Vegetable Peptone - BioReagent

Cat. No.: V1528364
AVAILABLE TO ORDER
GRADE & PURITY BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Size
Germany (EU)
USA*
Price
Qty
250g
V1528364-250g
Made to order · 8–12 wks
€86.69
Enter a quantity for the sizes you want to add.

Overview

Plant peptone is a microbial raw material obtained by papain digestion of soybean meal. It is soluble in water, yielding a clear and transparent solution with no phosphate precipitation. It is rich in vitamins and contains abundant carbohydrates from plant tissue, and is used for the preparation of microbial culture media. Composition: Total nitrogen: ≥ 8.0% Amino nitrogen: ≥ 2.0% Ash: ≤ 15.0% Moisture: ≤ 7.0% Usage precautions: For laboratory use only; avoid contact with skin and eyes during use; avoid inhalation or ingestion.

Specifications

Specifications & Purity
BioReagent
Storage
Room temperature
Shipped In
Normal
Grade
BioReagent
Product Line
Biological Products

Advanced Data

Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Reviews

Customer Reviews

Application Protocols

No item-specific, validated application protocols are provided in the Product Data.

General preparation protocol (literature; not item-specific)

  • Weigh desired amount of vegetable peptone (e.g., 10 g for 1 L of 1% w/v solution).
  • Add to ~800 mL of DI water with stirring. Rinse weighing vessel to recover fines.
  • Mix until fully dissolved; adjust volume to 1 L with DI water.
  • Adjust pH to target (e.g., 7.0 for many bacteria) using sterile acid/base as needed.
  • Sterilize: autoclave at 121 °C for 15–20 min, or sterile-filter through 0.22 µm if heat-sensitive co-components are present.
  • Cool to room temperature; aseptically dispense or add supplements (carbon source, salts, vitamins) as required.

Quality check

  • Inspect for clarity/turbidity, measure pH, and, if critical, perform a growth promotion test using a reference strain.

Note: For organism-specific media recipes and validated growth promotion parameters, consult standard references or your internal SOPs.

Biological Roles

Context

  • Vegetable peptone does not represent a single biomolecule with a specific physiological role. It is a mixture that provides bioavailable nitrogen, carbon (to a lesser extent), and micronutrients to microorganisms in culture.

Functional contributions in culture (general/literature)

  • Nitrogen source: supplies amino acids and small peptides readily transported by many bacteria and fungi.
  • Growth factors: may include vitamins, minerals, and trace elements carried over from plant material, improving growth kinetics and biomass yield.
  • Buffering/carryover: limited intrinsic buffering; however, peptide side chains can modulate medium pH slightly during autoclaving and growth.
  • Metabolic impact: peptide-rich media can shorten lag phase, increase maximum specific growth rate (µmax), and influence metabolite profiles (e.g., overflow metabolism with high C availability).

Use cases in biotechnology

  • Recombinant protein expression: supports basal growth; often paired with yeast extract and defined feeds.
  • Fermentation of secondary metabolites: provides complex nutrients that can derepress or stimulate certain biosynthetic pathways in microbes.

Limitations

  • Undefined composition introduces variability; for tightly controlled studies, consider supplementing with defined amino acid mixtures or switching to chemically defined media after initial optimization with peptone.
Buffer Applications

Not typically applicable.

  • Vegetable peptone is not a buffering agent and has limited intrinsic buffering capacity. For buffered media, combine with appropriate buffer systems (e.g., phosphate, MOPS, HEPES) selected for the target pH range and organism tolerance.
  • See Solvent Selection and Reaction & Applications for practical notes on preparing peptone-containing buffered media.
Green Alternatives

Sustainability perspective (general)

  • Vegetable peptone itself is a plant-derived alternative to animal peptones (casein/meat). Selection can reduce animal-origin risk (AOF), prion/TSE concerns, and may lower environmental footprint depending on sourcing and processing.

Comparison (general; not item-specific)

  • Feedstock: plant proteins (e.g., soy/wheat) vs. animal casein/meat.
  • Processing: often enzymatic hydrolysis at moderate conditions; acid hydrolysis can increase salt load and alter amino acid profiles.
  • Downstream impact: reduced regulatory scrutiny related to animal origin in some workflows.

Example comparison table (literature/general, not item-specific)

  • Vegetable peptone: AOF, consistent supply chains; amino acid profile depends on crop and season; may be richer in certain limiting amino acids depending on process.
  • Casein peptone: rich in peptides favorable for fastidious microbes; animal-derived compliance overhead.
  • Yeast extract (not a peptone, but related complex nutrient): high vitamins and growth factors; complements vegetable peptone in many formulations.

Practical guidance

  • If adopting greener media, pilot runs are essential—organisms can exhibit different growth and product profiles. Document carbon/nitrogen ratios and adjust carbon feed to maintain comparable C/N balance when switching from animal to vegetable peptone.
Pharmaceutical Uses

Research/manufacturing context only (no therapeutic claims)

  • Vegetable peptone can be used as a raw material in upstream fermentation media to produce enzymes, biocatalysts, and other biologic or small-molecule products in research and non-therapeutic manufacturing settings. Suitability for regulated manufacturing requires qualification and may necessitate additional documentation beyond BioReagent grade.

Typical roles (general/literature; not item-specific)

  • Complex nitrogen source in seed trains for microbial production strains.
  • Component in quality control microbiology media (environmental isolates, bioburden testing), where animal-free media are specified.
  • Alternative to animal-derived peptones to address supply chain or regulatory preferences for animal-origin–free materials.

Considerations for regulated environments

  • Source documentation: plant origin, processing (enzymatic vs acid hydrolysis), allergen statements (e.g., soy/wheat), and absence of animal-derived inputs.
  • Quality attributes to monitor: bioburden/endotoxin levels, heavy metals, ash, chloride, TAN, and batch growth performance.
  • Change control: establish incoming lot qualification protocols with defined acceptance criteria for critical organisms and media formulations.
Physical Properties

Item-specific (from Product Data)

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Other specifications (water content, ash, metals): Not specified for this item; refer to CoA/Spec Sheet.

General/literature characteristics for vegetable peptones (not item-specific)

  • Physical form: typically a tan to light-brown free-flowing powder; hygroscopic tendencies vary with process.
  • Solubility (literature): readily soluble in water across a wide pH range; insoluble in most organic solvents. Solutions may be slightly opalescent depending on salt and peptide content.
  • pH of 1–2% aq. solution (literature): commonly mildly acidic to neutral; exact value is product-dependent.
  • Typical peptide size distribution (literature): mixture of free amino acids and oligopeptides; frequently enriched in <10 kDa fractions, but process-dependent.
  • Density and bulk properties (literature): true density near that of organic amorphous solids; bulk density varies widely (e.g., 0.3–0.7 g/mL) with milling and moisture. These are not specifications for this item.
  • Thermal behavior (literature): stable to autoclaving at 121 °C for typical media cycles; prolonged overheating can cause Maillard browning and reduce performance.

Practical notes

  • Filterability of solutions depends on fines/insolubles; 0.22–0.45 µm sterile filtration is commonly feasible after complete dissolution.
  • For precise values relevant to this SKU, consult the CoA/Spec Sheet.
Quality & Grades

Item-specific (from Product Data)

  • Grade: BioReagent.

What BioReagent grade generally implies (general guidance)

  • Intended for laboratory research workflows, including microbiology and biotechnology, where consistent performance and low bioburden are important. Not certified for clinical/therapeutic use.
  • Typical controls for peptones at this grade may include total nitrogen, amino nitrogen, ash, chloride, heavy metals, loss on drying, and performance growth tests in standard media (e.g., tryptic soy-based or vegetable peptone-containing broths). Actual acceptance criteria are product-specific—consult CoA.

Stabilizers/additives

  • No stabilizers are listed in the Product Data. If critical for your application (e.g., plant protein source, enzymatic vs. acid hydrolysis), verify on the CoA/Spec Sheet.

Batch-to-batch consistency

  • For complex media components, functional testing is paramount. Consider qualifying batches using your target organism(s) and growth endpoints (OD600 kinetics, CFU, metabolite titers).

Regulatory/quality context (general)

  • Many labs require traceability and change-control. Retain CoAs and lot numbers in records. This product is designated “For research use only.” If GMP or pharmacopeial compliance is required, verify suitability or source a qualified alternative.
Reaction & Applications

Scope of use (research-only)

  • Vegetable peptone functions as a complex nutrient source in microbiology and biotechnology. It is not typically used as a reagent in small-molecule synthesis; rather, it supports biological reactions (growth, expression, fermentation).

Typical applications (general/literature; not item-specific)

  • Microbial culture media: component in nutrient broth/agar, tryptic soy-like vegetable formulations, and custom complex media for bacteria and fungi.
  • Fermentation: supports high-cell-density cultivation for recombinant protein production, enzyme manufacture, and metabolite/bioproduct synthesis (e.g., organic acids, alcohols, biopolymers).
  • Selective/differential media: used alongside yeast extract/carbohydrates to modulate growth and indicator responses.
  • Seed trains and scale-up: provides a robust nitrogen and growth factor source across bioreactor scales.

Practical preparation tips

  • Concentration ranges (literature): 5–20 g/L in broths; optimize between 2–30 g/L based on organism and objective (growth vs expression).
  • pH management: adjust medium pH prior to sterilization; buffer capacity may be limited—control pH during fermentation.
  • Heat treatment: autoclave with other media components where compatible; alternatively, sterile-filter peptone into heat-labile formulations.
  • Performance qualification: compare lots by OD600 growth curves, lag phase duration, and target product titer; consider amino nitrogen (TAN) as a proxy for bioavailability.

Compatibility notes

  • Works synergistically with yeast extract and defined salts. Carbon sources (glucose/glycerol) should be optimized to prevent overflow metabolism or catabolite repression.
Reaction Conditions

Applicability note

  • For vegetable peptone, “reaction conditions” pertains to culture preparation/fermentation rather than classical organic reactions.

General culture conditions (literature; not item-specific)

  • Concentration: commonly 5–20 g/L in complex media; optimize 2–30 g/L based on organism. Combine with yeast extract (1–10 g/L) and carbon source (e.g., glucose 5–20 g/L) as appropriate.
  • Solvent: water; adjust pH to organism needs (e.g., pH 6.8–7.4 for many bacteria; fungi often prefer slightly acidic conditions).
  • Sterilization: autoclave at 121 °C for 15–20 min. For heat-labile co-components, sterile-filter peptone solution (0.22 µm) separately and aseptically combine.
  • Aeration and mixing: set kLa to support target growth rate; peptide-rich media can increase oxygen demand.
  • Temperature: organism-dependent; typical 25–37 °C for mesophiles.
  • Expected outcomes: reduced lag phase and robust growth relative to minimal media; quantify via OD600, dry cell weight, and product titer.

Troubleshooting tips

  • Precipitation/turbidity after sterilization: ensure complete dissolution before autoclaving; consider adjusting pH or filtering hot. Some salts/metal ions can cause haze—optimize ionic strength.
  • Foam formation: peptides can be foaming agents; use antifoam compatible with organism/process.
  • Batch variability: qualify lots with a standardized test panel of organisms and media.
Safety & Handling

Item-specific hazard information (from Product Data)

  • Signal word: Not specified for this item; refer to SDS.
  • H-statements: Not specified for this item; refer to SDS.
  • GHS classification/pictograms: Not specified for this item; refer to SDS.

General safety guidance for peptone powders (not item-specific; defer to SDS)

  • Likely hazards: nuisance dust; may cause mechanical irritation to eyes/respiratory tract. Plant-derived materials (e.g., soy) can pose allergen concerns to sensitized individuals. Avoid dust formation and inhalation.
  • PPE: laboratory coat, safety glasses, disposable gloves; use a dust mask/respirator if dust generation cannot be controlled (per institutional risk assessment).
  • Handling: minimize airborne dust; open containers in a fume hood or with local exhaust. Use clean, dry tools; avoid moisture ingress that can cause caking or microbial growth in opened containers.
  • Incompatibilities: strong oxidizers may degrade organic constituents. Avoid contact with strong acids/bases during storage; normal media preparation at controlled pH is acceptable.
  • First aid (overview): eye contact—rinse cautiously with water; skin contact—wash with soap and water; inhalation—move to fresh air; ingestion—rinse mouth. Seek medical attention according to SDS and institutional protocols.
  • Fire safety: organic powder; combustible. Prevent dust clouds near ignition sources. Use water spray, CO2, foam, or dry chemical for extinguishing; firefighters should wear SCBA.
  • Waste: dispose of in accordance with local regulations; autoclave biological residues from culture media before disposal.
Solvent Selection

Applicability

  • Vegetable peptone is a complex, largely polar mixture; dissolution is typically in water or aqueous buffers. Selection revolves around dissolution efficiency, clarity, sterilization approach, and downstream biological compatibility rather than organic solvent choice.

General/literature guidance (not item-specific)

  • Primary solvent: water (DI/RO). Rapid dissolution at room temperature with moderate stirring. Gentle warming (≤40–50 °C) can accelerate dissolution but avoid overheating to limit Maillard reactions.
  • Buffer compatibility: commonly used in phosphate, Tris, and MOPS buffers for specialized applications; note that buffer ions can influence microbial growth profiles.
  • Ionic strength: salts (NaCl, KCl) are often co-added (e.g., in nutrient broth formulations). Titrate salt content to organism tolerance.
  • Organic solvents: peptones are generally insoluble in typical organic solvents; avoid alcohols/ketones for dissolution.

Practical tips

  • Wetting: sprinkle powder slowly on vortexing water to prevent clumps; pre-wet with a small volume of water if needed.
  • Filtration: allow complete dissolution before sterile filtration (0.22–0.45 µm). Pre-filter through 5–1 µm if fines are present.
  • Sterilization: autoclaving at 121 °C for 15–20 min is standard for media components; validate heat stability for your formulation.

When to choose vegetable peptone vs alternatives

  • Choose vegetable peptone when avoiding animal-derived components (AOF/TSE concerns), for vegan/plant-only workflows, or when organism performance is superior to casein/meat-based peptones in your assay.
Storage & Reconstitution

Item-specific (from Product Data)

  • Storage conditions (dry material): Room temperature.
  • Shipped in: Normal conditions.

General best practices (not item-specific)

  • Container management: keep tightly closed in a clean, dry place. Protect from humidity to prevent caking and bioburden increase after opening. If possible, store in a desiccated cabinet.
  • Shelf life: consult CoA/label for lot-specific expiry/retest dates. Monitor appearance and odor; discard if signs of microbial spoilage or atypical clumping/odor occur.

Reconstitution/preparation (general)

  • Dissolve in DI/RO water with stirring. Typical working concentrations in media are 5–20 g/L (optimize per organism). Adjust pH and sterilize by autoclaving or 0.22 µm filtration as appropriate.
  • Sterile solutions: store at 2–8 °C and use promptly (commonly within 1–2 weeks). For longer storage, prepare aliquots and freeze at −20 °C; avoid repeated freeze–thaw cycles that can increase haze or precipitation.

Compatibility/stability notes

  • Avoid prolonged heating or exposure to high pH during prep to minimize Maillard reactions and amino acid degradation.
  • Always label solutions with concentration, pH, solvent, lot number, and preparation date for traceability.

Research Use Note

  • For research use only.
Structure & Identity

Item-specific (from Product Data)

  • SKU: V1528364
  • Product name: Vegetable Peptone
  • Grade/Purity: BioReagent
  • Storage: Room temperature
  • Shipped in: Normal conditions
  • CAS: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES / InChI / InChIKey: Not applicable to complex mixtures; not specified for this item.

What it is (general chemistry knowledge)

  • Vegetable peptone is a complex, undefined hydrolysate produced from plant proteins (commonly soy or wheat) via enzymatic and/or acid digestion, followed by refinement.
  • Composition: a heterogeneous mixture of short peptides, free amino acids, small carbohydrates, minerals, and trace growth factors. No single, discrete molecular structure exists.

Structural features (descriptive, general)

  • Functional groups present across the mixture include peptide bonds (amide linkages), carboxylates, protonated/deprotonated amines, and side-chain functionality from constituent amino acids (e.g., hydroxyl, thiol, indole, imidazole, guanidinium—depending on source and process).
  • 2D “structure” description: an ensemble of oligopeptides typically ranging from dipeptides to low-kDa fragments, interspersed with free L-amino acids and low levels of saccharides/minerals. No fixed stereochemistry for the mixture, though amino-acid residues are predominantly L-configured in origin.

Identity testing (general guidance)

  • Typical characterization relies on nitrogen content (Kjeldahl), total amino nitrogen (TAN), peptide size distribution (SEC), ash, chloride, and heavy metal limits; plus performance tests in standard culture media. Item-specific specs are not provided here—consult the CoA.
Synthetic Utility

Not a conventional synthetic reagent.

  • Vegetable peptone does not participate in discrete, stoichiometric organic transformations and is not typically used in small-molecule synthesis or as a defined catalyst/ligand.

Where it can be relevant (general)

  • Biocatalysis/whole-cell synthesis: serves as a nutrient component in media supporting whole-cell catalysts that perform chemo-, regio-, and stereoselective transformations (e.g., oxidations, reductions). In such cases, peptone enables the biological catalyst rather than acting as a reactant.
  • Immobilization matrices and enzyme preparations: occasionally included in formulations to stabilize microbial cells or crude enzyme preps during storage or lyophilization, though defined stabilizers are preferred for mechanistic studies.

If your objective is synthetic chemistry

  • Prefer defined reagents and buffers. Use vegetable peptone only as part of a biological production platform where organism health and productivity are the goals.
Target Specificity

Not applicable.

  • This product is a complex nutrient mixture, not a biomolecular probe or antibody. No target, epitope, clone, or species reactivity applies.

Need help choosing the grade?

Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.

View BioReagent grade guide →

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.