mPEG amide acetaldehyde - MW 20000 Da

Cat. No.: m163977
Disponível para encomenda
GRAU & PUREZA MW 20000 Da
Storage
Room temperature
Shipped In
Normal
★
Tamanho
Alemanha (EU)
USA*
Preço
Qtd
250mg
m163977-250mg
Sob encomenda · 8–12 semanas
153,50€
1g
m163977-1g
Sob encomenda · 8–12 semanas
434,65€
Enter a quantity for the sizes you want to add.

Especificações

Especificações e pureza
MW 20000 Da
Condições de armazenamento de armazenamento
Room temperature
Enviado em
Normal

Dados avançados

Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
FAQs e artigos
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Application Protocols

No item-specific application protocols are provided for this SKU. Refer to primary literature and standard aldehyde-amine coupling procedures (e.g., reductive amination, oxime/hydrazone ligations) and validate conditions for your system. For authoritative safety and handling steps, consult the product SDS.

Biological Roles

This product is a synthetic reagent and not a native biomolecule. No biological roles are assigned to this specific item.

  • General context (literature):

    • Poly(ethylene glycol) is considered biologically inert, nonionic, and highly hydrophilic. When attached to biomolecules or surfaces, PEG can reduce protein adsorption and minimize nonspecific interactions.
    • Aldehyde functionalization enables site-preferential attachment to primary amines (e.g., N-termini of proteins) under controlled conditions for research purposes, aiding studies of structure–property relationships, surface passivation, and assay development.
    • PEG chains increase hydrodynamic radius and water compatibility of conjugated entities, which can impact diffusion and partitioning in biochemical assays (purely physicochemical effects; no therapeutic claims).
  • Notes:

    • Any biological behavior of conjugates prepared with this reagent depends on the partner molecule, conjugation site, and degree of substitution. Validate performance empirically for each application.
Buffer Applications
  • Item-specific buffer guidance: Not specified for this item; refer to CoA/Spec Sheet for any provided recommendations.

  • General buffer systems for aldehyde coupling (literature):

    • Reductive amination (amine + aldehyde → imine → reduced amine): Acetate or phosphate buffer, pH 5.5–6.5; avoid primary amine buffers (e.g., Tris, glycine). Typical total buffer concentration 50–200 mM. Add sodium cyanoborohydride or alternative selective reductant carefully under a fume hood.
    • Oxime formation (aminooxy + aldehyde): Acetate or citrate buffer, pH 4.5–5.5; 10–100 mM aniline catalyst can accelerate the reaction at room temperature. Oxime linkages are more hydrolytically stable than simple imines.
    • Hydrazone formation (hydrazide + aldehyde): Similar to oxime conditions; pH 4.5–6.0, optionally with aniline catalysis.
  • Practical buffer tips (general):

    • Degas buffers if working with oxygen-sensitive partners; maintain ionic strength compatible with biomolecule stability (e.g., 100–150 mM NaCl for many proteins).
    • Include chelators (e.g., 0.5–1 mM EDTA) only if metal-catalyzed side reactions are suspected; confirm compatibility with targets.
    • For work-up, quench excess aldehyde with ethanolamine or sodium bisulfite if needed, then desalt by dialysis or size-exclusion chromatography.
Green Alternatives
  • Scope: Green considerations for using aldehyde-functional mPEG in conjugation workflows center on solvent choice, catalysis, and minimizing auxiliary reagents rather than replacing the reagent itself.

  • Greener practice options (general):

    • Use aqueous buffers (acetate, phosphate, citrate) as primary media; limit DMF/DMSO to the minimum required for solubility.
    • Employ organocatalysts like aniline at low loadings to accelerate oxime/hydrazone formation at room temperature, reducing energy input.
    • Favor sodium triacetoxyborohydride or picoline borane as milder, less hazardous reductants in certain reductive aminations (literature), while validating selectivity.
    • Design high-solids or concentrated processes to reduce solvent volumes; recover and recycle DMSO/DMF where feasible.
  • Comparison snapshot (general; not item-specific):

    • Aqueous acetate buffer (pH 5.5–6.0): Renewable diluent, low hazard; may require longer reaction times.
    • 100% DMF: Excellent solubilization; higher worker and environmental burden; consider closed systems and solvent recovery.
    • Water + 10–20% DMSO: Balance of solubility and greener profile vs DMF; verify biomolecule stability.
  • Trade-offs:

    • Lower organic content improves EHS profile but can slow imine formation and increase aldehyde hydration; mild heating (20–30 C) and catalysis can offset this without harsh conditions.
Pharmaceutical Uses
  • Item-specific regulatory or pharmacopeial status: Not specified for this item; refer to CoA/Spec Sheet.

  • General context (no clinical claims):

    • PEG materials are widely used as excipients (solubilizers, viscosity modifiers) and as process aids in pharmaceutical development. Aldehyde-functional mPEGs are research-grade conjugation reagents used in process development or analytical model systems to study PEGylation strategies.
    • In formulation development, aldehyde-reactive PEGs can be applied to prototype conjugates for characterization of impact on solubility, aggregation propensity, and chromatographic behavior.
    • For manufacturing considerations, control of residual reagents (e.g., reducing agents, catalysts, solvents) and characterization of degree of substitution are critical; such controls are application- and specification-dependent and are not provided for this item.
  • Note: This product is labeled For research use only. It is not intended for use in humans or for clinical applications.

Physical Properties
  • Item-specific properties:

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight (Mn, Đ): Not specified for this item; refer to CoA/Spec Sheet.
    • Density, refractive index, UV cutoff: Not specified for this item; refer to CoA/Spec Sheet.
    • Solubility: Not specified for this item; refer to CoA/Spec Sheet.
  • General/literature characteristics for mPEG aldehyde reagents (context, not item-specific):

    • Physical state: Depending on Mn, mPEGs range from low-viscosity liquids (very low Mn) to waxy solids or powders (higher Mn). Aldehyde-functional mPEGs typically follow this trend.
    • Solubility profile: High solubility in water and polar organic solvents (e.g., methanol, ethanol, DMF, DMSO); gradual decrease in water solubility can occur with very high Mn. Often miscible with water at moderate Mn.
    • Thermal behavior: PEGs exhibit a glass transition and, for certain Mn, a melting range rather than a sharp melting point; boiling point is not meaningful due to polymeric nature.
    • Hygroscopicity: PEGs are mildly hygroscopic; aldehydes can form hydrates in aqueous environments.
    • Partitioning: PEG chains impart hydrophilicity; logP is not meaningful for polymer distributions but effective hydrophilicity is high.
  • Practical implications (general):

    • Aldehyde end groups may undergo hydration in water and slow oxidation to acids; preserve under dry conditions to maintain functionality.
    • Viscosity increases with concentration and molecular weight; warm gently to aid dissolution if needed (do not overheat functional aldehydes).
Quality and Grades
  • Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

  • What to look for in aldehyde-terminated mPEG (general guidance for professional users):

    • End-group integrity: Aldehyde content verified by end-group titration or 1H NMR integration (CHO signal), and low level of over-oxidized acid end groups.
    • Polydispersity: Reported Đ (Mw/Mn) indicative of polymer distribution; narrower Đ can improve batch-to-batch reproducibility in conjugations.
    • Residuals: Low residual solvent, catalyst, and inorganic salts. For sensitive bioconjugations, low bioburden and endotoxin may be important (if specified by the supplier; not specified here).
    • Stabilizers: Some aldehyde PEGs are shipped without stabilizers; others may include trace acid scavengers. For this item, stabilizers are Not specified for this item; refer to CoA/Spec Sheet.
    • Analytical package: Typical documentation includes 1H/13C NMR, FTIR (C=O ~1720–1740 cm−1 for amide; ~1720 cm−1 for aldehyde), GPC/SEC for Mn/Đ, and aldehyde assay.
  • Implications for use (general):

    • Higher end-group conversion translates to more efficient conjugations and predictable loading on biomolecules or surfaces.
    • When UV-sensitive analytics are needed, confirm low UV-absorbing impurities; aldehydes can show weak n→π* absorbance but PEG backbone is largely transparent above ~220 nm.
Reaction and Applications
  • Core reactivity (general, literature):

    • The terminal acetaldehyde reacts with nucleophiles to form imines (Schiff bases) with primary amines, hydrazones with hydrazides, and oximes with aminooxy groups. These linkages can be reduced (e.g., NaBH3CN) to stable secondary amines (for imines) or further stabilized under appropriate conditions.
  • Representative applications in research and materials science (examples; no clinical claims):

    • Protein/peptide PEGylation via N-terminal reductive amination at mildly acidic pH (N-termini are more nucleophilic/accessible than lysine side chains under certain conditions), improving solubility and reducing nonspecific interactions for analytical or process studies.
    • Conjugation to small-molecule amines to modulate pharmacokinetic-like properties in model systems (e.g., increase aqueous solubility for in vitro assays).
    • Surface modification of nanoparticles, resins, or planar substrates bearing amine/hydrazide functionalities to impart antifouling and hydrophilic character.
    • Capture/release strategies using reversible imine/hydrazone/oxime linkages in microfluidics or sensing, where PEG spacing reduces steric hindrance.
  • Practical considerations (general):

    • Prefer buffers without primary amines (avoid Tris, glycine) during coupling; use phosphate, acetate, or citrate.
    • Aniline catalysis (10–100 mM) can accelerate oxime/hydrazone formation significantly at pH 4.5–6.0.
    • Reductive amination: Maintain pH ~6.0 with sodium cyanoborohydride (or alternative selective reductants) to drive formation of stable secondary amines from imines.
    • Monitor conversions by SEC, SDS-PAGE (for proteins), or HPLC after derivatization; confirm by mass spectrometry when applicable.
Reaction Conditions

The following are general literature guidelines for aldehyde-terminated mPEG reagents; they are not item-specific specifications.

  • Reductive amination (amine + aldehyde):

    • Solvent: 50–200 mM acetate or phosphate buffer, pH 5.5–6.5; optional 0–30% DMF or DMSO as cosolvent.
    • Reagents: 5–50 mM sodium cyanoborohydride (or picoline borane, sodium triacetoxyborohydride in compatible media).
    • Temperature/time: 20–25 C, 2–24 h, depending on substrate accessibility and concentration.
    • Stoichiometry: 1.2–10 equiv mPEG-aldehyde per amine site for biomolecules, adjusted to desired degree of substitution.
    • Notes: Avoid primary amine buffers (Tris); maintain mild acidity to favor iminium formation and selectivity for N-termini on proteins.
  • Oxime ligation (aminooxy + aldehyde):

    • Solvent: 100 mM acetate or citrate buffer, pH 4.5–5.5; water as primary medium.
    • Catalyst: Aniline 10–100 mM can accelerate; optional 1–10 mM p-phenylenediamine variants per literature.
    • Temperature/time: 20–25 C, 0.5–6 h typical; often faster than imine formation.
    • Notes: Oximes exhibit enhanced hydrolytic stability relative to imines; no reducing agent required.
  • Hydrazone formation (hydrazide + aldehyde):

    • Solvent: Acetate buffer, pH 4.5–6.0; optional aniline catalysis.
    • Temperature/time: 20–25 C, 1–8 h.
  • Work-up and analysis:

    • Desalt/purify via dialysis, SEC, or spin columns for biomacromolecules; precipitation or ultrafiltration for nanoparticles/polymers.
    • Characterize by SEC-MALS (for polymers), MS (for peptides/proteins, if mass range permits), and NMR for small-molecule conjugates.
Safety and Handling
  • GHS classification and hazards (item-specific):

    • Signal Word: Not specified for this item; refer to SDS.
    • Hazard Statements (H-Statements): Not specified for this item; refer to SDS.
    • Pictograms: Not specified for this item; refer to SDS.
    • GHS Classification: Not specified for this item; refer to SDS.
  • General safety guidance for aldehyde-functional PEGs (literature/good practice):

    • Primary hazards: Low volatility and generally low acute toxicity are typical for PEGs; however, aldehyde end groups can be irritant and reactive toward nucleophiles (amines, hydrazines). Avoid inhalation of dusts/aerosols and skin/eye contact.
    • PPE: Lab coat, safety glasses, and appropriate chemically resistant gloves (e.g., nitrile). Use in a fume hood when weighing or when handling reactive reducing agents (e.g., sodium cyanoborohydride) associated with coupling.
    • Incompatibilities: Strong oxidizers (can over-oxidize aldehydes), strong reducing agents (can reduce aldehydes unintentionally), strong acids/bases (may accelerate side reactions or degradation). Aldehydes can form imines with amines; store away from amine-containing reagents to prevent adventitious reactions.
    • First aid (overview; consult SDS): Rinse thoroughly with water for eye/skin contact; remove contaminated clothing. If inhaled, move to fresh air. If ingested, rinse mouth; seek medical advice.
    • Waste: Collect aldehyde-containing and PEG-containing waste according to institutional and local regulations; avoid release to drains.
    • Special notes: Ethers generally can form peroxides on prolonged exposure to air, but PEG backbones are far less prone than low-MW ethers; nonetheless, avoid unnecessary prolonged heating with air exposure. Protect aldehyde functionality from moisture to limit hydrate formation.

Always consult the product’s SDS for definitive hazard and handling information.

Solvent Selection
  • Applicability: This section addresses selecting media to dissolve and use mPEG amide acetaldehyde in coupling workflows.

  • General solvent behavior (literature):

    • Polarity: Highly polar, protophilic polymer; excellent compatibility with water and polar organics (DMSO, DMF, methanol, ethanol). Limited solubility in nonpolar hydrocarbons.
    • Miscibility: Often fully miscible with water at modest Mn; co-solvent systems (water/DMF or water/DMSO) are common when substrates are partially water-insoluble.
  • Choosing solvents by application (general):

    • Reductive amination to primary amines on biomolecules: Aqueous buffers (acetate or phosphate, pH ~5.5–6.5) with 0–30% DMF/DMSO as needed to solubilize hydrophobic targets.
    • Oxime/hydrazone formation (with aminooxy/hydrazide partners): Acetate or citrate buffer, pH ~4.5–5.5; aniline (10–100 mM) can catalyze imine/oxime formation.
    • Surface/particle functionalization: Use solvent that swells or wets the substrate (e.g., water/alcohol for hydrophilic surfaces; DMF for some polymers).
  • Practical tips (general):

    • Pre-dry solvents for maximum aldehyde reactivity; water promotes hydrate formation and can slow coupling.
    • Maintain moderate ionic strength to keep biomolecules stable while allowing aldehyde access; avoid strong amines (e.g., Tris) in buffers during aldehyde chemistry, as they compete for reaction.
  • Quick comparison (general):

    • Water/acetate buffer (pH 5.5–6.0): Biocompatible, greener; slower kinetics without catalyst.
    • DMF/DMSO co-solvent: Improves solubility; may require desalting post-reaction.
Storage and Reconstitution
  • Item-specific storage and shipping:

    • Storage Conditions: Room temperature (per Product Data). Keep container tightly closed in a dry, well-ventilated place.
    • Shipped In: Normal (per Product Data).
  • Stability notes (general good practice, not item-specific specs):

    • Protect the aldehyde end group from prolonged moisture and air to limit hydrate formation and oxidation. For extended storage, consider desiccation and inert atmosphere.
    • Avoid repeated freeze–thaw of solutions; prepare fresh solutions for critical conjugations.
  • Reconstitution:

    • Not specified for this item; refer to CoA/Spec Sheet.
    • General guidance (literature): Dissolve just prior to use in water, acetate/phosphate buffer (amine-free), or polar aprotic solvent (e.g., DMSO, DMF) as compatible with your substrate. Filter (0.22 μm) if needed for bioconjugation workflows.
  • Research Use Note: For research use only.

Structure and Identity

This item is a methoxy poly(ethylene glycol) (mPEG) reagent bearing an amide spacer and a terminal acetaldehyde functionality intended for conjugation chemistry.

  • Item-specific identifiers:

    • CAS: Not specified for this item; refer to CoA/Spec Sheet.
    • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet. (Note: mPEG reagents are typically polydisperse; Mn/Mw are reported as averages.)
  • Structural description (general, literature):

    • Backbone: Repeating –CH2–CH2–O– units (polyethylene glycol), capped at one end with a methoxy group (–O–CH3).
    • Linker: An amide linkage embedded near the functional end provides stability and defines spacing to the terminal handle.
    • Functional group: Terminal acetaldehyde (–CH3–CHO) or aldehyde-presenting end capable of forming imines/oximes/hydrazones.
    • Topology: Linear, nonionic, flexible polymer chain; no stereogenic centers in the PEG backbone.
  • 2D structure in words (general): A linear PEG chain ends on one side with a methoxy cap; the other side bears an amide-connected short spacer terminating in an aldehyde (acetyl) group suitable for chemoselective coupling.

  • Notes on identity reporting for PEGs (general): For PEG reagents, identity is commonly documented by average molecular weight (Mn), polydispersity index (Đ), and functional group titration or NMR end-group analysis. Please consult the product’s CoA/Spec Sheet for the exact average Mn and end-group assay for this SKU (m163977).

Synthetic Utility
  • Functional handles (general):

    • Terminal aldehyde: Engages in nucleophilic addition/condensation with amines (imine formation), hydrazides (hydrazones), and aminooxy groups (oximes). Imine adducts can be chemoselectively reduced to stable secondary amines.
    • PEG spacer: Provides hydrophilic separation between coupled partners, mitigating steric hindrance and reducing nonspecific interactions in complex media.
    • Amide linker: Hydrolytically robust connection between PEG chain and terminal functional group, enhancing stability during synthesis and purification.
  • Typical transformations (literature):

    • Reductive amination with primary amines using sodium cyanoborohydride or picoline borane at pH ~6.0 to afford secondary amine-linked PEG conjugates.
    • Oxime ligation with aminooxy-functional substrates at mildly acidic pH; often proceeds efficiently at room temperature, especially with aniline catalysis.
    • Hydrazone formation with hydrazide-functional materials; subsequent stabilization possible via reduction or pH optimization.
    • Immobilization of amine-bearing small molecules on PEGylated supports for affinity matrices or sensor surfaces.
  • Retrosynthetic value (general):

    • The aldehyde end group provides convergent late-stage attachment to complex amine-containing partners, enabling modular assembly without protecting groups under mild, aqueous-compatible conditions.
    • Orthogonality: Compatible with many thiol- or azide-bearing motifs present elsewhere on targets when conditions are chosen judiciously (e.g., absence of strong nucleophiles that would compete).
Target Specificity

Not applicable to this product. This is a non-biological small-molecule/polymer reagent without antigen/epitope specificity. No clone, isotype, or species reactivity information applies.

Perguntas frequentes

How should this product be stored?
Store at room temperature.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.