Trypsin Solution

Cat. No.: T753835

GRAU & PUREZA BioReagent, for Cell culture, Sterile

Visão geral

Component No.	Component Name	Specification	Size	Storage
T753835‑TR‑100ml	Trypsin Cell Dissociation Solution	0.25% Trypsin, with phenol red, with EDTA	100 mL	Store at −20 °C. Avoid freeze/thaw cycles.
T753835‑WE‑100ml	Trypsin Cell Dissociation Solution	0.25% Trypsin, without phenol red, without EDTA	100 mL	Store at −20 °C. Avoid freeze/thaw cycles.
T753835‑WW‑100ml	Trypsin Cell Dissociation Solution	0.25% Trypsin, with phenol red, without EDTA	100 mL	Store at −20 °C. Avoid freeze/thaw cycles.

Tissue‑cell dissociation solution is applied for tissue dissociation to prepare single‑cell suspensions in in‑vitro tissue culture and primary cell culture, as well as for detachment of adherent cells during subculture. Composed of trypsin, EDTA, phenol red and other components, it hydrolyzes intercellular proteins such as extracellular matrix, dissociating tissues or adherent cells into single‑cell suspensions for downstream experiments.

Sterilized by filtration, Trypsin Cell Dissociation Solution is ready‑to‑use for dissociation of cultured cells and tissues. It features convenient operation, fast processing, high stability, good safety and favorable cell viability. Most adherent cells can be dissociated within approximately 2 min at room temperature. Phenol red serves as a pH indicator.

Instructions for Use

1. Dissociation of adherent cells

1.1 Remove culture medium. Rinse cells once with sterile PBS, Hanks’ balanced salt solution or serum‑free medium to eliminate residual serum.

1.2 Add a minimal volume of trypsin dissociation solution to just cover the cell monolayer. Incubate at room temperature for 1‑2 min. Incubation time varies among cell types; extend incubation appropriately for strongly adherent cells.

1.3 Monitor under microscope: stop when cells exhibit obvious shrinkage, morphological alteration at the bottom of culture vessels, or can be gently dislodged by pipetting. Remove dissociation solution. Add serum‑supplemented complete medium and pipette to harvest cells for subsequent experiments.

1.4 If dissociation is insufficient, add fresh trypsin solution and repeat digestion.

1.5 If over‑digestion occurs and partial cells detach before pipetting, pipette to harvest all cells directly in trypsin solution. Centrifuge at 1000‑2000 g for 1 min to pellet cells. Remove trypsin supernatant as much as possible, then resuspend cell pellet in serum‑containing complete medium for downstream use.

2. Tissue dissociation

Digestion time varies greatly for different tissues. Terminate digestion when tissues can be fully triturated.

Precautions

1. Optimal digestion time should be determined empirically according to specific tissue or cell types. Over‑digestion impairs cell attachment and proliferation.

2. This product contains no bacteriostatic agents. Strict aseptic manipulation is required to prevent microbial contamination.

3. Do not store long‑term at 4 °C. Avoid repeated freeze‑thaw cycles. Aliquot for long‑term storage.

4. Wear laboratory coat and disposable gloves for personal protection during handling.

Component No.	Component Name	Specification	Size	Storage
T753835‑TR‑100ml	Trypsin Cell Dissociation Solution	0.25% Trypsin, with phenol red, with EDTA	100 mL	Store at −20 °C. Avoid freeze/thaw cycles.
T753835‑WE‑100ml	Trypsin Cell Dissociation Solution	0.25% Trypsin, without phenol red, without EDTA	100 mL	Store at −20 °C. Avoid freeze/thaw cycles.
T753835‑WW‑100ml	Trypsin Cell Dissociation Solution	0.25% Trypsin, with phenol red, without EDTA	100 mL	Store at −20 °C. Avoid freeze/thaw cycles.

Tissue‑cell dissociation solution is applied for tissue dissociation to prepare single‑cell suspensions in in‑vitro tissue culture and primary cell culture, as well as for detachment of adherent cells during subculture. Composed of trypsin, EDTA, phenol red and other components, it hydrolyzes intercellular proteins such as extracellular matrix, dissociating tissues or adherent cells into single‑cell suspensions for downstream experiments.

Sterilized by filtration, Trypsin Cell Dissociation Solution is ready‑to‑use for dissociation of cultured cells and tissues. It features convenient operation, fast processing, high stability, good safety and favorable cell viability. Most adherent cells can be dissociated within approximately 2 min at room temperature. Phenol red serves as a pH indicator.

Instructions for Use

1. Dissociation of adherent cells

1.1 Remove culture medium. Rinse cells once with sterile PBS, Hanks’ balanced salt solution or serum‑free medium to eliminate residual serum.

1.2 Add a minimal volume of trypsin dissociation solution to just cover the cell monolayer. Incubate at room temperature for 1‑2 min. Incubation time varies among cell types; extend incubation appropriately for strongly adherent cells.

1.3 Monitor under microscope: stop when cells exhibit obvious shrinkage, morphological alteration at the bottom of culture vessels, or can be gently dislodged by pipetting. Remove dissociation solution. Add serum‑supplemented complete medium and pipette to harvest cells for subsequent experiments.

1.4 If dissociation is insufficient, add fresh trypsin solution and repeat digestion.

1.5 If over‑digestion occurs and partial cells detach before pipetting, pipette to harvest all cells directly in trypsin solution. Centrifuge at 1000‑2000 g for 1 min to pellet cells. Remove trypsin supernatant as much as possible, then resuspend cell pellet in serum‑containing complete medium for downstream use.

2. Tissue dissociation

Digestion time varies greatly for different tissues. Terminate digestion when tissues can be fully triturated.

Precautions

1. Optimal digestion time should be determined empirically according to specific tissue or cell types. Over‑digestion impairs cell attachment and proliferation.

2. This product contains no bacteriostatic agents. Strict aseptic manipulation is required to prevent microbial contamination.

3. Do not store long‑term at 4 °C. Avoid repeated freeze‑thaw cycles. Aliquot for long‑term storage.

4. Wear laboratory coat and disposable gloves for personal protection during handling.

Especificações

Product Name

Trypsin Solution

Sinónimos

Trypsin Solution | Trypsin | Trypsin-EDTA Solution

Grau

BioReagent, for Cell culture, Sterile

Especificações e pureza

BioReagent, for cell culture, sterile

Tipo de molécula

Bioreagents/Buffer

Product Line

Produtos biológicos

Armazenamento e envio

Condições de armazenamento de armazenamento

Store at -20°C,Avoid repeated freezing and thawing

Enviado em

Ice chest + Ice pads

Estabilidade e armazenamento

Store at -20°C long term (24 months). Upon receipt, it is recommended to aliquot. Avoid freeze/thaw cycle.

Perguntas frequentes

What does for cell culture mean?

for cell culture indicates that the product has been processed and tested for cell culture and tissue engineering. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.

What does BioReagent mean?

BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.

How should this product be stored?

Store at ?20 °C. Avoid repeated freeze–thaw cycles. Aliquot into single-use volumes before freezing.

How is this product shipped?

This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.

What documentation is provided?

Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.