; seek medical attention if symptoms persist.
      • Skin/eye contact: Rinse with water for at least 15 minutes; remove contaminated clothing; seek medical advice if irritation occurs.
      • Ingestion: Rinse mouth; do not induce vomiting; obtain medical attention.
    • Fire safety: Combustible organic polymer; use CO2, dry chemical, or foam. Thermal decomposition may produce CO, CO2, sulfur/nitrogen oxides depending on end groups.
    • Environmental: Prevent release to drains; collect residues appropriately.
  • Storage risk controls (see also Storage tab): Maintain under inert gas, dry, and protected from light to minimize thiol oxidation and amine degradation.

Solvent Selection
  • Polarity and miscibility (literature/general):

    • PEG chains are highly hydrophilic; HS-PEG-NH2 is typically soluble in water, saline buffers (pH-dependent), and polar aprotic solvents (DMSO, DMF, NMP). Solubility in alcohols (MeOH, EtOH) is generally good; limited in nonpolar solvents.
  • Choosing solvents by application:

    • Bioconjugation to maleimide targets (thiol end): Use degassed aqueous buffers at pH 6.5–7.2 (e.g., PBS, phosphate, HEPES). A small fraction of DMSO (≤10%) can aid dissolution without suppressing reactivity.
    • Coupling via the amine end (to NHS esters/activated acids): Buffers pH 7.5–8.5 (borate, phosphate, bicarbonate) or anhydrous DMF/DMSO with organic bases for purely chemical couplings.
    • Surface modification (Au, Ag): Alcohols or water/ethanol mixtures can assist self-assembled monolayer formation via –SH/Au.
  • Comparison (general):

    • Water/HEPES: Green, biocompatible; must be oxygen-depleted for thiol stability.
    • DMSO: Excellent solvent power; miscible with water; may require dilution to limit effects on biomolecules.
    • DMF/NMP: Strong solvents for chemical synthesis; ensure low water content; handle with appropriate PPE.
  • Practical tips:

    • Pre-dry organic solvents and degas aqueous media. Add 0.1–1 mM EDTA to chelate trace metals. Prepare concentrated stocks (10–100 mM) in anhydrous DMSO and dilute into buffer immediately before use.
Storage and Reconstitution
  • Item-specific storage (from Product Data):

    • Store at −20°C, protected from light, under argon (argon charged). Shipped in an ice chest with ice pads. For research use only.
  • General handling guidance for HS-PEG-NH2:

    • Upon receipt: Allow container to equilibrate to room temperature under inert atmosphere before opening to minimize moisture condensation.
    • Aliquoting: Divide into single-use portions under dry inert gas (glovebox or Schlenk techniques) to avoid repeated freeze–thaw and headspace oxygen.
    • Protection: Keep desiccated; include oxygen/moisture scavengers only if compatible with downstream use. Avoid prolonged exposure to air to prevent thiol oxidation to disulfide.
  • Reconstitution (literature/general):

    • Prepare concentrated stocks (10–100 mM) in anhydrous DMSO or DMF for chemical synthesis, or in degassed water/HEPES/PBS for immediate bioconjugation use.
    • If discoloration or decreased thiol content is suspected, reduce briefly with minimal TCEP (1.1–1.5 eq), then remove excess reductant prior to maleimide reactions.
  • Stability notes:

    • Shelf life and exact stability are not specified for this item; refer to CoA/Spec Sheet.
    • Avoid repeated freeze–thaw cycles. Store tightly sealed with minimal headspace under inert gas. Use freshly prepared aqueous solutions.
Structure and Identity

Brief description: Thiol PEG Amine (HS-PEG-NH2) is a heterobifunctional polyethylene glycol (PEG) linker bearing a terminal thiol (–SH) and a terminal primary amine (–NH2), enabling orthogonal conjugation.

  • Item-specific (from Product Data):

    • Product name: Thiol PEG Amine, HS-PEG-NH2 (SKU T164364)
    • CAS: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES / InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • Structural features (general chemistry/literature):

    • Backbone: Linear poly(ethylene oxide) chain [–CH2–CH2–O–]n.
    • Termini: One end capped with a thiol (–SH) for chemoselective reaction with maleimides, haloacetyls, or Au surfaces; the other end is a primary amine suitable for acylation (NHS esters, activated carboxyls), or urea/thiourea formation.
    • 2D structure (verbal): A flexible ether chain containing repeating –CH2–CH2–O– units, with –SH at one terminus and –NH2 at the other.
    • Polydispersity: PEG linkers are typically distributed in molecular weight (Đ > 1); exact distribution depends on the specified MW grade (not provided here).
  • Stereochemistry: None (PEG backbone is achiral; no stereocenters).

Synthetic Utility
  • Functional group reactivity (literature/general):

    • Thiol end: Efficient nucleophile for Michael additions to maleimides/acrylates, SN2 to haloacetyls, and strong affinity to gold/silver surfaces.
    • Amine end: Nucleophilic substitution and acylation to form amides (with activated acids/NHS esters), ureas (with isocyanates or CDI-activated carbonates), carbamates (with activated carbonates), and imines/reductive aminations with aldehydes.
  • Retrosynthetic value:

    • Serves as a hydrophilic spacer fragment connecting two orthogonal coupling manifolds. Enables late-stage diversification while maintaining aqueous solubility.
    • Convergent assembly: Pre-functionalize one end (e.g., amide formation), purify, then deploy the thiol for final attachment.
  • Named/typical transformations:

    • EDC/NHS-mediated amide formation in aqueous buffer (pH 7.5–8.0) to install the PEG–NH2 onto carboxylate-bearing partners.
    • Thiol–maleimide conjugation at pH ~6.8–7.0 for rapid, selective thioether bonds.
    • Reductive amination of the amine with aldehydes (NaBH3CN/borohydrides) in mixed aqueous/organic systems for label installation.
  • Practical tips:

    • Sequence reactions to protect labile functionalities; consider temporary thiol protection (e.g., Acm, Trt) if multistep organic synthesis is planned, then deprotect prior to bioconjugation. Protection status for this item is not specified.
Target Specificity

Not applicable. This product is a chemical linker, not a biological targeting reagent or antibody. It does not possess an inherent biological target specificity. Any selectivity arises from the chemoselective reactivity of its functional groups:

  • Thiol end: Selective toward maleimides/haloacetyls and metal surfaces (Au, Ag) under appropriate conditions.
  • Amine end: Selective toward activated electrophiles (NHS esters, isocyanates, epoxides) and carbonyls in reductive amination.

Item-specific targeting or clone/isotype information is not provided and is not relevant for this compound.

Domande frequenti

How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
How should this product be stored?
Store at ?20 °C, protected from light, under argon. It is supplied under an argon blanket; reseal under inert gas after each use.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.