GRAU & PUREZABioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Trypan Blue is an anionic active dye and the most commonly used reagent for identifying dead cells in cell and tissue culture. The staining principle is based on the fact that viable cells possess intact membranes that exclude the dye, preventing its entry; whereas cells that have lost viability or membrane integrity exhibit increased permeability, allowing Trypan Blue to penetrate and stain the cells blue to pale blue. This enables a simple and rapid distinction between live and dead cells. Trypan Blue can also be phagocytosed by macrophages, making it applicable for in vivo macrophage staining.
After staining, cell viability can be quantified by direct microscopic counting or image-based counting, using the formula: Cell Viability (%) = (Total Cells − Blue-Stained Cells) ÷ Total Cells × 100%. The procedure is straightforward, requiring only 3–5 minutes of staining at room temperature.
Note: Prolonged staining should be avoided, as extended incubation may lead to dye uptake by viable cells, resulting in underestimated viability. Trypan Blue is potentially toxic and classified as a suspected carcinogen; appropriate personal protective equipment (lab coat and disposable gloves) should be worn during handling.
For research use only. Not for clinical diagnosis.
Especificações
Especificações e pureza
BioReagent
Condições de armazenamento de armazenamento
Store at 2-8°C
Enviado em
Wet ice
Este produto requer transporte de cadeia fria. Serviços terrestres e outros serviços econômicos não estão disponíveis.
Grau
BioReagent
Product Line
Produtos biológicos
Dados avançados
Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluções
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Revisões
Avaliações dos Clientes
Application Protocols
General procedures below are literature guidance for using a 1% trypan blue staining solution. Optimize for your cell type and instrumentation.
A. Manual hemocytometer counting (brightfield)
Prepare sample: Gently resuspend cells to a single-cell suspension in isotonic buffer.
Dilution: Mix cells with dye to achieve a final trypan blue concentration of ~0.4% (literature common practice). Example: 1 part 1% stain + 1.5 parts cell suspension yields ~0.4% final; adjust ratios to suit cell density.
Incubation: 2–5 min at room temperature. Avoid >10 min to limit false positives.
Load 10 µL into a cleaned hemocytometer chamber; apply coverslip.
Imaging: Brightfield, 10×–20× objective. Count unstained (viable) and blue (non-viable) cells in standard grid squares.
Calculations: Viability (%) = 100 × [viable / (viable + non-viable)]. Account for dilution factor in total cell concentration.
B. Automated cell counter (trypan blue mode)
Instrument: Select trypan blue assay and appropriate chamber slides.
Sample prep: As above; aim for instrument-recommended concentration (often 1–10 × 10^5 cells/mL; check instrument manual).
Mixing: Prepare final ~0.4% dye mixture; load per device instructions.
QC: Verify focus and segmentation on a test field; compare with manual count for first-time runs.
Notes
Perform counts promptly after mixing; maintain isotonicity and ambient temperature.
Dispose of dye-containing waste as hazardous aqueous chemical waste per EHS policy.
Biological Roles
Trypan blue has no biological role in living systems; it functions as a non-permeant exclusion dye to report on plasma membrane integrity (literature).
Principle (literature):
Viable cells with intact membranes exclude trypan blue due to the dye’s high polarity and anionic charge (multiple sulfonate groups). They remain unstained and optically clear under brightfield.
Non-viable cells with compromised membranes permit entry; intracellular binding of the dye yields a deep blue appearance, enabling rapid dead/viable discrimination.
Applications in life science workflows:
Pre- and post-treatment viability checks for culture maintenance, seeding density calculations, and QC before sensitive assays (e.g., RNA-seq library prep, CRISPR editing, or primary cell processing).
Yeast and fungal cell counting, with attention to cell wall permeability differences.
Assessment of cytotoxic effects in screening experiments when fluorescence instrumentation is not required or available.
Limitations (literature):
Borderline/apoptotic cells may slowly take up dye—timing is critical to avoid overestimation of non-viable cells.
Does not distinguish early apoptotic from late apoptotic/necrotic cells; complementary markers (Annexin V/PI) are recommended for mechanistic studies.
Proteinaceous media can alter background; perform counts promptly after mixing.
Note: This product is for research use only and is not intended for diagnostic procedures.
Buffer Applications
This is a staining solution rather than a buffering agent. However, its performance depends on the diluent and ionic environment (general guidance):
Compatible diluents (literature): isotonic saline, PBS, HBSS without phenol red. Ensure osmolarity ~280–320 mOsm to preserve membrane integrity during counting.
Serum effects: serum proteins can increase background or alter apparent dye uptake over time; perform counts promptly (within minutes) after mixing.
Additives: Avoid detergents or permeabilizing agents unless intentionally assessing membrane permeability—they will artifactually increase positive staining.
pH: Maintain physiological pH (~7.2–7.4) for mammalian cells during staining (literature). Exact pH of this item’s solution is not specified; refer to CoA/Spec Sheet.
If a defined buffer composition is critical to your workflow, verify the product’s formulation and adjust with a validated isotonic buffer.
Green Alternatives
While this product is an aqueous solution (favorable from a solvent perspective), the active dye trypan blue is hazardous and persistent. Consider greener or safer alternatives where suitable for your assay design.
Alternative viability indicators (literature):
Propidium iodide (PI) or 7-AAD (nucleic acid dyes) for flow cytometry—offer high sensitivity but require instrumentation and appropriate waste handling.
SYTOX Green/SYTOX Blue (membrane-impermeant nucleic acid dyes) for plate-based or imaging assays with lower volumes.
Erythrosin B as an alternative dye-exclusion reagent reported with lower hazard classification in some jurisdictions; validate for your cell type.
PI/7-AAD/SYTOX: higher sensitivity/throughput; require fluorescence optics; phototoxicity and specific waste considerations.
Environmental practices:
Minimize working volumes; use micro-chambers/automated counters to reduce waste.
Segregate dye-containing waste; consider adsorptive cleanup (e.g., activated carbon) before disposal if permitted by local regulations.
Replace routine viability checks with instrument-based low-volume assays when feasible to reduce chemical footprint.
Always validate alternatives for your specific cell system and analysis method.
Pharmaceutical Uses
Not applicable as a pharmaceutical excipient. Trypan blue staining solutions are used in research and quality-control laboratory settings for assessing cell viability. They are not intended for human or veterinary administration.
Pharmacopeial status: No pharmacopeial monograph is typically applied to trypan blue staining solutions used for research (literature). Any regulatory use would require separate qualification.
Manufacturing context: In bioprocess development or cell therapy research (non-clinical), trypan blue may be used for in-process control of viable cell density prior to scale-up steps. For GMP/clinical manufacturing, alternative validated methods are generally preferred.
Always observe the "For research use only" restriction for this product.
Physical Properties
Appearance: Not specified for this item; refer to CoA/Spec Sheet. (Typical for trypan blue solutions: deep blue aqueous liquid; literature.)
Concentration: 1% (w/v) trypan blue dye (per product name).
pH, osmolarity, buffer constituents: Not specified for this item; refer to CoA/Spec Sheet.
Boiling point, melting point, refractive index, density: Not specified for this item; refer to CoA/Spec Sheet. (As an aqueous solution, bulk properties largely follow those of water with dye- and buffer-dependent deviations; general statement.)
Solubility: Trypan blue is highly water-soluble due to multiple sulfonate groups (literature). Solubility in organic solvents is poor (literature).
Spectral features (literature, dye-only): strong visible absorption in the blue region; typical λmax for trypan blue reported around 580–610 nm depending on medium and concentration; exact values depend on ionic strength and pH.
Because this is a formulated solution, definitive physicochemical specifications (e.g., pH, ionic strength, UV cutoffs) must be obtained from the item’s CoA/Spec Sheet.
Quality and Grades
Grade: BioReagent.
Meaning (general): BioReagent grade indicates suitability for common life-science workflows (cell culture handling, microscopy staining, general biochemical use), emphasizing low particulate burden and consistent performance. It does not imply sterile/clinical suitability.
UV-Vis profile, endotoxin, bioburden, and heavy metal limits: Not specified for this item; refer to CoA/Spec Sheet.
Lot-to-lot consistency: Dyes can vary in absorbance characteristics and background signal; BioReagent grade typically targets controlled dye content and performance in viability assays.
Stabilizers and preservatives: Not specified for this item; refer to CoA/Spec Sheet. Presence or absence of antimicrobial preservatives (e.g., sodium azide) should be verified on the CoA if relevant to your workflow.
Application suitability:
Optimized for dye-exclusion staining of non-fixed cells and microscopic enumeration.
Not intended for diagnostic or therapeutic use.
Documentation: For quantitative or regulated studies, confirm solution concentration, pH, and any excipients on the lot-specific CoA/Spec Sheet before use.
Reaction and Applications
This material is not a synthetic reagent; it is a biological stain used for viability assessment by dye exclusion.
Primary application (literature): rapid discrimination of membrane-compromised (non-viable) cells, which take up trypan blue and appear blue under brightfield microscopy, versus viable cells, which exclude the dye and remain unstained.
Typical use cases:
Manual cell counting with a hemocytometer (mammalian cells, yeast, primary cells).
Sample quality control before downstream workflows (transfection, flow cytometry, single-cell prep, viability-sensitive assays).
Calibration/validation of automated cell counters configured for trypan blue detection.
Practical tips (general):
Work quickly; prolonged incubation can lead to overestimation of non-viable cells as borderline cells slowly take up dye.
Maintain isotonic conditions and ambient temperature to avoid artifactual permeability changes.
Gently mix to avoid bubbles that interfere with hemocytometer grid visualization.
Use clean coverslips and chambers; dye strongly stains residues and plastics.
For detailed step-by-step methods, see Application Protocols.
Reaction Conditions
Not applicable to chemical synthesis. For experimental conditions relevant to this product, see Application Protocols for guidance on cell staining ratios, incubation times, and counting workflows.
Safety and Handling
GHS/CLP for this specific item: Not specified for this item; refer to the product SDS for authoritative hazard and precautionary statements.
General safety information (literature/typical for trypan blue solutions):
Trypan blue is widely treated as hazardous; literature notes potential mutagenicity and reproductive toxicity concerns for the dye. Avoid inhalation, ingestion, and skin/eye contact. Use in a chemical fume hood or well-ventilated area.
PPE: lab coat, safety glasses or face shield, and suitable chemical-resistant gloves (e.g., nitrile). Avoid creating aerosols or mists. Practice good hygiene; do not pipette by mouth.
First aid (general): in case of skin contact, wash with soap and water; for eye exposure, rinse cautiously with water for several minutes and seek medical attention; if inhaled, move to fresh air; if ingested, rinse mouth—seek medical attention. Always follow SDS instructions.
Handling notes:
Prevent staining of surfaces; trypan blue strongly colors porous materials. Keep containers tightly closed when not in use.
Incompatibilities: strong oxidizers may degrade azo dyes; avoid mixing with strong acids/bases unless procedure requires and compatibility is confirmed (general guidance).
Waste: Collect dye-containing waste as hazardous aqueous chemical waste; do not discharge to drains. Follow institutional and local regulations.
Transport/storage abnormalities: If shipped cold, allow to equilibrate to room temperature before opening to minimize condensation and contamination.
Always defer to the SDS and institutional EHS policies for final guidance.
Solvent Selection
This product is an aqueous staining solution intended to be used as supplied or diluted with compatible aqueous buffers. Organic solvent selection is not typically applicable.
Preferred diluents (general practice): phosphate-buffered saline (PBS), balanced salt solutions (e.g., HBSS), or isotonic saline to maintain cell osmotic balance during viability assessment.
Avoid: non-aqueous solvents and hypotonic media that can compromise membrane integrity and give false-positive staining.
Miscibility: Readily miscible with water and common physiological buffers (literature, dye property). Confirm compatibility with any serum-containing media as proteins can modestly affect dye background.
For protocol-relevant guidance, see Application Protocols and Biological Roles.
Storage and Reconstitution
Storage conditions (item-specific): Store at 2–8°C. Shipped on wet ice.
Freeze-thaw: Not specified for this item; refer to CoA/Spec Sheet. As general practice, avoid freezing aqueous dye solutions unless validated—freeze-thaw can cause precipitation or concentration shifts.
Light sensitivity: Many dyes are light sensitive (general). Store in the original, tightly closed, light-protective container.
Stability/shelf life: Not specified for this item; refer to CoA/Spec Sheet. Inspect for precipitation, microbial growth, or color change before use.
Reconstitution: Not applicable; this is a ready-to-use 1% solution. If alternate working concentrations are required, dilute with sterile isotonic buffer (e.g., PBS) under aseptic technique as needed for your application (general guidance).
Handling tips:
Warm to room temperature before aliquoting to reduce condensation.
Consider preparing single-use aliquots to minimize contamination and repeated temperature cycling.
Label secondary containers with product name, concentration, lot, and date of dilution.
Always consult the lot-specific CoA/Spec Sheet and SDS for definitive storage and handling instructions.
Structure and Identity
Trypan Blue Staining Solution (1%) is a ready-to-use aqueous staining reagent for dye-exclusion viability assessment in cell biology.
Item-specific identifiers (CAS, CID, InChIKey, SMILES, molecular formula, molecular weight): Not specified for this item; refer to CoA/Spec Sheet.
Composition: 1% (w/v) trypan blue dye in water or buffered aqueous medium (general description; exact formulation not specified for this item).
Structural features of the active dye (literature):
Trypan blue is an anionic, sulfonated diazo dye (azo–azo linked aromatic system) typically supplied as a tetrasodium salt.
Functional groups: two azo (–N=N–) linkages; multiple sulfonate (–SO3−) groups conferring high water solubility; aromatic rings; amine substituents.
2D description (literature): two substituted naphthalene/benzidine-like aromatic halves connected via azo linkages, each bearing sulfonate groups; highly conjugated chromophore responsible for deep blue coloration.
Stereochemistry: not applicable (azo dye without stereogenic centers).
Note: Structural identifiers above are general literature information about the trypan blue dye and are not item-specific specifications.
Synthetic Utility
Not applicable. This product is a formulated biological stain and is not typically employed as a reagent or intermediate in synthetic organic chemistry. For practical use, refer to Biological Roles and Application Protocols.
Target Specificity
Not applicable. This product is not an antibody or affinity reagent and does not possess antigen/epitope specificity. Trypan blue functions as a membrane-impermeant exclusion dye (literature) rather than a target-specific probe.
Precisa de ajuda para escolher o grau?
O nosso guia de seleção de graus abrange pureza, estado do estabilizador e adequação à aplicação para todas as variantes do nosso catálogo.
Usamos cookies para garantir o funcionamento adequado do site e, quando permitido, para melhorar a sua experiência. Você pode gerenciar suas preferências a qualquer momento nas Configurações. Saiba mais em nossa Política de Cookies.
Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?
Lembrar-me mais tarde
Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.