Laboratory Protocols & SOPs Library

Blood Agar Base, pH 7.4 (Powder)

Directions per Liter:

Dissolve 40grams per liter of distilled/deionized water, heating to boiling with stirring until completely solubilized.

Dispense into appropriate containers, loosen caps and autoclave for 15-30 minutes at 121ºC (15 psi).

Prepare 5 to 10% blood agar by adding the appropriate volume of sterile defibrinated blood to melted sterile agar medium.

Cool to 45-50°C. Dispense into Petri dishes or tubes


Component g/liter
Peptic Digest of Animal Tissue 10
Sodium Chloride 5
Heart Infusion Solids 10
Agar 15
Total: 40g/Liter


Storage and Stability:

Store powdered media at RT. Opened bottles should be capped tightly and kept in a dark, low humidity environment. Prepared media should be kept refrigerated and used within a short period of time.

Categories: Laboratory Protocols & SOPs Library

Da — when not otherwise indicated, molecular weight units are daltons.   Mw — weight-average molecular weight.   Mn — number-average molecular weight.

Products are supplied for research and development use only. Not for use in humans, animals, diagnosis, or therapy.

Cite this article

Aladdin Scientific. "Blood Agar Base, pH 7.4 (Powder)" Aladdin Knowledge Base, updated 09/06/2025. https://www.aladdinsci.com/eu_pt/faqs/blood-agar-base-ph-7-4-powder-en.html
Was this article helpful? Yes No 16 out 32 found this helpful

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.