Arginine Mycoplasma Solid Medium (ChP) - BioReagent

Cat. No.: A1528673
Disponível para encomenda
GRAU & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Tamanho
Alemanha (EU)
USA*
Preço
Qtd
250g
A1528673-250g
Sob encomenda · 8–12 semanas
190,82€
Enter a quantity for the sizes you want to add.

Visão geral

For cultivation of Mycoplasma

Especificações

Especificações e pureza
BioReagent
Condições de armazenamento de armazenamento
Room temperature
Enviado em
Normal
Grau
BioReagent
Product Line
Produtos biológicos

Dados avançados

Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Application Protocols

Item-specific, validated protocols are not provided in the Product Data. The following is a generalized workflow for arginine mycoplasma solid media; adapt to your SOPs and pharmacopeial method requirements.

General workflow (culture-based detection)

  • Preparation: Reconstitute and sterilize the medium as directed by the label/CoA. Pour plates under aseptic conditions and allow to set/dry.
  • Sample processing: Pre-enrich suspicious samples in mycoplasma broth if bioburden is expected to be low. Plate serial dilutions to facilitate colony isolation.
  • Incubation: 35–37 °C for several days in a humidified incubator; CO2 supplementation (e.g., 5%) may improve recovery for some species (literature guidance).
  • Reading: Inspect plates daily. Look for small “fried-egg” colonies typical of Mycoplasma. Observe pH indicator color changes consistent with arginine hydrolysis. Record results with plate images if required by QC.
  • Confirmation: Subculture suspect colonies and/or perform PCR or immunofluorescence confirmation according to SOPs.
  • Quality controls: Include positive and negative control strains each run. Perform growth promotion tests for new lots.

Important

  • Exact plate recipe (g/L), supplements, and indicator type are not specified for this item; refer to the CoA/Spec Sheet and ChP-specified methods.
Biological Roles

This medium exploits the metabolic trait of certain Mycoplasma species to hydrolyze arginine via the arginine dihydrolase pathway.

  • Target organisms: Mollicutes (genus Mycoplasma and related) that utilize arginine as an energy source. Mycoplasma lack a cell wall and have reduced genomes, necessitating rich media with sterols and growth factors (specific supplements for this item are not specified).
  • Metabolic principle (general/literature): Arginine → citrulline → ornithine + NH3 + CO2 via arginine deiminase system. Ammonia production increases pH in the local microenvironment; media often include a pH indicator that shifts color upon alkalinization, allowing visual detection.
  • Selectivity context: Arginine-positive species (e.g., members of the M. hominis group) are differentiated from glucose-fermenting species (e.g., M. pneumoniae group) that acidify glucose media. Using both arginine and glucose media provides a metabolic fingerprint.
  • Relevance to cell culture contamination: Mycoplasma can pass through 0.22 µm filters, evade routine detection, and alter host cell behavior and experimental outcomes. Culture on selective arginine media remains an important orthogonal method alongside PCR and DNA staining.
  • Performance controls: Include known arginine-hydrolyzing (positive) and non-hydrolyzing (negative) control strains to confirm the medium’s differential capability and to validate incubation conditions.

Notes

  • Specific growth factors (e.g., serum/sterol), antibiotics, and indicator systems for this item are not specified; consult CoA/Spec Sheet and institutional SOPs for supplementation requirements.
Buffer Applications

Buffer preparation is not a primary application for this product. While the final prepared medium will have a controlled pH suitable for Mycoplasma growth and metabolic indication, it is not designed to serve as a standalone lab buffer.

  • If a specific pH is required for testing or indicator performance, adjust only per the validated method or CoA instructions. Over-adjustment may impair growth or indicator response.
  • For general-purpose buffering needs in the lab, use dedicated buffer systems (e.g., phosphate, HEPES, Tris) prepared separately according to their standard recipes.
Green Alternatives

Microbiological culture media are generally water-based and, compared with many chemical reagents, are relatively benign. Nevertheless, sustainable practices can reduce environmental impact.

  • Solvent: Uses water as the preparation solvent — inherently greener than organic systems.
  • Energy use: Optimize autoclave loads and cycles to reduce energy consumption. Validate minimum effective sterilization parameters per SOPs.
  • Waste minimization: Prepare only the quantity of plates needed. Consider smaller batch sterilization and just-in-time pouring to minimize expired plates.
  • Packaging: Where possible, select bulk formats that match usage rates to limit plastic waste from multiple small bottles. Ensure desiccant packs are reused when appropriate.
  • Alternatives/Approaches:
    • For screening workflows, complement culture-based tests with nucleic acid assays to reduce repeat culturing cycles (balanced against regulatory acceptance).
    • Reusable glassware for media preparation and pouring can lower disposable plastic use, with proper sterilization controls.

Trade-offs

  • Culture-based mycoplasma detection is pharmacopeially recognized and may be required, even if molecular assays are faster. Adherence to ChP methods may limit substitution options.

Conclusion

  • This product already aligns with greener laboratory principles due to its aqueous, low-toxicity nature. Focus sustainability efforts on energy efficiency, right-sizing batches, and responsible biohazard waste treatment.
Pharmaceutical Uses

Therapeutic or clinical uses are not applicable. This product is intended strictly for laboratory research and quality control.

Relevant roles in regulated environments

  • QC Microbiology: Culture-based detection of Mycoplasma contamination in biologics manufacturing (e.g., cell banks, vaccines, recombinant protein production), aligned with pharmacopeial methods. The ChP designation indicates intent to support workflows consistent with the Chinese Pharmacopoeia; verify exact compliance via CoA and validated SOPs.
  • Method integration: Often used alongside enrichment broths, indicator media (arginine and glucose), and confirmatory staining/PCR to satisfy multi-pronged mycoplasma testing requirements.
  • Documentation: Maintain traceability (lot numbers, CoA, preparation records, incubation logs, and growth promotion results) for audits.

Notes

  • No medical, diagnostic, or therapeutic claims are made. Use is limited to research and non-clinical QC under appropriate laboratory conditions.
Physical Properties

As a dehydrated culture medium (solid), physicochemical values for a single compound are not applicable. Practical properties relevant to handling and preparation are provided as general literature guidance only.

Item-specific values

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Moisture limits, pH of prepared medium, gel strength, and clarity: Not specified for this item; refer to CoA/Spec Sheet.

General/literature characteristics for dehydrated agar media (not item-specific)

  • Form: Free-flowing dehydrated powder; upon reconstitution/sterilization, sets to a firm gel (plate medium).
  • Solubility: Designed to dissolve/disperse in purified/deionized water with heating and agitation.
  • Prepared medium pH: Typically mildly acidic to neutral at 25 °C, tuned for Mycoplasma growth; exact target pH is formulation-dependent (literature).
  • Color: Medium to light tan powder; prepared plates may be amber to reddish/orange if indicator is present (literature, formula-dependent).
  • Stability: Stable at room temperature in a tightly closed container under dry conditions; avoid humidity to prevent caking and degradation (general practice).
  • Sterilization: Commonly by autoclaving at 121 °C for 15 minutes (literature, see Storage & Reconstitution for general guidance).

Important

  • Do not treat the above as product specifications. For exact preparation volumes, pH set-points, and performance criteria (e.g., growth promotion test organisms), consult the product label and CoA/Spec Sheet.
Quality and Grades
  • Grade: BioReagent — indicates suitability for biological and microbiological laboratory use. BioReagent-grade culture media components are controlled for consistent performance in growth promotion and selectivity tests appropriate to their intended use.
  • Standard/Monograph: (ChP) — denotes alignment with the Chinese Pharmacopoeia framework for mycoplasma detection using arginine-based media. This suggests the formulation and performance characteristics are intended to meet ChP expectations for quality control testing. Exact compliance details, including acceptance criteria and test organisms, are not specified here and should be confirmed via the CoA/Spec Sheet.
  • Lot-to-lot consistency: Critical for microbiological media. Growth promotion testing (GPT), sterility, pH of prepared medium, and gel strength are typically evaluated; item-specific targets: Not specified for this item; refer to CoA/Spec Sheet.
  • Additives/indicators: Many arginine mycoplasma agars include a pH indicator to visualize arginine hydrolysis. The specific indicator system and any selective supplements for this item are: Not specified for this item; refer to CoA/Spec Sheet.
  • Stabilizers/antimicrobial inhibitors: Not specified for this item; refer to CoA/Spec Sheet.

Practical notes

  • Use validated water quality (e.g., purified/deionized) and follow aseptic technique to match BioReagent expectations.
  • Documented adherence to ChP is important for regulated QC. Retain CoA and preparation records for audit trails.
Reaction and Applications

As a culture medium, this product is not used as a chemical reagent in synthetic reactions. Its core application is the isolation and detection of Mycoplasma spp. that hydrolyze arginine in accordance with Chinese Pharmacopoeia practices.

Key applications

  • Detection/confirmation of arginine-positive Mycoplasma (e.g., members of the M. hominis group) via arginine dihydrolase pathway. Hydrolysis of arginine elevates alkalinity, typically visualized by a color change in an embedded pH indicator (indicator for this item not specified).
  • Environmental and process monitoring in cell culture facilities: plating suspected contaminants from cultures, media, or equipment rinses.
  • QC testing of biologicals (e.g., cell banks, viral stocks, recombinant protein production) where pharmacopeial mycoplasma testing is required; this medium complements broth/enrichment steps and DNA-based methods.

Practical notes

  • Pre-enrichment: Often, samples are first incubated in liquid mycoplasma medium to amplify low-level contamination, then streaked onto arginine solid medium.
  • Incubation: Mycoplasma commonly require 37 °C in a 5% CO2 or humidified atmosphere and extended incubation (several days) due to slow growth (general literature guidance; verify against method SOPs).
  • Colony morphology: “Fried-egg” colonies under stereomicroscopy are characteristic of certain species; overlay techniques (e.g., Dienes stain) may assist visualization.
  • Controls: Include positive control strains (arginine-hydrolyzing) and negative controls (arginine-negative species) for performance verification.

Refer to internal SOPs and the product CoA/Spec Sheet for item-specific preparation and performance criteria.

Reaction Conditions

Chemical reaction conditions are not applicable. For microbiological use, the relevant “conditions” pertain to medium preparation and incubation. The following are general literature guidelines; follow the product label/CoA and your SOPs for validated parameters.

Preparation (general guidance)

  • Reconstitution: Weigh the dehydrated medium per the label’s grams-per-liter instruction (not specified for this item) and dissolve in purified/deionized water with stirring. Heat gently to aid dissolution.
  • Sterilization: Autoclave at 121 °C for 15 minutes. Do not over-autoclave to avoid indicator degradation (if present) and nutrient caramelization.
  • Supplements: If required (e.g., serum/sterols/antibiotics), add aseptically after cooling the sterilized medium to 45–55 °C, then pour plates.

Incubation (general guidance)

  • Temperature/atmosphere: 35–37 °C; many Mycoplasma benefit from 5% CO2 and high humidity.
  • Duration: Several days; inspect daily due to slow growth.
  • Controls: Include positive/negative controls to validate medium performance.

Item-specific formulation details (g/L, target pH, indicator type) are not specified for this item; refer to CoA/Spec Sheet.

Safety and Handling

Safety information for this specific item is not provided in the Product Data; consult the SDS for authoritative guidance.

GHS classification (item-specific)

  • Signal word: Not specified for this item; refer to SDS.
  • Hazard statements (H-codes): Not specified for this item; refer to SDS.
  • Pictograms: Not specified for this item; refer to SDS.

General handling precautions for dehydrated microbiological media

  • PPE: Wear laboratory coat, safety glasses, and appropriate gloves. Use a dust mask/respirator if dust generation is likely.
  • Avoid dust formation and inhalation. Handle under local exhaust when weighing.
  • Microbiological risk: While the medium itself is non-pathogenic, once inoculated it will contain viable microorganisms. Employ BSL-2 practices for Mycoplasma work, including biological safety cabinet (Class II) where aerosol generation is possible.
  • Incompatibilities: Avoid moisture and strong oxidizing agents. Keep container tightly closed.
  • First aid (general): If inhaled, move to fresh air. In case of eye contact, rinse with water for several minutes, remove contact lenses. Skin contact: wash with soap and water. If ingested, rinse mouth and seek medical advice. Always follow SDS.
  • Heat/pressure: Use caution during autoclaving; allow media to cool before handling. Do not tightly cap vessels during sterilization to prevent pressure buildup.
  • Waste: Autoclave or chemically disinfect used plates and cultures prior to disposal per institutional biosafety procedures.
Solvent Selection

This product is a dehydrated solid medium intended to be reconstituted with water; organic solvent selection is not applicable.

  • Primary solvent: Purified/deionized water (typical for microbiological media preparation; autoclave-compatible).
  • Miscibility: The formulation is designed to dissolve/disperse in water with heat and agitation. Avoid organic solvents that may denature nutrients or indicators.
  • Practical guidance:
    • Add the measured powder gradually to cool or room-temperature water while stirring to avoid clumping.
    • Gentle heating can aid dissolution; avoid boiling before full dissolution to minimize caramelization/precipitation of components.
    • Adjust volume to final after dissolution and before sterilization.
  • Alternatives: Not applicable. If selective supplements or antibiotics are needed, prepare them in their recommended solvents and add aseptically after sterilization and cooling of the base medium (typically to 45–55 °C), following each supplement’s instructions.

Item-specific water volume (g/L) and pH targets: Not specified for this item; refer to CoA/Spec Sheet.

Storage and Reconstitution

Item-specific storage and shipping

  • Storage conditions: Room temperature (per Product Data). Keep tightly closed in a dry place with desiccant to prevent moisture uptake.
  • Shipped in: Normal (per Product Data).

Reconstitution and preparation (general guidance; follow label/CoA for exact quantities)

  • Water quality: Use purified/deionized water.
  • Weighing: Accurately weigh the dehydrated medium per the label’s grams-per-liter instruction (not specified for this item; refer to CoA/Spec Sheet).
  • Dissolution: Add powder gradually to water with constant stirring. Apply gentle heat until fully dissolved.
  • Sterilization: Autoclave at 121 °C for 15 minutes. Avoid over-sterilization to preserve indicators and nutrients.
  • Supplements: If required by your method (e.g., serum/sterols, antibiotics), cool the medium to 45–55 °C before aseptic addition. Mix gently, then pour plates.
  • Plate drying: Allow plates to solidify and surface-dry under sterile conditions to achieve suitable surface moisture for streaking.

Shelf-life and stability

  • Unopened powder: Stable at room temperature when dry; protect from humidity and excessive heat. Specific shelf-life: Not specified for this item; refer to CoA/Spec Sheet.
  • Prepared plates: Typically store at 2–8 °C in the dark, sealed to prevent desiccation; use within the timeframe established by your QC program (literature guidance). Exact hold time: Not specified for this item; refer to CoA/Spec Sheet.

Research use note: For research use only (per Product Data).

Structure and Identity

This product is a complex, multi-component culture medium formulated for the isolation and detection of Mycoplasma species via arginine metabolism in accordance with the Chinese Pharmacopoeia (ChP) framework.

  • Product type: Dehydrated solid culture medium (microbiology), enriched for detection of arginine-hydrolyzing Mycoplasma.
  • Composition identity: Complex mixture of organic and inorganic nutrients, peptones/yeast derivatives, arginine source, pH indicators, and solidifying agent (typical for solid media). Exact formulation: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not applicable (mixture).
  • Molecular weight: Not applicable (mixture).
  • SMILES / InChI / InChIKey: Not applicable (mixture).
  • Structural features (descriptive): A heterogenous blend of amino-acid/peptide nitrogen sources, salts, carbon sources, selective components centered on arginine metabolism, and an agar (or equivalent) matrix for plate solidification. Includes an indicator system to visually report arginine hydrolysis by pH change (general for arginine mycoplasma agars; specific indicator not specified for this item).
  • Physical form (from Product Data): Not specified for this item; refer to CoA/Spec Sheet. Category indicates life science microbiology use.

Notes

  • This is not a single chemical entity; identifiers such as CAS, CID, and structural keys do not apply.
  • Alignment to ChP implies adherence to the Chinese Pharmacopoeia monograph intent (see Quality & Grades).
Synthetic Utility

Not applicable. This is a microbiological culture medium and is not used as a reagent or building block in chemical synthesis.

For users operating mixed facilities (chemistry and microbiology):

  • Segregate chemical synthesis areas from microbiology suites to prevent cross-contamination.
  • Refrain from adding organic solvents or reactive chemicals to this medium unless expressly specified by validated microbiological methods.
Target Specificity

No antibody or molecular probe specificity applies to this product. As a selective/differential culture medium, its functional specificity is microbiological rather than biochemical.

  • Intended target: Mycoplasma spp. capable of arginine hydrolysis (functional phenotype), aligned with ChP detection workflows.
  • Non-targets: Organisms lacking the arginine dihydrolase pathway will not produce the characteristic alkalinization response; however, some may still grow depending on the formulation. Exact selectivity for this item is not specified; verify with control strains per CoA/Spec Sheet and SOPs.

Precisa de ajuda para escolher o grau?

O nosso guia de seleção de graus abrange pureza, estado do estabilizador e adequação à aplicação para todas as variantes do nosso catálogo.

Ver o guia de graus BioReagent →

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.