≥99% for sensitive chromatographic and analytical workflows requiring minimal baseline interference.
Protected from light,Store at -20°C Ships Ice chest + Ice pads Check lot-specific COA for exact specifications.
SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.
Cited in 0 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.
HKPerox-2 is a highly sensitive green fluorescent probe for the specific detection of H 2 O 2 in living cells with a maximum excitation wavelength and emission wavelength of 520 nm and 543 nm, respectively.
In Vitro
1. Preparation of HKPerox-2 working solution 1.1 Preparation of the stock solution Dissolve 1 mg HKPerox-2 in 172 μL DMF to obtain 10 mM of stock solution. Note: It is recommended to store the stock solution at -20℃ -80℃ away from light and avoid repetitive freeze-thaw cycles. 1.2 Preparation of HKPerox-2 working solution Dilute the stock solution in serum-free cell culture medium or PBS to obtain 1-10 μM of working solution. Note: Please adjust the concentration of HKPerox-2 working solution according to the actual situation. 2. Cell staining 2.1 Suspension cells (6-well plate) a. Centrifuge at 1000 g at 4℃ for 3-5 minutes and then discard the supernatant. Wash twice with PBS, 5 minutes each time.The cell density is 1×10 6 /mL b. Add 1 mL of working solution, and then incubate at room temperature for 5-30 minutes. c. Centrifuge at 400 g at 4℃ for 3-4 minutes and then discard the supernatant. d. Wash twice with PBS, 5 minutes each time. e. Resuspend cells with serum-free cell culture medium or PBS.Observation by fluorescence microscopy or flow cytometry. 2.2 Adherent cells a. Culture adherent cells on sterile coverslips. b. Remove the coverslip from the medium and aspirate excess medium. c. Add 100 μL of working solution, gently shake it to completely cover the cells,and then incubate at room temperature for 5-30 minutes. d. Wash twice with medium, 5 minutes each time.Observation by fluorescence microscopy or flow cytometry. MCE has not independently confirmed the accuracy of these methods. They are for reference only.
Form:Solid
| Peso molecular | 581.53 |
|---|
Comprehensive hazard, handling, storage, and regulatory compliance document.
Download SDS →Lot-specific quality data. Enter your lot number to retrieve the exact COA.
Look up COA →Full quality attributes and acceptance criteria for this grade.
View spec sheet →| Solubilidade | DMF : 50 mg/mL (85.98 mM; ultrasonic and warming and heat to 60°C) |
|---|
