I. 30T Organic Montmorillonite , CAS No.O766861

CAS: O766861 Cat. No.: O766861

Storage

Room temperature

Shipped In

Normal

Overview

Nanomer® nanoclays are high purity, surface compatabilized montmorillonites, suitable for use in a wide variety of plastics.  Nanomer I.30T uses octadecyl ammonium as surface treatment,  It offers high heat stability up to 280 ºC. 
Product Data

These data are for reference use only.  Certificate of Analysis will come with each commercial shipment.  
Application Guideline
Nanomer I.30T is designed for use as additive in general polymer resins, including polyamide and other polar resins.  Incorporation of Nanomer I.30T into polymers improves physical performance properties and flame resistance.  The loading level is commonly in the range of 4-6wt% for mechanical improvement, and 1-4 wt% for flame retardation.  Nanomers are very effective in flame retardation when combined with traditional flame retardants.  It is possible to reduce the traditional flame retardants to reduce toxicity, specific gravity and enhance processing capability.
I.30T can also be use in PA6 in situ polymerization to make PA6 nanocomposite.   It is suitable for both batch and continuous processes.  A pre-dispersion of I.30T in caprolactam is needed prior to the polymerization reaction. 
Processing Guideline
Nanomer I.30T can be used in direct compounding process to incorporate into polyamide, polyurethane and nitrile rubber without use of any compatibilizers.  Conventional batch and continuous processing equipment can be used.  Processing temperature should be lowered than 280ºC.  
Nanomer I.30T can be fed from volumetric or gravimetric feeders.

Montmorillonite products are divided into inorganic montmorillonite and organic montmorillonite. Among them, inorganic montmorillonite includes sodium based montmorillonite and lithium based montmorillonite, with high purity and good consistency, which can meet various modification needs; Organic montmorillonite is modified with organic treatment agents that have good temperature resistance and high purity for different applications, which can fully utilize the role of montmorillonite

PROJECT NO	Model	Scope of application
O766870	I.44P	Used for various polyolefins, EPDM, ABS, and TPU
O766861	I.30T	Epoxy resin and TPU used as amino curing agents
P766863	PGV	Inorganic montmorillonite, hydrophilic, used in water-soluble systems
P766867	PGW	Inorganic montmorillonite, hydrophilic, used in water-soluble systems
P766865	PGN	Inorganic montmorillonite, hydrophilic, used in water-soluble systems

Specifications

Legal Information

Nanomer is a registered trademark of Amcol International Corporation.

Storage

Room temperature

Shipped In

Normal