Frequently Asked Questions: Products, Experiments and Troubleshooting

I purchased three flow-through antibodies, all sized at 50 μg, how many samples can I make?

· Published 13/09/2024 · Updated 09/06/2025

Antibodies packed in μg need to be titrated in a pre-test. We have not done any titration to find out the optimal amount of antibody to be used based on the recommended dosage, known antibody concentration, and our own cell samples, so we are unable to give a specific number of times to use the antibody.

Generally speaking, the number of times each antibody should be used in an experiment is once for a single tube and once for each whole tube (biological control and experimental group), that is to say, each antibody should be added at least 3 times in an experiment.

For more information, visit our website: www.aladdinsci.com.

Categories: Frequently Asked Questions: Products, Experiments and Troubleshooting

Explore topics: Flow-through Antibodies Antibody titration assay

Da — when not otherwise indicated, molecular weight units are daltons. Mw — weight-average molecular weight. Mn — number-average molecular weight.

Products are supplied for research and development use only. Not for use in humans, animals, diagnosis, or therapy.

Cite this article

Aladdin Scientific. "I purchased three flow-through antibodies, all sized at 50 μg, how many samples can I make?" Aladdin Knowledge Base, updated 09/06/2025. https://www.aladdinsci.com/eu_pt/faqs/i-purchased-three-flow-through-antibodies-en.html

Was this article helpful? Yes No 36 out 73 found this helpful