Bio-based content 45% for sensitive chromatographic and analytical workflows requiring minimal baseline interference.
Room temperature Ships Check lot-specific COA for exact specifications.
SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.
Cited in 0 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.
Typical applications
The material can be used as a modified substation or injection molding raw material.
Guidelines for molding
1.The packaging of this product is moisture-proof packaging, the moisture content is constant before unopacking, it is recommended to use as soon as possible after opening. Before using the opened product, it is recommended that it be dehumidification and drying as necessary to ensure the quality of the injection molding products and the stability of the injection molding process. Drying temperature should not be too high, the maximum should not exceed 110℃ and the time should not be too long, the maximum should not exceed 5 hours.
2.Injection molding temperature should not be too high, it is recommended to 270℃-295℃. Too high temperature easily makes bio-based polyamide resin crack at high temperature, product performance is reduced.
3.In the injection molding production process, the mold temperature to 600℃-900℃ is appropriate, it is recommended that the mold temperature remain at the upper limit of the temperature range, too low mold temperature will lead to bio-based polyamide resin flow worse, product surface finish poor skin difference, surface defects, product shrinkage or brittleness lead to quality decline and so on.
Comprehensive hazard, handling, storage, and regulatory compliance document.
Download SDS →Lot-specific quality data. Enter your lot number to retrieve the exact COA.
Look up COA →Full quality attributes and acceptance criteria for this grade.
View spec sheet →Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Date | Item |
|---|---|---|---|
 K2101062 | Certificate of Analysis | Aug 11, 2025 | B283710 |
| Melt Point(°C) | 260-290℃ |
|---|
