GRAU & PUREZABioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.Total Nitroge ≥10%
This product is a homogeneous powder with soft texture, free of peculiar odors, caking and impurities visible to the naked eye. Its core component is small-molecule peptides produced from donkey-hide gelatin as the starting raw material via targeted hydrolysis and other technologies, widely applicable to industries including food and cosmetics.
Especificações
Sinónimos
CCAP | Colla Corii Asini Oligopeptides
Especificações e pureza
BioReagent, Total Nitroge ≥10%
Estabilidade e armazenamento
Store at room temperature long term (24 months).Store in the dark.
Condições de armazenamento de armazenamento
Protected from light,Room temperature
Enviado em
Normal
Grau
BioReagent
Product Line
Produtos biológicos
Dados avançados
Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Find and download the COA for your product by matching the lot number on the packaging.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Revisões
Avaliações dos Clientes
Application Protocols
No validated, item-specific application protocols are provided in the Product Data. The following general-use outlines for peptide mixtures are literature-based and should be optimized for your system.
Preparation of aqueous stock
Calculate target concentration (e.g., 10 mg/mL). 2) Add ~80% of final volume of water or buffer. 3) Sprinkle peptide powder slowly under stirring. 4) Mix 10–30 min; gentle warming (≤37 °C) or brief sonication can aid dissolution. 5) Adjust to volume; filter if required (0.22–0.45 µm).
Protease activity assay (generic)
Dissolve peptides at 1–5 mg/mL in enzyme-compatible buffer. Add protease at 1:100 (w/w). Incubate at 37 °C for 1–4 h. Analyze cleavage by LC–MS or OPA/TNBS assays (decrease in intact average MW; increase in free amines).
Surface adsorption study (generic)
Prepare 0.1–1 mg/mL solutions in buffer. Expose cleaned substrates (glass, metals, polymers) for 10–60 min at RT. Rinse and quantify adsorption by QCM-D, ellipsometry, or XPS/N1s signal.
Storage of working solutions
Keep on ice or at 2–8 °C for short-term use; aliquot and freeze (−20 to −80 °C) for longer storage to minimize microbial growth; avoid repeated freeze–thaw.
These are general guidelines, not product specifications. Validate conditions for your specific assay.
Biological Roles
Scope note: The following summarizes general biochemical aspects of collagen-derived peptide mixtures; it is not specific to this item and makes no clinical or therapeutic claims.
Composition and motifs (literature/general)
Collagen-derived peptides are rich in Gly–X–Y motifs (X and Y frequently Pro and Hyp). These sequences influence triple-helix propensity in longer chains, while short fragments impact protein–protein and protein–mineral interactions.
Amino acids: Dominated by glycine, proline, hydroxyproline, with contributions from alanine, glutamate/aspartate, and others.
Biochemical interactions (literature/general)
Serve as substrates for matrix metalloproteinases (MMPs) and other proteases; cleavage patterns are used to study enzyme specificity.
Exhibit cation-chelating and surface-binding tendencies via carboxylate and amide functionalities, relevant to mineralization studies and biomaterials interfaces.
In in vitro systems, peptides can modulate osmotic balance and colloid stability depending on sequence distribution and concentration.
Analytical utility
Provide complex peptide backgrounds for developing mass spectrometric search parameters, retention time calibration in LC separations, and testing of sample-prep robustness.
Degradation and metabolism (general)
In biological milieus, peptides are typically cleaved by endo/exopeptidases to free amino acids and di/tripeptides; rates depend on sequence and conformation.
Item-specific biological roles/data are not provided; refer to the CoA/SDS for any experimentally supported characteristics of this product lot.
Buffer Applications
Not a conventional buffering agent. Ejiao Peptides do not represent a defined acid/base pair with a known pKa suitable for precise pH control, so they are not typically used as primary buffers.
General laboratory context (literature/general)
As peptide solutes, they are commonly prepared in pre-made buffers appropriate to the assay (e.g., phosphate, HEPES, Tris, acetate). Selection should prioritize compatibility with detection modality (UV, MS) and enzymes, if any.
For protease assays, use low-salt, enzyme-compatible buffers; avoid chelators if studying metalloproteases, and avoid amines (e.g., Tris) if they interfere with downstream derivatizations.
For LC–MS applications, volatile buffers such as ammonium formate/acetate or 0.1% formic acid in water are preferred.
Practical tips
Adjust the buffer pH before adding peptides to minimize exposure to extreme pH that could hydrolyze or modify residues.
Filter final solutions (0.22–0.45 µm) to remove particulates introduced during dissolution.
Item-specific buffer recommendations and pH ranges are not specified for this item; consult your workflow requirements and validate empirically.
Green Alternatives
Context: Ejiao Peptides are a naturally derived peptide mixture; the “green” conversation centers on source sustainability, processing efficiency, and avoidance of hazardous reagents, rather than solvent substitution typical for small-molecule synthesis.
Comparative perspective (general)
Natural peptide hydrolysates vs. synthetic peptides:
Resource use: Hydrolysates leverage by-product collagen streams; synthetic peptides require petrochemical-derived reagents and often protecting-group chemistry with significant solvent footprints.
Process intensity: Enzymatic hydrolysis at moderate conditions can reduce energy and hazardous waste relative to strong acid/alkali hydrolysis.
Consistency: Synthetic peptides offer high sequence control; hydrolysates provide lower environmental intensity but higher compositional variance.
Greener processing options (literature/general)
Favor enzymatic hydrolysis over harsh chemical hydrolysis to minimize salts and neutralization waste.
Utilize water-based processing with efficient membrane separations (UF/DF) to tune MW distribution.
Implement low-temperature drying (e.g., lyophilization) powered by renewable energy to cut carbon footprint.
Trade-offs
Batch variability and supply-chain considerations (species origin, traceability) must be balanced against reduced synthetic waste.
Note: Sourcing, certification (e.g., ethical supply, trace residues), and exact processing for this item are not specified; consult the supplier’s CoA/quality documents for sustainability details relevant to your compliance framework.
Pharmaceutical Uses
No clinical or therapeutic claims are made. The following discusses general formulation roles of peptide/gelatin hydrolysates in manufacturing contexts; not specific to this item.
General formulation roles (literature/general)
Protein/peptide hydrolysates can function as stabilizers or film formers in non-parenteral formulations, coatings, and process aids where proteinaceous matrices are desirable.
In analytical and process development, peptide mixtures serve as placebo actives or matrix simulants to validate extraction, cleanup, and quantitation workflows.
As excipients, related materials (e.g., gelatin) are known for encapsulation and tablet binding; hydrolysates can adjust viscosity, wetting, and spray-drying characteristics.
Compliance considerations
Use in regulated products requires grade-specific documentation (e.g., pharmacopeial monographs, BSE/TSE statements, traceability). Such data are not specified for this item.
This product is designated BioReagent and For research use only (per Product Data) and is not supplied under GMP or compendial specifications.
For any formulation or manufacturing evaluation, obtain detailed impurity, microbiological, and residual solvent data from the CoA/Spec Sheet for the specific lot.
Physical Properties
Item-specific facts (from Product Data)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight (average or range): Not specified for this item; refer to CoA/Spec Sheet.
Other physicochemical specs (water, ash, metal content, pH of solution, UV cutoff): Not specified for this item; refer to CoA/Spec Sheet.
Literature/general properties for collagen-derived peptide hydrolysates (not item-specific)
Physical form: Typically light-colored powder or flakes that are freely soluble in water; insoluble in most nonpolar organic solvents.
Solubility (literature): High in water; often soluble across a broad pH (e.g., pH 2–9) with potential for turbidity near isoelectric points depending on composition. Limited in alcohols; negligible in hydrocarbons and ethers.
Average MW distribution (literature): Commonly 0.3–5 kDa for hydrolysates; narrower or broader depending on process.
pI/pKa: Mixtures exhibit composite acid–base behavior; apparent pI depends on amino acid composition (often slightly acidic to neutral for collagen hydrolysates). Specific pKa values are sequence-dependent.
Density/bulk density (literature): Variable for powders (commonly 0.2–0.7 g/mL as bulk density); true density near 1.3–1.4 g/cm³ for polypeptides.
Hygroscopicity: Peptide powders can be moderately hygroscopic, taking up moisture from air and caking over time.
Optical: Aqueous solutions typically show strong UV absorbance at ~200 nm (peptide bond), weak at 280 nm unless aromatic residues are abundant.
Note: Values in this section under “literature/general” are typical of similar peptide hydrolysates and are provided for context only; consult the item’s CoA for definitive specifications.
Quality and Grades
Item-specific grade (from Product Data)
Grade: BioReagent.
What BioReagent typically implies (general guidance)
Intended for laboratory research workflows in the life sciences (protein/peptide work, biochemical assays, method development).
Emphasis on consistent performance in biological contexts (e.g., cell-free enzyme assays, binding studies), with attention to common biochemical contaminants (e.g., excessive endotoxin, heavy metals, residual solvents). Specific acceptance criteria must be verified on the CoA/Spec Sheet for this item.
Does not equate to clinical, GMP, or pharmaceutical grade; not for human or animal administration.
Stabilizers/additives
Stabilizers, preservatives, or anti-caking agents are not specified for this item; refer to CoA/Spec Sheet.
Batch documentation and verification (recommended practice)
Review the CoA for: peptide content (e.g., % nitrogen or % peptide), moisture, ash, average MW distribution profile (e.g., SEC/HPSEC, MALDI), microbial limits/endotoxin if controlled, and residual processing reagents.
For sensitive applications, perform incoming QC: dissolve a representative sample, check clarity/turbidity, pH, UV scan (190–350 nm), and optionally a quick LC–MS profile to confirm lot-to-lot consistency suitable for your workflow.
Reaction and Applications
Item-specific applications (from Product Data)
Manufacturer applications: Not specified for this item.
General research uses for collagen-derived peptide mixtures (literature/general)
Biochemical assays: Serve as substrates for proteases (e.g., collagenase, gelatinase/MMPs) in activity screens; monitor peptide cleavage by LC–MS or colorimetric peptide-bond assays.
Materials research: Employed as components in biopolymer films, hydrogels, and coating formulations to study adhesion, wettability, and protein–surface interactions.
Nutritional/analytical chemistry: Used as positive controls for amino acid analysis, nitrogen determination (Kjeldahl/Dumas), and method validation in peptide quantitation.
Cell-free systems: Useful as generic peptide standards for optimizing extraction, precipitation, and desalting workflows, and to test proteomics sample prep (e.g., solid-phase extraction recovery, desalting efficiency).
Enzymatic processing: Starting material for generating defined oligopeptide fractions via controlled proteolysis, followed by fractionation (SEC, HILIC) for structure–function studies.
Practical notes
For enzymatic studies, characterize the mixture by average MW and aromatic content (A280) to normalize dosing across experiments.
Minimize prolonged exposure to high pH/temperature to reduce racemization and peptide bond hydrolysis that could alter assay outcomes.
Use inert containers (glass or low-binding plastics) to limit non-specific adsorption, especially for low-concentration solutions.
Reaction Conditions
Item-specific reaction conditions are not provided for this product. The following are general handling/processing conditions for peptide mixtures (literature/general) and should be validated experimentally.
Dissolution and handling
Solvent: Water or assay buffer. Typical concentrations: 0.1–50 mg/mL depending on viscosity and application.
Temperature: Dissolve at 20–37 °C with stirring; avoid >60 °C for extended periods to limit degradation.
Filtration: 0.22–0.45 µm to clarify.
Enzymatic treatments
Proteolysis: Enzyme:substrate ratios commonly 1:50 to 1:200 (w/w); temperatures 25–37 °C; pH per enzyme optimum (e.g., trypsin pH 7.5–8.5; collagenase near neutral). Time: 30 min–16 h.
Quenching: Heat-inactivate enzymes (e.g., 70–95 °C for several minutes) or adjust pH/salts as appropriate.
Chemical coupling/crosslinking
EDC/NHS activation in MES buffer pH ~5–6; monitor reaction within 0.5–4 h at RT. Optimize based on amine content.
Amine-reactive dye labeling (NHS-esters): pH 7.5–8.5, molar excess dye 5–20× vs. accessible amines; react 30–120 min in dark.
Drying and isolation
Lyophilization from aqueous solutions preserves structure; avoid strong vacuum/heat that can cause Maillard-like discoloration in presence of sugars.
These ranges are typical literature values and are not specifications for this item.
Safety and Handling
Item-specific safety (from Product Data)
GHS Classification: Not specified for this item; refer to SDS.
Signal word / Pictograms / H-statements: Not specified for this item; refer to SDS.
Shipping: Normal (per Product Data).
Storage: Protected from light, Room temperature (per Product Data).
General safety guidance for peptide mixtures (not item-specific; defer to SDS)
Expected hazards: Proteinaceous/peptide materials are generally considered low acute toxicity; however, dust may cause mechanical irritation to eyes/respiratory tract. Sensitization (allergic responses) is possible for protein-derived materials in susceptible individuals.
PPE: Wear lab coat, safety glasses, and nitrile gloves. Handle powders in a fume hood or ducted enclosure to minimize dust inhalation.
First aid (overview):
Inhalation: Move to fresh air; seek medical advice if symptoms persist.
Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do.
Skin contact: Wash with soap and water; remove contaminated clothing.
Ingestion: Rinse mouth; do not induce vomiting; seek medical attention if unwell.
Incompatibilities: Strong oxidizers may degrade peptides; avoid contact with strong acids/bases that can hydrolyze/denature.
Thermal stability: Avoid excessive heat; peptides can decompose/char on strong heating.
Environmental: Avoid release to drains in bulk; peptides are biodegradable, but follow institutional waste procedures.
Always consult the product’s SDS for authoritative hazard, exposure limits, and emergency procedures specific to this item/lot.
Solvent Selection
Item-specific solubility: Not specified for this item; refer to CoA/Spec Sheet.
General guidance for peptide mixtures (literature/general)
Primary solvent: Water is the solvent of choice. Most collagen-derived peptide hydrolysates are readily soluble in water at room temperature.
pH effects: Solubility typically remains high over pH 2–9; near aggregate-prone pI ranges, transient haze can occur. Adjusting pH slightly acidic (~pH 5–6) can improve clarity for some mixtures.
Ionic strength: Moderate salt can shield charges and either aid dissolution or promote salting-out, depending on composition. Start with low ionic strength buffers, then titrate as needed.
Organic co-solvents: Low percentages of ethanol or acetonitrile can be used to assist filtration or LC loading, but high proportions often reduce solubility and may precipitate peptides.
Temperature: Gentle warming (e.g., 25–37 °C) and stirring/sonication typically accelerates dissolution without degrading peptides.
Practical tips
Pre-wet powders before bulk addition to avoid clumping; add slowly under vigorous stirring.
Filter with 0.45–0.22 µm membranes if a particle-free solution is required; use low-protein-binding materials (PES, PVDF).
For MS-based workflows, avoid nonvolatile buffers; prefer water + 0.1% formic acid or ammonium formate/acetate as appropriate.
Alternatives to consider
If hydrophobic sequences dominate, consider mild denaturants (e.g., 1–2 M urea) or small amounts of isopropanol; test compatibility with your assay first.
Storage and Reconstitution
Item-specific instructions (from Product Data)
Storage conditions: Protected from light, Room temperature.
Shipped in: Normal conditions.
Reconstitution (item-specific details): Not specified for this item; refer to CoA/Spec Sheet.
General guidance for peptide mixtures (literature/general)
Reconstitution solvent: Water or assay buffer. Start at 5–20 mg/mL to create a convenient stock; adjust to application.
Technique: Add powder slowly under stirring to avoid clumps; gentle warming (≤37 °C) can assist dissolution. Filter if particle-free solutions are needed.
Working aliquots: Prepare single-use aliquots to reduce contamination and freeze–thaw cycles. Label with lot, concentration, and date.
Short-term storage of solutions: 2–8 °C for hours to a few days, preferably with microbial controls (e.g., sterile filtration, aseptic technique). Avoid preservatives unless compatible with downstream assays.
Long-term storage of solutions: −20 to −80 °C; protect from light. Thaw on ice; mix gently to re-homogenize.
Solid-state considerations: Keep container tightly closed, with desiccant if available. Peptides are moderately hygroscopic; limit ambient exposure to prevent caking.
Always defer to the lot-specific CoA/SDS for precise storage stability, allowable temperature excursions, and any recommended reconstitution media for this product.
Structure and Identity
Brief description: Ejiao Peptides are a heterogeneous mixture of low–molecular-weight peptides obtained by hydrolysis of collagen/gelatin derived from Ejiao (donkey-hide gelatin). As a natural peptide mixture, they do not have a single defined structure, SMILES, or InChIKey.
Item-specific facts (from Product Data)
Product name: Ejiao Peptides (SKU: E1526937)
Grade: BioReagent
CAS: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES / InChIKey: Not applicable for mixtures; not specified for this item.
Source and composition: Typically enriched in glycine, proline, and hydroxyproline residues, characteristic of collagen-derived peptides.
Structural features: Short oligopeptides (often 2–30 amino acids) with standard peptide backbones (–NH–CH(R)–CO–) and terminal amino/carboxyl groups; sequences and lengths are distributed rather than uniform.
2D structural depiction (in words): Repeating amide linkages connecting α-amino acid residues; side chains vary (aliphatic, imino for proline, acidic/basic/neutral residues) across the mixture.
Identity and characterization considerations (general)
Mixtures are commonly profiled by LC–MS peptide mapping, MALDI-TOF, SDS-PAGE (limited utility for <10 kDa), and amino acid analysis.
Batch-to-batch characteristics for peptide mixtures are typically controlled by hydrolysis conditions and defined by average MW distribution, peptide content (% w/w), and residual ash/moisture—consult the CoA for this specific lot.
Synthetic Utility
Scope: As a peptide mixture, Ejiao Peptides are not typical small-molecule building blocks. Their synthetic utility lies in serving as substrates, matrices, or precursors for fractionation and derivatization studies rather than defined stoichiometric reagents.
Uses in synthesis and derivatization (literature/general)
Starting material for generating defined oligopeptide fractions: controlled proteolysis with trypsin, chymotrypsin, collagenase, or non-specific proteases followed by SEC/HILIC/RP fractionation.
Chemical modifications: N-terminal acylation, amidation, labeling with fluorophores (e.g., NHS esters) or mass tags for tracing adsorption/uptake in materials science experiments.
Crosslinking/hydrogel formation: Reaction with carbodiimides (EDC/NHS) or genipin to form networks; evaluate gelation/film properties as a function of peptide size and composition.
Immobilization: Coupling to activated surfaces (epoxides, NHS-esters) to craft peptide-decorated interfaces for adhesion or protease-activity biosensors.
Retrosynthetic perspective
Not ideal for retrosynthesis due to undefined sequence distribution; instead, use as a surrogate matrix to benchmark methods before committing to expensive, sequence-defined peptides.
Practical considerations
Determine amine content (e.g., TNBS assay) to normalize stoichiometry in coupling reactions.
Monitor reactions via ninhydrin/TNBS for free amines and FTIR for amide band changes; confirm with LC–MS.
Target Specificity
This product is not an antibody, oligonucleotide, or targeted binding reagent. No antigen/epitope or species specificity applies.
Item-specific data (from Product Data)
Target/clone/isotype: Not applicable; not specified for this item.
For binding assays or biosensor work, any observed interactions would be emergent from the peptide mixture’s composition and should be empirically characterized for your system.
Precisa de ajuda para escolher o grau?
O nosso guia de seleção de graus abrange pureza, estado do estabilizador e adequação à aplicação para todas as variantes do nosso catálogo.
Usamos cookies para garantir o funcionamento adequado do site e, quando permitido, para melhorar a sua experiência. Você pode gerenciar suas preferências a qualquer momento nas Configurações. Saiba mais em nossa Política de Cookies.
Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?
Lembrar-me mais tarde
Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.