AMPD Buffer (0.2M, pH7.5) - BioReagent, Suitable for electrophoresis, 0.2M in water , CAS No.115-69-5

CAS: 115-69-5 Cat. No.: A1527909 Formula: C4H11NO2 Molecular Weight: 105.14 Beilstein Registry Number: 635708 EC Number: 204-100-7
AVAILABLE TO ORDER
GRADE & PURITY BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Suitable for electrophoresis ? Electrophoresis grade — low ionic/UV impurities for clean gel runs. Use in agarose/PAGE electrophoresis where impurities distort bands. 0.2M in water
Storage
Store at 2-8°C
Shipped In
Wet ice
Application
Electrophoresis
★
Size
Germany (EU)
USA*
Price
Qty
100ml
A1527909-100ml
Made to order · 8–12 wks
€34.62
Enter a quantity for the sizes you want to add.

Overview

AMPD has an effective buffering range of pH 7.8–9.7 at 25°C. This product, at pH 7.5, falls outside the optimal buffering range and exhibits weak buffer capacity. It is suitable for the separation of polypeptides in the molecular weight range of 1,500–100,000 Da in SDS-gradient gel electrophoresis systems, and can serve as a spacer medium in protein isotachophoresis. However, it is not recommended for use in alkaline phosphatase (ALP) activity assays.

Operating Procedure (For reference only):

1. Follow the specific experimental protocol as required.

Precautions:

1. Wear lab coats and disposable gloves during operation; ensure basic personal protection.

2. For research use only. Not intended for any other purposes.

3. Strictly adhere to laboratory safety protocols and select appropriate personal protective equipment (PPE) as needed based on risk assessment.

4. This product falls outside the effective buffering range of AMPD, with weak buffer capacity and susceptibility to pH fluctuations. It is suitable for electrophoresis applications only and must not be used in enzyme activity assays or other experiments that require a stable buffering system.

5. The buffering performance of this product is significantly affected by temperature. Maintain a constant temperature environment during experiments to minimize experimental errors.

6. The manufacturer assumes no responsibility for any accidents resulting from improper use of this product.

Specifications

Specifications & Purity
BioReagent, Suitable for electrophoresis, 0.2M in water
Stability And Storage
Store at 2-8℃ long term (12 months).
Storage
Store at 2-8°C
Shipped In
Wet ice
This product requires cold chain shipping. Ground and other economy services are not available.
Grade
BioReagent, Suitable for electrophoresis
Product Line
Biological Products
Names and Identifiers
PH
7.5
Isomeric SMILES
CC(CO)(CO)N
WGK Germany
1
RTECS
TY2975000
UN Number
3259
Molecular Weight
105.14
Beilstein
635708
Reaxys
635708
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=635708&ln=

Advanced Data

Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Chemical and Physical Properties
Boil Point151°C
Melt Point108-110°C
Safety and Hazards(GHS)
Pictogram(s)
GHS05,   GHS07
Signal
Danger
Hazard Statements

H315:Causes skin irritation

H319:Causes serious eye irritation

H335:May cause respiratory irritation

H412:Harmful to aquatic life with long lasting effects

H318:Causes serious eye damage

Precautionary Statements

P261:Avoid breathing dust/fume/gas/mist/vapors/spray.

P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

P273:Avoid release to the environment.

P280:Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352:IF ON SKIN: wash with plenty of water.

P321:Specific treatment (see ... on this label).

P405:Store locked up.

P501:Dispose of contents/container to an approved waste disposal plant.

P264:Wash hands [and …] thoroughly after handling.

P271:Use only outdoors or in a well-ventilated area.

P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P403+P233:Store in a well-ventilated place. Keep container tightly closed.

P362+P364:Take off contaminated clothing and wash it before reuse.

P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.

P305+P354+P338:IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

P317:Get emergency medical help.

P337+P317:If eye irritation persists: Get medical help.

P332+P317:If skin irritation occurs: Get medical help.

P319:Get medical help if you feel unwell.

WGK Germany
1
RTECS
TY2975000
Reaxys
635708
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=635708&ln=
Documents & Articles
Citations of This Product
Solution Calculators
Reviews

Customer Reviews

Application Protocols

No vendor-tested biological assay protocols are specified for this item. General guidance for common uses is provided below; adjust to your system and validate empirically.

  • Preparing a working buffer

    • Dilute the 0.2 M AMPD stock to the desired concentration (e.g., 20 mM) with high-purity water. Mix thoroughly and verify pH at the intended temperature.
    • Optional: Filter through a 0.22 µm membrane for sterility/clarity.
  • Electrophoresis (general)

    • Prepare running buffer by diluting to the ionic strength compatible with your gel and power supply. De-gas and equilibrate to run temperature.
    • Rinse gel apparatus with water before use to minimize ionic contamination.
  • Enzyme assays

    • Combine the diluted AMPD buffer with cofactors/salts as required. Confirm that the primary amine does not interfere with assay reagents (e.g., amine-reactive probes).
  • Storage between uses

    • Keep diluted working solutions refrigerated (2–8 °C) and use promptly. For extended storage, consider sterile filtration and aliquoting to limit contamination.

Item-specific testing (WB, IHC, IF, FC, etc.): Not applicable; no such data are provided for this buffer product.

Biological Roles

This product is a laboratory buffer and is not intended for biological activity per se. The solute (AMPD) is a small-molecule amine/diol used to maintain solution pH; it is not an endogenous metabolite of major pathways.

  • Function in biology-related workflows (general)

    • Provides pH control near neutrality to mildly basic conditions, stabilizing protein or nucleic acid structure/function during in vitro experiments.
    • Primary amine may interact with electrophiles (e.g., NHS esters), potentially competing with biomolecular labeling—assess compatibility if conducting amine-targeted conjugations.
    • Diol groups may weakly interact with borate; avoid borate-containing systems if precise complexation must be controlled.
  • Interactions and compatibility

    • Metal ions: AMPD can weakly coordinate certain metal ions via nitrogen/oxygen donors; for metalloprotein studies, verify that buffer does not perturb metal centers or use zwitterionic buffers with lower metal affinity.
    • Enzymes: Many enzymes tolerate AMPD buffering around pH 7.5–9; confirm activity profiles and ionic strength requirements for each enzyme.
  • In vivo relevance

    • No established physiological role is implied or claimed. Use is restricted to research and in vitro laboratory applications.

Note: No medical, diagnostic, or therapeutic claims are made. For research use only (per Product Data).

Buffer Applications
  • Product description (item-specific): Ready-to-use AMPD buffer, 0.2 M, pH 7.5, aqueous.

  • Typical laboratory uses (general)

    • Stock for preparing working solutions for electrophoresis, protein/nucleic acid handling, and enzyme assays in the pH 7.5 region.
    • Common working concentrations: 10–50 mM AMPD, often combined with salts (e.g., 50–150 mM NaCl) and additives (e.g., Mg2+, DTT) as needed.
  • Practical guidance

    • Dilution: To prepare 1 L of 50 mM AMPD, dilute 250 mL of this 0.2 M stock to 1.0 L with high-purity water; verify pH at working temperature and, if necessary, fine-adjust with small volumes of acid/base.
    • pH verification: Measure with a calibrated electrode suitable for low/medium ionic strength. Temperature affects apparent pH; equilibrate sample and electrode.
    • Electrophoresis: The 0.2 M stock is typically diluted to limit conductivity and Joule heating. Filter working buffers (0.22 µm) for high-resolution gels.
    • Additives: Introduce salts/detergents incrementally and re-check pH, as ionic strength and cosolvents can shift pH.
  • Compatibility notes (general)

    • Avoid mixing with borate if borate–diol complexation is undesirable.
    • For amine-reactive labeling workflows, use non-amine buffers (e.g., phosphate, HEPES) to prevent quenching by AMPD.
  • Quality

    • “Suitable for electrophoresis” suggests low background for staining/imaging; specific conductivity/UV specs are not provided here—consult CoA/Spec Sheet.
Green Alternatives

For an aqueous 0.2 M AMPD buffer, environmental considerations focus on choosing buffers with minimal toxicity, good biodegradability, and low interference with downstream processes. AMPD is a water-soluble, low-volatility amine-containing diol; disposal as aqueous laboratory waste is typical, following local rules.

Comparison of buffer options (general, literature):

  • AMPD (pKa ~8.8)

    • Pros: Effective buffering near pH 7.5–9.0; high aqueous solubility; simple composition.
    • Cons: Primary amine may react with amine-reactive reagents; can weakly complex metals; pH temperature coefficient requires verification.
  • HEPES (pKa ~7.5)

    • Pros: Zwitterionic Good’s buffer; minimal metal binding; lower temperature and ionic strength effects on biological systems; low UV absorbance.
    • Cons: More expensive; limited compatibility with certain oxidants; photolysis concerns in cell culture with light exposure.
  • MOPS (pKa ~7.2)

    • Pros: Zwitterionic; low interaction with biological systems.
    • Cons: Best below pH 7.5; less capacity at pH 7.5 compared with AMPD.
  • Tris (pKa ~8.1)

    • Pros: Widely used; inexpensive; strong buffering from pH ~7.4–9.0.
    • Cons: Significant temperature coefficient; interacts with aldehydes and anhydrides.

Practical guidance: Select AMPD when straightforward aqueous buffering at pH 7.5 is desired and amine reactivity is acceptable; choose Good’s buffers for tighter biological compatibility or metal-sensitive systems.

Pharmaceutical Uses

This product is supplied for research use only. The following information is general background on excipient roles of similar buffers and does not constitute a use claim for this item.

  • Potential excipient roles (general)

    • Buffering agent to maintain formulation pH in the neutral to mildly basic range.
    • Component in process buffers for protein purification (e.g., capture/polishing steps) where amine-containing buffers are acceptable.
  • Considerations relative to other buffers

    • The primary amine may interact with aldehyde-containing actives/excipients and with certain crosslinkers; evaluate compatibility during development.
    • Temperature-dependent pH shift should be characterized during stability studies; monitor pH under ICH storage conditions.
  • Regulatory/compendial status

    • No pharmacopeial status is stated for this item. For GMP or clinical manufacturing, source materials with appropriate compendial compliance and documentation.
  • Practical guidance for development studies

    • Screen AMPD against alternatives (HEPES, phosphate, Tris) for target stability, osmolality, and metal interactions.
    • Assess impact on analytical methods (e.g., UV background, derivatization assays sensitive to primary amines).

Item-specific note: This product is labeled for research use only and is not intended for use in diagnostic or therapeutic applications.

Physical Properties

For the supplied item (aqueous AMPD buffer, 0.2 M, pH 7.5):

  • Concentration: 0.2 M (item-specific)
  • pH: 7.5 (item-specific)
  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Density, refractive index, conductivity: Not specified for this item; refer to CoA/Spec Sheet.

Properties of the solute (AMPD) for reference (literature values; not specifications for this solution):

  • Molecular weight (free base): 105.14 g/mol
  • Physical state: crystalline solid; highly water-soluble
  • Melting point (AMPD): ~111–115 °C (literature)
  • pKa (conjugate acid of the amine): ~8.8 at 25 °C (literature); effective buffering range roughly pH 7.8–9.8
  • Partitioning: strongly hydrophilic; logP << 0 (qualitative, literature)

Aqueous behavior (general guidance):

  • Solubility: AMPD is freely soluble in water; a 0.2 M solution is well within typical solubility limits (literature)
  • Temperature coefficient: Buffer pH may shift with temperature; verify pH at the intended working temperature. Exact ΔpH/ΔT for this item is not specified; check with in-house calibration.

Note: Reported values above labeled as literature are provided for context and should not be taken as product specifications.

Quality & Grades
  • Item-specific grade: BioReagent, Suitable for electrophoresis.

    • Implications: Prepared from high-purity AMPD and water appropriate for biochemical workflows. “Suitable for electrophoresis” indicates low background conductivity/UV absorbance appropriate for gel systems and reproducible ionic strength/pH control.
    • Typical expectations: Low particulate load and low levels of interfering ions that could skew migration or staining in PAGE/agarose workflows. Exact impurity limits are not specified for this item; refer to CoA/Spec Sheet.
  • What this means in practice

    • Batch-to-batch reproducibility of pH (7.5 at stated temperature, unless otherwise noted on CoA) and concentration (0.2 M nominal).
    • Recommended when consistent migration and band sharpness are required, or when preparing derivative working buffers by dilution.
  • Stabilizers/preservatives

    • Not specified for this item; refer to CoA/Spec Sheet. If sterility or bioburden is critical, filter-sterilize upon receipt (0.22 µm) under aseptic conditions, unless the CoA states it is sterile.
  • Comparison to analytical grades (general guidance)

    • Compared with general-purpose reagents, BioReagent/electrophoresis-grade buffers typically exhibit lower trace contaminants and lower background signal in staining/imaging, but should not be used as primary standards unless certified.
  • Documentation

    • For precise specifications (conductivity, TOC, bioburden/endotoxin), consult the product CoA/Spec Sheet.
Reaction & Applications

Primary use is as a biochemical/electrophoresis buffer. Synthetic organic reaction applications are limited, but the AMPD base (as a molecule) can function in select roles. Distinguish between buffer usage and chemical reactivity:

  • Buffering and electrophoresis workflows (item-relevant)

    • Stock buffer for preparing working solutions (e.g., 10–50 mM AMPD) for electrophoresis, enzyme assays, or nucleic-acid handling in the near-neutral to mildly basic range.
    • Useful alternative to Tris in systems where primary amine reactivity with reagents (e.g., acylation, aldehydes) is manageable; always assess compatibility with amine-reactive chemistries.
  • Biochemical assay context (general)

    • AMPD maintains pH around 7.5–9.0, supporting many enzymatic activities requiring mild basic conditions. Check metal sensitivity; amine/diol motifs can weakly coordinate metals.
  • Chemical reactivity of AMPD (literature; not the intended use of this buffer product)

    • As an amino diol, AMPD can act as a Brønsted base, nucleophile (amine), or form borate/metal complexes; diols can undergo acylation/etherification; the amine can be protected/acylated.
  • Practical tips for lab use of this buffer

    • Degas if oxygen-sensitive components are added (e.g., reduced dyes); AMPD itself is not redox-active.
    • Filter (0.22 µm) before sensitive optical measurements to minimize scatter.
    • Verify conductivity when used in gel systems to control heating and resolution.
Reaction Conditions

For this item’s primary use as a buffer, “reaction conditions” are best interpreted as operational conditions for biochemical or electrophoretic workflows. Where chemical reaction data are mentioned, they are general literature notes and not directions for this product.

  • Biochemical operations (item-relevant)

    • Typical working concentration: 10–50 mM AMPD derived from this 0.2 M stock.
    • Temperature: 4–37 °C common for assays; confirm pH at working temperature due to temperature coefficient.
    • Additives: Compatible with many salts (NaCl, KCl), reducing agents (DTT, TCEP—verify amine compatibility for conjugations), and detergents (Tween-20, Triton X-100) at customary levels.
  • Electrophoresis

    • Conductivity should be monitored; excessive ionic strength causes Joule heating. Empirically adjust buffer dilution for gel size/voltage.
    • Filter and de-gas to minimize bubbles and streaks.
  • Chemical reactivity context (literature, AMPD as reagent)

    • As a nucleophilic, basic additive, AMPD can participate in acylations or reductive aminations in polar solvents; aqueous media will limit such reactions. No specific kinetic/yield data are provided here.
  • Cautions

    • Avoid strong acids/oxidants; check for compatibility with amine-reactive reagents.
    • Metal-catalyzed processes may be inhibited by amine/diol coordination.

Note: No specific reaction times, catalysts, or yields are claimed for this product; tailor conditions to your application and verify via small-scale trials.

Safety & Handling
  • GHS/SDS status for this specific item: Not specified for this item; refer to SDS.
  • General hazards (literature, AMPD/aqueous buffers): Low volatility; may cause mild irritation to skin, eyes, or respiratory tract upon contact or aerosol exposure. Avoid ingestion and prolonged contact.
  • Personal protective equipment (typical laboratory practice):
    • Wear lab coat, safety glasses or goggles, and appropriate chemical-resistant gloves (e.g., nitrile).
    • Use in a well-ventilated area; avoid creating aerosols or mists.
  • Handling guidance:
    • Check pH before use; avoid mixing with strong acids or oxidizers.
    • For electrophoresis or biochemical workflows, use clean plasticware or glassware to prevent contamination of the buffer.
  • Incompatibilities (general): Strong acids (neutralization/heat evolution), strong oxidizing agents; may complex weakly with some metals—use plasticware for trace-metal–sensitive applications if needed.
  • First aid (overview; defer to SDS):
    • Skin/eye contact: Rinse with water for at least 15 minutes; remove contaminated clothing; seek medical advice if irritation persists.
    • Inhalation: Move to fresh air; seek medical attention if symptoms occur.
    • Ingestion: Rinse mouth; do not induce vomiting; seek medical advice.
  • Spill & disposal:
    • Small spills: Wipe up with absorbent; rinse area with water.
    • Disposal: Follow institutional and local regulations for aqueous buffer waste; avoid release to the environment.
  • Peroxide formation: Not applicable (no ether functionality).
Solvent Selection

This product is an aqueous buffer solution; solvent selection is generally not applicable beyond water compatibility. Key points for users preparing mixtures:

  • Polarity & miscibility

    • Water-based; fully miscible with water and typical aqueous media.
    • Compatible with many polar co-solvents (e.g., ≤10–20% v/v methanol or acetonitrile) used in some electrophoresis or chromatography workflows; verify pH post-mixing as organic content can shift apparent pH and buffer capacity.
  • Ionic strength considerations

    • 0.2 M AMPD contributes significant ionic strength. For applications sensitive to conductivity (e.g., native PAGE, electrotransfer), consider diluting to 10–50 mM working concentrations.
  • Comparison with alternative buffers (general)

    • AMPD (pKa ~8.8) overlaps with Tris (pKa ~8.1) and HEPES (pKa ~7.5). Choose AMPD when reduced amine reactivity or specific enzyme compatibility is desired; prefer zwitterionic Good’s buffers (e.g., HEPES, MOPS) when reduced metal-binding and minimal temperature coefficient are priorities.
  • Practical tips

    • Adjust pH at the intended working temperature using a calibrated pH electrode designed for low ionic strength if diluting.
    • When mixing with salts or detergents, add components incrementally and verify pH after each addition.
Storage & Reconstitution
  • Item-specific storage

    • Store at 2–8 °C (from Product Data).
    • Shipped on wet ice (from Product Data).
    • Do not freeze unless validated; freezing may cause pH drift or precipitation due to gas solubility and concentration effects.
  • Reconstitution

    • Not required; this is a ready-to-use 0.2 M, pH 7.5 aqueous buffer. If concentration adjustments are needed, dilute with high-purity water and re-verify pH at the intended temperature.
  • Handling

    • Upon receipt, allow to equilibrate to 2–8 °C; mix gently before use to ensure homogeneity.
    • If any crystallization or phase separation is observed (unlikely for 0.2 M AMPD), warm to room temperature and invert to dissolve; confirm pH.
  • Shelf life/quality control

    • Specific shelf-life, sterility, TOC, endotoxin, and conductivity limits: Not specified for this item; refer to CoA/Spec Sheet.
    • For sterile applications, aseptically filter (0.22 µm) into sterile containers and aliquot to minimize freeze–thaw or repeated opening.
  • Container/materials compatibility

    • Compatible with borosilicate glass and most laboratory plastics (PP, HDPE). For trace-metal–sensitive work, prefer plasticware and pre-rinsed containers.
  • Research use note

    • For research use only (from Product Data).
Structure & Identity

This product is an aqueous AMPD buffer prepared at 0.2 M, pH 7.5 (research use). The solute is 2-amino-2-methyl-1,3-propanediol (AMPD), provided here as a defined buffer solution.

  • Item-specific facts (from Product Data)

    • Composition: AMPD buffer, 0.2 M, pH 7.5 (aqueous)
    • CAS (AMPD): 115-69-5; CID: 1531
    • Grade: BioReagent, Suitable for electrophoresis
  • Structure of solute (literature; describes AMPD, not the aqueous solution)

    • Common name: 2-amino-2-methyl-1,3-propanediol (AMPD)
    • Molecular formula: C4H11NO2 (literature)
    • Molecular weight: 105.14 g/mol (literature; note: the catalog listing does not specify MW for the solution)
    • SMILES: CC(N)(CO)CO (literature)
    • InChIKey: MZJFKQIOFWSVBK-UHFFFAOYSA-N (literature)
    • Functional groups: one primary amine (–NH2), two primary alcohols (–CH2OH), one tert-alkyl quaternary carbon bearing –NH2, –CH3, and two –CH2OH substituents
    • 2D description: a central tertiary carbon attached to a methyl group, a primary amino group, and two hydroxymethyl arms; no rings; achiral as drawn
  • Notes

    • The product is an aqueous buffer; structural identifiers above refer to the buffering base (AMPD).
Synthetic Utility

While this product is an aqueous buffer intended for biochemical workflows, the underlying solute (AMPD) is an amino diol with useful chemical reactivity (literature context only):

  • Functional group handles

    • Primary amine: nucleophilic; amenable to acylation (amides/carbamates), sulfonylation (sulfonamides), reductive amination, and protection (Boc, Fmoc).
    • Two primary alcohols: can be esterified/etherified; enable cyclic acetal/ketal formation with carbonyls under appropriate conditions.
  • Ligand/templating behavior

    • Multidentate donor (N,O,O) can chelate boron or certain transition metals; employed in niche coordination or catalysis studies (literature).
  • As a base/organocatalyst (limited)

    • The amine can serve as a Brønsted base or nucleophilic catalyst in select condensations; however, sterics/electronics differ from typical tertiary amine bases.
  • Retrosynthetic perspective

    • AMPD offers a compact scaffold for installing protected diol motifs adjacent to an amino center; useful in building polyol frameworks after differential protection.

Caveat: None of the above is the intended application for this item as sold. If using AMPD for synthesis, source the neat solid with appropriate grade; the present product is a 0.2 M aqueous solution designed for buffering.

Target Specificity

Not applicable. This product is a chemical buffer solution and is not an antibody, enzyme, or oligonucleotide. No target, epitope, clone, species reactivity, or isotype applies.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.