DDa-1 is a potent BTK degrader (DC 50 : 90 nM). Blue: DCAF1 binder , Black: linker, Pink: BTK ligand.
Specifications
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
This product requires cold chain shipping. Ground and other economy services are not available.
Action Type
DEGRADER
Names and Identifiers
Molecular Weight
1131.31
Advanced Data
Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
Item-specific validated applications: Not specified for this item.
General protocols for small-molecule screening (general guidance):
Stock preparation: dissolve material in anhydrous DMSO to 10–50 mM. Vortex, sonicate, and warm gently (≤40–45°C) if needed. Filter through 0.22 μm PTFE if particulate persists and solution is stable.
Aliquoting: dispense single-use aliquots (10–100 μL) into low-bind tubes or 96/384-well plates. Seal to minimize evaporative loss and DMSO uptake of moisture.
Serial dilution: perform in DMSO (e.g., 3-fold or 10-fold series), then transfer to assay buffer to achieve desired final concentration range, keeping vehicle constant across wells.
Controls: include vehicle-only, positive control (if known for the assay), and orthogonal counterscreens to flag fluorescence/absorbance interference, redox cycling, or aggregation.
Data integrity: record lot number, exact stock concentration, preparation date, freeze–thaw count, and storage conditions. Replace stocks after exceeding validated stability window.
Analytical verification:
Confirm identity/purity by LC–MS before first use and after extended storage. Check UV–Vis for concentration verification when a reliable extinction coefficient is available (not provided for this item).
Biological Roles
Item-specific biological function: Not specified for this item; no biological role is assigned in the Product Data.
General context for library compounds (general knowledge):
Compounds in discovery libraries are not assumed to have endogenous biological roles. Any observed activity arises from experimental screening and is context-dependent (assay, target class, concentration, exposure time).
Prior to biological testing, confirm identity and purity, verify absence of interfering impurities (e.g., reactive contaminants, aggregates), and assess solubility/colloidal behavior to avoid assay artifacts.
Incorporate counterscreens and orthogonal readouts to discriminate true target engagement from pan-assay interference or redox/photoactive behavior.
Note:
This product is for research use only and is not intended for diagnostic, therapeutic, or clinical applications.
Buffer Applications
Item-specific buffer information: Not specified for this item; refer to CoA/Spec Sheet.
Applicability (general guidance):
As a small-molecule library member with unknown ionization profile, DDa-1 is not a buffering reagent. However, buffer selection is often critical for biological assays using small molecules.
Practical tips for assay buffers (general knowledge):
Use a physiologically relevant buffer (e.g., PBS, HEPES, Tris) matched to target pH and ionic strength. Filter-sterilize and degas if needed.
When diluting DMSO stocks into buffer, add compound slowly with vigorous mixing to avoid local supersaturation; maintain final DMSO ≤0.1–1.0% v/v as compatible with the assay.
Include carrier proteins (e.g., 0.1–0.5% BSA) or mild non-ionic detergents (e.g., 0.01–0.05% Tween-20) only if validated for the assay to mitigate nonspecific binding/aggregation.
Record pH before and after addition of concentrated stocks; some compounds can shift pH locally.
Not applicable items:
No defined pKa or buffering capacity can be provided without structural data.
Green Alternatives
Item-specific environmental profile: Not specified for this item; refer to SDS/CoA.
Greener choices for common operations involving small molecules (general guidance):
Stock solution solvent: if DMSO is not required, consider ethanol or water/ethanol mixtures where solubility and assay compatibility allow, noting their improved EHS profiles.
Work-up/extraction: replace dichloromethane with ethyl acetate or 2-MeTHF when feasible; consider aqueous-organic biphasic systems with greener solvents.
Chromatography: use ethanol or isopropanol as partial MeOH/ACN replacements in preparative separations when resolution permits.
Example comparison (general knowledge):
DMSO vs Ethanol for stock prep
Safety/EHS: Ethanol is less hazardous and more biodegradable.
Performance: DMSO offers broader solubility; ethanol may precipitate highly lipophilic compounds at low temperatures.
DCM vs EtOAc for extraction
Safety/EHS: EtOAc has lower toxicity and better environmental profile.
Performance: EtOAc may give lower partitioning for very nonpolar compounds; adjust pH/ionic strength to compensate.
Operational tips:
Minimize solvent volumes, employ microscale assays, and use sealed plates/vials to limit VOC emissions.
Document solvent choices for reproducibility and to facilitate greener substitutions during scale-up.
Pharmaceutical Uses
Item-specific status: Not specified for this item; no pharmacopeial status or excipient role is provided.
General note (non-clinical):
DDa-1 is supplied for research use only and is not approved for human or veterinary use. No claims are made regarding suitability as an API or excipient.
Development workflows (general knowledge):
If used in pre-formulation research as a tool compound, typical studies include solubility profiling, stability (pH/oxidative/photolytic), and permeability assessments. Any such work should be strictly non-clinical and for exploratory purposes.
Excipient compatibility, residual solvent limits, and impurity profiles would require complete structural disclosure and validated analytical methods; none are available in the current Product Data.
Physical Properties
Item-specific facts (from Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Thermophysical data (literature/computed):
Boiling point, melting point, density, refractive index, logP, pKa, and solubility: Not specified for this item; refer to CoA/Spec Sheet. No literature values can be provided without a disclosed structure.
Practical implications (general guidance for small molecules):
If solid: expect reconstitution in DMSO or DMF; confirm solubility empirically at small scale (e.g., 1–10 mg in 0.5–1 mL with sonication and gentle heat ≤40–45°C).
If oil/liquid: determine miscibility in common solvents (DMSO, MeOH, ACN, EtOH) and record density if gravimetric dosing is planned.
Hygroscopicity/photolability are unknown. Handle under low humidity and subdued light until specifications are reviewed.
For analytical characterization, LC–MS in ESI+/ESI− with a generic C18 gradient (5–95% ACN/H2O + 0.1% formic acid over 10–15 min) often affords quick confirmation of purity and retention; adjust once UV/ionization properties are known.
Quality & Grades
Item-specific information (from Product Data):
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Guidance on grades (general knowledge):
Discovery/screening compounds are commonly supplied at a defined purity threshold (e.g., ≥95% by LC–UV or LC–MS). The exact threshold, analytical method (single-wavelength UV vs. CAD/ELSD), and reporting basis (area% vs. weight%) must be verified on the provided CoA.
If a stabilizer, counterion, or solvate/hydrate form is used, it will be disclosed on the CoA; absence of such a note should not be assumed as absence—confirm prior to use in quantitative assays.
Recommended incoming QC for critical applications: verify identity by LC–MS, assess purity by HPLC at multiple wavelengths (210/254/280 nm), and check water/volatile content by KF/TGA where relevant. Record lot number for traceability.
UV cutoff/trace metals/peroxide content:
Not specified for this item; refer to CoA/Spec Sheet. Do not assume suitability for photometric methods without confirming background absorbance.
Manufacturer Applications: Not specified for this item; refer to CoA/Spec Sheet.
Research use context (general for small-molecule libraries):
DDa-1 is categorized under “small molecule and compound libraries,” indicating intended use in screening, SAR exploration, and as a reference material in discovery workflows. Without a disclosed structure, no target- or reaction-specific applications can be assigned.
Practical guidance (general):
Screening: prepare well-characterized DMSO stocks with documented concentration (UV/gravimetry) and assess stability over study timelines (freeze–thaw and bench-top stability).
Orthogonal analytics: employ LC–MS, NMR, and, where applicable, HRMS to monitor identity/purity during campaigns.
If used as a tool compound, document lot-to-lot consistency and control for vehicle effects.
Synthetic chemistry note:
In the absence of structural information, DDa-1 should not be assumed to be a precursor or reagent for a particular transformation. If synthetic modification is intended, obtain full structural data and any IP/usage restrictions from the CoA or supplier documentation before planning reactions.
Reaction Conditions
Item-specific conditions: Not applicable—no structure or functional class is provided in the Product Data. No recommended reaction conditions can be stated for this item.
General laboratory considerations for handling unknown small molecules (general guidance):
Stability screens: test small aliquots under acid/base, oxidative, thermal, and photolytic conditions to map stability domains before any attempted chemical manipulation.
Analytical setup: adopt a generic LC–MS gradient (water/ACN + 0.1% formic acid) and room-temperature sampling to avoid unintended reactions.
Avoid strong reagents (e.g., conc. mineral acids/bases, strong oxidants/reductants) until compatibility is known.
Expected yields/timelines:
Not applicable for this item without defined chemistry.
Safety & Handling
Item-specific hazard information (from Product Data):
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
GHS Classification/Pictograms: Not specified for this item; refer to SDS.
General laboratory precautions (general guidance):
Use in a fume hood with appropriate PPE: lab coat, safety glasses, and chemical-resistant gloves (e.g., nitrile). Avoid inhalation of dust/aerosols and skin/eye contact.
Unknown toxicity: treat as harmful until proven otherwise. Avoid ingestion and environmental release. Decontaminate surfaces after handling.
Storage incompatibilities are unknown; segregate from strong oxidizers, strong acids/bases, and reducing agents by default. Use secondary containment.
Spill response: absorb small spills with inert material (vermiculite), collect for disposal as hazardous waste. For solids, avoid raising dust; for liquids, dike to prevent spread.
First aid overview: in case of skin/eye contact, rinse with water for at least 15 minutes; if inhaled, move to fresh air; if ingested, do not induce vomiting—seek medical attention. Always follow the SDS when available.
Waste disposal: dispose of via licensed chemical waste contractor in accordance with local regulations.
Notes:
This product is for research use only. Always consult the product-specific SDS for authoritative safety data as soon as it is available.
Solvent Selection
Item-specific solubility data: Not specified for this item; refer to CoA/Spec Sheet.
Practical starting strategy for unknown small molecules (general guidance):
Begin with a 10–50 mM DMSO stock (typical for screening). If solubility is poor, warm gently (≤40–45°C) and sonicate; avoid prolonged heating.
For aqueous assays, dilute DMSO stocks into buffered media slowly with vigorous mixing to final DMSO ≤0.1–1.0% v/v, as permitted by the assay.
If crystallization occurs upon dilution, add a co-solvent (MeOH or ACN, 5–20% v/v) or include non-ionic surfactants at low levels if compatible with the assay.
Chromatography considerations (general):
Reverse-phase HPLC/UPLC with C18 columns is broadly compatible. Start with water/ACN or water/MeOH containing 0.1% formic acid (or 5–10 mM ammonium formate for MS compatibility).
Comparison of common solvents (general knowledge):
DMSO: maximal solvating power; high boiling point; may affect some biological assays at >0.5–1% v/v.
MeOH/EtOH: protic, lower toxicity; limited for very lipophilic analytes.
ACN: aprotic, low viscosity; strong eluent in RP-HPLC; handle with care due to toxicity.
2-MeTHF/CPME: greener options for synthesis, less typical for stock solutions but useful for extractions.
Storage & Reconstitution
Item-specific storage (from Product Data):
Storage Conditions: Store at -20°C.
Shipped In: Ice chest + ice pads.
General handling guidance (applicable to small molecules):
Upon receipt: allow the sealed container to equilibrate to room temperature before opening to minimize condensation. Inspect for physical changes.
Aliquoting: prepare single-use aliquots to avoid repeated freeze–thaw cycles. For DMSO solutions, store in tightly sealed, moisture-impermeable vials; minimize headspace to limit water uptake.
Light/moisture: protection from light and humidity is recommended unless documentation states otherwise.
Reconstitution: solvent choice depends on solubility (not provided). Start with anhydrous DMSO; if aqueous use is required, dilute slowly into buffer with vigorous mixing. Document final vehicle composition.
Stability: no item-specific stability data are provided. Establish bench-top and frozen stability empirically (e.g., LC–MS at t0, 24 h, 1 week). Replace solutions that show precipitation, discoloration, or degradation.
Specifications not provided for this item; refer to CoA/Spec Sheet:
Exact solubility and concentration limits
Extinction coefficient for UV-based quantitation
Photostability and hygroscopicity
Recommended shelf life at -20°C
Research Use Note: For research use only.
Structure & Identity
Item-specific facts (from Product Data):
SKU: D1448698
Product Name: DDa-1
CAS: 3036944-98-3
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Structural description:
The structural features (ring systems, functional groups, stereochemistry) cannot be summarized because no structure (SMILES/InChI) is provided in the Product Data. Refer to the product CoA/Spec Sheet for definitive identity information.
General notes for small-molecule library members (general knowledge):
Library compounds like DDa-1 are typically discrete organic molecules intended for screening and discovery workflows. Without an exact structure, treat this as a research chemical of unknown functional class until documentation is reviewed.
Best practice: Verify identity via CoA (including structure drawing, spectral data) and, if needed, perform independent confirmation (LC–MS, HRMS, 1H/13C NMR) before critical studies.
Synthetic Utility
Item-specific reactivity/functional group content: Not specified for this item; structure is not disclosed in the Product Data.
Applicability (general guidance):
Without structural information, DDa-1 should not be assumed to function as a reagent, catalyst, or building block. Treat as a finalized small molecule intended for screening rather than for synthetic elaboration.
If derivatization is contemplated (general knowledge):
Obtain full structural data and IP status. Plan orthogonal handles for modification only after confirming functional groups and stability.
Analytical controls: monitor reactions by LC–MS and NMR; confirm absence of decomposition if sensitive motifs (e.g., aldehydes, anilines, diazo, nitroso) are later identified.
Bottom line:
Use as a test article/reference compound unless and until the structure and reactivity profile are defined via official documentation.
Target Specificity
Item-specific data: Not specified for this item; no target, epitope, or specificity information is provided in the Product Data.
General note:
For small-molecule library members, any target specificity must be established experimentally. Use target engagement assays and orthogonal biophysical methods (e.g., SPR, DSF, CETSA, enzymology) where appropriate.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.