TAE Buffer (50×) - BioReagent,Biological Stain,for NA electrophoresis,50×

Cat. No.: T665578

CALIDAD & PUREZA BioReagent, Biological Stain, for NA electrophoresis, 50×

Synonyms

Tris-Acetate-EDTA Buffer (50×) | 50× TAE Buffe | Tris-Acetate-EDTA Electrophoresis Buffer (50×)

Storage

Room temperature

Shipped In

Normal

Application

Nucleic Acid Electrophoresis

Descripción general

50× TAE Buffer, also known as Tris-Acetate-EDTA Buffer, is a commonly used DNA electrophoresis buffer in molecular biology. The standard composition of 1× TAE working solution is: 40 mM Tris-acetate, 1 mM EDTA.

This product is a 50-fold concentrated solution, primarily containing 2 M Tris-acetate and 50 mM EDTA. For use, dilute 50-fold with distilled or deionized water to obtain a 1× working solution.

This reagent is for research use only. Not for use in diagnostic procedures or other purposes.

Procedure (For Reference Only)

Dilute the product to a 1× working solution with distilled or deionized water before use.

Notes

1. If the single-use volume is small, it is recommended to aliquot the reagent before use.

2. If a small amount of precipitate appears in the reagent, it usually does not affect usage.

3. Please wear laboratory appropriate attire and disposable gloves during operation.

4. Use the reagent as soon as possible after opening and keep it sealed to avoid affecting experimental results.

Especificaciones

Sinónimos

Tris-Acetate-EDTA Buffer (50×) | 50× TAE Buffe | Tris-Acetate-EDTA Electrophoresis Buffer (50×)

Especificaciones y pureza

BioReagent,Biological Stain,for NA electrophoresis,50×

Estabilidad y almacenamiento

Store at room temperature long term (12 months).

Condiciones de almacenamiento de almacenamiento

Room temperature

Enviado en

Normal

Grado

Biological Stain, BioReagent, for NA electrophoresis

Product Line

Productos biológicos