Mueller-Hinton Broth - BioReagent

Cat. No.: M1528409
Disponible para pedir
CALIDAD & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Suitable for microbiology ? Microbiology grade — suited to culturing and testing microorganisms. Use in microbial media, identification, and susceptibility work. without agar
Storage
Protected from light,Room temperature
Shipped In
Normal
Application
1159
★
Talla
Alemania (EU)
USA*
Precio
Cantidad
250g
M1528409-250g
Fabricado bajo pedido · 8–12 semanas
51,98€
Enter a quantity for the sizes you want to add.

Descripción general

For antimicrobial susceptibility testing by dilution method.


Medium Formula (g/L):

ComponentContent
Casamino Acids
17.5g
Beef Extract2.0g
Soluble Starch1.5g
pH (25℃)7.2±0.2

Instructions for Use:

Weigh 21.0 g of this product into 1 L of distilled or deionized water, boil to dissolve, dispense, autoclave at 121℃ for 15 minutes, cool and set aside.


Precautions:

1. Ensure all required apparatus are clean before preparation.

2. Wear a lab coat and disposable gloves during operation for your safety and health.

Especificaciones

Especificaciones y pureza
BioReagent, Suitable for microbiology, without agar
Estabilidad y almacenamiento
Store at room temperature long term (36 months).Store in the dark.
Condiciones de almacenamiento de almacenamiento
Protected from light,Room temperature
Enviado en
Normal
Grado
BioReagent, Suitable for microbiology
Product Line
M1528409-250g

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Propiedades químicas y físicas
SensibilidadLight-sensitive
Preguntas frecuentes y artículos
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols

Below are general, literature-based protocols employing Mueller-Hinton Broth. Adjust per current CLSI/EUCAST standards and your lab’s SOPs.

  1. Broth microdilution MIC (aerobes, nonfastidious):
  • Prepare cation-adjusted MHB if required by the method. Dispense 100 µL per well into a sterile 96-well plate with twofold antibiotic dilutions across columns.
  • Inoculum: Prepare a 0.5 McFarland suspension (~1–2 × 10^8 CFU/mL), then dilute to yield ~5 × 10^5 CFU/mL in wells after inoculation (e.g., add 100 µL inoculum at 1 × 10^6 CFU/mL to 100 µL broth).
  • Incubate 16–20 h at 35 ± 2 °C, ambient air.
  • MIC: lowest concentration with no visible growth (or OD600 threshold per SOP). Include growth and sterility controls plus quality-control strains (e.g., E. coli ATCC 25922).
  1. Time–kill assay:
  • Prepare test cultures in MHB at defined antibiotic multiples of MIC (e.g., 0.5×, 1×, 2×, 4×).
  • Inoculate to ~5 × 10^5–10^6 CFU/mL, incubate with shaking (150–250 rpm) at 35 ± 2 °C.
  • Sample at predefined intervals (0, 1, 2, 4, 6, 24 h), neutralize if needed, and plate for CFU enumeration.
  1. General cultivation/inoculum prep:
  • Inoculate target strain into MHB, incubate at 35–37 °C with aeration until mid-log phase (monitor OD600), standardize inoculum for downstream assays.

Note: Validate media lot performance and cation content for AST. Dispose of inoculated materials as biohazard.

Biological Roles

Mueller-Hinton Broth serves as a nutrient environment that supports the growth of a broad spectrum of aerobic, nonfastidious bacteria. While it has no biological role in vivo, its composition is tailored to balance growth support with minimal interference in antimicrobial testing (literature).

  • Functional components (literature, general):

    • Acid hydrolysate of casein: supplies a balanced array of free amino acids and small peptides readily assimilated by bacteria, facilitating robust, nonselective growth.
    • Beef infusion/peptone: contributes growth factors, vitamins, and trace minerals.
    • Starch: can absorb toxic metabolites or fatty acids and minimize antimicrobial carryover effects, improving assay consistency.
  • Performance characteristics important for AST (literature):

    • Neutral pH (~7.3 after sterilization) and low buffering reduce artifacts in antibiotic activity.
    • Controlled divalent cation content (Ca2+, Mg2+) is critical because it modulates the activity of several antibiotic classes (e.g., aminoglycosides, tetracyclines, polymyxins).
  • Applicability to organisms:

    • Suitable for Enterobacterales, staphylococci, pseudomonads, and many other nonfastidious species.
    • Fastidious organisms (e.g., Haemophilus, Neisseria) may require supplements or alternative media.
  • Experimental utility:

    • Supports reproducible growth kinetics for OD600 tracking, MIC/MBC determinations, and time–kill kinetics under standardized conditions.

Note: For regulated testing, ensure the broth meets the current CLSI/EUCAST requirements (often specified as cation-adjusted MHB for MIC determinations).

Buffer Applications

Mueller-Hinton Broth is not a dedicated buffering system. It exhibits only modest intrinsic buffering capacity around neutral pH (literature) and is therefore not typically used as a buffer for biochemical assays.

  • If pH control is critical, use a defined buffer (e.g., phosphate, HEPES, MOPS) prepared separately and, if compatible, added at validated concentrations that do not alter antimicrobial activity or bacterial physiology of interest.

  • For AST and general cultivation, the native pH of properly prepared MHB is typically sufficient; verify pH post-sterilization per method requirements. Avoid strong buffers that can interfere with antibiotic performance unless method-validated.

Green Alternatives

Although culture media are not typical targets of solvent replacement, sustainable practices can be applied to Mueller-Hinton Broth use:

  • Resource and waste minimization:

    • Prepare only the volume required for the planned assays to reduce disposal of unused sterile broth.
    • Use concentrated stock preparations judiciously; avoid repeated heat cycles that increase energy consumption and degrade nutrients.
  • Sterilization strategy:

    • Autoclave full loads efficiently to maximize energy use; consider validated membrane filtration (0.22 µm) for heat-labile supplements added post-sterilization.
  • Packaging and water use:

    • Opt for bulk containers when turnover is high to reduce packaging waste; reseal promptly to prevent moisture uptake (caking leads to waste).
    • Employ high-efficiency water purification systems with recovery features to reduce wastewater in labs with large media throughput.
  • Comparative perspective (literature, general):

    • Ready-to-use liquid media: saves prep time but increases shipping weight and packaging waste; higher carbon footprint.
    • Dehydrated media (this product): lower shipping mass/volume; user sterilization required but generally lower overall packaging and transport impact.
  • Decontamination and disposal:

    • Use validated autoclave cycles or chemical disinfectants appropriate for biological waste; segregate to avoid mixing with solvents/halogenated waste streams.

Implementing these practices can reduce environmental impact without altering the validated performance characteristics required for microbiology workflows.

Pharmaceutical Uses

No therapeutic or clinical uses are claimed. For research and quality-control contexts, Mueller-Hinton Broth is widely used in pharmaceutical microbiology workflows (literature, general):

  • QC microbiology:

    • Growth promotion testing of compendial organisms.
    • Preparation of standardized inocula for method suitability tests.
  • Antimicrobial testing:

    • MIC/MBC determinations of active pharmaceutical ingredients and finished products in development or release testing, often using cation-adjusted MHB per pharmacopeial/CLSI guidance.
  • Sterility/bioburden method development:

    • Nonselective enrichment medium component in method suitability/validation studies, when appropriate.
  • Compendial alignment (general):

    • Related media and methods are described across pharmacopeias (e.g., USP/EP) and CLSI/EUCAST standards; users must confirm the suitability of this specific product/lot for any regulated application via internal qualification.

Documentation: Retain CoA and, where applicable, growth promotion data and cation content verification as part of method qualification. Product is for research use only.

Physical Properties

As a dehydrated, complex microbiological medium, Mueller-Hinton Broth does not have single-molecule physical constants.

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet. (Typically a tan to light beige free-flowing powder, literature.)
  • Molecular weight / formula: Not applicable (mixture)
  • Melting/boiling point: Not applicable (mixture)
  • Density (powder): Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility: Water-soluble (literature). Prepared MHB is an aqueous solution; insoluble particulates should be minimal if fully dissolved.
  • pH (prepared medium, literature): ~7.3 ± 0.1 at 25 °C after sterilization (typical for standard MHB; not item-specific).
  • Osmolality/ionic strength (prepared, literature): Moderately low buffering capacity and defined cation content are important for antimicrobial testing, but exact values are manufacturer- and lot-specific.
  • UV/Vis cutoff, refractive index, logP, pKa: Not applicable/Not determined for complex media.

Notes for use (literature):

  • Dissolves readily in purified water with moderate stirring and gentle heat if needed; avoid overheating to prevent Maillard browning.
  • Filtration can remove undissolved fines if present; however, sterilization is usually by autoclaving.

Always consult the lot-specific CoA/Specification Sheet for pH and performance criteria; do not rely on generic literature values for method-critical work.

Quality and Grades
  • Item-specific grade: BioReagent. This denotes suitability for general laboratory and biological research applications, with quality attributes aligned to reproducible culture performance. It does not imply clinical/diagnostic use.

  • What BioReagent grade typically entails (general explanation):

    • Controlled raw material sourcing (protein hydrolysates/infusions and starch) and manufacturing to reduce lot-to-lot variability.
    • Functional quality controls such as growth promotion tests with representative nonfastidious organisms and verification of pH after preparation/sterilization (literature practice).
    • Monitoring of critical parameters (e.g., calcium and magnesium content for antimicrobial susceptibility testing), though exact specification limits are lot-dependent.
  • Specifications and stabilizers (item-specific):

    • Specific numeric specifications (e.g., cation content, pH tolerance, moisture) are Not specified for this item; refer to CoA/Spec Sheet.
    • No stabilizers are listed in the provided data.
  • Practical guidance:

    • For antimicrobial susceptibility testing (AST), choose media lots that meet CLSI/EUCAST performance criteria. Verify cation content and pH using the CoA.
    • For general cultivation, BioReagent grade is typically sufficient; for particularly sensitive assays, confirm with pilot tests.
  • Documentation: Retain lot CoA and, if applicable, performance certificates for audit trails in GLP/GMP-adjacent environments. This product is for research use only.

Reaction and Applications

This product is not used for organic synthesis; its applications are microbiological. Below are common laboratory uses (literature) that can be performed with this broth:

  • Antimicrobial susceptibility testing (AST):

    • Broth microdilution and macro-dilution MIC determinations for aerobic, nonfastidious bacteria. CAMHB (cation-adjusted) is often specified by CLSI/EUCAST; standard MHB may be acceptable for certain exploratory studies.
    • Time–kill assays and MBC determinations using serial dilutions in MHB.
  • General cultivation and maintenance:

    • Propagation of nonfastidious organisms for inoculum preparation, growth curves, and physiological studies.
    • Pre-culture before plating on Mueller-Hinton Agar for disk diffusion work.
  • Assay matrix:

    • Vehicle for evaluating antibiotic stability, protein binding effects (with/without supplements), and inoculum effects.
  • Practical tips (literature):

    • Verify pH (~7.3 after sterilization) and cation levels when results are method-critical. Deviations can alter activity of aminoglycosides, tetracyclines, and other agents.
    • Use standardized inoculum densities (e.g., 0.5 McFarland equivalents for MIC setups) and consistent incubation conditions (35 ± 2 °C, aerobic) unless organism-specific guidance dictates otherwise.
    • Avoid excessive glucose or blood supplementation unless method specifies; such changes can modulate antibiotic activity.

Note: Always align protocols with current CLSI/EUCAST documents and validate using control strains (e.g., E. coli ATCC 25922, S. aureus ATCC 29213) for quality assurance.

Reaction Conditions

In the context of media preparation (rather than chemical reactions), the following conditions are typical for Mueller-Hinton Broth (literature; not item-specific):

  • Concentration: 21 g per liter of purified water (corresponds to the classic MHB formulation lacking agar). Always verify the label/CoA for the exact mass per liter for this item.

  • Dissolution:

    • Add the dehydrated medium gradually to room-temperature water with stirring until fully dissolved. Gentle warming may be used to aid dissolution; avoid prolonged high temperatures pre-sterilization.
  • pH:

    • Adjust, if necessary, to ~7.3 ± 0.1 at 25 °C before sterilization. Many commercial formulations are pre-adjusted and require no pH modification. Confirm post-autoclave pH.
  • Sterilization:

    • Autoclave at 121 °C for 15 minutes (standard gravity-displacement cycle) unless otherwise specified by the manufacturer.
    • Alternatively, sterilize by 0.22 µm filtration when heat-labile supplements are present (base broth typically tolerates autoclaving).
  • Supplements:

    • For specific organisms or assays, supplements (e.g., cation adjustment, blood, NAD) may be added per method guidance, typically after sterilization and cooling to 45–50 °C or via sterile filtration.
  • Storage of prepared broth:

    • Store at 2–8 °C, protected from light; use within a validated period (often ≤30 days unopened, much shorter after opening), verifying sterility before use. Item-specific stability is Not specified for this item; refer to CoA/Spec Sheet.
Safety and Handling

GHS hazard classification for this specific item is not provided here. Always consult the product SDS for authoritative safety information.

  • GHS/Signal word/Pictograms: Not specified for this item; refer to SDS.
  • Primary hazards (general): Low inherent chemical hazard is typical for dehydrated culture media; main risks are dust inhalation, eye irritation, and potential allergenic response to protein hydrolysates (literature, general). Prepared media can support microbial growth—treat as biohazard after inoculation.
  • PPE recommendations (general good practice):
    • Lab coat, safety glasses, and appropriate disposable gloves.
    • Use a dust mask or work in a fume hood/biological safety cabinet when weighing to minimize dust inhalation.
  • Handling considerations:
    • Avoid creating airborne dust. Prevent contamination of the medium pre-sterilization.
    • Post-use/inoculated media must be decontaminated (e.g., autoclave) before disposal per institutional biosafety procedures.
  • Incompatibilities (general): Strong oxidizers and acids/bases may degrade organic components; moisture uptake can cause caking—keep container tightly closed.
  • First aid (general):
    • Inhalation: Move to fresh air; seek medical advice if irritation persists.
    • Eye/skin contact: Rinse with water for several minutes; remove contaminated clothing.
    • Ingestion: Rinse mouth; seek medical attention if unwell.
  • Fire safety: Organic powder; may combust if involved in fire. Use water spray, CO2, or dry chemical. Combustion may produce COx and nitrogenous compounds.

Defer to SDS and institutional biosafety guidelines for detailed risk assessments.

Solvent Selection

As a microbiological medium, Mueller-Hinton Broth is designed to be reconstituted in water; organic solvent selection is not applicable.

  • Primary solvent: Water (Type I or II reagent-grade water recommended; literature best practice). Use freshly prepared, low-endotoxin, low-ionic contamination water for method-critical work.

  • Miscibility and polarity (general):

    • Fully water-soluble; forms a clear to slightly opalescent solution when properly dissolved and sterilized (literature).
  • Practical preparation tips (literature):

    • Gradually sprinkle powder into room-temperature water under stirring to avoid clumping. Gentle warming can accelerate dissolution; avoid excessive heat prior to sterilization to limit Maillard reactions.
    • Adjust final volume after dissolution to maintain the intended concentration.
  • When to choose MHB vs alternatives:

    • Use MHB for antimicrobial susceptibility testing (AST) and general growth of nonfastidious bacteria.
    • Use cation-adjusted Mueller-Hinton Broth (CAMHB) when performing standardized MIC testing per CLSI/EUCAST.
    • For fastidious organisms, choose enriched media (e.g., supplemented MHB, or media containing blood/NAD) per organism requirements.

For solvent-related questions beyond water quality (e.g., filtration compatibility), consult the method and CoA; organic solvent systems are not typically relevant.

Storage and Reconstitution
  • Storage conditions (item-specific): Room temperature (as provided). Protect from moisture and light. Shipped under normal conditions.

  • Shelf life: Not specified for this item; refer to CoA/Spec Sheet. Keep container tightly sealed to prevent caking and loss of performance.

  • Reconstitution (literature, typical):

    • Weigh approximately 21 g of dehydrated Mueller-Hinton Broth per 1 L of purified water, or follow the mass-per-liter stated on the product label/CoA for this specific item.
    • Add powder gradually to water with stirring until fully dissolved. Adjust volume to target.
    • Check pH (target ~7.3 at 25 °C); adjust only if directed by the label/CoA.
    • Sterilize by autoclaving at 121 °C for 15 minutes. Allow to cool to room temperature. For heat-labile supplements, sterilize base broth first and add sterile-filtered supplements aseptically.
  • Prepared medium storage (general):

    • Store sterile broth at 2–8 °C in sealed, sterile containers. Avoid repeated warming/cooling cycles. Before use, inspect for turbidity/contamination.
    • Recommended in-use period is method- and container-dependent; Not specified for this item—validate per your SOP and refer to CoA/Spec Sheet.
  • Research use note: For research use only.

Always consult the lot-specific CoA/Spec Sheet and SDS for definitive preparation parameters, performance criteria, and safety guidance.

Structure and Identity

Mueller-Hinton Broth (MHB) is a complex, undefined culture medium used for bacterial growth and antimicrobial susceptibility testing. It is not a single chemical entity and therefore does not have a unique CAS number, SMILES, or InChIKey.

  • Item-specific identifiers:

    • SKU: M1528409
    • Product name: Mueller-Hinton Broth
    • Grade: BioReagent
    • Molecular formula: Not applicable (complex mixture)
    • Molecular weight: Not applicable (complex mixture)
    • CAS, InChIKey, SMILES: Not applicable for complex media; Not specified for this item; refer to CoA/Spec Sheet.
  • Structural features (general, literature):

    • Typically an undefined blend derived from protein hydrolysates (amino acids/peptides), starch, and beef infusion/peptones. No discrete covalent “structure” can be assigned.
    • Functionally contains amino acids, small peptides, carbohydrates, minerals, and nucleotides in trace amounts that support broad bacterial growth.
  • Conceptual 2D description:

    • Mixture of low– to medium–molecular-weight organic nutrients (amino acids/peptides) dispersed in water when prepared; no repeating polymeric or single-molecule structure.
  • Typical composition (literature, not item-specific):

    • Acid hydrolysate of casein, beef infusion/peptone, and starch (no agar in broth). Exact sources and ratios vary by manufacturer and lot.

Because this is a complex medium, identity and performance are verified functionally (growth promotion, cation content, and pH), rather than by single-molecule structural identifiers.

Synthetic Utility

Not applicable. Mueller-Hinton Broth is a biological culture medium and is not used as a reagent or building block in chemical synthesis. For relevant information, see the Reaction & Applications, Biological Roles, Reaction Conditions, and Application Protocols sections that address microbiological use.

Target Specificity

Not applicable. This product is not an antibody or affinity reagent and has no antigen/epitope specificity. It is a nonselective culture medium supporting growth of a broad range of nonfastidious bacteria (literature, general).

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.