EB Solution (10 mg/mL) - BioReagent, Suitable for electrophoresis, 10 mg/ml in DMF , CAS No.1239-45-8

CAS: 1239-45-8 Cat. No.: E1526364 Fórmula: C21H20BrN3 Peso molecular: 394.32 Número CE: 214-984-6
Disponível para encomenda
GRAU & PUREZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Suitable for electrophoresis ? Electrophoresis grade — low ionic/UV impurities for clean gel runs. Use in agarose/PAGE electrophoresis where impurities distort bands. 10 mg/mL in water (solubilized with DFM)
Synonyms
10 mg/ml Ethidium Bromide Aqueous Solution
Storage
Protected from light,Room temperature
Shipped In
Normal
Application
978
★
Tamanho
Alemanha (EU)
USA*
Preço
Qtd
10ml
E1526364-10ml
Sob encomenda · 8–12 semanas
34,62€
Enter a quantity for the sizes you want to add.

Visão geral

Ethidium Bromide (molecular formula: C₂₁H₂₀BrN₃, molecular weight: 394.31) is a highly sensitive fluorescent dye used for visualizing DNA in agarose and polyacrylamide gels. It emits an orange-red fluorescence signal when excited by a 302 nm UV transilluminator. EB is toxic; all EB-containing solutions must be decontaminated before disposal to prevent environmental pollution.  EB Solution (10 mg/mL) is prepared with sterile double-distilled water and is widely applied in electrophoresis of DNA and RNA samples.

Required Materials:

1. Electrophoresis running buffer (e.g., TAE, TBE)

2. Microwave oven

3. UV analyzer or gel documentation imaging system

Operating Protocol:

1. Melt 50 mL agarose gel solution (commonly 0.8-2% concentration) in a microwave oven.

2. Add 50–100 μL Ethidium Bromide stock solution (10 mg/mL) and mix gently to avoid air bubbles.

3. Pour the gel when cooled to 50–60°C (touchable without scalding). After complete solidification, remove the comb, submerge the gel in electrophoresis buffer, and load samples for electrophoresis.

4. Observe, photograph and document the results under a UV analyzer or gel imaging system.

Precautions:

1. Gel thickness should not exceed 0.5 cm; excessive thickness will reduce detection sensitivity.

2. Avoid prolonged UV exposure when recovering DNA fragments via gel electrophoresis.

3. EB is toxic and irritates the skin and eyes. Handle with extreme caution.

4. For personal safety, wear a lab coat, disposable gloves and a face mask during operation.

5. This product is for scientific research use by qualified professionals only. It must not be used for clinical diagnosis or treatment, food or pharmaceutical production, nor stored in residential premises.

Especificações

Sinónimos
10 mg/ml Ethidium Bromide Aqueous Solution
Especificações e pureza
BioReagent, Suitable for electrophoresis, 10 mg/mL in water (solubilized with DFM)
Estabilidade e armazenamento
Store at room temperature long term (12 months).Store in the dark.
Condições de armazenamento de armazenamento
Protected from light,Room temperature
Enviado em
Normal
Grau
BioReagent, Suitable for electrophoresis
Product Line
Produtos biológicos
Nomes e identificadores
SMILES isoméricas
CC[N+]1=C2C=C(C=CC2=C3C=CC(=CC3=C1C4=CC=CC=C4)N)N.[Br-]
WGK Alemanha
3
RTECS
SF7950000
Número UN
2810
Grupo de embalagem
III
Peso molecular
394.32
Reaxys
3642536
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=3642536&ln=

Dados avançados

Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDataItem
ZJ26F1040236ZJ26F1040236Certificate of AnalysisOct 28, 2026 E1526364
Propriedades químicas e físicas
SensibilidadeLight-sensitive
Ponto de fusão (°C)260-262°C
Segurança e perigos (GHS)
Pictograma(s)
GHS06,   GHS08
Sinal
Danger
Declarações de perigo

H341:Suspected of causing genetic defects

H302:Harmful if swallowed

H330:Fatal if inhaled

Declarações de precaução

P405:Store locked up.

P501:Dispose of contents/container to an approved waste disposal plant.

P264:Wash hands [and …] thoroughly after handling.

P260:Do not breathe dust/fume/gas/mist/vapors/spray.

P284:[In case of inadequate ventilation] Wear respiratory protection.

P281:Use personal protective equipment as required.

P271:Use only outdoors or in a well-ventilated area.

P270:Do not eat, drink or smoke when using this product.

P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P403+P233:Store in a well-ventilated place. Keep container tightly closed.

P330:Rinse mouth.

P320:Specific treatment is urgent (see ... on this label).

P203:Obtain, read and follow all safety instructions before use.

P301+P317:IF SWALLOWED: Get medical help.

P318:if exposed or concerned, get medical advice.

P316:Get emergency medical help immediately.

WGK Alemanha
3
RTECS
SF7950000
Reaxys
3642536
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=3642536&ln=
Classe
6.1
Índice Merck
4731
FAQs e artigos
Citations of This Product
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Perguntas frequentes

What does suitable for electrophoresis mean?
suitable for electrophoresis indicates that the product has been processed and tested for electrophoresis and blotting. Typical specifications include low or undetectable nuclease/protease activity, low endotoxin, controlled microbial limits and high lot-to-lot reproducibility.
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at room temperature, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1239-45-8, the molecular formula is C21H20BrN3, and the molecular weight is 394.32 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.