Amine Coupling Kit

Cat. No.: A1507130
Disponível para encomenda
GRAU & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
★
Tamanho
Alemanha (EU)
USA*
Preço
Qtd
1kit
A1507130-1kit
Sob encomenda · 8–12 semanas
347,01€
Enter a quantity for the sizes you want to add.

Visão geral

  Amine Coupling Kit is a specialized set of reagents and materials used to covalent immobilization biomolecules (like antibodies, proteins, or peptides) carrying a primary amine group onto a carboxylated sensor surface for analysis using Surface Plasmon Resonance (SPR) biosensors.

The kit contains reagents sufficient for 30 to 50 immobilizations.

  The kit can be used with All Biacore™ systems except Biacore 4000, Biacore A100 and Biacore S51.

Contents and storage

A1507130Component 1 kitStorage
A1507130AN-Hydroxysuccinimide (NHS)115mg 2–8°C
A1507130B1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC)750mg 2–8°C
A1507130C1 M Ethanolamine hydrochloride-NaOH pH 8.510.5mL2–8°C

Instructions for Use

1.     Reagent preparation

a)       Dissolve the EDC and NHS by adding 10.0 mL of filtered, deionized water to each vial.

b)       Cap vials tightly and agitate until the solids are completely dissolved.

c)       Dispense the EDC and NHS solutions separately in aliquots for storage.

d)       Store the aliquots of EDC and NHS frozen at -18°C or below. Ethanolamine may be stored at 2°C to 8°C.

Note: Use aliquots within two months.

2.     Handling

a)       Thaw frozen aliquots and agitate them gently to make sure that the solutions are homogeneous.

b)       For Biacore systems with autosampler:

Place the aliquots separately in the autosampler as instructed in the software.

c)       For Biacore systems without autosampler:

Mix equal volumes of EDC and NHS immediately before use.

3.     Suggested immobilization procedure

This guideline provides recommendations for immobilization of ligands by amine coupling to Biacore™ sensor chips. The user needs to optimize the reaction conditions based on the actual situation.

a)       Activate the surface by injecting a mixture of EDC/NHS (1:1) for 6–10 min (30 s for Sensor Chip PEG).

b)       Immobilize the ligand by injecting the ligand solution for 5–10 min.

c)       Deactivate excess reactive groups by injecting ethanolamine for 6–7 min.

Important considerations

1.     EDC and NHS Reagent solutions should be freshly prepared and mixed shortly before use. The efficiency of the immobilization will be reduced if solutions are not fresh.

2.     The EDC/NHS ester has a short half-life, so ligand should be injected shortly after activation

Especificações

Especificações e pureza
BioReagent
Grau
BioReagent
Aplicação
Amine Coupling
Armazenamento e envio
Condições de armazenamento de armazenamento
Store at 2-8°C
Enviado em
Wet ice
Estabilidade e armazenamento
Store at 2-8℃ long term (12 months).
Contents & Storage
A1507130Component NameAppearance1 kitStorageQuantity Per Test
A1507130AN-Hydroxysuccinimide (NHS)White solid115mg 2–8°CPrepare according to instructions
A1507130B1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC)White solid750mg 2–8°CPrepare according to instructions
A1507130C1 M Ethanolamine hydrochloride-NaOH pH 8.5Colorless liquid10.5mL2–8°CPrepare according to instructions

Dados avançados

Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDataItem
ZJ26F0838805ZJ26F0838805Certificate of AnalysisSep 02, 2026 A1507130
FAQs e artigos
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Perguntas frequentes

What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at 2–8 °C. Refrigerated storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Precisa de ajuda para escolher o grau?

O nosso guia de seleção de graus abrange pureza, estado do estabilizador e adequação à aplicação para todas as variantes do nosso catálogo.

Ver o guia de graus BioReagent →

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.