GRADE & PURITYBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
For isolation and cultivation of intestinal bacteria
Specifications
Specifications & Purity
BioReagent
Storage
Room temperature
Shipped In
Normal
Grade
BioReagent
Product Line
Biological Products
Advanced Data
Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
General microbiological protocol (literature; adjust per your SOP and method):
Plate preparation: Prepare and pour plates as described under Reaction Conditions. Dry plate surfaces in a laminar-flow hood until free moisture is absent.
Inoculation: Streak for isolation using a sterile loop, or spread a measured inoculum (e.g., 0.1 mL) for counts. For membrane filtration, place sterile membrane with captured sample onto the agar surface without trapping air.
Incubation: 35–37 °C for 18–24 h (aerobic). Some slow growers or stressed cells may require up to 48 h.
Interpretation:
Lactose fermenters: pink to red colonies; may show precipitated bile halos.
Non-lactose fermenters: colorless to pale colonies against the agar background.
Gram-positive organisms: Without crystal violet, some may grow (often small, pale colonies); confirm with Gram stain or follow-up tests.
Controls: Include positive control strains for fermentation and non-fermentation, and a Gram-positive control to verify selectivity profile of this variant.
Follow-up: Confirm presumptive identifications with biochemical panels (e.g., oxidase, IMViC), MALDI-TOF, or molecular assays.
Notes:
Dry plates adequately to prevent lactose diffusion smearing color interpretation.
Avoid overheating medium; excess heat can darken neutral red and elevate background coloration.
Biological Roles
Not a biomolecule with intrinsic metabolic function; instead, MacConkey Agar (without crystal violet) provides a defined environmental niche to differentiate microbial phenotypes (literature):
Selective pressure: Bile salts simulate the intestinal environment, suppressing many Gram-positive organisms and enriching for Gram-negative enterics. Omitting crystal violet reduces this suppression, permitting partial growth of some Gram-positives for comparative studies.
Differential indicator system: Lactose fermentation yields organic acids that reduce local pH. Neutral red accumulates in colonies under acidic conditions, producing pink/red coloration—an easily scorable phenotype linked to carbohydrate metabolism (lac operon status, permease/β-galactosidase activity).
Colony morphology cues: Bile precipitation and colony size/form may give preliminary insights into species/biotype (e.g., mucoid colonies of Klebsiella due to capsule production).
Workflow integration: Frequently used for initial isolation, followed by confirmatory biochemical or molecular identification (e.g., IMViC tests, MALDI-TOF, PCR). The medium’s design thus plays a role in triaging mixed microbial populations based on metabolic traits.
Buffer Applications
This product is not designed as a laboratory buffer solution. It is a complex culture medium whose components (e.g., peptones, salts) impart moderate buffering capacity around neutral pH to support bacterial growth.
General preparation notes (literature):
Prepared medium pH target is typically near neutrality (around pH 7.1), suitable for enteric bacteria. If pH adjustment is necessary, use sterile technique and adjust before sterilization.
For electrophoresis or biochemical assays requiring defined buffering capacity, use dedicated buffer systems (e.g., phosphate, Tris) rather than complex media.
When performing overlay or soft-agar applications, pH should match the base layer to avoid diffusion-driven shifts in indicator response.
Green Alternatives
This product is an agar-based medium and is inherently water-based, avoiding volatile organic solvents. Greener practice considerations focus on process improvements rather than alternative chemicals.
Sustainability considerations (general):
Agar source: Agar is a renewable marine polysaccharide. Selecting suppliers that implement sustainable seaweed harvesting supports environmental stewardship.
Waste minimization: Prepare only the volume needed to reduce expired plate disposal. Use refillable glass bottles for media melts and reusable plate pourers where appropriate.
Energy optimization: Batch autoclave cycles to maximize load efficiency; use validated minimum hold times to avoid excess energy use while maintaining sterility assurance.
Packaging: Choose bulk dehydrated media to reduce plastic from pre-poured plates when lab throughput and QC allow.
Comparison (general practice options):
Dehydrated media (this item) vs. ready-to-use plates:
Cons: Requires autoclave/sterile pouring infrastructure; operator time; potential for variability if preparation is not standardized.
Pharmaceutical Uses
No therapeutic applications. For research and quality control use only.
Typical roles in pharmaceutical and related industries (literature):
Microbiological quality control: Detection and differentiation of Gram-negative enteric bacteria in raw materials, in-process samples, and environmental monitoring programs where lactose fermentation status is informative.
Water and utilities testing: Enumeration of coliforms or lactose-fermenting organisms using membrane filtration onto MacConkey plates, where method-specified.
Method suitability/validation: Employed in growth promotion testing (GPT) and recovery studies to demonstrate that media and test methods support growth of indicated microorganisms and inhibit others as intended. Note that the absence of crystal violet alters selectivity; compendial methods may specify classic MacConkey with crystal violet—verify method alignment before use.
Training and proficiency: Teaching labs and proficiency testing schemes use this medium to train personnel in colony morphology recognition and differential plating techniques.
Compliance note: Always verify that the selected medium, lot, and preparation comply with the specific pharmacopeial or regulatory method (e.g., USP <61>/<62>, EP 2.6.13) applicable to your workflow.
Physical Properties
**Item-specific (Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula/weight: Not applicable (complex mixture).
Typical properties (literature; non-binding, for general reference):
Physical form (dehydrated): free-flowing, tan to reddish powder that hydrates in water; becomes a firm gel upon sterilization and cooling due to agar.
Solubility: Readily dispersible in water with heating; insoluble in organic solvents.
Prepared medium color: pale to rose-red; deepens upon acid production from lactose fermentation during incubation.
Typical preparation strength: approximately 50 g per liter of purified water (varies by manufacturer; follow label for this item).
Typical gelation: sets as a firm gel on cooling to room temperature after autoclaving; gel strength depends on agar content.
pH (at 25 °C, prepared): commonly around pH 7.1 ± 0.2 (literature; confirm on product label/CoA for this item).
Thermal behavior: agar melts on heating to near boiling and resolidifies upon cooling; do not overheat neutral red to avoid dye degradation.
Notes for users:
Use freshly prepared, well-clarified medium to avoid precipitates that may confound colony color interpretation.
Final agar depth in plates (literature): ~4 mm (~20–25 mL per 100 mm plate) supports consistent diffusion and colony morphology.
Quality & Grades
**Item-specific (Product Data):
Grade: BioReagent (suitable for biological research applications). No additional item-specific performance specifications provided; refer to CoA/Spec Sheet.
What BioReagent grade implies (general guidance):
Manufactured to support reproducible microbiology workflows, with controls on raw materials (e.g., peptone nitrogen content, agar gel strength) to minimize lot-to-lot variability.
Microbiological performance characteristics are typically validated against literature organisms (e.g., lactose-fermenting vs. non-fermenting Gram-negative bacteria) using standard inoculum levels and incubation parameters. Specific ATCC strains and acceptance criteria vary by supplier; check the CoA for this item.
Absence of crystal violet: This variant intentionally omits crystal violet, reducing inhibition of some Gram-positive bacteria (e.g., staphylococci, enterococci). Selectivity relies primarily on bile salts. This feature should be considered in method suitability and sample background flora.
Documentation and verification:
CoA/Spec Sheet normally includes pH of prepared medium, gel strength, and growth response for challenge strains. For this item, values are not specified here; consult the product documentation.
For regulated testing (food, water, pharma QC), verify that the lot meets your compendial or method-specific requirements (e.g., ISO, USP, EP, FDA-BAM) before use, as formulations and performance criteria can differ among suppliers.
Reaction & Applications
Chemical reaction applications are not relevant. Instead, this product is used as a selective and differential growth medium in microbiology.
Applications (literature; expand on typical use):
Selective isolation of Gram-negative enteric bacteria from clinical, environmental, food, and pharmaceutical samples. Selectivity is primarily via bile salts; crystal violet is omitted in this formulation, reducing suppression of many Gram-positives.
Differential detection of lactose fermentation:
Lactose fermenters (e.g., Escherichia coli, Klebsiella spp.) produce acid that turns colonies pink to red due to neutral red uptake; bile precipitation halos may appear.
Non-lactose fermenters (e.g., Salmonella, Shigella, Proteus) remain colorless to pale, often with the medium retaining its original hue.
Enumeration/qualitative workflows: streak plating for isolation, spread plating for counts, and membrane filtration for water testing following method suitability.
Method adaptation: The absence of crystal violet may be advantageous when recovering stressed Gram-negative bacteria with concomitant Gram-positive background or when assessing Enterococcus growth for differentiation studies.
Practical tips:
Standardize inoculum and incubation conditions (35–37 °C, aerobe) to ensure reproducible color development.
Dry plate surfaces before inoculation to prevent colony spreading and lactose diffusion artifacts.
Use appropriate positive/negative controls with each lot to verify selectivity and differential response.
Reaction Conditions
Chemical reaction conditions do not apply. The relevant “conditions” concern media preparation and sterilization (literature guidance; verify on product label/CoA for this item):
Typical preparation workflow:
Hydration: Suspend approximately 50 g of dehydrated medium per liter of purified water. Allow to disperse with continuous stirring.
Heating: Gently heat to boiling to fully dissolve components. Avoid scorching; intermittent swirling helps clarify the solution.
Sterilization: Autoclave at 121 °C for 15 minutes (standard gravity-displacement or pre-vac cycle) unless method dictates otherwise.
Cooling and pouring: Cool to 45–50 °C, then aseptically pour into sterile Petri dishes (about 20–25 mL per 100 mm plate). Let solidify on a level surface; dry plates before use to remove surface moisture.
Storage of prepared plates: Store inverted in sealed sleeves at 2–8 °C to limit dehydration and dye fading; equilibrate to room temperature and dry surface before inoculation.
Performance checks:
Growth promotion test with representative organisms (e.g., E. coli as fermenter; Salmonella as non-fermenter) and an appropriate Gram-positive challenge to confirm selectivity profile without crystal violet.
Record pH of the medium after sterilization and cooling; adjust process as needed if outside target range.
Safety & Handling
**Item-specific (Product Data):
GHS classification, pictograms, signal word, H-statements: Not specified for this item; refer to the SDS.
General safety considerations (literature/good laboratory practice):
Hazards: Dehydrated culture media may cause eye/skin/respiratory irritation as dust. The prepared plates or broths will contain live microorganisms after inoculation—treat as biohazard and follow institutional biosafety procedures.
PPE: Laboratory coat, safety glasses, and appropriate gloves. Use a dust mask or work in a ventilated area when weighing to minimize inhalation of powder.
Handling: Avoid creating dust. Prepare media with clean glassware. After use, autoclave or chemically disinfect cultures and spent plates before disposal per local regulations.
Incompatibilities: Avoid contact of the dry powder with strong oxidizers and strong acids/bases. During autoclaving, do not tightly seal containers; allow pressure equalization.
Thermal precautions: Autoclave at validated parameters; avoid overheating neutral red-containing media to prevent indicator degradation and background darkening.
First aid (overview; consult SDS):
Inhalation: Move to fresh air; seek medical attention if irritation persists.
Skin/eyes: Rinse with water for several minutes; remove contaminated clothing; seek medical advice if irritation continues.
Ingestion: Rinse mouth; do not induce vomiting; get medical attention if unwell.
Reference: Always consult the product-specific SDS for authoritative safety guidance.
Solvent Selection
Not typically applicable—MacConkey Agar is a dehydrated culture medium formulated to be dissolved in purified water and solidified by agar.
Practical notes (literature):
Use high-quality water (e.g., purified/deionized) for reconstitution to avoid precipitation or color shifts due to hardness ions.
Avoid organic solvents; components (agar, peptones) are not soluble in them and solvent residues may inhibit microbial growth.
If clarifying is needed after hydration, gentle heating with stirring is standard; do not filter through fine membranes, as agar will gel upon cooling and clog filters.
Reconstitution and preparation (literature; confirm with product label/CoA for this item):
Typical use level: Approximately 50 g per liter of purified water. Adjust quantity only per validated method or manufacturer instructions.
Dissolution: Suspend powder in water with stirring; heat to near boiling to fully dissolve. Do not autoclave longer than necessary to preserve indicator integrity.
Sterilization: Autoclave at 121 °C for ~15 minutes. Cool to 45–50 °C and pour plates aseptically.
Storage of prepared media: Store poured plates inverted in sealed sleeves at 2–8 °C; protect from light to minimize neutral red fading. Use within a typical shelf window (often 2–4 weeks), per your QC policy.
Additional notes:
Avoid repeated melt cycles; if remelting is necessary, minimize hold times at high temperature.
Check each lot with growth promotion testing before routine use.
Any item-specific specs such as prepared pH, gel strength, or performance criteria: Not specified for this item; refer to CoA/Spec Sheet.
Research Use Note: For research use only.
Structure & Identity
**Item-specific (Product Data):
Product: MacConkey Agar (without Crystal Violet)
SKU: M1528419
Grade/Purity: BioReagent
Storage: Room temperature; shipped under normal conditions
CAS, CID, InChIKey, SMILES, empirical formula, molecular weight: Not applicable to complex, multi-component media; not specified for this item; refer to CoA/Spec Sheet.
General description (literature):
Composition type: Dehydrated, complex microbiological medium comprising peptones/enzymatic digests (nitrogen/carbon source), lactose (fermentable carbohydrate), bile salts (selective agent), neutral red (pH indicator), sodium chloride (osmotic balance), and agar (gelling agent). This variant omits crystal violet, reducing selectivity against Gram-positive organisms compared to classic MacConkey.
Structural features: Not a single molecule; a heterogeneous blend of organic and inorganic constituents. The solidified medium is a hydrated polysaccharide gel matrix (agar) infused with small molecules (bile salts, dye, electrolytes) and peptides.
Functional roles of constituents:
Agar: polysaccharide gel scaffold enabling colony isolation.
Bile salts: inhibit many Gram-positive bacteria, favoring Gram-negative enterics.
Lactose + neutral red: differential system for lactose fermentation (acid → pink/red colonies and precipitated bile halo).
Synthetic Utility
Not applicable. MacConkey Agar (without crystal violet) is a biological culture medium and is not used as a reagent or catalyst in chemical synthesis.
For chemists seeking transformation reagents:
Consider this product outside the scope of organic/inorganic reaction chemistry. Refer to solvent, catalyst, or building-block categories for synthetic applications.
Target Specificity
Not applicable. This product is not an antibody or affinity reagent and has no molecular target specificity. Its selectivity is phenotypic (microbiological) via bile salts and a lactose/neutral red differential system.
Need help choosing the grade?
Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.